Mobula 6 2024 // New Learnings & CallOuts

No video

Mobula 6 2024 // New Learnings & CallOuts

Рет қаралды 19,186

Nick Burns

Күн бұрын

Пікірлер: 177

@The2xWhiskey 5 ай бұрын

MoeFPV has some creative editing talent in addition to flying skills. Thanks for calling his channel out!

@DyoGTS 5 ай бұрын

Thanks for putting out this update! I appreciate you following up with the questions that we've had!

@kaskalo2 5 ай бұрын

Around year ago I bought Mobilte7 for $80ish, with 2 batteries included. That was a good deal!

@NickBurnsFPV 5 ай бұрын

That was, our good deals now are much more expensive. :(

@Tokyo_Dom 5 ай бұрын

Mobula6 was $85. HM whoops have typically been under $100. Betafpv have been a bit more expensive historically, and it's $110, cheaper than this...

@MoeFPV 5 ай бұрын

Great follow up Nick! I am surprised the new cam is that heavy 😨 I do like it more than the nano 3 but not sure if I like it more than an ANT for that weight.. can’t wait for your thoughts on the HDZ eco version, as well Thanks for the shoutout !!

@NickBurnsFPV 5 ай бұрын

I kinda thought it had to weigh more, but I was hoping for .3 of a gram more, not .7. I already have a 15 grame 65mm whoop and I really don't find it flies better or longer than the mobula 6. You have an HDZero/ECO version? 100% my pleasure to signal boost your channel. Quality stuff, more need to see and follow.

@NickBurnsFPV 5 ай бұрын

shoot. A commenter just noticed my link to your channel didn't work. I have corrected that. Sorry for my blunder.

@MoeFPV 5 ай бұрын

@@NickBurnsFPV Very true - even with the extra weight of the cam this mob6 is still eons lighter than anything I usually fly 😅 I do not have the eco mob 6 unfortunately but I have a board on the way. I think I am going to build up a 75 with a focus on weight savings . Just a little anxious about what sacrifices they needed to make to lose the mipi and drop some weight 😰

@NickBurnsFPV 5 ай бұрын

@@MoeFPV To my eye the ECO camera is still very good and maybe on par with the heavier RC nano HDzero camera. Has settings we can change as well. And its still alive through all my flying. :)

@mattraymond2935 5 ай бұрын

Come to a whoop race 🏁 😊

@NickBurnsFPV 5 ай бұрын

I would like to. It’s hard with work and kids still at home and a busy wife. At this time I tend to sponsor in my absence

@StoneFPV- 5 ай бұрын

Great video! I purchased one off of AliExpress about a week ago and the total price came to $132. It says it’ll be delivered by the 22nd so hopefully it ships soon.

@kurtzFPV 4 ай бұрын

Did you get yours yet? I've for one on order art getfpv.

@_tcmore 5 ай бұрын

Great reviews by both you and Moe!

@NickBurnsFPV 5 ай бұрын

Thank you

@shalotfpv 5 ай бұрын

Such a sweet hat!!! Always grateful to learn from your experience Nick :D

@KcCake 3 ай бұрын

Great review nick! Got the mob 6 yesterday from pyro and have around 50ish packs on it. One note: my cam leans left too but mine came like that. I believe its because the canopy sits on top the cam wires. Anyway i printed a bigmcstinky canopy and placed foam underneath the cam to offset the width of the camera wires and it works good! The stock tune with bi blade props is very poor though. Definitely needs some adjustment. Been super fun to fly though!

@brianfreland9065 5 ай бұрын

love MoeFPV! id have to admit i havent seen as many hours of his vids as i have yours but Moe is definitely one of the micro channels i stop and watch everytime i come across a new vid! both you guys are great!

@cold-frontin_penguin7902 5 ай бұрын

Moe FPV is my new favorite pilot/channel.. dude is so humble amd makes great content

@NickBurnsFPV 5 ай бұрын

Agree on all points.

