The Haworth Fern is Now PERFECT With This Headrest!
Рет қаралды 47,179
Күн бұрынI LOVE the Haworth Fern, but the Haworth Fern's headrest was SO bad, that it made this chair a dealbreaker for many....until now! Let's get Ahnest!
=============================
🛒 Products from Video - Using my links helps this channel a LOT!!!
*Affiliate links cost you nothing, but gives me a small commission which keeps this channel going!
=============================
Atlas Headrest
🛒Haworth Fern Adapter: atlasheadrest.com/products/he...
Use code "AHNTOURAGE" for $5 off!
Haworth USA/CA
Digital Knit is my favorite back on any chair!
🛒Fern Digital Knit (USA/CA): haworth.pxf.io/Qyngnx
🛒Other Haworth Fern Options: haworth.pxf.io/jWoR75
Haworth International (via Amazon)
🛒Haworth Fern (Amazon): geni.us/lV2jzgi
============================
In The Background
============================
Wall Slats
🛒USA/Canada: www.thewoodveneerhub.com/stay...
^Use link+code "STAYAHNEST" for 10% off
🛒United Kingdom: www.thewoodveneerhub.co.uk/ST...
^Use link+code "STAYAHNEST" for 10% off
🛒Europe: www.acupanel.com/STAYAHNEST
^Use link+code "STAYAHNEST" for 10% off
=============================
📱 Follow Me!
=============================
Subscribe 👍 - kzfaq.info?sub_conf...
Instagram - / stayahnest
Twitter - / stayahnest
My Other KZfaq Channel - / theblindguys
=============================
💼 Business Inquiries/Sponsorships
=============================
Email me: Ahntouragemedia@gmail.com
============================
❤️Want to Donate?
============================
👍www.paypal.me/ahnestly
=============================
📼 Relevant Videos/Playlists
=============================
📼ULTIMATE Chair Buying Guide (2022): • The ULTIMATE Chair Buy...
📼My Top Chair Picks ($200-$900): • Ahnestly's Top Chair P...
📼My Top Chair Picks ($900+): • Ahnestly's Top Chair P...
My Other Channel (Blind Reviews):
📼 Blind Chair Review Pt. 1: 7 Chairs (HM, Secret Lab, Autonomous): • Blind Test: 7 Chairs. ...
📼 Blind Chair Review Pt. 2 13 Chairs (HM, Steelcase): • Blind Testing 13 Chair...
=============================
Table of Contents:
=============================
0:00 - Haworth Fern's terrible headrest
0:37 - Atlas Headrest to the rescue
1:09 - Do you lose any functionality?
2:38 - Height limits
3:40 - Functionality + adjustments
5:20 - Installation Tips
6:25 - What about the fabric?
6:51 - Your feedback + coupon code!
@Ahnestly 11 ай бұрын
@adamuniverse7712 was the one who came up with the idea and partnered with Atlas Headrest to get it out to the masses! Please post your feedback if you got one!! Haworth Fern + Headrest Links below! Please consider using them as it helps this channel a LOT! *Atlas Headrest* 🛒Haworth Fern Adapter: atlasheadrest.com/products/headrest-for-haworth-fern-chair *Use code "AHNTOURAGE" for $5 off!* *Haworth USA/CA* *Digital Knit is my favorite back on any chair!* 🛒Fern Digital Knit (USA/CA): haworth.pxf.io/Qyngnx 🛒Other Haworth Fern Options: haworth.pxf.io/jWoR75 *Haworth International (via Amazon)* 🛒Haworth Fern (Amazon): geni.us/lV2jzgi ====In The Background==== *Wall Slats* 🛒USA/Canada: www.thewoodveneerhub.com/stayahnest ^Use link+code "STAYAHNEST" for 10% off 🛒United Kingdom: www.thewoodveneerhub.co.uk/STAYAHNEST ^Use link+code "STAYAHNEST" for 10% off 🛒Europe: www.acupanel.com/STAYAHNEST ^Use link+code "STAYAHNEST" for 10% off
@RS-ef2ow Ай бұрын
Picked this up with your code - very satisfied.
@DavidLongo22 3 ай бұрын
Mine finally shipped. NOW I'm psyched! I've been using a pool-noodle type for 15-16 months.
@nbkedd 11 ай бұрын
Ayo I sparked this idea by frankenstiening the original Atlas to a Fern :)
@Ahnestly 11 ай бұрын
Adam!!! Sorry man, I was in such a rush to get this out bc i loved it so much, I forgot to mention your name!!! Dude…you nailed it with this one!!!!
@Nersius 11 ай бұрын
Hope you make a 3 or 6 month follow-up on this. Looks fantastic, just worried about the clamps/adapter damaging the materials.
@nbkedd 11 ай бұрын
I've had a prototype since last summer & it's held up perfectly great
@Tunnelsnakes 11 ай бұрын
Also 3 to 6 months follow up with the Embody w/ headrest too and compare the two if possible
@BenjiB0P 10 ай бұрын
Mine came today! Installing was pretty straight forward. So much more comfortable than the original headrest. And at 6'1" i havent had any issues. Makes a great chair even greater!
@xAlbo94 8 ай бұрын
So you bought the adapter, and which headrest? Aeron? Embody? Cushioned? I am confused on that part.
@fudeboii Ай бұрын
How u replace oem headrest?
@nuggets702 9 ай бұрын
I've got a Fern with no headrest, what i do is take a section of pool noodle, slit it the long way and wedge it into the top. Could play with different pool noodle diameters, but the smaller diameter works well. Perfectly supports for me.
@Ahnestly 9 ай бұрын
Haha i like this approach a lot! since the backrest is so tall, I could see this being a pretty good fix!
@ABG1788 3 ай бұрын
what are the dimensions of the noodle, and where did you buy it? And whats the name of it?
@nuggets702 3 ай бұрын
@@ABG1788 in the US, you can just get them from the dollar store. Thick or thin, depends on your preference. I use the thinner ones. Just cut to shape however you want it.
