The Hunter Auto34 Leverless Tire Changing Machine

Рет қаралды 740,263

15 жыл бұрын

The Auto34 tire changer easily and safely changes the world's toughest new performance tires and wheels. The Auto34, the most advanced leverless tire changer in the world, takes the strain out of mounting and demounting difficult wheel and tire assemblies.
Tire changing has never been easier thanks to Hunter's tire changer machine. The Auto34 if the fastest leverless tire changer in the industry. Hunter's tire changer machine is the best in the industry!
More detailed information on the Auto34 Tire Changer
www.hunter.com/tire-changers/a...
How to Use the Auto34 Tire Changer (Video)
• Hunter Auto34 Tire Cha...
For more information on the Auto34 and other Hunter Tire Changers, visit
www.hunter.com/tire-changers
Hunter Engineering Company is the leader in alignment systems, wheel and tire service, brake service and inspection lane equipment. Hunter equipment is approved and used by vehicle manufacturers, automobile and truck dealers, tire dealers and service facilities around the world.
For additional information, visit www.hunter.com for all your shop and garage equipment needs.

Пікірлер: 110

@henrysmith8012 2 жыл бұрын

I worked at a Hunter plant years ago. This one should sell out fast.

@MyEyesBled 12 жыл бұрын

Forget work.... I would love one of these in my garage at home :) !!!!

@joeparker2719 5 жыл бұрын

The tire Changers amazing I've been doing Tire work for almost 30 years that's awesome

@funkyed985 10 жыл бұрын

Wow, this machine looks awesome. Wish we had one...

@runtimkle5276 7 жыл бұрын

very interesting to watch

@HunterEngCo 12 жыл бұрын

@noobleskthx Many larger diameter wheels are reverse drop center. Typically this is found in wheel sizes 24" and greater, but can be found on virtually any diameter. You must mount and demount reverse drop center rims from the back side or you will damage the tire and/or wheel. Glad to hear you use a bead depressor, it is a very powerful tool

@lnr08f 12 жыл бұрын

that machine looks awesome.

@stevematz7354 10 жыл бұрын

I had a New Set of CENTERLINE ALUMINUM/ALLOY Rims 15x10 with Pirelli P7 315x15 x45R put on with this Hunter 34 changer and it didn't even leave the hint of a Scratch on the outer rim...Great Machine..s.m.

@shanoferry7181 8 жыл бұрын

wish we had one to thats awesome

@zorinlynx 5 жыл бұрын

Today I learned how tires are changed! This is awesome!

@HunterEngCo 5 жыл бұрын

Thank you!

@RayTitske 10 жыл бұрын

very nice machine

@dandeac1907 7 жыл бұрын

All the tire shops should have this machine. A lot of people they have painted rims and when you change tires the first time after that full of chips and scratches.

@Vega50513 5 жыл бұрын

People don’t want to pay for the service

@Max_Da_G 12 жыл бұрын

I work with older conventional machines and often find that I have to leave at least a 5mm gap between then stripper arm and the rim edge otherwise the head simply bends forward and scratches an edge. Some machines are very rigid and its not an issue but some move excessively. Are the stripper heads metal? How rigid are they when size is locked in? Thanks

@ejagger 11 жыл бұрын

Hunter tools = innovation.

@HunterEngCo 11 жыл бұрын

There is no gouging of the rim. What you are seeing is paste that is on the mount head coming off on the rim edge. It is virtually impossible to mar a rim with this mount head as it is entirely plastic. The benefits are multiple. A thin leverless mount head provides the most low force mounting and demounting available. Low force means reduced risk of rim and tire damage. Also, the mount head runs under the rim edge on the inboard side, not in a visible area.

@arthur1920 11 жыл бұрын

Will it do Splined hub center knock-off wire wheels?

@thumasta666 13 жыл бұрын

are these meant for just low profile tires and runflats, because at my work, they just got a auto24 and they want us to use it on all aluminum rims, and i find its not as easy as a conventional machine when doing higher profile tires... what would you suggest?

@HunterEngCo 13 жыл бұрын

@thumasta666 While the Auto34 excels at low profile tires, it is suitable for all rims an tires. The built in damage protection especially applies to all aluminum rims. As familiarity with operation builds you will find yourself almost as fast on easy rims with the Auto34 as you were with traditional equipment. Thank you for the question.

@jameykabage 3 жыл бұрын

What is the cost for this machine ?

@HunterEngCo 3 жыл бұрын

@@jameykabage Please visit www.hunter.com/contact and select your location from the dropdown. From there you will be provided with a local Hunter Representative's contact information who can provide pricing.

@EstablishedLowriders 4 жыл бұрын

This machine looks amazing and easy to use!! Great video!

@arthur1920 11 жыл бұрын

What about tires that have inner tubes? when that arm pushes down the bead will it pinch the tube?

@fabiolinares1895 2 жыл бұрын

Great size

@kamendez38 14 жыл бұрын

I would love that at my work.