@stlzjguy 5 ай бұрын

Nice perfect whoop

@ProjectMockingbird 5 ай бұрын

at 6:36 you show ESC Configurator, and I noticed the ESC's aren't at 48khz? I can't complain about your battery life (the usual reason to go 48 and lose the benefit of resolution of 24) but maybe that's why you have that start up issue? Just opened mine and it seems like they are all shipping without 48khz if I'm seeing this right

@LJW_FPV 3 күн бұрын

My first drone the Emax EZ Pilot Pro suffered the twitchy motors and the 2nd aswell (Meteor65 2022). Now only one of the motors is starting up normally. Flight time is also decreasing from 3:40 to 1:50. Bad AIO board? Anyway, I ordered the Mob6 '24 and fingers crossed it lasts a bit longer.

@NickBurnsFPV 3 күн бұрын

decreased flight time is a sign the battery connector on the quad is getting worn out and needs replaced. This is an issue we have long had with ph2.0 battery connectors. Thankfully we have new, more robust connectors, like the BT2.0 and GNB A30.

@brandon9689 2 ай бұрын

My mobula 6 video feed died after 2 hours. Most of that time was spent setting up flight modes and charging the batteries. It was flown for about 5 minutes before the camera died. 3 total flights, no crashes and now the video feed is dead.

@NickBurnsFPV 2 ай бұрын

Its going to be hard to hear but when the usb is plugged in the vtx is active. When the vtx is active it is creating heat, this is normal across almost all AIOs. This heat is likely the culprit to the issue you experienced. I use a small fan on micros when setting them up. Of course it takes me about 10-15 minutes to set them up.

@twitch-sword3211 3 ай бұрын

Great review, would you recommend this drone or the BetaFPV meteor 65 pro for flying around the house?

@NickBurnsFPV 3 ай бұрын

The 65 pro uses 35mm props if I recall correctly, This is fly more aggressively, making it less useful inside for some, but better outside.

@ronniequalls7217 3 ай бұрын

This whoop is way better than the Hdzero mobula 6 eco , the performance is no comparison, performance over video quality, jmo!!!

@perplexedintellectual6918 5 ай бұрын

Please do a review of the new avion rc ikon 2.5, thanks! I trullly enjoy the vids ❤

@NickBurnsFPV 5 ай бұрын

working on it. Got a bit delayed as we started getting weather. I did get around half my flying done on that one.

@perplexedintellectual6918 5 ай бұрын

@@NickBurnsFPVcan’t wait! 🩵🩵🩵

@marathi22 4 ай бұрын

Spurring motor might be your bluejay flashed at 96kHz. Reflash with 48kHz and chances are your motor will spin up just nicely. Maybe you could even lower your startup power too.

@dickvancampen3318 5 ай бұрын

You're right seen them for 140 Euro sa yes have 9 whoops so wil see

@andAgainFPV 5 ай бұрын

hey Nick! Looking forward to trying this one out. Perhaps a bnf i can just race without building ? I've found my twitchy motors are almost always a broken motor wire. Tyrantt put me on to that one.

@NickBurnsFPV 5 ай бұрын

But wouldn't it always be twichy if a motor wire were to be broken? In my case sometime its fine.

@andAgainFPV 5 ай бұрын

i found the wire breaks inside the insulation, the broken ends mostly touch each other, hence the intermittent power. @@NickBurnsFPV

@NickBurnsFPV 5 ай бұрын

@@andAgainFPV that is true. I have experienced wire breaking inside as well.

@KCQuadTronX 5 ай бұрын

iiut isnrt good that those aremaxed out ...that may be why its doing what its doinmg...try turning it back down to default and then maybe turn the boost up a little but definbitely not that much.....I am shocked it even is flying at all like that lol

@Nspecthergadget2010 5 ай бұрын

Great recap. 65mm don't feel right after flying 85 2s. But I'm trying😊

@nychu4 Ай бұрын

What propellers are seen in the video please?

@Mupshot 5 ай бұрын

that must be why no one is selling that board. but I want the HD one to properly fix my mob7 walksnail. I lost two superbee boards in 3 months and just figure it doesnt have the girth to handle the bigger motors and weight of the VTX.

@RECK_Adventures 5 ай бұрын

Those kind of camera mounts lead to parts dying in my experience.

