Just for reference, the Armed Armors: HJ - Hyperbeam Javelin BS - Beam Smartgun VN - Vibration Nail DE - Defense Extension XC - Xeno Connect

I'll just combine all HG of Unicorn, Banshee and Phenex... and bam! HG Unicorn Gundam Perfectibility is done

Man, the thing that makes me really appreciate how far this channel has come is the fact the flickering of the LEDs from the lower framerate of your older camera is just gone.

I've had my PG Unicorn for well over 3 years at this point and I've gotta say, I've never run into the problems you describe during the transformation. Other than the waist joint popping off when trying to transform it (which was solved by gripping the upper chest with one hand and the grey section with the other and carefully pulling the parts into place), I've always been able to grip the parts and transform it without issue. I can understand having some trouble with the front skirts at first, but you have 2 options; first is that the small arm that holds the moving pieces onto the front of the armor protrude out the back, if you pushed it forward from behind, they'll pop out (though this may not be possible with the LEDs attached), the second is that you can pull down the tab on the bottom of the skirt armor (that are used for the Unchained mode) to get better access to the edges of those parts.

When you started talking about the wiring, I started wincing as I remembered my own experience with them. It was such an unbelievable hassle to get them to go into the grooves and stay there. Thank god my mum was willing to help me out with them, or my kit would've never been finished.

This is an amazing review as always! I'm expecting my PG Perfectibility by November this year to go alongside my regular PG Unicorn! Can't waittttt Also Mecha, I've built 2 MGEX Unicorns now and I've discovered that one of them have the same problem as you do, where the LED fails to light up. I've discovered that the reason might be the connecting port that goes into the butt that powers the LED strips. If you haven't already, check if it is connected properly into the butt and try to replace the batteries while you're at it. Keep experimenting around with the "Buttplug" and it should light up again. I hope this helps lol (Pls like this comment guys so Mecha can see it and hopefully fix his MGEX unicorn's issue)

The base gundam, PG Unicorn will always have a special place in my heart. That excitement. The first toy where I actually saved up for.

Well done! I can only imagine how tiring it was to make this. Would've been nice to see the Divinity set attached. Have a well earned rest. Nice to see Spooky is well too.

I think you should've used the kosmos led phenex version so that the two shields should have leds as well just to complete the look of it

One thing I’ve never experienced is having a Gundam buying experience, seeing a full size Mobile Suit and having a selection. I’ve put tiny waterside decals on an RG tho 🤣. Excellent review!!!

It's nice to see spooky nice and well after all that happened, he's a great dog and a best friend. Your lucky mecha

I've never done water slides until the mg Wing Zero and Epyon so I looked up how to apply water slide decals and most of the videos I watched said to dip them in to lukewarm water for 30 to 35 seconds then use qutips to move the decal from the sheet onto the kit and it worked well for me.

For RGB leds, GET THE KOSMOS ONES they are thinner, so it's easier to put them where they go, and they are pretty strong.

I don't have the PG banshee but i think the armed BS(beam smartgun) can also slide to reveal the psychoframe color at the tip and the HJ i think stands for Hyperbeam Javelin

11:17 finally a face Edit : i really like when the reviewer is showing the transformation process instead of "here it guys the kit in transformed mode".

They always find a way to release a more ridiculously good Unicorn model kit. I thought the MGEX was their final best Unicorn.

the way u transform those kits gives me heart attack :')

I have the HG of this kit, and there was so much plastic. And that kit doesn't even transform. The PG looks outstanding.

The reason you were left with a matte finish on the part after using the GunPrimer balancers is because they are each two stage. For the White one, you use the underside (green?) to prepare the surface then flip it over to use the actual white side (with the logo) to buff to a gloss finish. So the full process with both would be: Grey Underside -> Grey Topside -> White Underside -> White Topside.

On the last New Year celebration I bought a PG RX-78-2. Like it a lot, but honestly think that he will be my first and only that big and expensive Gundam. …Well, today my wife bought me this amazing Perfectibility set with Divinity Expansion kit on our anniversary. I think I just can’t be happier then I already am 😅

I really wanna see Bandai make PGs of a lot of the Wing MS. Like the gundams, Tallgeese, Epyon. That be badass.

always thumbs up for your reviews 😁

Ive been getting into gunpla and this is literally the first ive heard you have to soak the decals 😅😅 that explains soooo much

This is on my dream kit list now.

Really loved the review, awesome work as always ❤️ Btw, could you do a video update series of sort? Like, to comment about some of the kits, how they have degrade or mantained their initial feel, like with the mgex unicorn, because, if not, there's a lot of people that would never know about that, I really think it would be nice for the community

Kinda interesting to hear you give the PG Exia a bit of shit after a few years, considering it was “perfect” back then. Maybe I’m biased because it’s the only PG I’ve built to date, but I still think it’s an excellent kit, especially with some 3rd party LEDs.

