The Jetters Edge Training Module, Jetting Tips and Nozzle Selection

Рет қаралды 88,572

13 жыл бұрын

Training module demonstrating how to keep your root ranger nozzle from getting caught in a junction and nozzle selection.

Пікірлер: 24

@DrainAddict 8 жыл бұрын

I know this guy, his name is Bill and he knows what he's talking about when it comes to clearing blocked drains, he has designed and produced some of the best drain jetting equipment in the world.

@MayfairPlumbingandGasfitting 9 жыл бұрын

Great video, thanks. This is another great video from the team at Jetters edge, well done guys!!

@GeelongCableLocations 9 жыл бұрын

Great video guys.

@roaddiablo 6 жыл бұрын

Because one can tell when they're coming to the junctions. And know which direction it goes? In the USA, it's under slabs and no way to know

@brandon3671 3 жыл бұрын

That’s why you use a cctv camera and locator

@myf1165 Жыл бұрын

Hey Ollie what size jetting hose do u use? 5/16 or 3/8?

@user-ik8nr9dx4c 7 жыл бұрын

Good

@wickedleeloopy2115 8 жыл бұрын

these things are a nightmare 🙈 when they get stuck

@keithholley 6 жыл бұрын

PUT AN SMALL EXTENSION ON SIMPLE

@siotonga6210 6 жыл бұрын

i am a drain unblocker their is no way you going downstream with the root ranger then pull back the jet to go upstream from a y junction it's easy with this video cause you cut the y junction open.

@bill26011 6 жыл бұрын

Sio Tonga this happens a lot in our drains in Australia. Maybe it’s because we are using small 3/16” hose. What size are you using?

@sidelm 4 жыл бұрын

Nozzle box very very $$$$$$

@thejettersedge 4 жыл бұрын

sezgin öz These are premium products that come with a lifetime warranty. When you pay a little extra, you pay for quality 👍

@sidelm 4 жыл бұрын

@@thejettersedge I understand you very well, I do not use the cheap product in my own workplace, but it is very expensive in our country conditions, 1 AUD = 3,89 TURKISH LIRAS 😆😆

@gilbertdueck4826 3 жыл бұрын

What are the chances of the quick coupler releasing in the pipe?

@wickedleeloopy2115 8 жыл бұрын

👀 Am I the only one who realises you going backwards up the drain instead of down the drain as the junction would be installed in the direction of flow.

@thejettersedge 7 жыл бұрын

The drain can be cleared from both directions so this shows how you can avoid problems when used correctly.

@daver7867 6 жыл бұрын

Hans Klusser - Yes it can....i do a little work in the drainage area, and sometimes you can’t access a dwnstream wastewater pipe because where it’s located or it’s buried, and the easiest access is an upstream manhole or inspection chamber so you jet from there.....done it many times just because of access. But I drop the pressure when pulling back to lessen the risk of pressure going up service lines or laterals towards house.