@cbn5900 5 ай бұрын

Waiting for AHD version😀

@NickBurnsFPV 5 ай бұрын

Coming on the 10th. Not long now.

@DylanBogusz 5 ай бұрын

AHD?

@NickBurnsFPV 5 ай бұрын

@@DylanBogusz Its currently called the ECO, AHD was the original name which is the HDzero version

@DylanBogusz 5 ай бұрын

@@NickBurnsFPV Ahh I see, thanks for explaining. The HDZero version is the version I'm waiting for.

@BreeZieDoesiT 5 ай бұрын

Same. Any idea where Nick. Are we supposed to go on Alibaba to find it or will it be up for sale on getfpv?

@MCsCreations 5 ай бұрын

Thanks a bunch for all the info, Nick! 😃 You know... I'm starting to think about building a whoop... It wouldn't be soon either way and I want to get an rc truck first (it's going to be the Scy 16103 Pro, the "Gantry Pro"... To run on the beach near me 😬)... But I don't know, we shall see. Anyway, stay safe there with your family! 🖖😊

@NickBurnsFPV 5 ай бұрын

Going to FPV the truck? Could be cool to have a light camera pointed out back and get all that beach sand flying up off the tires.

@MCsCreations 5 ай бұрын

@NickBurnsFPV I definitely want to! I'm building a FPV pod with a Rush Mini and a Caddx Turtle v2... But yeah, a small camera on the back could definitely be fun! 😃

@ProjectMockingbird 5 ай бұрын

Dang, come here for the awesome content, and then I see that QUALITY hat! ;).

@NickBurnsFPV 5 ай бұрын

100% still repping

@modquad18 5 ай бұрын

Hmm, the startup pwr being maxed out of the box is a little concerning for 7mm motors. Think I’ll hold off and see how things shake out once people start receiving production versions. Thanks NB 👍🏽

@Tokyo_Dom 5 ай бұрын

Maxing out startup power on 0802 and 0702 motors has been the recommendation for a while now, not surprising manufacturers are taking it on board

@PeighUpFPV 5 ай бұрын

My mob7 does the same thing on BlueJay

@superhappyfun.1 4 ай бұрын

What is your favorite 75mm off-the-shelf whoop?

@NickBurnsFPV 4 ай бұрын

Likely the mobula7, or the fractal75

@SHess65 5 ай бұрын

Great job, as always.

@NickBurnsFPV 5 ай бұрын

Thank you

@zdeneklonsing 4 ай бұрын

Hey Mr Burns, may I ask you for some help? I flew my Mobula6 '24 and everything was fine. I changed the lipo and suddenly I had no picture in my goggles. I opened Betaflight and got a message (something abaut settings and apply - I can't remember exactly). I pushed one of the two buttons and betaflight was "empty". I downloaded and tried two cli dumps from the Happymodel website and was 90% successful. Everthing works - but the PID-tunes are still lost. The PID-tab shows a warning, that it can cause runaways and motor damage if i will fly like that. Do you - or does anyone has the correct CLI-dump (Mobula 6 elrs v3.0 / BF 4.4.0) for me? I would be really grateful to you. Cheers Stan

@NickBurnsFPV 4 ай бұрын

This is the PID profile section from the mob6 I have. set dterm_lpf1_dyn_min_hz = 90 set dterm_lpf1_dyn_max_hz = 180 set dterm_lpf1_static_hz = 90 set dterm_lpf2_static_hz = 180 set p_pitch = 59 set i_pitch = 100 set d_pitch = 43 set f_pitch = 137 set p_roll = 56 set i_roll = 95 set d_roll = 42 set f_roll = 132 set p_yaw = 56 set i_yaw = 95 set f_yaw = 132 set d_min_roll = 31 set d_min_pitch = 32 set simplified_master_multiplier = 105 set simplified_i_gain = 95 set simplified_pi_gain = 120 set simplified_feedforward_gain = 105 set simplified_pitch_d_gain = 90 set simplified_dterm_filter_multiplier = 120 don't forget to type save and hit the enter key.

@zdeneklonsing 4 ай бұрын

@@NickBurnsFPV Wow, thank you very much. I really appreciate that 🙏.