This is the first gundam kit i have ever built... and i regret it .... because all other kits seems so simple and easy to build in comparison

amazing review! thx. haha when you started talking about the "bad" wiring experience I just had to laugh, because I was doing exactly the same and building both legs with LEDs of the normal PG Unicorn just literally 2 days ago 🤣

My wife just ordered this kit for me. I'm excited about the build

I'd like to add that I also Clear gloss coat, apply water slides, then top coat in desired finish clear coat. that way decals never get messed up

100% agree with the LED criticisms. I had an easier time with the MGEX than this. I absolutely love this kit though! it is magnificent. I was so excited to see you reviewing this kit!

SHEER BLACK MAGIC IS RIGHT!! 6:05 I’m currently building my first RG God Gundam and let me tell you something… taking a lot of breaks, been two days and I only did the torso and legs 😀

Wait? PG Unicorn is already 8 years old? .... Where did those years go.

It looks gorgeous, ive build the PG unicorn (Rx-0) and i agree building the kit after airbrushing felt like the bane of my existence. Compared to a MG ver ka. Also you should've tried 3rd party leds(Kosmos Led unit) , its way brighter, usb powered and a remote for less money

Armed Armor BS is Beam Smartgun Armed Armor HJ is Hyper Javelin

Also you know this thing costs an arm, and probably a leg, just from the box it comes in!

Wasn't quite sold on the divine expansion as it looks like its just the FA expansion for the normal release unicorn, but renamed. I also have to agree that the wiring is the more annoying part of the build, but once you've done it once or twice you kinda get used to it. Absolutely love the unicorn kits and have been waiting for my perfectibility for 5 months, so hoping it will come soon.

I just got my PG Unicorn about a week ago and I'm very happy with the build despite having to wire the LEDs being a bit of a pain in the neck

I have perfect grades of the OG unicorn, the Final battle unicorn, the final battle Banshee and the original first release phenex… how dare you make we want to build the same god damn kit for a fifth time

I just watched the short about this a minute ago then this comes out after, what a luck I have

I’ve never really liked the unicorn MS and it’s variants but this is indeed impressive.

Finally, a unicorn perfectibility that is good

The mgex is a bit funky and it seems like the lights burn out but you just need to switch it on and off again a few times

I dunno if it’s the same issue with your MGEX, but when mine wasn’t lighting up, I found that using a different type and brand of battery fixed my issue

Awesome review as always. Also, glad to see Spooky is doing well.

1:52 Mecha confirmed Potemkin main, recognize that F.D.B pose anywhere!

I was quite bitter when this came out because I just splurged on the PG Phenex Narrative Ver. But now I'm just excited to build mine. I already had the LED because I found one on sale on my local hobby store for like half srp so I just bought it even though I don't have the kit for it yet. But I'm thinking of using the Kosmos LED since they have the one for the Armed Armor DE's now. --The BS stands for Beam Smart Rifle iIrc.

Oh... that explains why I was having so much trouble with the decals on my Wing Zero Ver Ka. Glad I have almost an entire extra decal sheet in case any of the others fall off!

When I finally get around to it, this will probably be the only version of the Unicorn I’d like to own

One thing about the Unicorn LED unit if anyone is interested: These self destruct over time. (at least the official ones) I modded my Banshee and Phenex with an Arduino that is shorting the button contacts of the LED control box every X minutes and hooked everything up to a seperate power supply. I like my Gundams when they illuminate the room 24/7 However: The unicorn LED Units use UV LEDs to utalize the fluorecent inner frame of the Gundams. Here is the problem tho (what I found out the hard way: The epoxy on top of the LEDs that protects the chip itself is.. well.. not UV resistent and is starting to become brown over time, effectively swallowing all of the light from the LEDs. So.. yeah.. UV LEDs that destroy themselves. If you try to remove the epoxy from the LEDs (either by sanding, pulling, twisting, etc.) you are more than likely to annihilate the LED chip itself, so that's unfortunately not an option. I've tried out multiple different SMD UV LEDs, however almost all LEDs out there in this formfactor suffer from the same Problem. The Solution would be to use regular white LEDs, these illuminate the inner frame pretty good. With a little bit of soldering the LED units can be fixed via a simple drop-in replacement.

This will be team Blue to display with Bael and Transient gundams. 🤩

Got mine pre-ordered the other day...should be dope. Hope your dogs doing good.

Ugh this is one PG I wanna build like really bad man. Goddamnit P-Bandai

Wow, no wonder my waterslides were so unstable! I was soaking em for like a minute

Dude, everything about this kit is, by every meaning of the word, perfect. 😇😁

The Armed Armor names are BS = Beam Smart gun VN = Vibro Nail DE = Defense Extension XC = Xeno-Connect HJ = Hyper Javelin

Noob here, most Gundam are too simplistic and not my taste but this I like.

