The Best Value FID Weight Bench? REP AB-3000 2.0 Review!

Рет қаралды 152,533

Күн бұрын

Coop reviews REP's update to the AB-3000!
✅ REP AB-3000 2.0: www.garagegymreviews.com/go/r...
✅ REP AB-3100: www.garagegymreviews.com/go/r...
✅ REP AB-4100: www.garagegymreviews.com/go/r...
✅ REP AB-5200: www.garagegymreviews.com/go/r...
🔔 Subscribe To Our KZfaq channel - garagegymreviews.co/KZfaqSu...
0:00 - REP AB-3000 2.0 Review!
1:14 - Overview
1:49 - REP's "Third Wave" of Products
2:18 - Improvements of the AB-3000 2.0 over the original
4:42 - Design of the AB-3000 2.0 & Component Quality
4:48 - Vinyl & Foam Quality
11:21 - Aesthetics and Pad Gap
13:03 - The AB-3000 Leg Roller
16:43 - Bench Stability
17:28 - Coop's AB-3000 2.0 "Pros", Pricing, and Alternative Options
19:39 - Coop's AB-3000 2.0 "Cons"
21:58 - Final Thoughts
All of Our Recommendations ↓↓↓↓
➡ Best Barbells: www.garagegymreviews.com/best...
➡ Best Squat Racks: www.garagegymreviews.com/best...
➡ Best Benches: www.garagegymreviews.com/best...
➡ Best Bumper Plates: www.garagegymreviews.com/best...
➡ Best Barbell Collars: www.garagegymreviews.com/best...
➡ Best Weight Belts: www.garagegymreviews.com/best...
🏃🏻♂️ FOLLOW US:
►INSTAGRAM:
►FACEBOOK: garagegymreviews.co/Facebook
►TWITTER: garagegymreviews.co/Twitter
🔥 JOIN OUR COMMUNITY:
►HOME GYM COMMUNITY: garagegymreviews.co/Community
👨🏻💻 EVERY REVIEW:
►GGR: garagegymreviews.com
We maintain an affiliate relationship with some of the products reviewed, which means we get a percentage of a sale if you click over from our site (at no cost to our readers). See our full disclosures here: www.garagegymreviews.com/disc...
▬
Copyright © 2022 Garage Gym Reviews

Пікірлер: 243

@_Zane__ Жыл бұрын

"When I'm lifting that as a warm up weight..." never change coop 🤣

@kyfriis Жыл бұрын

I almost went with the 4100 after your review but I really wanted decline for sit-ups and benching but I ended up going with this one and I love it. The decline is perfect for me and I didn’t like the leg roller pin at first either but it works just fine once you get use to it. For the money I think this is by far the best bench available

@Jamezee312 9 ай бұрын

do the leg pads get in the way for flat benching?

@hrshy491777 Жыл бұрын

“When you’re benching 7, 8 hundred pounds..” I have always had that issue with the pad too during my warmup. Thanks Coop

@andresmaldonado7356 Жыл бұрын

Lmao 🤣

@ddanj0331 Жыл бұрын

Bought this exact bench within the week of their release. Didn’t even know it was a new release. Couple months later it’s been an absolute beast of an bench for the home gym

@xtert2473 Жыл бұрын

does the thing to hold your feet in while doing decline bench get in the way when your doing normal flat or shoulder press and can you take it off or no?

@joecowan3719 Жыл бұрын

I'm extremely happy with my REP AB5200 I got on sale, built like a tank. Just here to support Coop, those old clips take me back!

@Msinsomnia911 Жыл бұрын

Just ordered mine. Happy to have found you guys. I really appreciate the pros and cons being reviewed. And anything that allows me to not buy cheap Amazon knock-offs is a plus. New fan!

@keeay Жыл бұрын

Appreciate all the time you spend in depth with all of these products!

@pathymain1313 Жыл бұрын

I recently purchased this and couldn't be happier. Stellar construction, doesn't wobble at all. For the price, it's incredible.

@mc-fine Жыл бұрын

I just setup mine last night. Got it 4 days ago and just watched your video on their office. Really like it so far

@IYUB30 Жыл бұрын

Coop, I truly respect that you made friends at Rep and still give an honest review. Call me naive, but I trust your stuff. Thanks for all you do.

