The BEST UTV Belt Break-in process for any Polaris and CanAm SXS!! (Pro-Tip included)

Рет қаралды 81,393

Күн бұрын

In this Video, Travis with Trail Kings is going to explain what is the BEST UTV Belt Break-in process for any Polaris, CanAm, Yamaha, & Kawasaki SXS!! (Pro-Tip) Stick around to the end and he will give a Pro-Tip on determining if its time to change your belt. As always, please show your support by hitting the subscribe button.
Some product links are affiliate links which means if you buy something we'll receive a small commission.
📒 Show Notes 📒
1️⃣ BEST belt for any SXS not listed below
www.trailkings.com/collection...
2️⃣ BEST belt for Polaris Rzr and Turbo S
www.trailkings.com/collection...
3️⃣ BEST belt for Maverick X3
www.trailkings.com/collection...
4️⃣ BEST belt for a Polaris General
www.trailkings.com/collection...
5️⃣ BEST belt for a Kawasaki KRX 1000
www.trailkings.com/collection...
6️⃣ BEST Belt for Defender
www.trailkings.com/collection...
7️⃣ BEST belt for ACE 150
www.trailkings.com/collection...
8️⃣ BEST belt for Scrambler
www.trailkings.com/collection...
9️⃣ Trail Kings Hats
www.trailkings.com/collection...
🔟 Contact Us, We are here to help
www.trailkings.com/pages/cont...
Connect with Trail Kings on Social Media:
www.trailkings.com
/ trailkings
/ trailkings__
/ trailkings
/ trailkings
g.page/trailkings
About:
Travis with Trail King’s breaks down what is the BEST UTV Belt Break-in process for any Polaris & CanAm SXS!! (Pro-Tip) Stick around to the end and he will give a Pro-Tip on determining if its time to change your belt. As always, please show your support by hitting the subscribe button.
#trailkings #BreakInProcess #BeltBreakIn #BestBeltBreakInProcess #Polairs #CanAm
Disclaimer: Please see the link for our disclaimer policy for all of our videos on the Trail Kings KZfaq channels. www.trailkings.com/pages/yout...

Пікірлер: 32

@zachstroud9042 Жыл бұрын

Very nice and this will help alot of people.👍

@trailkings Жыл бұрын

Thank you.

@manuelguerrero3089 7 ай бұрын

Thank you

@bobtawilger359 3 жыл бұрын

Thanks for the info!

@trailkings 3 жыл бұрын

You’re welcome

@maineiacmike4110 2 жыл бұрын

Thank you sir.

@trailkings 2 жыл бұрын

👍🏼

@doc559 3 жыл бұрын

🏆🏆🏆👍🙏 Thank you for sharing

@trailkings 3 жыл бұрын

You’re welcome.

@erniepad5812 3 ай бұрын

Did you have it in all wheel drive during the break in period?

@davidn8045 3 жыл бұрын

My 2021 CanAm X3 Max DS Turbo has a stutter when taking off with light throttle. I have 32" tires, up from 28"OEM. Replaced the clutch spring with the black spring, weights and fingers. Now on my 3rd belt, none have broken, but can't seem to get rid of the stutter. In process of breaking in new belt. Any advice?

@trailkings 3 жыл бұрын

Did you change out weights when you changed the spring in the clutches? The bigger tires add more weight and if you carry a lot of supplies like we do, that could be contributing to your issue. Stuttering at take off usually means a belt issue but if it’s doing it on a new belt, then you prolly have a grip issue. Meaning the clutches cant grip the belt enough because of the increased weight. I’ve learned clutching isn’t a 1 size fits all. It’s definitely something you have to dial in depending on what type of riding you do.

@ericbryant7042 2 жыл бұрын

I have a 2016 800 odes and put a new belt on add it slapping the caseing,casting, you tell me what causes that please

@trailkings 2 жыл бұрын

Have the clutches been serviced? I would start with inspecting the clutches. Check for pitting and wear grooves. The clutch sheeves will dip down with grooves if the clutches are wore down. Also does it try to take off when it’s in gear and your not pressing on the throttle?

@beatenwiener69 2 жыл бұрын

I have a 2015 can am outlander 500 V-Twin and i just replaced the belt and did a break in process but it has been spitting out pieces of belt out the snorkel but seems to be from the old belt

@trailkings 2 жыл бұрын

If your previous belt shredded, there might be pieces of the old belt behind the clutches. I would suggest opening up the clutch box again and feel around to make sure there is no debris behind the clutches. Just make sure your machine is offer when checking behind the clutches. The old belt might of all came out but I would definitely check it out before it damages your clutch’s and new belt. Hope this helps.

@michaeltrindade7225 Жыл бұрын

Is it normal to smell burning rubber when I stop riding? I have under 2 miles on the new belt.

@trailkings Жыл бұрын

I smelt some weird smells on a new machine when first breaking it in. Once broke in, you shouldn’t have any of those smells.

@michaeltrindade7225 Жыл бұрын

@Trail Kings ya. I put some more miles on it and the smell is gone.

@trailkings Жыл бұрын

Good deal.

@TheFister13fox 2 жыл бұрын

So after the second 5 mile, low gear, and speed fluctuations ill be able to go "full" throttle?

@trailkings 2 жыл бұрын

Yes but on our personal machines I do a 3rd cycle in high fluctuating from 25 to 45 mph in high for another 5 miles. After letting it rest for another 30 mins, then it’s good to go. I’m overkill though, 3rd cycle is not required but I’m just overly cautious.

@TheFister13fox 2 жыл бұрын

@@trailkings thanks for the quick response sir. And I will also do the 3rd cycle as you instructed. Thanks again

@trailkings 2 жыл бұрын

You’re welcome. We appreciate you watching the video.

@calebscott8472 Жыл бұрын

Why does my belt keep rotating

@trailkings Жыл бұрын

can you give more details, please? Rotating in park? slipping? or jerking?

@SzymczykProductions Жыл бұрын

I did not subscribe because you begged like every other KZfaqr.

@trailkings Жыл бұрын

Sorry you feel that way. Our intent in us saying "show your support by hitting the subscribe button" was not to come off as begging but to explain to viewers how they can show support if what we provide them through our educational videos had value to them. Either way, we do appreciate you watching the video.

@buddygotmotion Жыл бұрын

why comment then weird ass nigga

@badfastbusa Жыл бұрын

What a prick thing to post, go sit in the corner.

@mcm542 Жыл бұрын

@szymczykproductions - jerk; @trailkings nice professional response

@Hammerback0 7 ай бұрын

U cant be serious? Saying show support if this helped you and subscribe isnt begging. What a asshat. Good on u sir for being nice rather than tellin him to go suckstart a Mossberg. 😂 subbed