I really appreciate this video. I think it solved my problem with the Mob6 2024. I had not done any soldering or firmware changes outside of changing the orientation of the battery connector.The quad was having failsafe/brownouts right after takeoff and resetting the vtx to 0 power multiple times. I decided to make one change at a time, and the first thing I did was go to status and identify which gyro I had. I had the one with the 3.2kHz update frequency and I changed the PID loop frequency from 0.8 kHz to 3.2 to match. This seems to have solved the issue. After two batteries of no issues, I also added the Karate tune preset, which made it fly even better. I've flown 5 more batteries since with no issues and will fly more later today. This is my first high kv whoop, and I am loving it now. Your video saved me a ton of frustration. Thanks again.
@im_ricebowl3 ай бұрын
I'm glad my video was able to help you my guy! sucks that were experiencing these issues with these AIOs but it's good to see that there is still a chance to get it fixed. Hope happymodel also acknowledges this and make appropriate changes. Also, I think that mindset of only changing a few things at a time is great and most of us (including myself 😅) should adopt that habit too. Glad I could help! and thanks for watching!
@Sugar_K2 ай бұрын
Never use dump from the cli.. use a diff all. A dump can over right hardware settings while a diff is only things that are different from stock. Dump can be unsafe if you don’t know what your doing. I’m a BF dev and wouldn’t use dump for a backup 😅
@im_ricebowl2 ай бұрын
hmmm but wouldn't using happymodel's actual dump from their website be exactly what the settings should be? also, may I ask if saving a preset counts as diff or dump
@Sugar_K2 ай бұрын
Prolly a diff.. preset save is a diff.. it’s 100% what you should use
@im_ricebowl2 ай бұрын
@@Sugar_K gotchaa will take note on that in the future! sadly that too didn't work when I was messing with this XD I believe the file I included in the gdrive link is a saved preset I took when I added my rates for the first time
@Sugar_K2 ай бұрын
@@im_ricebowl I made a small change to the karate whoop tune.. I haven't used it yet on my mob 6.. its in the post still and sporting there new hdzero aio prototype
@im_ricebowl2 ай бұрын
@@Sugar_K just realized you're THE sugarK 😳 thank you man for all your contribution to betaflight! half of my quads have your tune in them XD.
@Spookzuid3 ай бұрын
I like you’re style of reviewing. I’m not planning to buy a whoop right now but I just like watching this vid. Keep it going!
@im_ricebowl3 ай бұрын
I appreciate it! I know loads of other reviewers out there so I thought I'd find a newer way of showcasing these things. Will do! Thanks for the support!
@Spookzuid3 ай бұрын
@@im_ricebowl I hope you keep posting videos like this, it doesn’t have to be only reviews but maybe things like how to do some tricks or things like that. Because I find the way you film and edit entertaining in it self. I have notifications on!
@im_ricebowl3 ай бұрын
@@Spookzuid for sure! I got a few things planned rn including future frame designs and tricktionary stuff for whoops. I'll remember that compliment for a long time! I'll keep it up!
@shogunemperor3 ай бұрын
AWESOME VIDEO BRUDDAH!!! Lol thanks for the mention!! 🤣🤣 Glad u got it all sorted out!!
@im_ricebowl3 ай бұрын
THANKS FOR WATCHING FAM!!! I was actually gonna ask permission - ill do that first next time 😅...yeah shes flying great ever since! just wanna ask btw what you think about the frame?
@shogunemperor3 ай бұрын
@@im_ricebowl hahah always a pleasure bruddah. Oh no! Feel free to use it. Its public on youtube anyway! LOL great to hear shes flying well!! OH the frame? Its ultra light and awesome! Doesnt break so much but it does damage the props on hard impact. I actually like this newer frame compared to the previous iterations. HM did loads of tests on it. Im pretty happy with it really.