@jasonmitchell8883 3 ай бұрын

just purchased with ur link, thank u for the time u spent doing this review coop

@NoFate247 Жыл бұрын

The biggest stand out to me was how FIRM the backpad was, really impressive for the thickness and certainly an improvement in the design IMO

@redeye259 Жыл бұрын

I was looking for this review from you before I pulled the trigger and bought this bench a couple weeks ago. Glad I took the chance even though there weren’t many reviews out. I’ve since set it up and started using it and the bench is high quality and an awesome value for the price. I got the red to match my Omni rack and it’s a beautiful set up in my home gym

@JP21507 Жыл бұрын

What a stud, 4k videos, time stamps, and a mustache, keep up the good work.

@Chronic_Christopher Жыл бұрын

I bought the version one years ago after your video. I want you upgrade to the AB4000, but still can't justify spending money on something that I already have. It's still a great bench, and does everything I needed to accept, stand up and be regulation height.

@anubis24354 Жыл бұрын

I picked this up around Black Friday, I’m really enjoying it and really enjoy the grip of the vinyl. The pins in the seat are actually pretty nice when you get used to them, they give a weird amount of variety to how you set up the roller.

@charles281 Жыл бұрын

how much did you pay on black friday?

@anubis24354 Жыл бұрын

@@charles281 I know this is old but I waited until they did the whole 10% off site wide thing because I was also getting a bunch of other stuff.

@charles281 Жыл бұрын

@@anubis24354 thanks for the info, now I have a reference point for a decent price 💪😎👌

@mikeinca3762 Жыл бұрын

Great review coop! I always go to your vids on anything and everything in the gym industry!

@lateralexrex 3 ай бұрын

So glad for this review, I had missed this didn't have a stand-up feature.

@mc-fine Жыл бұрын

Fair and in-depth review. I wanted decline which is why I chose it over their other options. I got zero issues with the pins. They stay in the bench no reason to leave them out. Overall with build quality, decline option and price this is fantastic value. I got the matte black version. The vinyl does look like smudges and marks show so won't look as clean after a few uses but long as it doesn't rip easy I'm good

@REPfitness Жыл бұрын

Glad you're loving the bench and good point on the pins. Cleaning tip: rag and spray bottle. Paper towels shred since it's a firm and grippy pad.

@itsatoolthing6323 Жыл бұрын

Thanks for your honest opinions and reviews on home gym equipment. Just picked up the mx select dumbbells set and AB-3000 2.0 per your recommendation. I used your links hope that $ help support your channel❗ I appreciate your efforts 👌 💪

@blvckrxbbit 9 ай бұрын

Great review, as always. I will mention, while I don't put my bench away often, when I do have guests and need to tuck the bench in a closet / garage, I'll pin the leg roller in a way that is parallel to the ground once flipped with the roller side up. This is very secure due to the weight you mentioned (@ 21:30) at the seat / leg roller area. As for the backrest, I just strap it down using a bungee. Just my trick for anyone looking to store it vertically. Cheers.

@b2284 4 ай бұрын

That's my main issue going back and forth with getting this bench, I feel def like there is a way I could set it up to store away when I'm trying to move around and do other movements in my small area l. Thanks for the idea! Wish someone made something to help store this one but I haven't found anything yet searching forums, just always am seeing reviews about it, not much else. Maybe one day

@Eric-ye8ip Жыл бұрын

Got the same bench. Very happy with it. I do agree with you on the gap between the pads. If your not perfectly situated when you're bench pressing your tailbone falls in the gap. Need to slide your body further up on the pad. Outside that im happy with it. Firm pad, grips well. Very solid.

@the_handro 10 ай бұрын

Just got mine and it's an absolute solid piece of equipment. Easy to put together and very steady.

@scottvasnik Жыл бұрын

Having the number for the degrees engraved on is a cool addition. It would be great to stop bringing my protractor into my home gym! Haha great review!

@MacMayhemMiller Жыл бұрын

I got this bench as my 1st in home bench and I've really been enjoying it I was able to save even more as I live near their wear house in PA and could just go pick it up - it's high quality - me being in the metal fabrication business the welds are good quality which was nice to see - as a beginner in weight lifting the things you mentioned about the pad gap I didn't even notice to be honest- I also don't know what the 2 extra pin holes are for I just assumed pin storage? But who knows - great review!

@satrianirocks Жыл бұрын

Of course Im subscribed! You guys are the best!

@gearardlefore 3 ай бұрын

Thank you so much for your reviews I fought the urge to buy a bench on Amazon and just purchased this. I made the decision after watching this review and then seeing people selling their used benches that look like ass and worn down after two years. Buy once cry once!!

