The BEST MT09 Bar End Aftermarket Mirror Install *🔥🔥WARNING 🔥🔥*

The BEST MT09 Bar End Aftermarket Mirror Install 🔥🔥WARNING 🔥🔥

Рет қаралды 35,741

2 жыл бұрын

Here's the new mirror install on my 2021 Yamaha MT-09!
..........................................................
LIKE & SUBSCRIBE for more videos like this!
I think this does the bike so much more justice than the stock mirrors from Yamaha. They also weigh a lot less....not like that matters, but random fact none the less.
Tell me in the comments let me know what else you would like to see......
// Follow Me Here:
/ mt0h9
Anyhow, in the comments let me know what else you want to see......
Find the mirrors:
Trademe NZ.. www.trademe.co.nz/3329803557
And block off screws.. www.trademe.co.nz/3305238386
Rest of the world.. amzn.to/3nEREyA
Thanks for watching!
=====
ABOUT ME
=====
I ride bikes and sometimes do cool stuff!

Пікірлер: 70

@brandtjr 2 жыл бұрын

Thanks for the video. I just bought the exact same bike and can’t wait to start making it my own!

@bosk1n 2 жыл бұрын

Great vid, thanks! Will definitely upgrade the stock mirrors on my mt09 too!

@JayWetzelMusic 2 жыл бұрын

Got the same bike. Love the vids keep them coming.

@kurastyles 2 жыл бұрын

Thank you. Great video. I've just put XSR bars (black) on mine. They are a little wider than the standard mt09 ones and come black. Which would look awesome on your bike. Your bike is very nice.

@drsbrickwork Жыл бұрын

Nice... gotta get my self some of these 🤙

@pauls3696 7 ай бұрын

Great video just bought myself an MT09 cant wait to get it delivered lol thanks for the advice about un doing the mirrows learnt something there that could end up breaking mine when i do swap them over so thanks 🙏

@thethrottletube 3 ай бұрын

Welcome to the team. Glad it helped :D

@aoplinger622 2 жыл бұрын

A cheap version of the crg arrow, I love it! Definitely gonna go with these instead of dropping $300 on the crg mirrors

@burkeyatm 2 жыл бұрын

I have the exact same mirrors and installed them on the ends of the bar-end weights. Gives you more room for your hand, particularly when you need to shift your hand to the screwdriver grip when cornering hard.

@stevenbailey1863 26 күн бұрын

Where did you get your mirrors from

@feloniousmonk5261 2 жыл бұрын

Nice one. Subbed for more MT09 stuff 😃

@thethrottletube 2 жыл бұрын

Thank you very much. Lots more on the way!!!!! 😬

@1life2pono 2 жыл бұрын

Are you getting any increased vibration in the grips from not using weighted bar ends?

@Bassnmoto76 2 жыл бұрын

Hey love the mirrors and I have the exact same bike also just ordered M4 exhaust. What Brand mirrors are they?

@so5ma61 2 жыл бұрын

Does it vibrate? I heard cheap mirrors vibrate and difficult to see in high speed?

@MT10dan88 2 жыл бұрын

keep doing the videos mate. So much better that your a Geezer and not a Annoying talking American. Had my 2021 09 now for 4 months. fantastic machine. I've got the exact same mirrors. I'm yet to unbox. had them a year. brought them when I had the 07 🤣.. Looking forward to more of your content nice 👍🏻. might install mine now...just relised your from NZ 🤣🤣 Thought u was from London until I watch your other video..🤦🏻🤦🏻

@thethrottletube 2 жыл бұрын

Thanks man. I shall be doing way more. Been raining here for about a week and I've been a busy bean. And yeah, I am from London, I just live in NZ now. I'll throw in some proper slang in a few videos and see who pics up on it 😉. And yes to the 09, stoked for you man. Let me know if you do anything cool with it. And 100 percent get those mirrors on there ASAP!!!!!! Ride safe my dude

@mikehenry5201 Жыл бұрын

❤️🤜

@SocalMoMoto 2 жыл бұрын

Nice video! I have to say though, my OCD really wanted to break down those boxes & put them in the trash.. 🤭 I'm looking into removing my bug antenna mirrors also. Just haven't decided on anything yet. 🤔

@thethrottletube 2 жыл бұрын

Don't worry, I can tell you after this they made it into the recycling trash and have been given a good home ;)! And yes, once you get something like these on there, it opens up you're view and makes you feel even more free when riding. Let me know if and what you decide on getting if you do change them 😎

@SocalMoMoto 2 жыл бұрын

@@thethrottletube LOL, right on. ♻️ I just need to find a pair that can be modified with my current barends. I'm not great at modifying.