@HunterEngCo 12 жыл бұрын

The mount/demount head on the Auto34 is entirely plastic. Furthermore, it rides slightly under the rim flange in an area where it will NOT damage rim edges. There is no part of the head the overhangs the rim face, unlike a traditional head. This tire changer is optimized for the toughest tires and most expensive wheels. You have to really work hard to damage those wheels with this tire changer!

@ACommenterOnYouTube 5 жыл бұрын

Props to the person or people that DESIGNED this machine ... !!! There is NO way a low profile tire 40 series or less can be changed by hand... This is why these machines exist, they have the power to bend that sidewall to flip it over the wheel ..

@codman-ic5pt 5 жыл бұрын

Clearly you have never used a tire machine... with the right knowledge and experience you can chance any tire

@ACommenterOnYouTube 5 жыл бұрын

@cody garrett: Wow... clearly you have a lack of understanding on what you read...

@dil6969 5 жыл бұрын

I have seen a 285/30-19 runflat tire mounted by hand with an old school hunter tire machine. Granted, it was done by my coworker, who's strong as hell and worked for 2 years at discount tire. Even with two giant tire levers, and copious lubrication, it was a stressful and frustrating experience for him. I'm glad we got a machine similar to the one in this video. Less risk to the rim, tire and the poor guy operating the machine.

@sailumjuzzto4101 3 жыл бұрын

Esta chingona💪👍

@havagoodyear7142 11 жыл бұрын

This is our go-to machine for high-end wheels and tough tires. We stopped fixing and buying wheels after we got this machine.

@zurriekc5381 2 жыл бұрын

keep it up bro...

@HunterEngCo 11 жыл бұрын

The press arm will not damage inner tubes, nor will the mount head.

@HunterEngCo 11 жыл бұрын

Splined hub wheels can present some difficulties because there is a drive pin on the clamping plate. The drive pin is designed to go into a lug hole which doesn't exist on splined wheels. There are two alternatives; 1) Remove the drive pin for these wheels. This will take about 5 minutes. 2) The drive pin is on a pivot and with some wheels you can just move it out of the way.

@HunterEngCo 12 жыл бұрын

@vr4ish Yes, it can!

@sexxmanuel 7 жыл бұрын

I wish i have one in the shop..i still have issues with low profile tires lol

@gregorysampson8759 5 жыл бұрын

We love it.

@HunterEngCo 5 жыл бұрын

We are happy to hear that!

@matty3493 11 жыл бұрын

id love 1 innovative and sleek

@vicxxoo 13 жыл бұрын

@vgmnstr how much did you get it for?

@user-rx1es4br2m 6 жыл бұрын

Когда у нас на таких колесах ездить будут и мы такой стенд купим👍

@jetrocket900 6 жыл бұрын

Роман Абрамович поэтому у нас никто на таких колесах и не ездит, потому что никто их собрать не сможет т.к стэнда не у кого нету 😂

@YOGOGaming 12 жыл бұрын

This may sound stupid, but why are the low profile rims upside down? Does it make it easier? Cause i've got no problems doing 25 series tires with nothing more than a bead depresser and a roller with the rim face up. Mind you, it is on a hunter machine, but not that high tech... I actually have to work a little bit lmao.

@5096PS 11 жыл бұрын

I'VE SEEN THIS MACHINE IN ACTION,,,IT'S UNBELIEVABLE COMPARED TO ANYTHING OUT THERE SAYS THE OWNER OF THE MACHINE.

@HunterEngCo 11 жыл бұрын

As mentioned above, the mount head runs under the rim edge. This is helpful with painted wheels, although without question painted wheels take more care than any other finish. Good practices and plenty of lubrication can successfully mount these assemblies.

@TieuXuanTu75 8 жыл бұрын

best machine can do 3 thing same time..change tire

@mikethebossofficial7270 6 жыл бұрын

We have one at workshop

@marks146 11 жыл бұрын

At 3:28 I see the head puts a gouge in the rim. Any contact with aluminum can cause a mar. This unit seems to touch the rim at many points of the operation. What is the benefit?

@rts159 6 жыл бұрын

Chipper M that’s grease, im guessing handles are made out of soft rubber not sure

@SamsTV81 12 жыл бұрын

The term is "Reverse Mount" you will find wheels with a big outer lip (deep dish) are usually reverse mount.

@LTVoyager 7 жыл бұрын

What is that spear shaped part that drags around the wheel face? Is it plastic also to avoid scratching the wheel?

@HunterEngCo 7 жыл бұрын

Thank you for the intelligent question. Yes, it is soft, bendable non-marring plastic. It activates the auto-indention function for bead breaking. The finger itself has no electronics, it is simply a plastic covered magnet that activates indention when it's lifted.

@thomasw5776 5 жыл бұрын

@@HunterEngCo ALL PLASTIC IS MARRING

@Jay_Flippen 3 жыл бұрын

I want that.

@timothybetancourt4756 7 жыл бұрын

It takes out the fun of actually working

@MrBlahblahblee 5 жыл бұрын

scratch my $4000 wheels and we'll see how fuckin fun it is

@Aeonoftherift 4 жыл бұрын

Question. Can this work well in lawn tractor tires?