@PrinceCobra21 11 ай бұрын

i love you honesty my friend 💪 keep it up

@edwardleask Жыл бұрын

I appreciate the review.

@pavXX Жыл бұрын

Thanks Coop. Looks like a great bench, but yeah that gap is pretty wide.

@irishman485 Жыл бұрын

That’s the exact bench I got and I love it

@MaxIQ77 2 күн бұрын

Decline is a must!

@josegamboa994 Жыл бұрын

Bought this bench in the red. Not crazy about the feel of the foot/leg pads when extended, but it is a good solid bench. Because of the build quality I won’t need to buy another bench, but I am eyeing that AB-5200 💪🏼 I also just bought the rogue Ohio power bar in full stainless steel. It arrives Tuesday and I can’t wait to start using it.

@joemarshall6408 Жыл бұрын

Good day, I just started to recently watch your videos and they are fantastic!!! Love all the reviews and everything. Just had a quick question, with all the gym equipment you get for reviews do you ever do giveaways for subscribers? Thanks and keep killing it

@joecowan3719 Жыл бұрын

Yup, around the holidays. They also give back to schools and even the FDNY. Great channel, jealous you have so much good contact to catch up on.

@amunra4256 Жыл бұрын

I absolutely agree that if you're looking for a FID around this price range, this is the one. Incredible bench for the price

@rjm8373 Жыл бұрын

One thing that would help Coop with the leg roller is use the pin as a limiter. Don't insert it in line with the leg roller hole, just set it where you want the leg roller to stop. Then when you're not using it it swings out of the way, and when you use it or pick up the bench it goes to a good angle.

@REPfitness Жыл бұрын

This is a great tip. Thank you!

@actualnatural Жыл бұрын

Was thinking if you want to remove the roller pad completely you could use those back pin holes to secure the swing arm under the bench.

@andresmaldonado7356 Жыл бұрын

That was my exact thought

@TH-lo8mq 8 ай бұрын

Great idea. Thanks for this.

@kamer7687 5 ай бұрын

Just pulled the trigger on this guy. Decline is important to me since my trainer always puts it in my second push day of the week. No brainer at the price.

@Brockthedog315 8 ай бұрын

I just received mine today. This is an incredible bench. The details are well thought out with great craftsmanship. I had to install the seat pad bench so the narrower end is in the front or I couldn’t comfortably use the rollers. The texture of the vinyl is very nice. Gotta think this will stay pretty pristine. The pad gap doesn’t affect me as I’m 5’-5”. It could be reduced by about 1/2” though and it would still go up and down perfectly. I really like the 85 degree at the top. Just right. A little more decline would be nice but at least it has decline. I like that. It’s heavy for sure but I don’t think it’s too heavy to move around easily. The tolerances on the bench pads is crazy. You have to keep the bolts loose until you get them all in place before tightening. Only two dings for me. I think the top is just a little too stiff. Especially for home use. Maybe in a gym with tons of use this would be more important for long term durability. And if there were some steel bits on top of the upper bench pad at at the wheels it could be stored vertically without scuffing up the pad or marking up your floor. I got the white version. It is gorgeous. Great job #REPfitness

@lwmstern 8 ай бұрын

Is it normal to have some amount of play on the bench when doing decline sit ups ? I feel like because of the pop pin system there is slight play with the seat pad when doing sit-ups

@beaugiles1290 8 ай бұрын

The second pin is a spare and the holes are to store the pins.

@davecox6431 6 ай бұрын

I've been thinking about the standup feature, I'd like to see Rep give us a fitting to add a standup feature, something that attached to the two top bolt holes of the back pad. If not Rep, someone should

@josegamboa994 Жыл бұрын

Just got mine delivered today in red. Dang, this thing is a tank. A little lower to the ground than I thought it would be, but it should work great since the seat pad is adjustable.

@josh4154 Жыл бұрын

I think i just found my new bench. I like the fact that the back pad is shorter. I like to do incline tricep extensions and the pad on taller benches gets in the way. As far as the pins go, just don't pull them out and set them somewhere. They should always be in the holes except to adjust. I love the channel and your reviews

@chrisburke3212 Жыл бұрын

At your timestamp of 8:14 talking about the wiggle that some of the older versions of the AB3000 had, I currently have that with their bench. It's not the 2.0 version of the bench but the version before that. When I emailed them a video of it, I was told it was an acceptable amount of wiggle within factory specs and if I wanted to send out a different video for them to look at, that they would. To me, it wiggles way more than I'd like but it's the dream bench i've wanted.