@DavidLongo22 2 ай бұрын
Received, installed, and it's spectacular. I followed your suggestion and installed the headrest to the arm first, and that was a GREAT help (THANK YOU!).
@brandonrussell9383 10 ай бұрын
My Fern arrived today! I LOVE this thing. I might invest in this headrest a little later on. Thanks Dan.
@stephenwebb192 8 ай бұрын
I just got this chair today based on your reviews and now just ordered the head rest attachment! Legend! Thank you!
@Ahnestly 8 ай бұрын
how do you like it!?!?!?!
@stephenwebb192 8 ай бұрын
@@Ahnestly Brilliant thus far! Comfortable with so many options for seating positions which I think is key given the amount of time I spend in a chair! I could only get the base model here in Australia so I got creative with a neck pillow and inserted it into the chair for additional lumbar support in an upside down U shape position! Works extremely well. I heard some complain about the provided lumbar being too hard, so a soft neck pillow has done the trick! Looking forward to the head rest to finish off the chair! Thanks again!
@Svanir.80 11 ай бұрын
!! I've been dying for a good headrest for this chair. This is amazing.
@montgomeryburns8848 3 ай бұрын
Hey just wanted to say thanks for the $5 coupon. Ordered one of these today for my fern. I'm 6'2 and 190 pounds, so I will follow up once it comes in and I can mess around a bit. I bought an embody non gaming chair new from Herman miller directly last year but had to return after the prongs in the lower back were digging into me. After tinkering for two weeks and just having more and more pain and just went with the fern instead. Pretty happy so far.
@curtfont 2 ай бұрын
Thanks brother, this was a very well detailed and well instructed review.
@FreQuese 8 ай бұрын
The algorithm did its thing! I was starting to regret buying my Haworth Fern because I didnt get a headrest - i was just putting a plush blanket and wrapped it around with string as a makeshift cushion since the top part of the chair is kinda hard and i like to slouch a lot. Thank you for this review and insight on this product, definitely going to buying the headrest and adapter right now!
@Ahnestly 8 ай бұрын
woot woot! Make sure to use my code AHNTOURAGE for $5 off the headrest!
@FreQuese 8 ай бұрын
@@Ahnestly already did! thank you for it!!!
@rage0exe 9 ай бұрын
Gonna cop, love to see it!
@jackboxer7537 11 ай бұрын
A reddit post or comment from a month ago said the Atlas headrest with Fern adapter is usable only for users 5'11" and up, but you've shown that shorter people can use it too! I was considering selling my Fern chair, but now I think I will keep it :) Atlas Headrest owes you!
@Ahnestly 11 ай бұрын
Yeah I was planning on calling in my 5'10+ friends in to help with this video because of that, but when I tested it, I was like YOOO IT FITS ME!!!!!
@jackboxer7537 10 ай бұрын
@@Ahnestly I've had my Atlas headrest installed on my Fern for the past week, and it's a real treat! Now I understand why that redditor said 5'11" and up; they meant you need to be 5'11" to experience the FULL range of the headrest. At 5'10", the Fern Atlas headrest at its lowest position is just a smidge higher than the middle of my neck.
@Jaxs3003 6 ай бұрын
Thanks for your videos man! They are informative. Just ordered this Headrest with the Adapter and used your link and code. I have the Fern as well and was looking for good reviews on a headrest. Keep it up!
@Ahnestly 6 ай бұрын
Nice!!! I hope you love it! My friend just got one and he said he loves it
@Jaxs3003 5 ай бұрын
Got it today and it is amazing! Thanks again!
@Winner3ty 11 күн бұрын
I just ordered an atlas headrest for my fern with your code, thanks by the way! I am 5'11 with long legs and fairly short torso, so i will document here how the atlas headrest works for me when I get it.
@innocentrage1 11 ай бұрын
Sweet!!! cant wait to get one
@CorwinYoutube 9 ай бұрын
Thanks for this video, just ordered the headrest and adapter!
@Ahnestly 9 ай бұрын
woot woot! hope you love it!!! let me know!
@CorwinYoutube 8 ай бұрын
@@Ahnestly Received and installed the headrest this morning (black cloth to match the chair; packaged very well). Easy install and love having a headrest on this chair that is functional and comfortable. Thanks again for this video pointing us to this solution. Have a good week!
@RS-ef2ow Ай бұрын
Picked this up with your code - very satisfied.
@Ahnestly Ай бұрын
Nice!!! Glad you love it!!
@Deezy2158 9 ай бұрын
This headrest finally arrived. They are apparently made to order so it takes more time than I would like. Maybe 3 weeks or so. But it's not that serious. As far as the headrest itself, it is great. I am 6'1 and I prefer it almost all the way down so I feel the support on my neck. I appreciate you covering this stuff. I may have never known about it otherwise!
@Ahnestly 9 ай бұрын
Yoooo! I'm so glad you love it! And I'm glad you found it here! Tell your friends about me if they're ever in the market for a chair!!
@xAlbo94 11 ай бұрын
This is clutch, this was the one thing holding me back from picking the fern.
@Ahnestly 11 ай бұрын
woot woot! if you decide to pick up, please consider using my link! Helps the channel a LOT!
@EngWa 11 ай бұрын
Great review dude! On the chair itself, I wish the lumbar support could be removable like the Aeron's to see if if I need it or not, or if a third party company like Atlas made a lumbar support attachment for the Fern. I'm only able to buy the Fern without the lumbar support in my region :(
@ben12405 11 ай бұрын
Damn I picked up a Zody recently, if I knew atlas would release that, I would have gone for the Fern. Maybe Atlas will make a Zody adapter ? 👀
@sngcelebi7040 11 ай бұрын
YES. I thought I saw a wild asus rog destrier ahah, I guess a review will come so. I'm pretty sure my hopes for this chair will be brutally dashed, but YES.