@andrewtaylor5103 2 ай бұрын

In Betaflight Motors tab do you have the MOTOR_STOP setting enabled? My mob6 had it disabled by default. Discovered this when I disabled permanent air mode, I armed for the first time and the motors didn't start. So it could be related to whatever controls air mode

@NickBurnsFPV 2 ай бұрын

No, motor_stop is not on.

@andreswart4951 5 ай бұрын

Check the bearing of the motor

@omu_fpv 5 ай бұрын

Love your hat!!!

@akirafpv 5 ай бұрын

Awesome review Nick! Appreaciate the hard work and the great advices. I ordered from ali 1 week ago, and It already shipped. I mainly fly 75, so my idea is to fly this bnf until something breaks, then make the conversión to a 75 frame. I am really curious to check how this new FC works in that frame

@NickBurnsFPV 5 ай бұрын

If you don't mind what site did you order from?

@BestBuyBoxes 5 ай бұрын

@@NickBurnsFPV wondering the site, too. Because happymodel told us the delivery time will be end of March or earlier of April

@NickBurnsFPV 5 ай бұрын

@@BestBuyBoxes Yes, I was told late March for resellers.

@aivan_fpv987 5 ай бұрын

Mobula6 2024 vs Meteor 65 pro which is better for indoor flying..😮

@NickBurnsFPV 5 ай бұрын

The meteor65 pro has the 35mm props. That makes it able to produce more thrust and if we can handle that increase it would be more capable of faster more aggressive flights, but the flights will be shorter than the mobula 6 2024. The Meteor65 pro will also weight more, so that could mean greater impacts with the additional weight and thrust which could ultimately compromise durability. So with all that. I think if one just wants the most aggressive indoor flight the meteor65 pro would be the choice, if we are willing to sacrifice flight time and potentially durability.

@aivan_fpv987 5 ай бұрын

@@NickBurnsFPV Great thanks for your advice. I made a Racegow2 track, so I needed a controlable Tiny Hoop. I already have a Meteor 75 Pro, but this is so strong that it's hard to control

@NickBurnsFPV 5 ай бұрын

@@aivan_fpv987 the smaller prop will be likely the better way. More control with less sensitive throttle/stick management.

@basil7257 4 ай бұрын

subscribed, you rock !

@DiraPictures 5 ай бұрын

Hey thanks for the update. I i heart that they planning a version with motor connectors?

@NickBurnsFPV 5 ай бұрын

I am not sure. The HD version does have plugs, but I don't see how the analog AIO can have connectors, at least like we have been using.

@DiraPictures 5 ай бұрын

@@NickBurnsFPV i thought i heart it in one of ciottis last videos

@NickBurnsFPV 5 ай бұрын

@@DiraPictures The analog contact points are pretty spread out making the normal motor connectors not compatible. but maybe they have identified another connector that could be used.

@DiraPictures 5 ай бұрын

@@NickBurnsFPV man i want to comment links to the Site of happymodel where they mention a second version of the AIO with motorplugs. But KZfaq blocks my comments. So obviosly there will be a second version.

@kurtzFPV 2 ай бұрын

Hey Nick. I know this video has been out for a bit, but I'm guessing you still check comments. I have 2 mob6 2024s- one has the bmi gyro and one has the icm gyro. All the settings are identical except for board orientation and gyro pid loop frequency that they each require. I am using the betafpv folded batteries 300mah and have been flying the same racegow course over and over the past few days. I'm not a fast racer but am improving consistency. The mob6 with the icm gyro consistently gives me right at 5 minutes flight time and the one with the bmi consistently gives 4 minutes. Have you ever run into something like this before? 1 minute difference seems pretty significant with all else being equal. I was just interested in your thoughts.

@kurtzFPV 2 ай бұрын

By the way- both are updated to BF 4.5 and both fly great. Other than the difference in flight time, I can't tell which one I'm flying.

@NickBurnsFPV 2 ай бұрын

There can be some general efficiency different even with the same components. It could also be the filters and pids should be different to increase the efficiency. I can't say with any certainty what is going on with this case, but I would lean towards filter and pid that were created for one gyro and used on the other that isn't as efficient.

