Thanks for watching! I've make a playlist of my favorite woodworking projects: kzfaq.info/sun/PLhqK_8dnaIW3V6a66AdyRI9DJUZwCSm83

Awesome, thanks so much for showing off the fence, hope it works well for you for many years!

“I don’t understand science, I just believe in it” should have been the motto for 2020

2:05 the moment you realize David keeps all his nudie mags in the drawer under the drill press.

If you make and sell a t-shirt and/or wallplaque that reads "I don't understand science, I just believe in it." I will throw dollars at you like it's Friday on the strip.

Congrats on 700k! I want a shirt, “I don’t understand science, I just believe in it.”

The way you talked, I was expecting $400+! That’s not a terrible price, especially given the quality products that Andrew Klein is known for

Save your money get a 2-inch piece of angle iron some clamps and your good. I use it all in my shop. Angle iron is at 90 degrees it's great.

This fence can be used on most metal surface tools, bandsaw, table saw, drill press. I think it would make a pretty nice bandsaw fence, comparable to Carter Magfence but better.

The top of the fence will interfere with the press handle, maybe only one side should be that high? Or make it able to swing out like some chop saw fences

Saw this fence on Wood Whisper channel last Friday. Always nice to hear your view on it too.👍

I felt like the price was totally reasonable, I was expecting it to cost a lot more!

Ordered the smaller one. Thanks for the discount code, worked a charm!!

I understand science and I don't believe in it, checkmate Picciuto

Fantastic review, Dave! Nicely done! 😃 Stay safe there with your family! 🖖😊

Been into the whiskey a little before this one lol.

Nice fence. Just watched Izzy do a similar presentation of that same fence....👍👍😉😉

Uhhhhh, more stories about Chuck, please! 😏

This must be really new and making the rounds fast. This is the third maker channel this week I’ve seen to feature it.

Still waiting to see your product" the 'Picciuto Measuring Tape' or maybe 'Tape Something'? 😂

Great demo David, this toll is machined to robotic standard tolerances to give exact angles. thanks for the love.

That was an awesome one minute videoclip for a fence! Nice synths sounds!! And a great product, to. =)

This is fantastic! My drill press just has a big flat plate without holes, this will be awesome on it. Ordered, and even spelled your name right the first time 😁

Nicely done man! Love this fence!

Very nice and useful product, always enjoyed watching your videos, its very inspiring thanks

I have it, it's another hand, very accurate, easy to set or resetting, very functional, for me it's a game changer.

First, get drill press ( I need one BADLY lol) second, get this fence ! Great video brother

"Things get hot and messy" lol 2:41

Oohhh the puns in this are amazing! Also, most epic hole drilling sequence ever

Sweet. Just preordered the Pro. Looks awesome!!

Entertaining. Great vid “Dan”. Honestly most of the cost is in 3 mag switches so I’m surprised it’s not more $$. . Andrew K is indeed a genius and deserves everyone’s support. People who rail against great tools know the cost of everything but the value of nothing. If you don’t want a great fence, you always have the 2x4 and 2 harbor freight C-clamp option. I DO want a great fence and will sacrifice one great bottle of Bordeaux to have one. It’s priorities.

looks really awesome....

Your fears on the router - I FEEL YOU. A router nearly took off a few of my fingers in shop class in the 7th grade.

Very good work and cool looking

I’m interested in the small fence, that’s the one I’ll probably buy. I immediately noticed how the handles of the press hit the top of the taller fence. That would drive me nuts. And $150 is not outrageous. That’s a reasonable price IMO. When you were going on I was expecting something like $400.5

Thanks for showing me that fence as soon as I saw it I went a bought it ... and I didn’t think it was that bad of a price.... specially something that is going to last you a lifetime.....

That section of the video near the end was like an acid trip 30 years ago. One of the good ones lol, keep up the good work!

2 questions: 1- what was blurred out? Herbals? 🪴 2- why no love for Chuck?

The price wasn’t as scary as you led me to believe. May not get it just yet as there are some tool upgrades that I need to do first. But, as always, great video and love “spaceship mode”!

Nice fence the smaller one is nice to. Izzy also has a video with a few accessories he made to compliment it as Izzy does.

3rd video I've seen with this fence. Great design.

I've had a homemade magswitch fence for over 4 yrs and I love it! This one looks great, but the high fence on the right seems to interfere with the quill handles (both you and Izzy have handles removed, and for good reason)... Perhaps an improvement might be to just have a high fence on the left and leave clearence or the handles on the right.

I frickin loved Chuck!!! He had great bat facts! 😂

you started talking about the price and I was assuming 5 hundy.. A buck fity is about the same you would pay at Rockler, hell maybe less.

Ordered one the 1st day from Andy. I cant wait to get mine

Super cool. This isn’t as expensive as I expected. Nice job setting expectations. I would buy one right now, but I need a working drill press first. Haha

I missed "fence" in the title and waited for you to talk about the drill press for a hot second before re-reading that this was about the fence. XD Don't mind my smooth brain being here.

Should we start a "let's guess what's in David's drawer" thread? 🤣

I got to say the way you guys film and edit your videos is one of my favorites, very fun and entertaining the whole way through. Very cool fence as well I love the magnet idea.

I appreciate recommendations like this. I like knowing the range of tools out there so as I get better, I know where to spend my money on shop improvements.

