R.I.P. Robert Earl Davis (Dj Screw)

DJ SCREW INVENTED CHOPPED AN SCREWED!

did not really learn to do it your way but i picked up the know how and am learning with my own technique. the info was really helpful. Thanks

I have been doing it the wrong way for soo long. This helped me in no time. I was able to showoff to my friends who kept using "flippin double" to chop

Preciate it bruh. I've been trying to figure this newer version out for a minute! Very helpful. Keep it up. Rock On!

Thanks. been wanting to since i had no chance since i was 17 and i taught myself n was used to VDJ6 and some c&s i had on my old channel DutchyVegas420 were iigh but this helped a shit ton thanks so much man.

Finally someone made it simple to do this. Thanks man

Good job really helpful

thx alot man, helped me alot! keep chopped and screwed alive!!

Thanks for the tip really helpful. Post more stuff.

Thanks this helps I was wondering how to chop and screw on iDJ Pro

wow im glad i learned the correct way

Very nice 👍

If you want the secondary deck to be off a beat then just loop it once and it will be exactly off one beat. That's what i do instead of rotating the deck and syncing it.

thanx alot it really helped me out appreciated it

DO YOU HAVE A COPY OF THIS MIX IT SOUNDS GOOD

Mastered it within 30 mins. Thx alot!

yo u explained and i followed everything...and it works perfectly on the first try..goodshit!

(I'm assuming you mean lowering the bpm one one so it goes slower then the other) I'm new to this myself, but if you play on different bpms it might sound good the first cupple times you switch over with the cross, but over time it will be really out of sync and just sound really bad. What I do is I have both in the headphones and play the second one a beat after myself, and just hope it sounds good. I like it this way because you have full control of how big the delay will be between the two, and depending on the song and pitch you might want the gap to be a bit longer or shorter to make it sound clean. Hope I helped!

this was alot of help

i thought it was a good video. thanks for putting this tutorial up!

this helped me out soo much....PROPS!!!

Can you record the song like make the song chopped and screwed then put it on your iPod ?

jaja thnx this is the best way out of all the others... thnx

I have a question? How do I h\get the slong to slow to a stop before i bring it back? Basically the backspin, just a lot slower. Thanks

great vid

Nailed it!:)

Is there a way you can take what you chopped and screwed and export it to share ??

thank you so much

foreal maynn i swear him nd suc are my inspirations

@Veezy This is the standard skin for 6.0.2 maybe you have a different version, but you can click the beat ahead on the beatgrid at the top.

thank you!

Thanks very usefull help out man

You Dont Have To Clone The Second One Just When You Start Click Play & Press 'P' On The Keyboard AT THE SAME TIME, & make Shure When You Start That The Second One Is 1 Beat Ahead. =)

damn good tutorial. best for s&c in youtube!

hey, this vid was really helpful. thanks for posting. I was messing around with the mapper to see if I could reprogram the spacebar to control the crossfader so that when I pressed spacebar the crossfader would jump from one deck to the other - but so far, no dice. Would you know how to do this correctly? Maybe I'm messing it up somehow...

thanks man....that was easy

where can i download that brake?

thank you bro.

how do you switch from the two decks without having to drag it ive seen people do it but i dont know how?

THANK YOU!!!!

EVERYBODY GO INTO YOUR VDJ SETTINGS LOOK FOR KEYBOARD SHIRTCUTS. FIND CROSSFADE CHANGE TO LEFT ARROW (crossfader goes left) change the other crossfader link underneath that one to RIGHT ARROW (makes crossfader go right) There you go left aerow crossfader foes left right arrow crossfader goes right. Enjoy :)

could you tell me the program you use to record your desktop with sound

jfc thank you so much this is perfect

right on dude...

Thanks for the tips but I have a question do you have to have dj controllers for that or can you just use the mouse to work the cross fader

Ohhh my god iFinally gott iitt.! Thank yu broo.!

Thank you

hell yeah thanx

Dope

Depends on the song. Some songs have such a slow bpm its better to go to effects and lower the key its in and keep the tempo where its at. But still follow all the cloning rules.

whats the diffrence between chopping ans slowing down the song? or is the same song?

Nice.. :) Thanks a lot..

Thanks for the vid man. Is there any way to record and export your mixes from Virtual DJ?

thanks

Nice video and quality I'll give it a try and let you know whats up

Hey do you chop and screw songs?

Thanks bro

i dont know what i'm doing wrong, but the 2nd deck doesn't start when i push the clone button

thanks man

@CHOPPERSUlT The first deck has to be playing before you can clone, maybe thats the issue? idk

how do you record it

Song - Fabolous - Lullaby

how do you record and save it?

wuts the name of the song

dude your tutorial was fucking amazing thank you very much. this blunts for you son, millz out

How do you record this?

If you use Ctrl+Page Up and Ctrl+Page Down it swings crossfader to the right and left for you. Lot easier. Hope I helped.

Song?

I'm finding it really hard to put the second track a beat ahead by spinning... any tips on an easier way.... or am I just gunna have to practise more

what song is that

cool

What song is that in the video?

Can anyone tell me the name of this song?

COULDNT LEAVE WITHOUT THANKING YOU TO FINDING ME A NEW WAY AGTER 50+ SONGS IT GETS OLD

helpful

Bruh, this is a great video, but what the hell did you do in that last step? It looked like you barely even moved your cursor or did anything. Right now I'm just using the beat jump to chop, but I'm hoping to figure out how they do that signature 3-peat thing that's so common in screw. Either way, thanks for the tutorial man!!!

@freelunch24 the easiest way to do it when i first started learning it is to have one deck 1 beat ahead of the other. You should use headphones that way you can hear exactly what you are doing. hope that helps.

how you record tho?

whats the method ?

Already bro,good tutorial(One Hunit)

@187LongBeach Lullaby by Fabolous

Make hot keys. There is an option to make most any key on a keyboard(button on physical mixer ect). Select a to skip 1 beat ahead then another to 1 beat back and then its easy to get set up for a chop right after a bring back a brake whatever. Hit sync then more the track not playing by hitting the skip beat +1 hot key

your gonna wanna set a cue point for that cuz once you scratch the second deck is gonna be further ahead then the first.

@ama2343 the easiest way to do this is to set two buttons as the crossfader, one for 100%, which is the right side and the other for 0 %, which is the left. since i also like to nudge left and right, i actually have five buttons for the cross fader in this order: [ 0%]--[ -10%]-- [50%]-- [ +10%]-- [100%]

RIP DJ Screw

@WhytChula You need to clone and then spin, I don't think you spinned the 2nd deck properly

....beat grid is the best effect when used right

some people mark the records to specific places they want to bring it back to, some people just got that shit down and can do it like that

Weird didn't work at all for me. When I pressed sync the BPM would jump up.

what song were you playing?

Whats the name of this song?

to chop just use the beat shit on top n drag the blue one a lil ahead of the red one so the long bar goes over another

Whats the name the this song? I know its Slim Thug, but whats the name of the song and album?

thanks brueh thill b sikk

@strgzr53 haha yep

Lullaby-Fabolous

kinda why he said the Correct way to chop n screw tho.

If anyone needs additional information on how to chop and screw I will answer any questions.

THAT THE ONLY WAY TO CHOP N SCREW LOL Dj el g !