@kurtzFPV 2 ай бұрын

@@NickBurnsFPV thanks. Appreciate the quick reply.

@ming_fpv 5 ай бұрын

The chip shortage may be the VTX. The OVX300 is no longer available. And BetaFPV M03 is just took down from China Taobao today for same reason.

@NickBurnsFPV 5 ай бұрын

that could be. I just don't have specifics on the potential impact.

@levelonedrone242 5 ай бұрын

Mobulas fly nice but the cameras are always the first to break. I have 3 mob7hd all with broken cams. So I took out the onboard DVR swapped for a Caddx nano and back in the air.

@NickBurnsFPV 5 ай бұрын

The "HD" recording cameras are so much bigger and fragile than the traditional analog cams.

@levelonedrone242 5 ай бұрын

@@NickBurnsFPV yes... yes they are. I love the idea of hd recording on a tinywhoop but if the cam breaks after the slightest bump or crash its not worth it. Crashes are inevitable.

@tonymorgan328 5 ай бұрын

Yeah, brand new mobula 8. Camera quit on second flight, no crash

@levelonedrone242 5 ай бұрын

@@tonymorgan328 geesh even more fragile than I expected thats just crazy... happymodel has to work on its camera system. No cam no FPV for now i just switched over to Betafpv no HD recording but I had enough of the mobula broken cams just wanna fly and have fun without worry

@andreastornesel8404 5 ай бұрын

As allways best flying and technical info. Was it the HQ Ultralight prop you were running?

@NickBurnsFPV 5 ай бұрын

in this video yet.

@andreastornesel8404 5 ай бұрын

@@NickBurnsFPV I think you mentioned HQ light, I purchased HQ ultralight. I Hope I did't mess up.

@Dorff_Meister 5 ай бұрын

I'm waiting for them to show up is US fpv stores.

@NickBurnsFPV 5 ай бұрын

It has been reported they will "likely" show up to US resellers around the 25th.

@CaptainC6969 5 ай бұрын

Hey Nick! Thinking about getting a 75mm tinywhoop. Do you prefer the 1s or 2s versions of the 75mm? Thanks in advance!

@NickBurnsFPV 5 ай бұрын

I think current generation of 1s 75mm are very good. 2s introduces more weight and decreases durability, but they do fly more aggressively. For inside only 1s is the way

@CaptainC6969 5 ай бұрын

@@NickBurnsFPV thank you!!!!!

@KidCe. 5 ай бұрын

i recommend my current setup, sooo powerfull for a 75mm, id say id feels almost like 2s: meteor75 air frame fc of your chioce ex0802 25000kv motors 1610 bi blade props ant lite camera with mcStinky 3d printed canopy and depending on your fc choice, if it has a vtx or not, an extra vtx like tbs unify pro32 nano. on 300mahs tattus i get about 3½-4 minutes of agressive indoor flying (in my super tiny room) and 2:45 in racing in a hall. 300mahs make it soo damn light the power really shines. with 450mah betafpv lava i get around 5 minutes of flight, but you can really feel the extra weight

@NickBurnsFPV 5 ай бұрын

@@CaptainC6969 Sure, my pleasure.

@JakeFPV. 5 ай бұрын

Hey there nick!

@NickBurnsFPV 5 ай бұрын

Hello. How are you?

@NOT_ANOTHER_FPV 5 ай бұрын

Time to crash test so the newbs can see how well it will hold up? From one Nick to another...we need more videos showing how well they hold up to the average flier.

@NickBurnsFPV 5 ай бұрын

Oh boy do I have a lot of crashes. I could put together a no audio crash reel, it would likely be exhaustive but could help others feel more at ease.

@juneloko619 5 ай бұрын

I actually paid 135 from makerfire

@nightfpv4652 5 ай бұрын

Norway/ Sweden / scandinavia has the RF power meter.

@nightfpv4652 5 ай бұрын

I cant link the product. Sorry

@NickBurnsFPV 5 ай бұрын

Yea KZfaq thinks all submitted links are spam 🤷🏻‍♂️. Is it the red one or the white?

@nightfpv4652 5 ай бұрын

Immersion RF Power Meter V2. The white one.