@im_ricebowl3 ай бұрын
@@shogunemperor thanks! I just think its good to get others opinions too especially from people who are more familiar with these things! yeah I actually 100% agree with this newer frame being better - personally also like that the battery tray holds batteries so much better. I just asked cause I was looking through reddit and YT a few days ago and saw people modding the mob 6 2024 to a different frame and thought "its a good frame?". Thanks again for the input!
@shogunemperor3 ай бұрын
@@im_ricebowl YEEEESSS!!! THE LIPO DOESNT EJECT ON ITS OWN!!! hahahhaha have an awesome week and happy flying bruddah!!
@im_ricebowl3 ай бұрын
@@shogunemperor You too man! thanks again for the little chat!
@Dmytro_993 ай бұрын
Received 2 of such mob6 and both have noise when you arm motors. When you disarm picture clear. Tried to solder runcam nano3, same issue. Very dissapointed with quality.
@chorchecze3 ай бұрын
Have noise in video after koderate crash. Resolder everything, try different camera. No luck.
@im_ricebowl3 ай бұрын
same here I had higher hopes for this one but I think it's a matter of the aio. Gonna try to use this camera on a different drone
@im_ricebowl3 ай бұрын
@@chorcheczeseems like happymodel has a lot of things to fix. We're gonna have to wait a little longer for this to be a viable whoop
@kaskalo22 ай бұрын
Same here. When i arm it, there is noise. When i disarm it, it goes away.
@thetubemeister822 ай бұрын
Same. Noisy video on arming. Seems to be an established pattern here. Anyone found fixes?
@h2o40fpv3 ай бұрын
Thank you for this video you gave a lots of tips .
@im_ricebowl3 ай бұрын
glad I could help! the more information the better!
@LFTal813 ай бұрын
Thanks for that. I definitely made backups before i started doing anything
@im_ricebowl3 ай бұрын
hope it works out man!
@nyclassic4ever130Ай бұрын
Sorry to hear, i have 2 and no problems...just some jello.
@galardo33038 күн бұрын
The mob 6 eco is a mess too. It literally eats the batteries. New tattu batteries are swelling up and get noticable damage. They dont hold the voltage as well as before. The eco vtx is sucking so much power, that flight times of a minute and a half are normal for cruising... And the worst part is, happymodel isnt responding...
@im_ricebowl8 күн бұрын
@@galardo3303 bruh what is happening with the mob 6 XD I've heard similar cases as well related to power. For sure happymodel needs to do smth to address this cause the Air65 is doing a lot better
@galardo33036 күн бұрын
@@im_ricebowl its a rolling dumpsterfire. Im now in contact with Gao from HDZ and this dude is so helpful with that issue. One email and HM is responding. They now told me to flash to beta 4.5 and try again. Im scared for my Tattus 😂. I already bloated 3 of my 5 (new!!) Tattu 300s. It sounds a lot like the fault lies in the SuperX HD at the moment.... HM and light boards apparently dont mix well. Think about the elrs diamond board. That thing was a dumpsterfire too acording to the forums.
@pokematteus25149 күн бұрын
thank you for making this, i thought i was going crazy, i have experienced some of these issues, now i have no vtx signal in my goggles and im not sure what to do?
@im_ricebowl8 күн бұрын
if you've modified anything software related, I suggest going to HM's website and using the diff file that they provide. if you haven't done anything in betaflight, best to leave it as it is for now. Check if you have low power mode enabled and check if you're on the right band/channel
@FlyturboKwad2 ай бұрын
Love the intro music selection!
@im_ricebowl2 ай бұрын
thanks man! kept playing this intro when I was editing XD
@Sprote13 ай бұрын
Hey man. Great Video really nicely produced. Im from the Reddit post. I soldered a new Battery plug and I have power again. I will try your settings and see if my rebooting will also stop. Prayge. Thanks for all that information in the Video.