@HunterLearningChannel 4 жыл бұрын

Probably not, the smallest wheel diameter that machine can service is 10”. Smaller diameter assemblies like lawn tractor and ATV/UTV sizes are better serviced on one of Hunter’s tabletop machines like the TCX50. The TCX50 series clamps at the wheel edge, down to a 6” diameter wheel. Thank you for the question!

@RustyCarnahan 5 жыл бұрын

And to think that an old Coates tire machine was once as "cutting edge" as this!

@saj5935 3 жыл бұрын

Iam still using 😀

@brettbrinkman4387 8 жыл бұрын

does it require tpms sensors removed before use???

@HunterEngCo 8 жыл бұрын

No it does not, thank you for asking.

@R3STL3SSGH0ST 12 жыл бұрын

Great.... :(. Now I want one of those and a wheel balancer. Does it inflate the tires too? :D No - I have zero experience with anything like that, but it looks safer than the traditional rigs I've seen. Be a cool option for my family - Your getting your tires changed? Heyyy!!! I could do that...... lol.

@syedtabraze5793 3 жыл бұрын

Price. Kya

@chocoface1 10 жыл бұрын

is it capable of changing motorcycle tires

@runtimkle5276 7 жыл бұрын

Cory neiman thx

@HustlePaul 4 жыл бұрын

Anyone know how much these machines go for ?

@trd973 3 жыл бұрын

About 24k

@vreckless817 10 жыл бұрын

Rims Get scratched?

@illla 4 жыл бұрын

They do. Look how the tool touches and drags the tips on the rim lip.

@MasonFPS 12 жыл бұрын

it looks like if it were a regular mount wheel, it would damage the face of the wheel with the tool riding against it like that. regardless, I want one at my shop.

@user-zt1qh1on8s Жыл бұрын

Kitne ki hi

@joelclark9984 5 жыл бұрын

Well of course this works on chrome and alloy wheels, lets see it on painted ones! XD also what about motorcycle wheels? This machine is 15~30k vs a 1k machine that could do the entire process and is proven to work on all sorts of wheels and finishes. I don't buy that the plastic wont leave any residual marks either I don't car how soft you say it is, you're using it to pry a tire off a wheel it's got some tensile strength.

@TRDboi85 12 жыл бұрын

the rim inside is too deep for the middle to lined up on to mount the rim becuz u have to line up on one of the lug nut hole the middle hub hole.

@hectorgarza5575 5 жыл бұрын

What about the tire sensor??? Looks its going to hit it and snap it off

@HustlePaul 4 жыл бұрын

Best to remove the sensor and reinstall it when the tire is on

@orlandomartinezcossio7671 5 жыл бұрын

👍 🇲🇽

@199jl 14 жыл бұрын

how much would that cost a fella

@sondoan2524 5 жыл бұрын

Cho mình báo giá sản phẩm nhé

@HunterEngCo 5 жыл бұрын

www.hunter.com/hunter-international

@Teebee288 12 жыл бұрын

you are very close to the tpms sensor when you demount the tire at 3:54 normally you must put the tpms sensor not after the demount arm but before, I'm specialist of these no contact tire machine and in 13 years i trained over 250 persons for these type of wheel and machine.A lot of people broke tpms sensor when it place after the demount arm like you're doing.And put a lot of tire soap even when you demount tire, a lot of people breake the tire beat when demount low profile run flat tire.

@mrmurdx8956 6 жыл бұрын

This looks like a 1.5 million dollar piece of equipment

@hanzhang4846 4 жыл бұрын

Srsly no lube? U know how many tires you are gonna rip?

@HunterEngCo 14 жыл бұрын

@199jl The Auto34 is sweet! Please call 1-800-448-6848 and have a sales rep drop by to give you a demo!

@mazharshahzad5025 4 жыл бұрын

How much praice in pakistan

@HunterEngCo 4 жыл бұрын

www.hunter.com/hunter-international

@thegeneral3094 4 жыл бұрын

I'll stick to knives and kitchen spoons. Never failed me yet .

@donmeisinger3921 11 жыл бұрын

If you want to stop tearing up tires and wheels then this is the right machine.

@sakshipal2076 2 жыл бұрын

Ye machine ka kya naam h bhai Lani h

@HunterEngCo 2 жыл бұрын

हंटर ऑटो34

@joenorris6500 11 жыл бұрын

If you do high-end / expensive tires & wheels, this is the only way to go!

@AmericansFavorits 12 жыл бұрын

talk about lazy lol jk that tire machine is so nice i wish i could use one like that soon

@gregmurphy5711 3 жыл бұрын

Cool idea. But its slow.

@chevyred427 12 жыл бұрын

That thing seems like overkill.

@215waterboy 11 жыл бұрын

So easy, a caveman can do it!

@vr4ish 12 жыл бұрын

can it handle run flats those things are a bitch by hand

@rigidblizzard3335 3 жыл бұрын

I’d rather change it myself.. it’s a lot faster

@donmeisinger3921 11 жыл бұрын

This could be the only tire changer you will ever invest in. It does from small to large tire/wheel combinations without damaging either and greatly reduces operator effort on very difficult and fragile wheels. It's so beefy that I don't think you can wear it out or break it.