@nightfpv4652 5 ай бұрын

At Elefun dot SE or NO😅

@spoonky7243 5 ай бұрын

Hi I'm a beginner and I just ordered this drone. do you think I should send it back and get another?? or do you think overall this is a good tinywhoop

@NickBurnsFPV 5 ай бұрын

I think this will serve you well. It has been very durable. The camera angle can be adjusted to help keep us from going to fast. Lower camera angle less natural speed

@scole901 5 ай бұрын

i wonder if happy model weill release a 2024 75mm ?

@NickBurnsFPV 5 ай бұрын

I am not sure what new they might bring to a 75mm. If so I wouldn't expect much more than just a refresh with current tech.

@STORMWINDKILLER 5 ай бұрын

what would you say? how does the new mobula6 compare to the mobula7 1s? i cannot decide 😩

@NickBurnsFPV 5 ай бұрын

Its a bit of a complicated response. I lean towards the mobula7, but my indoor space is pretty large and well laid out for my flight style. I think if the space is smaller 65mm is easier to handle in those tighter spaces.

@hubba002123 5 ай бұрын

Which is your favorite 75mm whoop to fly?

@NickBurnsFPV 5 ай бұрын

mobula 7 1s

@Braincho 5 ай бұрын

Another question off topic if please: I got Firefly 1.6DC and a friend plugged battery for a second reversed polarity. Slight smoke appeared. Then one of the motors start slight shake, but no spin, then another motor did the same. In ESC-configurator when I give more power(where you test motors and directions) they did spin(I guess motors are fine), but then they didn't spin anymore, but show some life. I tried to reflash the firmware - didn't help. (by the way what is best option for firmware to flash on this drone, cuz there are many options?). The other motors spin fine and react properly to throttle, VTX and controller RX are working fine. Would it be ESC burned out? Or maybe something else? What would be steps to fix it? Could you give me some suggestions pls? Please help me get in the air. Thanks!

@NickBurnsFPV 5 ай бұрын

smoke is always an indicator of damage. If anything doesn't work 100% then its damaged. There isn't a software fix for physical damage.

@BreeZieDoesiT 5 ай бұрын

Any idea when the HDZ M6 will be released by happy?

@NickBurnsFPV 5 ай бұрын

Should be any day now. But I don't know with certainty.

@yamadagame1803 5 ай бұрын

hey from reunion island

@christianstacker8121 3 ай бұрын

Love your vids. I tried the Karate tune on my mob 6 2024 and it power cycled right after take off. Do you know why?

@NickBurnsFPV 3 ай бұрын

That is very unusual behavior, and so rare I have to wonder if there was something that was damaged, or a crash prior to switching over to the karate tune.

@christianstacker8121 3 ай бұрын

So when I reloaded the factory PIIDS, it was fine. Well sluggish but as it was.

@NickBurnsFPV 3 ай бұрын

@@christianstacker8121 Interesting...I wonder if the karate tune was updated to betaflight 4.5 making it not safe for older versions of betaflight. Just a wondering.

@nickrich710 5 ай бұрын

Cool

@user-qx7yu8lp2s 5 ай бұрын

just out of curiosity do you have any videos of geprc rocket?

@NickBurnsFPV 5 ай бұрын

I don't see anything when I search for rocket. That would have been a few years ago.

@playmatee1 5 ай бұрын

always first start focusing the camera first, are they the same focus ?

@playmatee1 5 ай бұрын

can or did u make a simple rate explanation to pid in case the mob 6 2024 and or new drones are up coming but how much do they improve and are these whoops sufficient enough?

@playmatee1 5 ай бұрын

2 top tier reviews , keep us atttached range test lens heat battery kind balance fort the race

@scu-dub 5 ай бұрын

Hey nick can you put some fire under "tiny whoop's" butt to stock those prop poppers😂 awesome flight I'm a lil disappointed in the new mob 6 I kinda feel like they came out with it too fast just to appease the "whoop gods" 😁

@NickBurnsFPV 5 ай бұрын

I think they are waiting for the maker, which could be "a guy". They did have a big batch of the new prop remover...I think its called the clone. Its much more expensive.