@im_ricebowl3 ай бұрын
Thanks man! glad I can share some info and hopefully give some solutions. I hope she flies and I hope the rebooting goes away
@Sprote13 ай бұрын
@@im_ricebowl So I cranked up the PID loop frequency and it doesnt reboot midflight anymore. Now I have a different problem. When I startup it just goes crazy and reboots several times when I try to fly. I have to wait a bit before I start flying so that doesnt happen. I wait a bit and than it doesnt happen when I take off. Do you have an Idea what could be causing that?
@im_ricebowl3 ай бұрын
@@Sprote1 it could be overloading the processing a little but given that you're now at a higher pid loop freq. Have you applied the other settings I've changed?
@Sprote13 ай бұрын
@@im_ricebowl I only changed the pid loop frequency. With Pid Tuning and everything I still wanna wait a bit. Im currently Watching Bardwells series where He explains Betaflight so I wanna learn everything about Betaflight so im going through that. But my DShot was already at 300 and the other setting where the Same from mine. But the Pid loop frequency seems to have fixed All my Problems. I havent had a reboot for 7 Batteries and it is only a bit weird in the beginning. But this has also calmed down a little bit and I can Deal with that. So again thank you really much flying is fun again and Im grinding again on my journey of FPV. It is a lot to learn but its also kinda fun. Keep up the good work man. The Intro Song is btw a banger. Have a nice day.
@im_ricebowl3 ай бұрын
@@Sprote1 that's a good thing to have as a habit fam! I'm glad you're taking extra steps and learning new stuff too. Hope you have a great path in your fpv journey. though it's hard sometimes and well have to trouble shoot, rest assured there's probably resources about it. im glad it helped! not entirely sure what the issue in the start is about but I hope it turns out well as the mob 6 2024 does fly well when it works. thanks for watching and supporting the channel! I'm lucky to have you guys!
@Jboe8882 ай бұрын
Thank you so much for your video you give my reboot issue and now flies great. You mentioned there might be more improvements to gain in the pid tune and just wondering if you have found them yet or have you updated your pid settings?
@im_ricebowl2 ай бұрын
I'm glad I could help! I actually talked to several pilots in reddit and some have suggested that I go to BF 4.5 and reapply the diff on HM website. I haven't tried it since I'm a little busy with some things but a few have had good luck with that! As for my own personal PID tune, still stuck on what I have here since - seems like every time I push PIDs too far, I start getting reboots
@risler58263 ай бұрын
Nice info bro, was just about to buy one but if im buying a bnf then the bloody thing should be mint from the get go!
@im_ricebowl3 ай бұрын
agreed man, it's annoying and at that point, it would've been easier to build a custom whoop. Thanks for watching fam!
@matt_mega3 ай бұрын
Have you heard about the motor noise issue in the video signal of some mob6 2024? There are white diagonal lines in the picture when the motors are running. It is very annoying and I am desperately searching for a solution. As it seems your model was not affected. Do you have any idea what could be the reason for that or a hint where I could find other users for discussing this issue? Thanks!
@im_ricebowl3 ай бұрын
my model actually has it too 😅 I think the dvr kinda has lower resolution but it's very obvious on my fatsharks. I did manage to lessen it a bit using the settings I have but it seems to be caused by some other issue. Some have also suggested replacing the camera but that has mixed results. I'm just at a point that I don't want to tamper it anymore 😂 while it's flying well
@matt_mega3 ай бұрын
@@im_ricebowl What do you mean by replacing the camera has mixed results? Has anybody tried it, if with a different camera the noise lines are still present? I ordered a caddx ant lite and hope that this will help. The original camera of mob6 2024 is a nightmare anyhow. :-(
@im_ricebowl3 ай бұрын
@@matt_mega I personally have changed between the runcam nano 3 and the 199c cameras and I still get those lines. However some other pilots say changing cameras fixes it. side note, not sure if you want to use the caddx ant lite for this since its a fairly large camera compared to other whoop cameras - essentially gonna take the bulk of inverted crashes and is a little heavier.