@benpryor578 2 жыл бұрын

Hey mate. Great video. I’m in Auckland and picked up my SP a couple of weeks back. Any chance of you putting a trademe link somewhere? Cheers

@thethrottletube 2 жыл бұрын

Welcome to the big league 😉. Congratulations, just in time for summer. Let's arrange a ride, would be cool to see them both together. And sure thing, just updated the description for you with mirrors and screws for NZ. Have a great night 😎!

@teamskurk8394 2 жыл бұрын

yo bro. can you send me the link to the mirros?

@tiagoteixeira1867 2 жыл бұрын

Hi dear friend!! I ordered some mirror like yours, with white glass, but the glass isn't equal like the original, they are made like regular glass and not glass for bike? The cars appear so much closer right now. Do you have the same problem? Tanks you

@thethrottletube 2 жыл бұрын

Mine seem to be pretty good. They work well. If you look at the video around 6.20 you can see the reflection of my hand in the mirror and it doesn't make my hand look too magnified. I'll get an angle when I am riding for you to see :)

@JamesWilson-lg7bx 2 жыл бұрын

I have the same bike but the SP I’m curious what exhaust did you order I’m looking for one myself

@thethrottletube 2 жыл бұрын

Nice!!!! It's a fun bike that's for sure. Here it is, this one is not entirely road legal ;) but they do have a few that are. Have a look. I think they are the best looking on the market so far for sure...... what do you think? www.mivv.com/exhaust/y-068-sc5b-yamaha-mt-09-fz-09-2021/

@Sagivos355 2 жыл бұрын

Hey, do you have a link for the short licence plate holder that youve got maybe?

@thethrottletube 3 ай бұрын

Bit late.... But it was an Australian brand. Can't remember now but you've prob found one by now ;)

@glennvandenberg3912 2 жыл бұрын

They look really nice. Do you find the extra width a problem while working through traffic at the lights?

@thethrottletube 2 жыл бұрын

Thank man. No not at all. If you look at it, I took off the original bar end bits, I think it looks better without them on with these mirrors. Anyway, the new mirrors are not far off the width of the standard handlebar set up, so no, no issues at all. And the way these ones go up then out, they are pretty good for gauging width in traffic! :D

@n40798 2 жыл бұрын

can they be turned 180 degrees to point towards the inside?

@thethrottletube 2 жыл бұрын

Yeah, they spin either way and mount up or down. Up to you which we you want them to be. Also they are holding up really good, no issues at all!

@GuilhermeBernart 6 ай бұрын

When you installed the one on the right, didn't your gas get blocked?

@thethrottletube 3 ай бұрын

You mean throttle? Nope, everything is and has been fine since!

@micky1934 Ай бұрын

Nice vid man! Might get these for my 21 MT125. Glad to see you’ve said they’re still going strong. How long would they take to deliver to London? Ride safe

@thethrottletube Ай бұрын

Yeah I still have them, no issues at all. And you'd find them on Amazon in seconds. Probably same day delivery. That's the one thing I liss about London. NZ delivery can take weeks lol

@micky1934 Ай бұрын

@@thethrottletube I’ve been down a rabbit hole all day ffs. Unscrewed my bar ends earlier and realised I’m gonna need adapters too. I’ll pull the trigger on them soon! You’re not missing much here mate, it’s coming home tho 😂

@thethrottletube Ай бұрын

@micky1934 ha yeah I've been keeping on top of the games here. I'll be back for December to spend with the fam. Bring on the freezing cold 😪

@guillee3709 2 жыл бұрын

hey mate, i got the same ones but on the bars they move around a lot

@thethrottletube 2 жыл бұрын

That's not cool. Mine are sitting solid, no issues at all. I'm assuming you put them on the exact same way I did?

