Finally, someone who takes the time to explain blueprints and shows the building process - rather than paywalling them, or just saying "here's the blueprint" and then no explanation.

I'm going to try all that you just showed. I wrote it down to make sure i have this information handy and will have the KZfaq set tovthis as well. I'm 68 and my mind is getting a little forgetful so, I'm playing to get it going. When i was younger i would have been able to remember better and understood better, thank you do much for the information, i just get lost with what most of the others saying about "how to". Thank you again.

I am a veteran of Sarisfactory but being on winter break from college I dove in again. This video helped be dive back in oil at zipline pace! Thank you so much.

I appreciate you going through all the details of this. It makes a lot more sense. Thanks for the upload

Wow. I learned something today. Didn't know you can burn Petroleum Coke. You probably get more energy out of Diluted fuel, but until Blenders that's a bit of a tedious process so burning Coke is a much quicker and easier setup that you can just wholesale delete when you get to Phase 4 instead of having to reconfigure a bunch of pipes and delete your Can factory.

One of the only satisfactory tutorials that is worthy to watch

This was the perfect video for my troubles with oil thank god you made this video.

Great video explaining the whole process

Not sure if you are aware or not, but you can actually just snap splitters/mergers right onto the conveyor lifts (it can be a little finicky to get the placement sometimes), which avoids having to build the 4-stack of splitters first. Some people consider this clipping, but I think it actually makes the splitter/merger and lift look like a single unit. Keep up the good work - I really enjoy your videos!

I dont know if y'all know but you can delete blueprints with one click. And if you put a bp on floor and delete someting you dont need do go to hotbar again. You can just copy a complete bp that as already put on ground. Just changing the delete mode for blueprint and click in midle mouse boton

A tip for cable management. Run a steel beem just above the cable hookup points and you can place the wall mounted power connector over each hookup point, then you just daisy chain em up and the cable should be hidden under the steel beem.

Glad to know that I'm not the only one who named their train choo choo in full caps

Ah Blue Crater, I recently finished my big fuel generator project there, only working on decorating it now. All the oil is converted into Heavy Oil and then all of that is pumped through Blenders to make diluted fuel and almost 1800/min Compacted Coal used to turn as much into Turbo Fuel as possible. It's a massive 6 floor building, very top heavy because of the sheer number of Fuel Generators. I don't even know how much power it outputs exactly, but I'm pretty close to finishing and I think it will be enough for that. I have the various oil facilities use the Residue for Generators too, so those all combined should be enough. I really don't wanna make Nuclear. I checked on Satisfactory Calculator and I actually have exactly 1000 Fuel Generators. Amazing. 827 of these is in the big plant in Blue Crater. Well every block has 1 that's not running on full clock speed so let's say it's effectively 980 on the whole and about 800 in the big plant, that means it's a cool 120 000 MWs of power. Could be more but you'd have to use up most of the sulfur in the game.

The subtle Billy Madison reference was nice :)

This is a great video. I watched a few on this subject. I settled in to yours and have been following along. Im almost finished and added my own changes along the way. I turned half of it on after a quicksave and it all works. When im done, I was wondering if you have a video where you improved this power plant plastic rubber factory?

I don't even have the game, but I enjoy watching your videos -- thank you!

You can delete blueprints with one click FYI. Press R to change the delete tool.

Good start, work in some alternates one done! Recycled Rubber/Plastic and Diluted Fuel are your friends.

For some reason it could not sustain the delivery of coal but adding a few power storage to not waste energy solved it

very good video

Those things in the lake that you said you cannot destroy ... have you tried chainsawing them?

Great video, thank you for making it! I'm wondering if you didn't forget a little something though : in the intro you mention that this setup will produce15 rubber. Since a refinery at 100% produces 20 plastic, that must mean the refinery producing rubber should be underclocked at 75% yet you never mention this. Is my math wrong ?

Thanks!

am i dumb? 11 coal generators needs 275 Petroleum Coke. However, you are only generating 265. Will the power constantly fluctuate?

Why don't you overclock everything with the power shards and just have less machinery?

Great vid btw, im only able to keep 8 coal generators running instead of 12. Im not sure if ive done something wrong or im meant to let the potroleum fill up all the generators before turning them on. Thanks anyways!

If i have a Fuel Generator is better to use it then instead of a coal Generator then ?

Gotta put awesome sink for the overflow too 🙃

What if you have 600oil/m?

Whwre the blueprint link

⚒

Can you do a one click nobelisk factory

It feels like your generators are going tostarve without ay balancing for your conveyors?

I like it

I've watched so many vids on this game and everyone is flying in them. Is that a Mod?

did you upload this to you folder and what is the name?

this is nice work.. But for starters it is really bad... Why not make it normal?

time to quit this game.