@matt_mega3 ай бұрын
@@im_ricebowl Have you tried to shorten the camera wires as much as possible? Besides that a small capacitor on the power lines of the camera either on the aio side or on cam-board side could help as well. I will test this when I got my ant lite and the problem still persists. Is the ant lite really so much larger? The diameter of the lense cover and the size of the board seem to be the same. Weight is almost the same or even less then from the original cam fx17-b .
@im_ricebowl3 ай бұрын
@@matt_megaI did not try to shorten the wires as mine already has short wires and I don't want to stress those wires when I disassemble this. I also don't want to modify anything with the circuit given that a. this is a bnf that shouldn't be tampered with that much b. I don't want to risk it (as mentioned in my video) and c. I don't really mind the lines at this point - as long as she flies fine and those lines are minimal. my ant lite is coming at 1.6g without any wires or connector. You're right, compared to the 2024's camera they're the same size but you will need a diff canopy. idk, I'd prefer the 199c, pinch cam, or the betafpv c03. any of the smaller lighter cams
@Trippydozer3 ай бұрын
Hey man is there any tune you recommend? Just got mine today and loving it except it’s just a tad jumpy sometimes and I might try some expo first but my thing is when getting out of power loops around my room or a matty it can be a bit tricky getting out of it sometimes but again could just be bad piloting since I’m mostly used to outdoors😅
@im_ricebowl3 ай бұрын
I agree the tune is a little off and the other reviewers did mention that too so it's not just a new batch issue. I know Nick burns is using the karate whoop preset (or smth like that forgot the name) and Infinity Loops went straight to quicksilver
@Trippydozer3 ай бұрын
@@im_ricebowl yeah I just tested out the karate tune out and I can feel some difference But id like to test it in a tighter area tomorrow hopefully to try pushing my limits. Was also texting with infinity loops thru his discord and he’s also running the karate tune he was helping me thru it getting it set up which was awsome
@im_ricebowl3 ай бұрын
@@Trippydozer great to hear it fam! yeah the whoop community is really helpful and were lucky to have guys like infinity loops! hope your mob 6 performs well when you test it!
@terryokada3 ай бұрын
Thank you for sharing. At 4:45, this is exactly what was happening to my Mobula6 2024. So, was that the solution for it? Re-soldering the pigtail?
@im_ricebowl3 ай бұрын
I think it was because of something regarding filtering and Pids since it was "solved" when I set PID loop freq to 3.2 khz and having my filtering and pids set as shown in the video. I think it's "solved" cause playing around with the master slider (increasing it beyond 1.1) increased the chances of the whoop randomly rebooting. feel free to try my backup file but yeah - be careful. in some of the links I've included in the description, someone suggested a faulty regulator but I noticed I would get random reboots even in the start of the flight so I'm not sure if that's what I had.
@im_ricebowl3 ай бұрын
let us know if it goes well! seems like it's a more common issue than I thought @@terryokada
@Digital-Light2 ай бұрын
@@im_ricebowl I also have the same problem couldn't solve it yet
@rainsquadfpv3 ай бұрын
Heads on infinity loops flys it on quicksilver makes it more locked in
@im_ricebowl3 ай бұрын
oh good point I should try that....tho a bit scared since I'm sure his mob 6 didn't have the same issues as mine - idk if those issues would resurface but I'll try when I get to
@rainsquadfpv3 ай бұрын
When you do talk to heads about it he'll help you out or jump in to one of infinity loops live streams
@Kleinage3 ай бұрын
@@im_ricebowlquicksilver probably won’t cause any more problems, and might solve some. I have two janky old mobulas and they run better on wuicksilver in some ways. I always have trouble getting all the motors to start but ehhh they’re old and bashed, and I eventually get them flying. I hope your hardware issues can be resolved quickly.