@BB-zd2sf 5 ай бұрын

Yeah I've heard so many nice things about this bench and... I just don't like it at all. That wiggle is way too much for me.

@Polak966 Жыл бұрын

Hey Coop! Any chance you guys could start reviewing other types of equipment ? Things like home machines, like titan legpress/hacksquat combo, powertec lever gym, ect?

@authentichealthcoach4142 Жыл бұрын

I have the version 2 of the FID and my complaints of that one is there is no rubber on the foot plates. So it is slippery when i place that in my rack as my rack has a platform on it. So I have to plant DBS behind it so it doesn’t shift. I think i bought the bench for $180. Really nice bench otherwise. I use the decline for leg raises and decline sit-up options. Vinyl is awesome. A little shaky and big butt pad is awkward doing incline db bench getting on there. I use a dedicated flat bench for bench press. I love that they made an adjustable feature for the leg rollers. That’s smart. The old one i had to add a lever bolt to make it easier to adjust. The old bench has a contoured narrowing at the very top of the bench so for chest supported rows or spider curls it gives a bit more room. Compared to the rogue adjustable and Sorinex adjustable its a bit lighter.

@CountBeefy Жыл бұрын

I just made three benches, one flat, incline and decline out of some free wood I found. All I could afford.

@bigk2080 Жыл бұрын

I wish they made these benches with options for leg curls.

@josegamboa994 Жыл бұрын

`Actually, the leg feature is what sold me on this bench. I almost bought the version before it, but I'm glad I waited. My pet peeve was the leg piece, because it just flopped up and down. Homerun with this new design, along with all the other upgrades. I bought it a week ago in the red. Good video - her name will be Christine :)

@SaulFemm Жыл бұрын

Agree on the pins. Captive is basically always better

@IsNotPhotogenic Жыл бұрын

I had purchased their previous model then like a week later the 2.0 came out 😖 I ended up exchanging it and I’m much happier with the 2.0 just kind of a bummer I hadn’t heard of the 2.0 coming out otherwise I would have held off for its release. Lesson learned 😅

@AgentDoubleV_Gaming Жыл бұрын

I just realized yall flat bench differently than me and that's why I've never cared about the "gap" My butt is always on the seat...so when flat benching my arch skips over the gap and I literally never feel it no matter what bench I use.

@letsgobrandon416 Жыл бұрын

I don't even to need to watch, I ordered one the week they were available. It's the best value, and a damn fine bench.

@FineFellow. Жыл бұрын

Hey Coop. What's the watch you're wearing. Looks good! Great bench review too. I got myself one of these and am very pleased with its solid construction.

@elizabethzaffarese8818 3 ай бұрын

I just got this bench not only for decline movements and incline sit-ups but also to keep my feet secured along with the leg rollers while doing lat pull downs.

@gerriscorp Жыл бұрын

I would love your advice. I'm 6'3" and want an adjustable bench without a leg stabilizer and that can stand out of the way that's also high value. $300-$400. Love your channel. Yes, getting better and better!

@nailatiylluf Жыл бұрын

If you’re not already, join the Facebook group and ask there you’ll probably get some responses. I’m 5’9 so I can’t help, sorry.

@jeffbill Жыл бұрын

The Hansu Power calibrated plates are impressively good, the quality is definitely better than Rogue. Please consider reviewing them!

@takedown6470 Жыл бұрын

I picked up the AB 3000 1.0. For about 260. I like the chrome look and I didn't really care about the pin that the 2.0 has for the legs The gap is not a problem because I have the rep Flat bench already.

@Felix-lf9ng Жыл бұрын

I got this exact bench in red for Christmas and i was so pumped. Its so solid and the grip of the bench padding is the best part because it locks me in so well on bench. My only issue is its big and annoying to move around cuz my home gym is small. Its basically like wheeling a dolly with a giant grandfather clock on it. Otherwise it does everything i need and does it better than my old bench and i was hyped to see a review talking about how awesome it is cuz i train with it daily.

