The Hunter Auto34R Tire Changer: Detailed operations video

Рет қаралды 41,125

Күн бұрын

Hunter Engineering’s Auto34R Tire Changer was designed for maximum speed, ease of use, and accuracy and precision. It was also designed to service the broadest range of assemblies, while dramatically reducing the risk of tire and wheel damage.
In this detailed instructional video, Tire Changer Product Manager Jim Hudson provides plenty of tips and tricks for getting the most efficient performance from your Auto34R, including guidance for dealing with common difficult wheels. Topics include:
Standard operation, demounting and mounting: Jim discusses clamping, the importance of indention and rotation during bead breaking, tracking the TPMS sensor, setting tool head memory, and keeping the tire in the drop center with the bead press.
Advanced operation, demounting and mounting difficult assemblies: Reverse wheel identification as well as help with handling difficult assemblies like large wheel diameters, low-profile and run-flat tires.
For more information on this efficient, innovative tire changer, visit www.hunter.com/tire-changers/....
0:00 - Standard operation: Demounting
2:40 - Standard operation: Mounting
3:35 - Inflation
4:42 - Advanced operation: Demounting difficult assemblies
8:32 - Advanced Operation: Mounting difficult assemblies
10:01 - Clamping reverse wheels: Flange plate

Пікірлер: 21

@ikesquirrel 9 ай бұрын

I worked at a tire shop and a guy brought in some super low pro tires. The manager told us to do them, even though our policy said not to. We finally got them mounted, but the beads would not seat. The manager got involved in the work at that point and the pressure went to 80 psi. Still no change. Lube didn't matter. The manager then asked us to leave the work area and took the pressure to 100 psi, mounted the wheels, then bounced the car on the ground with the lift. The tires finally seated at 110 psi. Crazy.

@raider762 Жыл бұрын

Used on of these before at the Toyota dealer I used to work at. And a Coats 9028E Tire Changer. This machine works ok. The Coats was my favorite though, the 3rd arm makes more complicated tires easier for me. My grip is the foot pedal is inverse of what the Coats is for the table spinning direction. 1st tire I did on this machine I spun the tire the wrong way and the bead chomped on a Tire sensor.

@sethglenn9022 Ай бұрын

I'd like to see how that head holds up to silly aftermarket wheels with raised spokes. Those raised spokes would SMOKE that hook. Also curious on how it performs on low profile 12 ply tires. If I'm spending this kind of money on a machine, I need to know it can stand up to the extremely high effort tasks.

@creature8424 2 жыл бұрын

I wish they showed how to mount low profile tires 🙄

@glennoidgeebee2121 2 жыл бұрын

the last demonstration was a very low profile tire? what's low is low to you?

@jarredwoods1448 2 жыл бұрын

This is like buying a Ferrari when you really just need a daily driver , neat machine , but I'll stick to a rim clamp with a single power assist , this really overcomplicating things afaic

@andrewcampbell-young8426 2 жыл бұрын

275 25 28 and 295 25 28

@jarredwoods1448 2 жыл бұрын

@@andrewcampbell-young8426 yeah you mount those on the ground with bars !

@andrewcampbell-young8426 2 жыл бұрын

@@jarredwoods1448 lol nah our old machine the table smoked out a couple weeks back so we are doing trial runs on this machine to see if we can find flaws in it we got a couple of 30in and two 28in pairs we got to mount 3pc wheels of course