@DronePsyche3 ай бұрын
Return of it doesn't work out of box next time. Unacceptable to have to troubleshoot something that is brand new. It's called defective
@im_ricebowl3 ай бұрын
It was "working" - my picky brain was just by those first few issues that lead to me having more issues. But yeah, you're right. Communicate with the seller first
@jeffmcclain3 ай бұрын
@@im_ricebowl You *have* to expect to be able to upgrade/flash the FW at some point. I'm not sure your self criticism is deserved. *and* when you wait for a LONG time for a back ordered item, you really don't want to send it back, which really sucks when it ends up being not great or easy to fix. I *totally* get you trying to resolder leads, and how much that screwed / limited your options. :( Sorry Mate!
@im_ricebowl3 ай бұрын
@@jeffmcclain I agree fam! it sucks to have to send something back and wait longer - even more when you're as hard headed as I am 😂 who thinks I can fix it myself. We win some and loose some. But she's flying well right now so I'm not complaining anymore 😂
@MrDfsafdsafds3 ай бұрын
I'm having the same problem with rebooting. I tried changing the PID but no improvement
@im_ricebowl3 ай бұрын
have you tried changing PID loop freq to 3.2 khz? that's what made the most difference to me....unless your issue falls within the other issues in the links I've provided in the description
@microdroneunderground3 ай бұрын
Good info dude! Think I'll build a 65mm for my wife instead. 😎
@im_ricebowl3 ай бұрын
I always push for custom builds 😎 hope it flies great fam! thanks for the kind words!
@xyic0re7142 ай бұрын
@Rice_Bowl Please can you tell me how you fixed the random fall out of the sky FC reboot? I have this exact issue and have looked everywhere!
@im_ricebowl2 ай бұрын
hey man! umm I'm not 100% about fixing it yet but send me an email and I can send you my settings if you wanna try....theres a link in my channel and that should lead you to my email!
@grognatou2 ай бұрын
this is real, this drone is less strong than a race quad
@im_ricebowl2 ай бұрын
It do be like that tho so far it's been flying well for me in my latest testing this past week. Might give an update to it soon
@eyeflytinkerings3 ай бұрын
Great video! May i ask what is this little monitor thingy that you have in front of the keyboard? love gadgets like these :)
@im_ricebowl3 ай бұрын
and thanks for watching! ohh the white flat thing with a screen? that's my DIY fpv monitor (from my first box style goggles that I disassembled). Pretty useful during diagnostics or especially showing others my view while I fly.
@eyeflytinkerings3 ай бұрын
@@im_ricebowl I see, thanks! That does sound like it might be worth another video 😊
@im_ricebowl3 ай бұрын
@@eyeflytinkerings I'll consider it! a few have asked about it tho my issue is that the circuit board is different per brand/goggle...but I'll look into that! maybe I can find a small display and find a cheap video receiver so it's not dependent on goggle guts
@TRANSMISJAorg3 ай бұрын
I also have video noise the same as yours after I arm my Mobula6 2024. I didn't see this problem when I watched the reviews on KZfaq. Are we getting a lower quality product when we buy this drone? My drone can reboot after a hard landing. And it reboots twice in the air during a calm flight.
@im_ricebowl3 ай бұрын
Exactly! and atleast from my own testing, changing some betaflight settings also affected it. Though I don't know which ones. I hate to say it but it's possible. Especially since they're probably rushing with so many pre orders. Carefully try my settings. Idk if it'll help and I can't guarantee if it'll work but I've crashed mine tons and have reached voltages around 2.9v without those reboots occurring so far. so from my own understanding, it's not a regulator issue, but it could be either a software issue or qc issue. idk yet which one.
@jayzzz12343 ай бұрын
I'm having the same issues I have 2 mob 6 24 both look perfect when I plug my battery in as soon as I arm both have noise coming through, thank you for making this video.
@Kleinage3 ай бұрын
@@jayzzz1234ok it’s more of a big drone thing but have you thought about soldering a small capacitor on to where the pigtail attaches to the board? It made a huge difference in my 5” drone, maybe would help here too?