@briansimon1263 Жыл бұрын

also have this in red and agree its heavy to move around a small home gym

@Logan-zi4vx Жыл бұрын

I tend to sit in the bench gap when I’m pressing and that’s my guide to know that I’m in my right spot ha

@Laocoon283 Жыл бұрын

I could watch someone talk about grains of sand if they did it with this level of genuine passion and integrity for it. Love it. These type of channels are becoming more and more rare. Just a sea of vapid cash grabs out there now.

@bobbycorbinII Жыл бұрын

Nice review Coop! What kind of flooring is on your floor?

@adrianceja8224 Жыл бұрын

Drinking Game: Take a drink every time coop says he is going to talk about that in a moment

@GideonsSword777 Жыл бұрын

You guys make a great due

@LSDDREAM757 5 ай бұрын

Ima buy it sir u sold me on it 👍

@kickingworld 2 ай бұрын

I just ordered the Griffin FID bench. Hoping it’s as good if not better. Really like the look of both.

@joeroma3815 Ай бұрын

Hey coop, I just stumbled upon your site, and am now a subscriber. I like the way you took the time to really review the AB-3000. It looks like a great bench, but is there any bench you recommend or reviewed with a leg extension? If so let me know, thanks.

@Cody_Codi_Code 8 ай бұрын

Hey Coop!! Love your reviews and appreciate how you present your opinions. Do you think the bench gap is smaller when the seat is flipped around?

@TheSasquatchNation Жыл бұрын

I dig that Rogue Fitness International skateboard deck 🤟

@Z28L98 Жыл бұрын

My prime bench is also a latter system and to quote Greg Doucette, it has "ah ZER-OHH" side to side mov. Coop already knows this.

@bretts3046 Жыл бұрын

I wish REP would work out cheaper shipping options for us Canadian citizens. Sure, a $450 bench isn't bad, but then they tack on $220 shipping, and it quickly becomes a no-go.

@pob1845 Жыл бұрын

I feel you...but Im afraid they cant do much...customs fee are a pain and inevitable...also our taxes are insane...im in Quebec province...its even worst. I ordered a bench from Irwin Fitness...500$ for taxes and shipping...within Canada!

@REPfitness Жыл бұрын

We are working on reducing shipping costs and increasing the availability this year. Thanks for the feedback.

@beggsjoe Жыл бұрын

Look up gear for it.

@michealstone Жыл бұрын

For real, I have it in my cart but haven't pulled trigger yet. $392 but $142 for shipping and $50.96 in taxes makes it $584.96 🤬

@dogflavoredramen Жыл бұрын

Was waiting for this for so long, ended up just buying it before this came out ☠☠

@jaimegutierrez5520 Жыл бұрын

I love this channel. I bought everything to my home gym from this channel

@richvanaman8969 Жыл бұрын

I’ve had mine for about a month now. I’ve had no issue with the pad gap. You’ll get used to the pins as you will only use them when you want to use the bench in the decline position. The fact that it doesn’t have a dedicated handle like the previous version kinda sucks. Other than that I love this bench.

@Fuzzynitrous Жыл бұрын

Coops bench warm up is 800 pounds that’s crazy

@chrisconklin2981 Жыл бұрын

I have had my REP AB-3000 2.0 for several weeks. I choose this bench because of the price, quality, and the front leg rollers. My only complaint is while lowering the back bench. At lower settings it is hard to see and adjust the riser bar. I have pinched my hand several times. The REP website has video of a bench that has a lifting handle attached the lowering bar. So, I made my own by lashing a shortened broom handle to the bottom of the riser bar, about a third of the way up. The round handle just fits into the cradle spaces. Also, as the delivery box has a mountain of styrene foam, I am making wedge blocks to fill the space between the seats. Thanks for the presentation.

@NurseJackie2582 Жыл бұрын

I was actually wondering if I’d be able to wedge something into the gap if I got this bench. Did it end up working for you?

@chrisconklin2981 Жыл бұрын

@@NurseJackie2582 Thank you for the question. Yes, cutting-up a surplus piece of packing foam works great. Most of the foam comes in large built-up blocks, so you have to cut and thin your block. The foam cuts well. I use a bread knife, but a regular kitchen knife will do. Start big and work the block down to size. It is most important is to keep the top of the block wider than the top of the gap. This way the block will tighten tight as you push the block down. I cut the block tall and trim the bottom in increments until it is flush and tight at the top. Best of luck.

@NurseJackie2582 Жыл бұрын

@@chrisconklin2981 thank you!