@meat_loves_wasabi Ай бұрын
Just got the Atlas for the Fern… if u need to push the headrest even further back don’t install the capping at the back of the headrest…u will gain a few more mm to push that headrest further back.. made a big difference for me
@dixls 9 ай бұрын
Would love to see a similar adapter that works with the gesture, sure you can get a gesture with a headrest, but being removable and adjustable like the atlas would be so much nicer
@Ahnestly 9 ай бұрын
Love this. I totally agree...I asked Steelcase why the Karman didn't have a headrest (the Karman can't really have one bc the frame is bendy) and even they seemed confused about their approach to headrests!! BUT if you get your hands on one...it's really really good.
@Ahnestly 7 ай бұрын
@@krystion I haven't checked, but it wasn't designed to be used with the Gesture. I'm sure someone out there will be crazy enough to try and figure that out! lol
@blongoFA5 11 ай бұрын
Awesome review. I've been checking the Atlas site weekly for a black cushion headrest for my full black digital knit Fern. It was supposed to maybe be back in stock this month, so fingers crossed any day now. Will be sure to use your code!
@Ahnestly 11 ай бұрын
Thank you!! I hope it comes in!!!
@blongoFA5 11 ай бұрын
@@Ahnestly Just got the email that it's back in stock finally! I ordered and managed to not forget your code! Thank you for all you do!
@Sams911 11 ай бұрын
I recently took delivery of this chair and I LOVE IT... I got the one with the headrest and I frankly like it..
@Ahnestly 11 ай бұрын
REALLY??? Man…I got SO angry with it. Kept rubbing on my head when trying to sit straight. Couldn’t adjust at all. But I guess I’m spoiled with all these headrests I get to test :) Which back did you get??? Digital knit???
@Sams911 11 ай бұрын
@@Ahnestly I got the orange color with the digital nit yes... it's for my Gaming PC... I am of the mindset that a head rest SHOULD touch your head without having to lean back into it.. this is why I loved the Volvos of the 1980's and early 90's back in a time when few brands (Mercedes and maybe BMW) offered a proper headrest and other cars had a useless lump.. I tend to sit forward anyway so I'd have to sit flat against the back to touch it, which again is fine for me.
@Ahnestly 11 ай бұрын
@@Sams911 hahahaha well if you ever want FULL customization on your headrest…consider upgrading. You can have it sit however you want and the plushness is INSANEEEly nice! And digital knit = best back. Every time I sit on it, I’m so shocked at how soft and nice it is on my back
@Sams911 11 ай бұрын
@@Ahnestly I will look into it, thanks for the great reviews btw.
@kasper_429 11 ай бұрын
@@Ahnestly Sorry to hijack this comment section, but I was just curious. Is the digital knit back as breathable as the standard mesh back? I'm looking into getting a Fern, and was just curious in the differences between the 2 options. I'm hopefully going to try them out in the near future, because I finally found a store near me (about 2 hours away) that sells Haworth products.
@joenicklo 10 ай бұрын
The Fern definitely has my attention. I've got about 6 years on my HM Embody now and it's going strong but maybe it's time to shake things up visually.
@Ahnestly 10 ай бұрын
Get a headrest for your Embody! Check out my review!
@autumnknight586 10 ай бұрын
Hi, I just got my Atlas Headrest for the Fern but I don’t know how to install it. Can you do a video step by step installation guide for it. Much appreciated 🥃
@WhatTheJek 5 ай бұрын
Just got mine recently. I'm a little on the shorter side, under 5'6, so what i've done is flip the headrest upside down on the chair and it sits just low enough for me to use comfortably 🙂
@mark.espina 22 күн бұрын
This post gives me hope, as I'm 5'5". When flipped upside down, does it rest in the curvature of your neck or still hits the back of your head?
@saeno7258 2 ай бұрын
I know this is a bit of an older video, so this might be a long shot, but is there any chance you could make a video/tutorial on how to remove the original headrest from a fern that has one? Because I barely find anything on this topic, and the things I did find were almost no help at all. I know how it's bolted on, but I have no Idea how to get to the screws and remove it. I would have gotten one without it, but it was a special offer. Anyway, thanks a bunch for your videos dude, you're the reason I got one in the first place.
@Riokaii 11 ай бұрын
the clamps would be better on the horizontal and vertical of the back cutout, probably needs a tightening knob there to work. Hope if they make a dedicated or update they avoid the fabric entirely.
@Ahnestly 11 ай бұрын
Clamps as in the knobs or you mean how it grips onto the chair? If you’re talking about where it grips, those grips would be a bit low bc the chair back is talllll. You can see how tall in the shot next to the aeron
@85leomustang 11 ай бұрын
I'd love to see you do a review on the other Asus Rog Destrier gaming chair, in the near future, I really liked that chair, but I don't know if it's really ergonomic or just pretty.
@Ahnestly 11 ай бұрын
Stop reading my mind! :-) subscribe and wait 2 weeks
@leondre1508 11 ай бұрын
I contacted them a few weeks ago for one of these and they are backed up pretty hard right now, won't ship until the end of next week at least. Am 6'1" and will update when I get it.
@Ahnestly 11 ай бұрын
Yeah they’re trying to get their embody headrests out and working like crazy. Even getting this out to me took like a month!
@leondre1508 11 ай бұрын
@@Ahnestly Mine showed up early so here are some initial impressions. Installation was easy though I was surprised that there wasn't even a single piece of documentation included. As you mentioned the clamp is tight so I don't see it fraying, but I'll have to keep an eye on it since I have the digital knit version of the chair. I am very impressed with the quality of the headrest itself, first experience with one of theirs. I find it best in the lowest position so it supports the neck, with it tilted upwards a bit. Haven't really felt the need to adjust it any more than that regardless of recline angle.
@R.J.Mathews 11 ай бұрын
Trying to find the digital knit version for UK shipping but there's no option for that. Maybe giving them a nudge for UK / international customers? Thanks for the review
@bleachedwhale 11 ай бұрын
Thanks for this video, especially that part at the end about the grip of the attachment arm onto the back rest. I recently "broke in" a Fern seat with digital knit back, and would kind of hate to ruin the look of an otherwise great looking chair with indents or distressed material, should I choose to remove the headrest.
