The Launch of Flipsky 75100＆75200 Pro V2.0 with Alu. PCB

Рет қаралды 1,402

6 ай бұрын

Hello, guys!
Today, I will introduce the launching of FSESC 75100 pro V2.0 and FSESC 75200 pro V2.0.
75100 pro V2.0: tinyurl.com/4vnvpms8
75200 pro V2.0: tinyurl.com/yv5h8m2d
Please check them out.
Both of these ESCs' updates are as follows:
1. Built with phase filter
2. Designed with power on/off switch
3. Integrated in Bluetooth Module
4. The latest firmware: 6.02 (firmware update supported )
00:08' The appearance of both ESCs
00:12' The wiring diagram of both ESCs
00:17' The upgrades of both ESCs
00:22' How to do parameter settings
Follow Us On Social Media, thanks!
/ flipsky_tech
/ flipskytech
#flipsky
#vesc
#escs
#diyesk8
#flipskytech

Пікірлер: 27

@rufruf871 6 ай бұрын

Привет Отличный продукт Наконетсто !!!!

@FlipskyTech 6 ай бұрын

Thanks for your support.

@zeal8326 2 ай бұрын

75100 pro v2 100A is Phase or Battery current?

@LencoSolutions 6 ай бұрын

Nice , now just add a imu like the bmi160 and we're golden

@FlipskyTech 6 ай бұрын

Thanks for your support.

@Razorcrew_Cole 3 ай бұрын

So happy you guys finally made the key loop. Now why no 3 speed or dash signal wire???

@FlipskyTech 3 ай бұрын

Do you mean the servo PPM wire?

@Razorcrew_Cole 3 ай бұрын

@@FlipskyTech I don't know what that means. I would sell flip sky but you guys don't have three speed.

@FlipskyTech 2 ай бұрын

@@Razorcrew_Cole The escs based on vesc are built without speed level limit and controlled the speed via throttle gear. Our new none vescs support different speed levels.

@Razorcrew_Cole 2 ай бұрын

@@FlipskyTech Yeah but can we plug in a three-speed switch?? I'm trying to get Jordan Davis and Jeremy Madox to get you guys to do it. I will be reaching out soon and trying to start working with you guys if you can do that. I begged and begged for that key/volt meter

@FlipskyTech 2 ай бұрын

@@Razorcrew_Cole For this esc based on vesc, our engineers haven't tested successfully for 3 speed levels throttle bar. The new non-vesc escs are workable for different speed levels throttle

@jonathangueguen3352 4 ай бұрын

This does not tell me the real function of the phase filters and what does that change?

@FlipskyTech 4 ай бұрын

With phase filter, the real data will be more accurate.

@muramusan 6 ай бұрын

Nice with bt programing that's good hope it can be disconnected for hacking reasons lol. Might try to mod it to a Bafang bbs02b or bbshd

@LencoSolutions 6 ай бұрын

You can turn on pairing done in vesc and it won't connect to any new BT devices anymore.

@FlipskyTech 6 ай бұрын

It's sounds great.

@muramusan 6 ай бұрын

@@FlipskyTechI sure hope it sounds, not great 😂 like silence 🤐 😂

@rufruf871 6 ай бұрын

Можете делать , Вещи Молодцы

@FlipskyTech 6 ай бұрын

Thanks for your support.

@Kaci2137 6 ай бұрын

and what phase filter do?

@FlipskyTech 6 ай бұрын

Hello, sir. There's no need to turn off the phase filter when you are doing parameter settings.

@jonathangueguen3352 6 ай бұрын

@@FlipskyTechVous n avez Pas répondu à la question !! 😅

@FlipskyTech 6 ай бұрын

@@jonathangueguen3352 🥰

@johgude5045 4 ай бұрын

it will kill your 75100 V1 if you turn it on!

@FlipskyTech 4 ай бұрын

@@jonathangueguen3352 The pro V2.0 version escs have built with phase filter, so no need to turn off the phase filter. Other versions without phase filters need to turn off the phase filter. Thank you.