I kept waiting for Mark Mothersbaugh to start singing during spaceship mode...great tune!

SPACE SHIP MODE!

I ordered the large one on Monday but after seeing some comments here and on other sites, while also thinking of other ways I can use these in the shop, I ordered the smaller one today using your affiliate code :). Anything that sits dead square when attached to a flat cast-iron table is going to be useful in many ways

“Andrew, remember Andrew? He was two guys after Chuck and invented a fence. I think he’s in jail now. He writes me letters but I don’t open them.” Future quote from Dave.

Drunk Make Something videos are the best! Got me like 😂

Love that drill press! The fence isn't expensive for a quality made tool - I was thinking you were going to say it was $500 or something.

"Code goes here" Love it!

Great video David. Just wondering what was blurred out in the drawer? Love the science remark. Keep up the good work.

I just noticed the way you have your drill press and lathe positioned. Great idea! 👍

Nice! Looks good

That's no drill press, it's R2D2. Great video, well done. Love the bg music. Andrew is awesome. Mahalo for sharing! : )

I have an incra fence. It does everything I need it to do.

Hilarious and informative! Perfect

What if the old wooden drill press table was acrylic? (Or some other plastic, and maybe just a top layer) Do you think it would deal with oil in an acceptable manner?

Izzy swan just released his video at the exact moment your video was online about the same thing

This does look like a pretty sweet setup. And the price was not nearly as bad as I thought it was going to be. Always buy the best tools you can afford, right? Great review. Thanks for sharing!

0rdered tonight. Awesome!

best product review ever!

I was expecting this to be north of $300 with your disclaimer, the price is not bad at all. A lot of people on the internet like to complain about the price of premium products and I find it incredibly annoying. Most have no idea what it takes to bring a product to market, especially something thats low volume. They assume the creator is 90% profit margin or something. Looks like a nice fence. When I upgrade my press I will look into buying this. I honestly hate using a drill press most of the time (mediocre press and no fence currently).

I think the price is great considering it also comes with the three magnets. I assumed those would be sold seperately.

David, great video on the fence. It seems a little tall. I noticed the drill press handles interfere with the fence. Also looked up your drill press through your link and it is not available. What is up with that Terry

I drill my "holes" under mood lighting too.

To everyone complaining about the fence height, they do make a shorter version!

The way you talked up the price I was expecting a lot worse. That is about what I would expect given the price of the magswitches themselves. I’d like to see how it behaves when drilling steel. How hard is it to clean the shavings off the switches?

Seems pretty sweet. You should use a larger piece of Al or something magnetic to make a bigger metal drill press table and then make a small MDF insert for avoiding blowout. Then you have a large table and the nice fence

The drill press fence would be great if Mag-Switch would deliver them. Pre-ordered in February and after a mountain of excuses, no delivery. It is the middle of June.

Like others have mentioned, I wondered if the fence would block the handles of the press as one is lowering the chuck during a drilling operation. I suppose one could put a spacer between the fence and the work piece, but keeping the fence low on one end and high on the other end so the fence can be flipped around would be nice. Also, for that price I'd like to see a rail milled into the face of the fence. Nice idea otherwise. ETA: Looks like David removed one of the handles on his press - was that to avoid an interference issue?

David’s new album, “Dan’s Ready For Action,” will be out soon too!

Personally, I don’t dream of drill presses. Still loving the music. Still loving the fun. Stay passionate 😁

So how do you really feel about your old drill press???

I only thought about one thing during the second half of this video..... What was blurred out in the drawer!!!!???!?!?!

Using the drill beep to beep the swear... genius

😂😂 congratulations Dave your the 4th KZfaqr that’s done a review on this fence this week. You need to be a wee bit quicker. 😂😂 Great video though.

ugh. just paid 170$ on a fence for my 230$ drill press. looks well made; expecting this to legitimately last me 30+ years and be useful on *multiple* ferrous surface tools...

"Code goes here", nice Easter egg 😆

What are the LED panels you use to light your videos?

I just bought this and the fence slides. My table is clean. Is this typical? I’m returning what I bought and am unsure if I should get a replacement or move on. Otherwise very well built and solid. Any thoughts?

How could you do multiple stops? One would be in the way of another.

congrats on the 700k!

Chuck was mentioned on the first ever episode of Brainpick (2014), which, by coincidence, I listened to yesterday.

Dave, I feel like the science phrase you were looking for was, "...I don't understand science, but that's why science is so great, it works even when you DON'T believe in it..."

Now that you have had the new drill press fence for 5 months, how do you like it? Mine should show up once it ships. I look forward to it getting here. :)

I’m gonna get gross **NSFW** I thought that drum/percussion sound at the beginning of the montage was a joke about Dan *beating it* behind the camera because you said “Dan is ready for some action” I LOVE that fence and I love Andrew taking mag switch to a whole new level. It’s awesome. Not badly priced either !

Your next frame video: "I don't understand science. I just believe in it." 😉

Sold!

Nice, precision machined surface on the stop. Make Something: *repeatedly slams it on the metal table.* 😆

“Let’s drill some hoes...holes!” I find myself cracking up at least once in every video

I have the same drill press and am waffling on which size to order. What are your thoughts on the two sizes of fence for it?

Price isn't that bad. Actually very reasonable for what it is and what you get.🤔👍

"The last drill press fence you'll ever need" sounds like a death threat