3:37 unboxing 5:43 build 16:35 aesthetics part one 23:23 aesthetics part two 31:19 accessories 35:34 final verdict and outro

While I do love Gunpla, I don't like posing and transforming them. So all my PG Unicorns are permanently in destroy mode and just standing straight. Like how I imagine they'd be stored irl. They look AWESOME. Already have the original, banshee, and phenex. LEDs included. Looking forward to buying the final battle version and perfectability.

They are LEDs after all, turning them on and off repeatedly will damage them and after a certain number of cycles they will break. It is their nature. Quick cycling will speed up this process

i used clear blue for the armed armor claw. i have yet to work on the backpack tho. hopefully there's no needed parts from the metallic blue except for the mane thingy

Basically the best 1/60 PG variant ever tho, and it's way too awesome and has Blue Psychoframe just like Phenex does... I bet it's hard to choose between RG Hi-Nu or PG Unicorn for the big boys (Don't do "Por que no los dos?" meme, We all defo will!). Bandai Spirits are WAAAAY blowing everyone's pockets with ease now, and I'm so glad they're committed as always. It's a fine work like always for them! PS: Ey yo, Spooky~ glad to see you're okay ^^

9/10 for the video, 10/10 for the dogs 🐶

Hi mecha gai I just want to thank you for inpiring me to collect gunpla's I have been watching your channel way back then with out subscribing. But thank you for the inspiration

Can't imagine if Bandai make MG EX unicorn perfectability.. Or they just make the PG EX of it

Mecha going to FINALLY start using waterslides!.. If you ever want to offload any of the hundreds of sets you have, I would buy!

That feeling when a review video captures you, and pulls you in. I was soo focused on this review lol the way you captured the kit was amazing 10/10

So this is why I haven't really seen a serious review from you for a bit. That makes sense.

Just imagine if this go the Perfect Grade unleashed treatment, damn wallet gonna be aching

there are two paths the PG line could be following right now: -Bandai is putting the most work they ever have into a gunpla kit and the next PG release becomes the best Gundam of all time -The PG line is dead and I never got a single PG while they were in production

Perfect gundam kit 😍 Perfectibility review as always Gaikotsu 👍🏻♥️ Keep it up 💯💪🏻

i build the PG Full Armor Unicorn and i agree the Transformation is really annoying especially the Torso and Waist part. some of the small bit often came off. and the stand support of the Fuel tank didn't fully design to support it and with the heavy Back + loose Knee is hardly stand and often fall.

Idk if im wrong but tbh the best pg gundam is literally the perfect grade astray red frame

VN-Vibrating Nail BS-Beam Smartgun XC-Xeno-Connect(the back mane, used for jamming targeting systems) DE- a big honkin shiDEld or something

Rated PG for everyone 🌟

When you plopped the box down my first thought was " I wouldn't even want to open it"

I want this kit so bad. This is ny favorite version on the unicorn gundam.

i hope i dont get flamed for this, but does anybody else not put on the decals because they arent actually on the gundams in the anime?

3:33 DOGGOS! 22:55 Hi Spooky!

Btw the Armed Armor BS stands for Beam Smartgun and Armed Armor HJ stands for Hyper beam Javelin

Im drooling like hell here. Thanks for reviewing this beast mecha

Can you make a review on Hg unicorn gundam perfectibility to complete all unicorn perfectibility grades.

30:57 BS stands for Beam Smart like the one from the S, EX-S, and big gun

Did you know that you could actually place the hyper beam javelin around the XC units when in unicorn mode? It sits there just like in the animation, just have to change the orientation of the connector in the middle so that the peg/nub faces down

The whole thing with decals really applies only to bandais decals. I really don’t like bandais brand of decals. My favorites are SIMP, DL Decal, and Delpi Decal. Those three are top tier

My guess for the decals not having writing was they just scaled up the existing decals on to a new sheet

17:10 your cown jewel will always be the Neo Zeong until you have something to top that

My mgex LEDs still work, and I never had the pull apart problem with transforming my original pg unicorn armed armor bs is beam smart gun and hj is hyper beam javelin btw

I only came here for the gunplay but the doggos distract me haha

11:18 face reveal ❤ dude looks so young haha

It’s ridiculous that in 12 years only got 2 brand new PGs.

I'm assuming your issue with the MGEX is that the entire kit lights up, but after a couple of seconds the eyes go out while everything else is still on. I fixed the issue by just swapping out the batteries, but I'm not sure if that will work for you as I'm not 100% sure what ur issue is.

okay, I'm forced to assume that the blue phycoframe it a by-product of having to of those shields. don't know how, but it's all I've got.

Perfectibility = dakka Perfectibility Divine = extra dakka

It's Armed armor HJ (Hyper Javelin)

my dad just said if i get straight a's this school year he'll get me one. challenge accepted.

It is when you make it the Divine!

Said i need to look for it and i Just bought it from buyee😅😅 thanks mecha

The BS is for Beam Smart and the HJ is for Hyper Javelin

I will buy this as a gift for myself on my Birthday