@Ahnestly 11 ай бұрын
I hear ya, but the headrest is such a game changer. I'm sitting on the one at home right now and miss having it when I'm playing D4!!
@vincentlimja 11 ай бұрын
I don't think I am the only one who is still waiting for a Steelcase Leap V2 adapter or a full headrest from Atlas. Can you hear the people sing?
@ryansnyder2756 11 ай бұрын
YOOOOOOOO This is Awesome.
@Ahnestly 11 ай бұрын
YOOOOOO. You are awesome. ;-)
@hayheejeanaka 28 күн бұрын
I just got a fern and I'm around 5'3" and the top of it hits the back of my head and its kind of hard. I'm considering getting a head rest now and if I get this one I'll update on how it feels!
@slvrization 8 ай бұрын
Fern with Atlas headrest gives the same "complete" chair vibes as an Aeron with one. Also, I was pleasantly surprised that US -> EU delivery took only a few working days, maybe five. The only downside is that the range of motion on Fern is a bit more limited than on an Aeron, but it does not affect the usability anyway.
@Ahnestly 8 ай бұрын
Yeah man it's a game changer! I would always rest my head on the upper lip bc it is soft enough, but not super ideal! Love the way it feels now - just wish the colors matched!!
@slvrization 8 ай бұрын
@@Ahnestlythat's why I decided to go for a full black Fern (with lumbar and metal base tho, not a fast delivery version). Perfect match with a regular black Atlas headrest :)
@Ahnestly 8 ай бұрын
Smart smart move
@MKequilibrium 5 ай бұрын
I've got fern and it's silent when you upgrade the noisy wobbling hand rests. Take them out from the chair base sleeves (you need to push from the bottom) and then insert a small plastic (1,5-2mm thick) in between the sleeves and the arm rest inserts to fill the gap. You can also use a duck tape to tighten the inserts because they are from 2 parts so you could take the arm rests out but since they are not tight the whole arm rests are wobbly and noisy. When you duck tape the two parts together the arms rests are then sturdy and make no noise. If you have lumbar and it starts to make squeaking noises you need to take the fabric down then the front mesh then the lumbar pillow and then you put some vaseline on the metal moving parts of the lumbar. Then you put everything back together and it's like new.
@drizzt8965 5 ай бұрын
Do all of their arm rests wobble like that? That seems like a real flaw for that kind of money...
@Theescapist_87 3 ай бұрын
A $1000+ chair should not have these kinds of issues.
@MKequilibrium 3 ай бұрын
@@drizzt8965I think so. Easy to solve though
@MKequilibrium 3 ай бұрын
@@Theescapist_87well almost all have something wobbly
@drizzt8965 2 ай бұрын
@@MKequilibrium I bought a Herman Miller and absolutely love it! The Embody....
@dougwhite-ty1ny 8 ай бұрын
What can we expect from Haworth for Black Friday sales? They have 20% off right now and I want to buy one but not sure I should wait until Black Friday. i have done that before and the Black Friday price was actually higher. I can't find anything on what they did for Black Friday 2022.
@VeggieLard 11 ай бұрын
Can you recommend a couple of your fav chairs that have a recline locking feature? Can’t find much info on chairs with this feature
@JimSigma 2 ай бұрын
Im 6' 4'' and i just got mine in. It is perfect! honestly I think It would still work for taller folks, as Its not maxxed out at the setting/position I like it at (it has maybe 2 more inches left of height). i think even taller people will have no problem with it! Hope this helps!
@Ahnestly 2 ай бұрын
oh snap! Thanks for the feedback!!
@hjshoon5244 11 ай бұрын
Just ordered using your link and discount code. Thanks. Wanted the black fabric cushion option but not in stock so chose the vegan leather instead. Can’t find real pictures / videos of the vegan leather, hope it matches well with my fern with black mesh
@malcolmharrison28 11 ай бұрын
I did the same, on Thursday, picked 2 day shipping it didn't even ship yet, but I read the leather will break after time so I emailed them to switch it to the black fabric, I also have the black fern not the mesh though the other mesh material
@hjshoon5244 11 ай бұрын
@@malcolmharrison28 they sent me an email one day after I ordered asking me about my Fern’s colour as they wanted to make sure the adapter I chose will be suit it. That’s a nice gesture but ever since I replied in same day and asked to share a real photo of the vegan leather option, they have not gotten back since. I sent a follow up email 3 days later and still radio silence. After reading your reply here, I checked again their website and saw that the Black Fabric option is indeed back in stock. So now I’ve written in again asking them for photo of both vegan leather and black fabric for me to choose. Don’t know when they will revert. Quite disappointing in terms of the turn around time to reply. They must be either a very small company with few staffs or overwhelmed by order backlogs. Btw thanks for letting me know the black fabric option is back available now
@Ahnestly 11 ай бұрын
They’re a small company and priority is the embody headrest, which is heavily backprdered
@mcmickey3344 11 ай бұрын
Do you recommend the limber support and forward filt?
@ecco222 11 ай бұрын
Looks a bit funky. Which might be okay if the color matched.
@BLR1GBattlemaster 10 ай бұрын
Bought a Fern over a year ago, and also a Hyken. My wife and I much prefer the Hyken over the Fern, and part of it is because it has a nice headrest. I'll have to give this a shot, but really regret spending over $900 on an uncomfortable chair. The Hyken just feels better in every way.
@kevinholliday2066 11 ай бұрын
Excellent review! Question though… one of the main features of the Fern is how it flexes and moves with you as you twist and stretch your body throughout the day; does this headrest and (somewhat large) adapter hinder that functionality at all?
@Ahnestly 11 ай бұрын
It does not! The headrest actually flexes with it pretty well bc it sits on the frame outside, not on the entire chair itself. You can kinda see it in one of the b roll shots but I really should have thought of that!
@kevinholliday2066 11 ай бұрын
@@Ahnestly No worries mate, that's why we have a comments section. Haha. Thanks for clarifying. I didn't think it did, but just wanted to make sure. The color-way looks like it blends decently to me, so that's nice. I mean, outside of the actual headrest not matching the fabric color of the chair, the frame of the adapter looks pretty good still. Cheers!