@Dmytro_993 ай бұрын
Did you find the way to fix this issue? This all in one looks so promising but the issue with noise dissapoit me a lot
@rubberonasphalt3 ай бұрын
If it was just video noise, I'd say it could be the antenna. You may want to re-seat the antenna, or try another. Also worth trying setting video to Raceband 8, if you're not already on it. But rebooting after a crash sounds more like a board or power connector issue. Check if the battery connector's solder joints look normal, if it does, then I'd probably try to contact seller for a replacement/ refund
@Braincho2 ай бұрын
8:08 - Motor poles 12 goes for this specific drone or ? how exactly does it work?
@im_ricebowl2 ай бұрын
It's specific to the motors and you can actually count the number of poles on the motors, but it's a standard for whoop motors to have 12 poles
@Braincho2 ай бұрын
@@im_ricebowl Are poles - magnets? Was a general question. So I just look at my motors and make sure in betaflight in this section the amount is correct?
@im_ricebowl2 ай бұрын
@@Braincho yupp betaflight actually states it as number of magnets if you check the motors tab. Most times you dont have to check as motor sizes usually have a standard number of motor poles. I believe smaller motors like for whoops have less poles mainly cause of the limitations of manufacturing at this scale
@jeffmcclain3 ай бұрын
I'm not sure I understand what was the root problem of it dropping out of the sky and rebooting or not saving/using your custom rates????? Nothing you were doing looked wrong or seemed to be unreasonable on expectations. I'm now wondering if you have bad/buggy hardware or what? Please let us know! Sorry for your frustration with this model!
@im_ricebowl3 ай бұрын
Im unsure too sadly. This is just what worked for me and changing betaflight settings completely to a custom one was my only solution as of right now. It does seem weird since the things I did was what I've been doing for other BNFs I've had in the past but I think it's just that this hardware is so new that it's likely a mixture of qc issue and software issues - based on a number of responses here. It's flying well right now so atleast there is that. No worries!
@gtc7160Ай бұрын
How did you manage to change the gyro update frequency? My 2024 came with BF 4.4.2 and the frequency is automatically locked. That is a new feature of BF. Mine is locked at 8.00 KHz
@im_ricebowlАй бұрын
@@gtc7160 I believe gyro is locked but the PID tune is what I changed. Also, you may have a different superx version/gyro cause it's locked at 3.2 for mine (I believe mine is superx V1.0)
@gtc7160Ай бұрын
@@im_ricebowl I do believe we have the same board. I checked your backup file. Mine is version 1 also. The manufacturing date is probably different. In your video you are flying very quickly. Not mine. Maybe they swapped in a gyro which isn't doing so well. I see yours is locked as well. The number underneath (PID loop freq) should be at 1.6 according to BF. It is supposed to be half of the gyro freq. I have a Mobula7 1s with ELRS and out of the box it worked just fine. I have a Tiny Hawk I & III. The 7 is a breath of fresh air compared to them. I have a small space to fly so was hoping the 6 would be even better. I found a place which still has a regular Mobula6 with frsky even. So hopefully it will be more NORMAL
@im_ricebowlАй бұрын
@@gtc7160 can you go to cli and type status? perhaps we do have a different gyro. Mine says BMI270
@nik94343 ай бұрын
Hello mate, I have mob6 as well, could you please help how you fixed mob falling out of the sky (4:45). Because I ended up running into the same problem. Anyway, very good video, thanksn
@im_ricebowl3 ай бұрын
so far, reflashing (firmware shown in 4:21) and changing the settings shown in 6:28. thanks man I appreciate it! hope it works but please make sure you've done the things I've mentioned in this video like making a backup...never know what could happen yknow
@cod4scoperАй бұрын
My VTX went out after a crash, I replaced with a zues nano, but now I can’t get it to connect to my controller when it was already binded before? Can’t get to go into WiFi or anything. tried dump from HM and re flashing. But no avail. Think the board is just toast at this point
@im_ricebowlАй бұрын
if the Vtx wasn't connected, would rx go back? I also want to ask if the Vtx was set to it's max cause that vtx is probably more towards toothpicks and larger drones and may be using up your entire 5v rail
@cod4scoperАй бұрын
@@im_ricebowl I think this might be it. my second mob 6 VTX went out today too… tried to throw the zues on. And same exact thing. No controller. Just took the zues off, still no controller, but if I bridge the VTX again I regain controller
@im_ricebowlАй бұрын
@@cod4scoper both the serial rx and msp vtx are on uart 1 so I feel like there is something happening with the Zeus being connected. Not entirely sure tho. Also damn a another broken vtx XD
@cod4scoperАй бұрын
@@im_ricebowl hooked the zues back Up after bridging the VTX power bridge again. Everything works!!!! My old board probably works too… going to throw that one back together and see. So VTX bridge needs to be intact for ELRS to work it seems.