@guillee3709 2 жыл бұрын

@@thethrottletube yeah might put some electrical tape on and try again

@FIared Жыл бұрын

@@guillee3709 Fixed it? I have the same problem with these

@davidd6849 2 жыл бұрын

Hi great video 🤙 easy to follow Where did you get the extensions from for the universal mirrors is it included in the box When you say spacer ? is it a washer between your grip and the extension ? The black colour of your Mt is sick I subscribed to your videos keep them coming Cheers from Canada 🇨🇦

@thethrottletube 2 жыл бұрын

Hey David, thanks alot my man, I appriciate that ALOT! So the washers in the video come with the mirrors. BUT there are separate spacers you can buy to get those small original bar end fittings back on. I just left them off because those on the end of ADDING the mirrors made the already wide handlebars look silly to me as they made then ULTRA wide. I think it looks better with them off as I have them and stopping at the mirror. Looks way cooler and aggressive. There's a couple others that did a video installing mirrors with the spacers. Have a look, two different end results. Thanks for the sub again, legend!!!!!!

@Mark........ 2 жыл бұрын

Will you flash the ecu ?

@thethrottletube 2 жыл бұрын

Yessirrrr, once I get the exhaust on this I'll be sure to have all the kinks ironed out to match!

@jdonfireofficialmusic5037 2 ай бұрын

Where can I get the specers?

@thethrottletube 2 ай бұрын

I'm not to sure my friend. I just used what came in the box. 🤘

@floridapatriot9776 Жыл бұрын

Was there any interference with the clutch operation?

@thethrottletube 3 ай бұрын

Bit late, but nope ! :D

@t.m9341 Жыл бұрын

what do you think of rizoma is it too much for what its worth?

@thethrottletube 3 ай бұрын

These cheapies have help up mint. Next time I would go branded just because. But these ones have held up perfect

@t.m9341 3 ай бұрын

@@thethrottletube I want to find a quiet helmet do you know which one wins ? I got a quantum x cus it makes me look like a cat but I Wana know if rf1400 or neotech 3 wins

@thethrottletube 3 ай бұрын

@t.m9341 from anything I know, you cannot go wrong with the rf1400. I'm getting a Shoei next myself I think actually!!

@t.m9341 3 ай бұрын

@@thethrottletube idk which one to get cus I want stereo in it. They don't feel good at all when I tried to install cadro in my quantum . I don't think arai likes stuff in it. I don't want the pads and wires to hit my ears it makes me crazy

@JihadHorse 5 ай бұрын

Hi do u still have these on the bike

@thethrottletube 3 ай бұрын

Hey, yep! They are still holding up mint. Uploads coming ASAP

@wej4378 Жыл бұрын

Link to purchase?

@thethrottletube 29 күн бұрын

I hope you found some. Sorry for the late response. Ride safe

@paradao7 2 жыл бұрын

Nice Video, nice work. After driving what do you think about the mirrors? Do they vibrate on yours? Because I got some bar end mirrors too on my MT-09 ' 21 (not the same like you) but mine are vibrating a lot when I'm driving. I put now some rubber spacers let's see in summer. And if I can ask, which exhaust are you waiting for? Cheers from switzerland

@thethrottletube 2 жыл бұрын

Hey Patrick, I have little go no vibration at all with these mirrors. They are holding up very well, no issues at all. Good cheap alternative! And an exhaust from Mivv. 😁

@paradao7 2 жыл бұрын

@@thethrottletube ok then I need to try some mirrors like your‘s. Thanks for the help. Nice you need to tell me how you like the exhaust then. 😉

@lold6130 Жыл бұрын

$15 - Chinese c**p no doubt. You buy cheap you buy twice.

@thethrottletube 3 ай бұрын

3 Years later, they are going strong!

@ahmadmahairi8115 2 жыл бұрын

These are cheap imitations of the CRG Arrow ones... much much more expensive but worth every penny, they withstood scratches, drops, and fiddling around for more times than I can count... the cheap chinese ones will just suddenly break if you go high speed...

@thethrottletube 29 күн бұрын

Very true. 3 years later and they are still holding up well

@Jdanielvoliveira 2 жыл бұрын

Hey everyone! Please don't buy these mirrors! they seem to have good quality but over time the metal loses strength and eventually breaks. Better to buy an official brand.

@thethrottletube 29 күн бұрын

Agreed in some ways for most things. These mirrors are still on my bike absolutely fine 3 years later 😏