@aCommentor7575 4 күн бұрын
Review from someone who is 6'2: At 1:45 he mentions that he hates a headrest touching the back of his head/neck when sitting upright. I am the same way. The Atlas Headrest's design makes this impossible for someone of my height. Since the support structure that the headrest attaches to is curved, the higher up you move up the headrest, the further forward it's pushed. You might think that since the headrest can be adjusted forward/back that this shouldn't be an issue, but there is absolutely no configuration where-in the headrest does not make contact with my shoulders, neck, or head when sitting upright. As such, it's a must-return for me, which is disappointing, because the headrest feels great when leaning back. TLDR: If you're over 6 feet and you don't like the headrest making contact with you while sitting upright, you aren't going to like this headrest.
@srenkastrup6895 5 ай бұрын
It was be nice if you made a video about the best ergonomic chair for four different body heights, including super tall people (im 198cm). Most of your videos seem to focus on comfort and not ergonomics, which is rate higher. The Fern lumbar support is too low for me. Same with the Steelcase Gesture. Hits my tailbone.
@formulaic78 9 ай бұрын
On the atlas site it says you need both the adapter and the aeron headrest. That's almost 400 bucks!
@Ahnestly 9 ай бұрын
Hahaha you are mistaken! The fern adaptor is $25 atlasheadrest.com/products/adapter-for-haworth-fern-chair
@kitk7248 11 ай бұрын
Need to match the adapter with an Aeron headrest for the Fern. But there are 3 versions of Aeron headrest and they all look the same to me. Which do you recommend? Regular fern with dark grey back here. Thanks.
@Darkntwisty88 8 ай бұрын
I’m 5’3 and I’m trying to decide between the Fern and the Embody. My brother who is 6’2 is absolutely convinced that the Embody is the only way to go, but I don’t know. I like the look of the Fern’s lower back support, and every time you discuss the Embody you mention that weird lower back lumbar feel (the shoe shaper thing) and it immediately makes me lean away from the Embody. I’m wondering if this headrest on a Fern would really do much for me since I’m so short. Thoughts?
@Ahnestly 8 ай бұрын
Hi! The headrest would most definitely not fit you (both the embody and the fern headrests). The Ferns back will be tall enough that it could function as a headrest for you if you slouch a tiny bit down! It does for me and I’m 5’6. Hope this helps! If you decide to pick up, please consider using my link as it helps the channel a LOT! Haworth is doing a 15% off sale right now that ends tomorrow (10/11) in case you wanted to pick up and try it. Returns are free as well, so might as well get it during the sale (my link is in the description or pinned comment)!
@101less 7 ай бұрын
Updates? I'm 5'3" too, and I'd really like to know which way you went. I'd love to have a tilt lock on my chair, too, since i sleep in it, but none of the top chairs seem to even offer that anymore. I might need to build a metal brace to insert and hold it in full recline, since the thought of the chair folding up on me when asleep is very annoying. (It's a health thing and i only sleep well in chairs.)
@colt2356 11 ай бұрын
This is awesome to see. My current headrest is part of a pool noodle, cut down the middle and placed on the top ridge of the chair. Quick question, do you have any problems with the seat cushion on the Fern bottoming out near the middle? I love my Fern, but it's starting to become hard to sit in it near the middle and it feels like it's almost solid now. I've had it for maybe 6-8 months.
@Ahnestly 11 ай бұрын
I think the fern has a firmer seat in general. Haven’t felt the bottom, but I don’t sit upright either (I tighten the back tilt so I’m just slightly tilted back). This takes pressure off of the butt for me
@colt2356 11 ай бұрын
@@Ahnestly I loved the firmness of the seat when I first got it, but now just in the middle it's sunk down to the bottom of the chair. it seems and it has no cushion at all, just in the center. I don't know if I should contact Haworth or if this is normal for these sorts of chairs.
@Ahnestly 11 ай бұрын
Def contact them!
@malcolmharrison28 10 ай бұрын
Waited like a month for mine, and it came in broken, and with some extra attachment, idk what it's for
@OnderTARIM 11 ай бұрын
damn dude... you're making me think selling my HM Aeron
@Ahnestly 11 ай бұрын
Hahahaha dude…digital knit back on fern is probably the best seat back in the game. If you’re serious, try ordering the fern (on sale right now, so good time to pickup), and then return if you don’t end up liking it! And please consider using my link! Helps the channel a lot!!
@XPISigmaArt 4 ай бұрын
Quick question! At 5:50, it's mentioned we can opt in to buy the replacement instead. Does that require buying both the Replacement Mesh Frame and Replacement Cushion (and adapter)? Or can we just get the Replacement Cushion and the adapter?
@Ahnestly 4 ай бұрын
Hey! You need to buy the entire headrest and the adaptor. Later, If you want to change the head part of the headrest, you can just buy that portion (mesh or fabric)
@XPISigmaArt 4 ай бұрын
@@Ahnestly I see, thank you very much!
@XPISigmaArt 4 ай бұрын
@@Ahnestly Sweet, the headrest mentioned it comes with the adapter! Also used your code, thank you!
@SlabbyMess 10 ай бұрын
How is the vantum compared to the embody for taller people?
@kasper_429 11 ай бұрын
Great video as always, Dan! When is the white adapter and cushion coming out? I don't see that color option for either on the Atlas website. Also, idk if they could do it, but it would be cool to get an option for the headrest piece to be available in a matching material to the Haworth fabric/mesh. I know this thing just came out, so they can take their time with it lol.
@Ahnestly 11 ай бұрын
Go to the website and you’ll see the corresponding colors. Mine looks white, but that’s bc I have a lot of light blasting on it! I’m not sure if they’re every going to make matching headrests - this was a clever person from the community coming up with the idea with the existing HM Aeron headrests, and they partnered with atlas headrest to make it come to life for the masses!