@im_ricebowlАй бұрын
@@cod4scoper glad to hear you got it to work fam! hope she gets back up in the air soon too
@asparagus2003 ай бұрын
hey i'm having the same issue as you are with my drone shutting of and restarting 2 seconds later, it only seems to happen with a highly charged battery, could you please help me to fix this issue?
@im_ricebowl3 ай бұрын
that seems to be another common issue but that's actually different from what I have with mine. But, I have some links you can check in the description (particularly the reddit link) from people that have the same issue. hope it helps!
@asparagus2003 ай бұрын
@@im_ricebowl its identical to the DVR you showed in the video, I tried to apply your filters and PIDs but it still happens. Mobula 6 flies for a bit then restarts mid air, cutting out video and control link.
@im_ricebowl3 ай бұрын
@@asparagus200 the resulting effect is the same but the cause is different. mine never rebooted in the start - mines likely a processing issue but yours could be a regulator issue as mentioned in those reddit replies
@jeffmcclain3 ай бұрын
@@asparagus200 Sounds like something is over heating. Especially with the "fresh/high battery" data point...
@LFTal813 ай бұрын
How did you get the mid air death to stop? I have the same issue with myne dying mid flight
@im_ricebowl3 ай бұрын
I changed my betaflight settings entirely. I changed PID loop freq to 3.2 khz which helped alot then I changed my PIDs and filtering to what you see in the video. I'm still playing around with settings but it's working well so far and I have not had random reboots. though take in mind the things I've mentioned in the vid and make backups before making any changes
@jeffmcclain3 ай бұрын
@@im_ricebowl I think you should not have to reduce it if your system utilization isn't too high??? Not saying this isn't a great fix, just seems odd. I would expect that FC to handle 4khz easy and possibly 8khz if you don't have a lot of filters and other things running. I mean MSP plus one serial is all it is running.
@im_ricebowl3 ай бұрын
@@jeffmcclain the original was PID loop freq was at 1.6 khz actually and the highest you can go on this fc is 3.2 khz which is why I went to that. Now that I think of it, weird how the superbee f4 can do 8K
@Oldemonium3 ай бұрын
Why did you change the vtx antenna ?
@im_ricebowl3 ай бұрын
actually changed it 3 times (to the maple micro CP antenna, to ORT Micro Vee, to this simple DIY dipole) to see if it changed the noise in the feed but no change. And since I just fly in my room, I don't need the range but the lower weight helps!
@Oldemonium3 ай бұрын
@@im_ricebowl it seems like they had a hard time in production ! I just received mine without any antenna, manage to plug a TBS unify pro, But now the reception is all black & white, and after a minute there is a reception degradation until I only see snow. Plus the board is getting really hot on the FC... They promised a lot but failed to keep up the production.. How does yours hold ?
@Dorff_Meister3 ай бұрын
I pre-ordered the Mob6 2024 in March. Still waiting. I think I'l probablyl cancel for now.
@im_ricebowl3 ай бұрын
yeah I'd honestly stick to smth like the mobeetle for now. If HM end up making an update, I think that would be the best time to try it out again
@Dorff_Meister3 ай бұрын
@@im_ricebowl Cancelled. I'll reevaluate in a few months. Thanks for the video helping me rethinking the purchase. I'd already kind of gotten there, but just hadn't done the cancellation.