@scu-dub 5 ай бұрын

@NickBurnsFPV oh lol I need one desperately lol I don't have finger nails so I'm flying my mob 7 and it sounds like a locust 🤣

@NickBurnsFPV 5 ай бұрын

@@scu-dub oh sheesh. I see they changed the name to the new prop popper to clone popper deluxe, its $$ but its here www.tinywhoop.com/collections/props/products/clone-popper-deluxe

@scu-dub 5 ай бұрын

@NickBurnsFPV Thanks so much nick!!!! They would be outta my favorite color blue 🤣 they definitely went way up on price but this is a must have thanks again ✌🏼

@NickBurnsFPV 5 ай бұрын

@@scu-dub lol, blue was what I bought :) But its a really really dark blue, so not my favorite blue either.

@mohamedmetwally1436 5 ай бұрын

Hi Nick, did you find out what’s wrong with that motor not starting after crash? I have the same problem on my original analog Mobula6. I believe I do have Bluejay installed as well.

@NickBurnsFPV 5 ай бұрын

No, it continues to fly, the motor just doesn't always start up cleanly. Normally in that case I would increase bluejay startup power, but this is already set to the max.

@kurtzFPV 4 ай бұрын

If you have modes on a switch, sometimes you can get it to spin up in stability mode, then switch back to acro and take off.

@NickBurnsFPV 4 ай бұрын

@@kurtzFPV ah that is interesting I will have to give that a try.

@johnkurpiewski3996 5 ай бұрын

And some people say reviews are dead

@NickBurnsFPV 5 ай бұрын

I have heard that, but not sure if that is just funning around or serious and don't know the sources. :)

@im_ricebowl 5 ай бұрын

actually just ordered this a few hours ago! wanted to get this thing just to use as spare parts and to use the aio for my Hachidorii V2 75mm Frame but i might end up keeping it as it is. oddly enough the place I ordered listed it at around 110 dollars. also not sure if this will help but increasing dynamic idle may help with motors spin up when arming

@NickBurnsFPV 5 ай бұрын

Where did you order from?

@im_ricebowl 5 ай бұрын

@@NickBurnsFPV whoa I sent a link but I think yt removed it...its from Shopee PH

@NickBurnsFPV 5 ай бұрын

@@im_ricebowl yea, youtube thinks all comments with links are spam. Thank you for the follow up

@jermadjesty 5 ай бұрын

Where'd you get the project mockingbird hat?? ❤

@NickBurnsFPV 5 ай бұрын

Its here but out of stock :( props-clothing.creator-spring.com/listing/pmb-element-hat?product=763 PJC hasn't been very fpv actively lately

@ProjectMockingbird 5 ай бұрын

@@NickBurnsFPV oh dang, I didn't know the hat got turned off! I'll fix that...and yeah, with Emuflight kind of trailing off, and not really loving the direction of Betaflight for Whoops, I haven't really felt the desire to fight against it all. One of these days I'll get my 2s 65mm whoop out, which is still the best whoop experience out there...but I digress. :P

@NickBurnsFPV 5 ай бұрын

@@ProjectMockingbird HEY THERE!! You have an internet alert set for PJC or Project MockingBird? Good to hear your still out there doing your thing. Have you tried out quicksilver? Maybe you could combine forces or make presets for that? So good to hear from you. I still fondly recall some of our chats/messages. Last I recall you had made a big move?

@patrickjclarke 5 ай бұрын

@@NickBurnsFPV Yeah, I did a preset for QS awhile back and love the firmware a ton, the lack of support for NBD stuff (I'm still tight with them) makes it hard to do more stuff with them, but with the recent changes in BF that have me scratching my head, and Emu being stagnant, I guess I should do more for QS. My BF tunes run great, but especially for angle racers, it's really hard to recommend it and put my name on a tune/setup.

@patrickjclarke 5 ай бұрын

@@NickBurnsFPV and yeah, up in Oregon now, and most of my spare time is working on the property (we have LOTS of animals now) and hanging out in the woods take up a lot of my time. :P One of these days I'll release the 2s 65mm whoop when everyone realizes high kv 1s 65mm is diminishing returns...haha.