@Pepesilvia267 4 ай бұрын

I tend to throw a 45lb bumper plate under the footer when doing decline if the decline isn’t steep enough. It’s solid enough if you use a full size plate and a rubberized plate so it doesn’t slip much

@iamswright1853 Жыл бұрын

Sit on the decline for low rows instead of the floor people. Complete game changer.

@codyhuffman9886 Жыл бұрын

That's actually a fantastic idea I'll be trying that for sure

@Schmittr Жыл бұрын

I currently have the FB-5000 and love it, but have no adjustable bench. Want the ability to do incline workand am considering picking this up and selling the FB-5000 (for both space reasons, as well as money), but can't decvide if I'll regret it. Thoughts?

@xboxfanatic5622 Жыл бұрын

When is the big review on the Torque F9 coming out? It is such a badass functional trainer.

@zack9912000 Жыл бұрын

Good FID bench for the price. It's hard to beat. If you go amazon cheap, you will regret it.

@GTWGamer Жыл бұрын

Hey Coop, have you come across any home gym friendly stair steppers/ stairmasters? My job requires a ton of hiking, so it's my preferred conditioning tool.

@billystevens2911 Жыл бұрын

Hey coop I think it’s time for a review on all your different watches

@monarchlifestyle6299 9 ай бұрын

If it had the store feature I would buy it now

@paulsonusps 7 ай бұрын

I’m considering this bench 👍🏼but just wanted to ask you and seeing all that equipment you have , you should have a 💪🏼 buffed look 💪🏼

@TxAgEsquire Жыл бұрын

Question, does flipping the orientation of the smaller pad reduce the pad gap?

@MainStreetWeb Жыл бұрын

Great review, almost nailed everything. I bought this as my first serious commitment to my garage gym. I really like this, but there are a few things. 1. "Reversible seat" should be changed to something like "semi-permanent reversible seat". I had to go 🙏 for forgiveness after putting the thing on. No way anyone will be reversing that regularly. 2. I'd like to see a small handle near the wheels. I move this thing a lot. It would be easier to make small side to side adjustments with a handle somewhere on that end. Lastly, I can't understand why companies don't make a gap pad. I saw one but you might as well roll up a towel. So easy to make a wedge pad. If they wanted more of my money they could give it a small frame with rubber coated supports that rest on the frame where the REP badge is.

@DBShrinks Жыл бұрын

Use the silver bar between the rollers as your handle. I move it a ton! Love this bench, I got the Blue one too 😎

@marcusadames6884 Жыл бұрын

@@DBShrinks he’s asking for a handle on the opposite side of the bench by the wheels to make small ‘side to side’ movements at that end.

@robbieboyrobbieboy2877 Жыл бұрын

The width of the backrest is very important. But great review

@gideonroberts1133 Жыл бұрын

Did you move the Ares from your garage into your wearhouse? Looks good there!

@oecus2786 Жыл бұрын

Hey coop what's you opinion on the Bowflex 5.1s if I can get it for $200. I want a bench that can easily stand up and not sure if I want to spend the $200 extra for the ab4100 since I'm on a budget. This seems like the only other bench that can be stood vertical.

@miketroj3728 Жыл бұрын

As a dude who's been stuck with a Bowflex bench for the past 7-8 years, I'm vicariously living through all of GGR's bench reviews.

@BM-si2ei Жыл бұрын

7-8 months I understand... Why 7-8 years!? At what point do you bite the bullet and upgrade?

@miketroj3728 Жыл бұрын

@@BM-si2ei lol it's honestly by choice for the most part. I have two cats. They pretty much destroyed my bench. Guaranteed if I got a new one then it would have claws dug into it the first time I turn around.

@DampRaccoon Жыл бұрын

As someone who just finished Invisalign to close his two front teeth, I'm glad this video wasn't released sooner 🤣

@stevenparisi Жыл бұрын

Sorry, you're not allowed to call one feature a positive and a negative at the same time. Nice review, Coop. Buying one now.

@JimboBaggins42 2 ай бұрын

Of course he can. Like being with your Mom. Others may enjoy her, but you are not proud of that. A positive for some and an embarrassment for you.

@dannyfauteux2518 Жыл бұрын

I have a similar style bench, mostly the front pad is the same shape. The way mine is made because of the rounded cushion underneath the steel frame can't go to the end. The company put a piece of wood inside for support. On my bench that piece of wood snapped, now the front of the bench just bends so much it is useless. I was looking at this as a replacement, will it have the same problem?