@puc192 ай бұрын
Hello, I have no osd in this drone
@im_ricebowl2 ай бұрын
was it like that immedietly when you got it?
@puc192 ай бұрын
Yes
@im_ricebowl2 ай бұрын
@@puc19 you'll want to consult your seller for that 😅
@BergeronFPV3 ай бұрын
Wait I literally recieved this exact same thing and mines white
@im_ricebowl3 ай бұрын
I believe that's the eco? unless they're shipping out white analog versions now which I didn't know
@BergeronFPV3 ай бұрын
@@im_ricebowl oh wait you right mines hd zero
@HB44813 күн бұрын
For what I want to do with this I actually enjoy the janky video footage Should I be concerned otherwise?
@im_ricebowl10 күн бұрын
footage is really the least of your issues XD it's the rebooting that make me hesitate
@modquad183 ай бұрын
Hmm, wonder what was causing the control Rx and video noise issues?
@im_ricebowl3 ай бұрын
not entirely sure but updating the uart rx helped and vtx started working again when I reflashed it a few times to 4.4.0
@FATSNAIL-FPV3 ай бұрын
Great video! buuuuuuuut what keyboard is that on your desk? looks really nice and compact! Ducky one 2 mini is becoming les handy since i need arrow keys now..
@im_ricebowl3 ай бұрын
thanks man! it's the royal kludge 65 but the royal kludge 68 has the form factor of this plus additional keys like arrow keys. Was gonna get that but it wasn't available. Higher recommend royal kludge for budget keyboards!
@FATSNAIL-FPV3 ай бұрын
@@im_ricebowl good to know. Thanks!
@Digital-Light2 ай бұрын
!!!SOLVED!!! at list for my quad. my drone shut off and restarted 2 seconds later, I watched this video(link below) and made all the settings changes described in the video( from 52;30 to 1;12;30) and it is now working just perfect. kzfaq.info/get/bejne/iaydiKmmuavdnWQ.html
@im_ricebowl2 ай бұрын
that's great! hope this helps people aswell. Great to see more and more people finding solutions to these! Side note, a couple of pilots have also told me that going to BF 4.5 and reapplying the diff from HM's website fixes their issue. Haven't tried it yet but hope this helps too!
@Digital-Light2 ай бұрын
@@im_ricebowl thanks!!! It's nice to have several options to try to fix it
@fatstacksworldwide2 ай бұрын
Just don't buy this quad. Happymodel released a broken product and aren't interested in taking responsibility for all the customers they robbed.
@im_ricebowl2 ай бұрын
that's true. Sucks that they hyped it up so much and I genuinely wanted to see this live up to it. Hopefully they fix it soon since this had so much potential. Heard the newer batches had less video noise tho? atleast there's that XD
@cicadafun17 сағат бұрын
@@im_ricebowlhas it been fixed?
@im_ricebowl14 сағат бұрын
@@cicadafun the noise in video is inherent so idk if it'll ever be fixed. I never had the lipo killing issue so idk how that can be fixed or what the symptoms are. The rebooting, atleast for me, is fixed and the changes I made are in the video. That's all I can say about it cause it really gave me a headache and I'd rather just move on than tinker with it at this point 😅
@cicadafun10 сағат бұрын
@@im_ricebowl i see..I hear the new batches with the V2 AIOs now seem to be mostly fine so I was curious about it.
@brandon96892 ай бұрын
This is a rushed, broken product. I'm convinced the first wave of reviewers got a quality controlled batch. If this was my first quad, I'd be tempted to blame myself. But I was extremely careful with it, no crashes and no major changes. I added flight modes, flew it stock settings for 5 minutes and the camera is dead.
@im_ricebowl2 ай бұрын
Sucks that we get this kind of product given how much hype was behind it and the fact that it honestly had the potential to be a pretty great bnf. Have you tried returning it? or talking to the person you bought it from