@kasper_429 11 ай бұрын
@@Ahnestly Ahh, okay. That's awesome. I'd probably just buy the cushion one anyway, lol.
@sweetsply 9 ай бұрын
Curious to how you went about removing the headrest? Was it easy? Thinking about doing the same...
@Ahnestly 9 ай бұрын
Pretty easy, but take your time. I think I put the link on how you do it in the description. If not, google “remove Haworth fern headrest” and you’ll see a paper document on it online!
@drkenobii 11 ай бұрын
Would this work for the Leap as well?
@Nakso13 11 ай бұрын
Hey could you review the HINOMI H1 Pro please? 🙏
@skittlz111 4 ай бұрын
If you order the one without the headrest initially, does it still come with the hole to add the headrest after the fact?
@Ahnestly 4 ай бұрын
This is a great question and I should have mentioned it. You DO NOT need to buy a headrest version of the fern to make this atlas headrest work with it. It’ll fit in ANY fern! Thank you for pointing that out!! Also, if you decide to pick up either and I helped you out, please consider using my links and code (for atlas) when you pick up! Helps the channel a lot!!!
@Ironwolff-69 11 ай бұрын
Please, what is the black chair in this video? I scrolled through your vids but did'nt see a match in the thumbnails.
@Ahnestly 11 ай бұрын
In 2 weeks! Follow me on socials. I’ve been teasing it there
@ptran1221 7 ай бұрын
With the headrest on the Fern - did you notice that it touched the back of your head or neck with the forward tilt feature of the Fern? It's probably going to be different for everyone due to height, but I'm curious as I'm considering this combo!
@Ahnestly 7 ай бұрын
Hey! I just forward tilted on my Fern and not even close. I scooched all the way back in the chair too, and not even close. If you decide to pick up, please consider using my link for the Fern and the coupon code for Atlas Headrest! Helps the channel a LOT!!
@ptran1221 7 ай бұрын
@@Ahnestly thanks Dan!
@SubdueOG 11 ай бұрын
Does it fit the chair that you removed the headrest from that you have at home? Debating on making the switch since I picked up a fern with a headrest as well.
@Ahnestly 11 ай бұрын
No reason it shouldn’t!
@VG-2792 7 ай бұрын
How difficult is it to remove the headrest that came with the fern?
@Chris-rt8kc 6 ай бұрын
Awesome video! Are there any issues if using headphone while using the headrest?
@Ahnestly 6 ай бұрын
Not if your head is static. If you rock left and right, you’ll obviously bump them, but you get a bit of wiggle room. Check out my atlas headrest comparison video and you’ll see my test done there!
@Chris-rt8kc 6 ай бұрын
@@Ahnestlywow that was quick! Awesome will check it out. And will use your code when purchasing the Headrest. But let me tell you it’s quite pricy. Was just looking at the prices in the shop but taxes came on top at the checkout. Since I’m in Europe prices always includes taxes so no surprises like in US at the end. Makes it around 250€ for shipping to Germany.
@mutantryeff 2 ай бұрын
How do you remove the headrest on the Fern Executive? I finally figured it out. This headrest is a massive improvement, but I would be nice if it came in about 1" more to the back of my neck to provide optimal positioning. I probably only need 1/2" more.
@Ahnestly 2 ай бұрын
Same way you remove the headrest on any fern. Use this guide in reverse instructions.haworth.com/content/dam/digital/north-american-assets/technical-documents/installation-instructions/furniture/seating/fern/fern_headrest_071917.pdf/_jcr_content/renditions/original
@Ahnestly 2 ай бұрын
You won't need to cut/clip anything, since your headrest was already installed though!
@mutantryeff 2 ай бұрын
@@Ahnestly The Fern Executive headrest has to be removed before installing the Atlas. I figured it out.
@Tutku35 11 ай бұрын
I am actually concerned how would that impact the flexibility of the backrest, if at all?
@Ahnestly 11 ай бұрын
Nope you can briefly see how the back and headrest are still moving. It’s because it grips only onto the top most part of the frame in the back cutout, not the entire back!
@legendkms 11 ай бұрын
I need help deciding between the Fern, the Logitech Embody, the Aeron, or any chair that will help my back. I have a terrible lower back and like to sit my feet on the seat crossed from time to time. I need a chair that will help my lower back.
@Ahnestly 11 ай бұрын
Any of those you mentioned are solid chairs. For leg crossed onto chair though, the embody is #1, fern is #3, and it’s not really possible on aeron. Hope this helps, if you decide to pick up, please consider using my link! Helps the channel a LOT!
@twoface696 11 ай бұрын
How did you remove the headrest that came with the fern?
@Ahnestly 11 ай бұрын
google "haworth headrest removal" :-D
@thebrandonrussell 10 ай бұрын
I read in your description the headrest is a "Mineral" color... it looks WHITE, is this right? I'm trying to choose the best color to match the Fern I just purchased. It's got the Navy Blue digital knit, chrome base, and "Snow" accents. Your feedback is appreciated and THANK YOU for your videos!
@Ahnestly 10 ай бұрын
The mineral for the Aeron is a very light gray. I recommend you look at the Herman Miller Aeron colors and that'll help you with which you think looks best!
@thebrandonrussell 9 ай бұрын
@@Ahnestly I received my Atlas adapter and cushion headrest in Mineral color yesterday! I was worried I wasn't going to like the color or possibly like the product... I LOVE IT! I'm 6ft tall and the Fern back is just tall enough I can rest my head on the top of the back, but this is definitely not comfortable for more than a few minutes. The Atlas cushion headrest, like you said, is SUPER comfortable! A few things about the headrest: - I wish the color was a slightly darker gray to match the arm pads of the Fern, but it's pretty darn close. - Then, the 3D print quality of the adapter needs a little improvement, mine has some very noticeable blemishes but since the headrest will be behind me, I'm willing to overlook it. - I was a little confused initially when there was a 2nd adapter in the box, but I quickly realized this was for the Aeron chair and not the fern. Thank you for this review and thank you for the coupon code as well!
