The amount of staples you’ll need in each stack is 72 for anyone wondering

Before anyone wastes their time cutting the wrong size pieces; they have to be exact. A hair under 1 and 3/8ths. I use a razor blade to cut them. Be warned, because of the fragility of the staple stack, it can be a challenge so take your time!

This man’s hands are more stable then my brain

Staple sales after this 📈📈📈📈

*Me watching and trying dis late-night* *EVEN THOUGH I KNOW TOMMORROW IS MY EXAM*

the hardest part is to put the last stapel at the right position

I read most of the comments. Almost everyone wants to know what size staples to use, same question I had. (Note: a staple has a crown which is the top part, and 2 legs). Since the youtuber did not disclose measurements of his staples, I decided to use the old tried and true method of observation, and so, this is how to go about building your own cube: using the staples at hand do the first step he did: place two stacks with legs facing up, parallel to each other and separated by a distance slightly shorter than the crown. Use another stack facing down as to lock them up. Carefully stretch them out and measure what will be the width of each stack for your own project. Make sure the legs are shorter than the crown or it won't work. Mine came to 1 3/8". I used standard staples with 1/2' crown and 1/4" legs and came to a measurement of 1 3/8" for the length of each stack. Now, I don't have enough staples at hand, will have to buy some more. Once I build my cube I'll let you all know how it turned out. Have fun! 😊

This is still better than 5 minute craft...

What's the size measurement of the staple pin?

Had to try it. Those measurements are exacting, that's for sure! One staple too long or short and it doesn't work. But get it right, and wow, is that satisfying!

The last step is equivalent to GTA helicopter mission.

Before time began, there was... the cube

Awesome 🔥

The moment I completed it And hardly put it aside for a second it's ruined already 😐

how long does each piece have to be ?

I literally did but at the when i try to pick up and it got break...and it took me 30 minutes😢💔

Saw the short and I'm gonna try this Update: Now trying at work gotta figure out how many staples are in a brick here Update: Just finished! It's a bit lopsided since they aren't all the perfect size but it turned out pretty good!

Very cool, worth every second of my life

Tried it! Last step was a tight squeeze, but when it fit perfectly into place, it was so satisfying ☺️

What is the staple size for a tight cube? 24/6 23/8 or something else?

Are the pieces all the same size? Because I get to 0:18 and I cannot for the life of me get that second tower piece in. It looks like that side piece is just a couple staples too long for it to fit. Help?

Zajebiste 😊

I stopped everything & spent over an hour trimming strips to perfection to build this.

Amazing now I have to make one of those haha

For those saying that the cube is unstable...before making the cube try to press the sides of the pins (but dont break it) and then try

As a classical guitarist with long ass nails, this was extremely difficult to do.

Took about 4mins to get it done, last step was a bit tricky!

So clever!

How many did you make to make it look so easy to make one? It took me half an hour to assemble one of these cubes

when i was making i remember that i dont even have enough staple pin to make that cube

Какие скобы нужны? Какой длинны?

How long are the staple measurements

That's cool

16 parts, 52 pieces each 💪✌️

Really nice!

Tried a few times, but all unstable. Which stapler bullet that you use to get sturdy cube like that?

Here comes the legend

From cool to f it real quick😂😂

Nice bro I'm also completed that challenge 🎉❤🎉❤😮

I did it but the staples are loose..but not getting the way he is showing in the video..is there a gimmick

Would be nice to have an exact measurement of the staples

Drawing pin on top of the dark square Boris Johnson quits

Me : For the last step i need some one else.* Calling my brother*😅

That is awesome!!!

What # staples is this?#10 ones don't seem to work!

جالب بود

Bro l am sweating to try this

Me donning keeps falling!, then wait I’m out of staple!😂

My cube is flimsy even after doing all the steps, still it was fun

Cooll!!

Gets up and runs to office closet! 😂

As a person that usually dont have alot of staples , its a lose lose for me

please provide the brand and size of the staples...thanks

Nice

Doing this with small staples at a last stage was tough though😅😅

Before trying, use super glue to make the staple more stable.

Lunch-break inventions 😋

When you run out of stapler pins-

Im proud of myself bcoz I can do it with 9mm, 4.8mm Stapler. Santisfy with the result. Thankyou for sharing :)

I completed it, but it fell apart when I lifted it, it fell apart😢😢😢

How is it so stable? Mine fell apart as soon as I started!

me after trying this :- my patience is leaving i got the bucket to throw this,my patience is leaving i got the bucket to throw this, ayi ayi aaa i threw it at 1kth fail not much a i do my class.lol🤣😅

Worth every second of my life 🎉

each piece should be about 6 staples less than 1.5 inches.....or 1 5/32 of an inch

My question is can you do this without leaving a gap on two sides (as in all six sides look the exact same?)

The last step was extreme but it was totally worth it....Actually it takes 16 staples

Im going to try it wish me good luck😅😅

When youre one pin block short....

this cured my depression

Ну, пара штук у меня на столе уже стоит 😅

Sick! 🕋🎲⚙🖇

Its very cool and i made it too❤❤❤thanks for new thoughts

No pun intended, but I was bored of my grandmother’s house after work decided to go for a walk to Staples to purchase to Staples… 😂 or maybe I’m at Office Depot, who cares same thing anyways…

What size did you use bc when i tried it mine was to big

How Much Pins is used for making a perfect cube 🤔

I manage to close all the holes to make sure it stronger, except the last staple

Awesome

I did it after trying more than 10 times...but now the problem is my father wants staples and I don't want to give it to them😅😅😅😅😅😂😂😂😂

사장님 : 여기 뒀던 호치케스 알맹이 어디갔지?

looks like a minecraft house 😂😂😂😂😂😂

Mom, please buy me staples I've got tons of school projects.

Dexterous!

Guys before wasting of time ...some body tell how it can be stable when second last staple cant stay in its place even after putting last staple because there is something called gravity unless use of glue...

Easy peasy.. but there's a hole in your cube. 16 staple bars are not enough, you need 18 bars for a perfect cube. Mission impossible tho'.

I'm trying but it's not working.. It's not becoming strong.. Is this the problem of staple pins??

U can use tape To keep it together

Iwas at the last step when my plate or chotti or ponytail ruined it

I used tiny staples and it was super hard but at the end I was like, I can’t believe I made this! Must be how women feel.

This is so much more harder than it looks

pls note that this cube can just fall apart bc its kina loose

Awesome trick 👏, But newbie be careful last step can ruin everything

Which pins are needed mine are lose 😢

easy hack to do this: use magnets :D

Creative brother 🔥🔥🔥🔥

I just made this at work. Stopped everything I was doing. Because this cube was worth it.

Looks like the Spiderman cube

Bro ..do u know how hard I've been trying! My hand is so tired that i could barely write 😢

انت مبدع

anda se rompió 3 veces cuando ya casi lo terminaba

me tryna remove 1 or 2 staples at a time to get the sizes even lol.