Resin is very dangerous if your not setting a dedicated lab environment with proper PPE. yes im extremely confident in the kp3s. For out of the box user friendly its the best one and provides really good print quality. Looks like the pro will be next best one to buy.

Maybe check belt or just return it to amazon and snag a new one.

I guess I haven't noticed this issue? Like after tightening the bottom two screws for the z it's not level?

@@3DPrintsEverything Yeah, everything is tight. I was able to level the bed but it has an obvious slant. It prints fine it's just not square lol

@@WhiteRavenMobility you may have to carefully smack the piece of metal that the aluminum extrusion attached to by removing the bottom cover, removing the z axis, and then taking the z axis plate and unscrewing it from the sides of the base. That happened to my printer after I dropped it on concrete

Yes it should but if you have bl touch you will then do the auto leveling after doing the manual leveling

@@3DPrintsEverything yep that much I know, but since i got the cr10 s5 I havent been able to get as smooth a level as I did with the kp3s 😁 hope that doing it like this will help a lot.

Yes! It is 3D printed, but in resin.

@@3DPrintsEverything that's sweet, haven't gotten brave enough for resin yet lol 😆 Thanks for the shout out to "Rooney "

We also use the KP5L. It's a great printer, but not quite as great as the smaller version.

Its on thingiverse. Search kp3/s spool holder

How so. What are you wanting to calibrate with the extruder.

I cant find it either....they only come with tenlog printers :/

Thats odd. try to update the firmware maybe?

@@3DPrintsEverything why ? because it does not print in the center ? many KP3S models have this. Can be read in the official Kingroon facebookgroup. You just have to adjust the X under device properties in the extruder (for most probably helps -6.0). Allegedly, this is due to Cura because Prusa probably does not have the problem. I have never checked. That he bangs because of the end code 2x in the Y is also normal. It stands in the end code Y200 and 300 at the end of the print, but the Bed is only 180... that must bang. Therefore delete one of the two lines and change one to Y160. Is but also a known problem with the Curaprofil I'm more surprised that you do not know that with so many KP3S :) are both known problems. Ps: If you have changed the Y once and Cura only always installed over it, he takes over from the old Cura settings. perhaps you have that set times before long times the Endcode

They are in a video I posted about cura settings for kp3s

Kingroon filament is good, other amazon brands are good. Kingroon also sells the build plates you can buy from me at 3dprintseverything@gmail.com or from their website. ill make only a couple bucks if you buy from me but eitherway if you get her one thats all that matters :)

@@3DPrintsEverything I will purchase from you…thanks. Also will the CURA be a good idea to purchase, if she will be building a DND terrain and figures?

Either. I like texture better