@Ahnestly 9 ай бұрын
@@thebrandonrussell my man, I love that you love it!!! Enjoy!!!
@dannyboy2559 9 ай бұрын
Can you get that adapter in white? I only see shades of gray and black. The one in the video I dont see it on the website. Ik the headrest is mineral color but Im talking about the actual adapter.
@Ahnestly 9 ай бұрын
The one in the video is mineral. Mineral is a very light gray
@thesharanaithal 11 ай бұрын
Which is more breathable in summer: Fern or Embody?
@Ahnestly 11 ай бұрын
All variants of Fern, minus the leather, would be more breathable! If you decide to pick up, please consider using my link! Helps the channel a LOT! 15% off sale right now too! I highly recommend the Digital Knit back. It's freaking AMAZING
@thesharanaithal 11 ай бұрын
@@Ahnestly Okay, thanks man
@benhoper8650 11 ай бұрын
would u recommend this headrest for ppl beeing 190cm ? Nice Video!
@Ahnestly 11 ай бұрын
Watch the video! I talk about that!
@malcolmharrison28 11 ай бұрын
5'10 220 chair fits good for me bro i watched yours videos to help me buy, do you suggest i buy some rubber for the chair when i get the headrest?
@Ahnestly 11 ай бұрын
Rubber? What's that?
@malcolmharrison28 11 ай бұрын
@@Ahnestly I just used promo to get thr headrest, you said it might leave a mark on the chair.
@Ahnestly 11 ай бұрын
@@malcolmharrison28 ah i see what you mean! Hm, maybe you could get thin felt pads, but the fit is already really tight.
@benhoper8650 11 ай бұрын
What add ons does the fern offer that is provided in the sale section in your link in the discription. The one for 890€. Does ist have all the add ons you have presented it can have?
@Ahnestly 11 ай бұрын
Hey! I am not using a Euros-based website, so I'm not sure. If you want more details about the Fern and all its features, I recommend you watch my review of it here: kzfaq.info/get/bejne/nJpdktl7nL7NnXU.html
@benhoper8650 11 ай бұрын
@@Ahnestly Hey thanks for answering. Im Sad there is no option for EU people to get the Fern with digital knit. It will upgrade the seat feeling a lot if you trust people who have sat in all cushion versions
@j.m4a1 11 ай бұрын
Hey man what atlas aeron head rest variant is your recommendation?
@Ahnestly 11 ай бұрын
It's the mineral headrest. Atlas Headrest said should be available in August!
@venom5809 11 ай бұрын
Hmm, this might save the Fern from me getting rid of it. I was just bitching to the BTOD guys yesterday about how my Fern doesn't have a headrest and the top of the chair sits on the bottom of my skull and is kind of uncomfortable and annoying. Truthfully I think I like the Embody better and even my Leap V1 I kind of like better. There's a guy selling an Embody with the Atlas headrest on Marketplace, might ask him if he wants to do a trade for my Fern.
@Cl8N_1 10 ай бұрын
i am between a fern and embody - if you had to pick only 1... which one?
@Ahnestly 10 ай бұрын
I'm an Embody fan, esp now with the headrest, it is my #1 overall pick. If you decide to pick up, please consider using my link! Helps the channel a LOT!
@Cl8N_1 10 ай бұрын
thanks@@Ahnestly - the headrest is the main reason that i'm in between the two. I'm about 5'10 and you say you're like 5'6-5'7 and you're taller than both of those seats and i feel i would need a headrest to feel comfortable I'll def use your code when i end up picking one up. They were on sale literally a week ago so I should have bought then so now i'm waiting for them to drop in price again. THanks for the reply
@crewsef 11 ай бұрын
I bought a anda seat phantom 3 because I hate mesh office chairs, Whenever I play games without a shirt the mesh starts to dig into my skin and make me uncomfortable
@Ahnestly 11 ай бұрын
This seat isn’t mesh! They have a digital knit version, which is the one I recommend to everyone!! So soft and pretty dang breathable!!!
@Dylan-5 11 ай бұрын
So the final showdown.. HM Embody Logitech with Atlas headrest vs the Fern with Atlas headrest. One of these will be my next chair (bought the Steelcase Gesture with headrest last year. Not comfortable, have to usea seat cushion.)
@Ahnestly 11 ай бұрын
The 2 ultimate chairs in the business
@kennysughiarto2780 11 ай бұрын
What about using the atlas embody headrest for fern?
@Ahnestly 11 ай бұрын
I literally kept this comment up on my phone until I got into the studio this morning. Unfortunately, the holes don’t align for the actual headrest portion :( and it’s a totally different mount between the embody and the aeron headrests
@kennysughiarto2780 11 ай бұрын
@@Ahnestly gotcha so I guess it wont work and a different adapter is needed, but prob quite unnecessary if atlas headrest works for fern. Is there a lot of different cushioning between embody and aeon headrest made by atlas? Or any different you felt?
@Ahnestly 11 ай бұрын
Headrests are def different. Embody headrest cushion is easier to compress and slightly more flat whereas the aeron has a bit more of a memory foam feel. Both are fantastic in their own ways, but the designs line up to their respective chairs (aeron more rounded; embody more angular). I’m a little concerned that you’re asking me this bc I’m worried I wasn’t clear - the embody headrest will not work with the fern. At all. At least not in any current state. If you manage to come up with some contraption, let a brother know!!!!
@kennysughiarto2780 11 ай бұрын
@@Ahnestly Thanks foe the clarificstion, my initial idea is to use the embody headrest with fern. Guess good to know that it wont work so ill stick with atlas aeron headrest, if they can make embody headrest version for aeroan that prob wud be best.
@ramo_fpv 11 ай бұрын
How do you like the Asus destrier? Im not sure keeping it. I really like the seat and the mesh but I don't like that the chair has only 4 locking positions for the tilt. The other chair which im currently testing (gtchair dvary butterfly) has endless locking positions but I don't like the mesh and the seat
@Ahnestly 11 ай бұрын
Man I am so surprised at how much I like it. It’s what the HM Vantum could have been. Headrest isn’t great, but I think that’s the weakest point of the chair. I’m ok with the 4 locking positions personally - feels like it would last longer than the infinite lock mechanism!
@ramo_fpv 11 ай бұрын
@@Ahnestly oh ok. I personally really like the headrest once I found the postition. I wish the chair would have a little bit more tilt and infinite locking position. Also the back could be a little bit wider for the shoulders. I think there is no chair with which I am 100% satisfied.
@Ahnestly 11 ай бұрын
@@ramo_fpv how tall are you? I had a guy 5’11 check it out and he loved it.
@ramo_fpv 11 ай бұрын
@@Ahnestly im also like 5'11. I also love the chair but for that price I wish I can get a chair which I like 100%. I got used to the smaller back and it works but I still wish it would be wider. Im already sitting on it since 3 weeks. I was so hoping that the gtchair dvary butterfly would be my chair, but it a has much smaller seat, weird back formation, lower quality. Hard plastic mesh
@Ahnestly 11 ай бұрын
Video drops in 2 weeks. If I were sponsored or a video were sponsored, I would have to disclose it by law. I bought this chair with my own money!
@lorelei8791 9 ай бұрын
I really wanted a haworth fern to gift to my boyfriend, but it does not seem to ship to where i am in Canada😢
@Ahnestly 9 ай бұрын
Really? Dang, I thought it was USA + Canada! Try using the Amazon link in my description for Haworth. Haworth sells through Amazon as well and may ship to other places! And the 15% sale applies there as well!
@bradle4162 11 ай бұрын
Does it still maintain the Fern's flexibility?
@Ahnestly 11 ай бұрын
Sorry, editing this. I meant yes it does! It grips onto the outside of the cutout, so it’ll flex with the chair!
@JackD1311 4 ай бұрын
Will it work on the Soji ?
@Ahnestly 4 ай бұрын
No :( soji doesn’t have the cut out
@Ahnestly 4 ай бұрын
No :( soji doesn’t have the cut out
@lesphotosdepapa 4 ай бұрын
Unfortunately, 60 euros shipping fee to deliver to Europe...
@chrisschackart 11 ай бұрын
I have a Steelcase Gesture right now and I was looking into an Embody or a Fern. I was leaning toward the Embody because of the atlas headrest. Now that the fern can have one…. IDK what to do lol Also, anyone looking for a Steelcase Gesture with a headrest? I’m trying to sell it to buy something else.
@Ahnestly 11 ай бұрын
Gesture with headrest should be able to fetch a decent resale value! Post it locally, post price fairly high, see what offers come in!
@chrisschackart 11 ай бұрын
@@Ahnestly thank you for the feedback. I work full time running my own video production company so I spend a lot of time in a chair. I’m always looking for ways to improve my posture and health. When it comes to chair reviews you’re my favorite channel. I feel like you have a video that covers and topic I’m researching. Appreciate the content!
@venom5809 11 ай бұрын
I hate the Gesture but I love the arm rests. I have a Fern and I think the Embody is probably better. Even my Leap I think might be better than my Fern.
@Ahnestly 11 ай бұрын
@@chrisschackart no problem! Stay tuned for next weeks video. I found a product that helps a lot with longevity at a desk!
@chrisschackart 11 ай бұрын
@@venom5809 Thank you for your input! From what I’ve seen the Embody seems to edge out the Fern. I love the way they both look, but ultimately it’s about comfort. I wish I had a local retailer near me I could check them out at. I know they’re assembled in Holland Michigan. That’s only 2 hours away from me. Maybe I’ll drive to the factory 😂
@drh7019 11 ай бұрын
does it void the 12 year warranty?
@Ahnestly 11 ай бұрын
How would they know you used it? You going to tell them?
@drh7019 11 ай бұрын
@Ahnestly lol wouldn't plan on it. Just didn't know if they could figure it out if there were to be wear and tear on the fabric at that spot you talked about in the video.
@malcolmharrison28 11 ай бұрын
@drh7019 agreed, if it leave a permanent spot I would wonder what this guy did.
@malcolmharrison28 11 ай бұрын
I got mine today, my only 2 issues I'm having is the one you stated about the vs the embody the gap In the chair, I'm 5'10 220lb, football kinda frame so wide hips and ny hamstring started to hurt right away, idk if I need to keep tying it or get the embody.
@0.157 11 ай бұрын
Hi! I just curious about your height. I thought it was similar to my height 165cm
@Ahnestly 11 ай бұрын
I’m 5’6
@0.157 11 ай бұрын
@@Ahnestly Thanks! I am thinking about size A and B of Herman Miller Aeron. How about your recommendation? which one is better for me?
@Ahnestly 11 ай бұрын
@@0.157 size B! If you decide to pick up, please consider using my links! Helps the channel a lot!!
@cartellcalloway5045 6 ай бұрын
My chair arived Broken from the factory. Box was in perfect shape. It was put in the box broken. Very disapointed :(
@princeofpromise6436 4 ай бұрын
This feels like a ripoff compared to the Embody headrest. It’s the same $190 USD, but they don’t match any of the fabric/color options?? Unlike the Embody one that looks/matches 100x better :/
@Ahnestly 4 ай бұрын
I can see why you feel that way - keep in mind, this was created as a passion project by an individual, who Atlas Headrest reached out to and came to an agreement to do business together! Also, an Embody costs around $300-500+ more than a Fern!
@princeofpromise6436 4 ай бұрын
@@Ahnestly Yup, it is what it is for now. I’m hoping they come out with more options in the future, I would definitely pick one up for that price if it matches my Heathered Gray Digital Knit. Great vid btw!
Dharni
Рет қаралды 151 МЛН
Ahnestly
Рет қаралды 68 М.
Special Effects Funny 44
Рет қаралды 2,5 МЛН
Reboort_uzb
Рет қаралды 729 М.
EZ-GLAZ
Рет қаралды 29 МЛН
MaviGadget
Рет қаралды 10 МЛН
KOMPUKTER
Рет қаралды 230 М.