The problem with DNA wheels, and how to fix it! Don't use fix a flat in Harley custom wheels!

Рет қаралды 8,078

2 жыл бұрын

This is the second DNA wheel that I have found with this problem! The wheels have a silicone strip glued into the drop zone of the wheel eliminating the need for an innertube. The silicone comes undone, and the wheel develops a leak from the spokes! I had to dig all the silicone out and grind the spokes flat to put an innertube in place. I think there had been fix-a-flat in the wheel. There were green dried up chunks in the wheel. DON'T USE FIX A FLAT IN A DNA WHEEL! Don't forget to like, subscribe, and hit the notification bell to keep up with my latest videos!

Пікірлер: 40

@twisteddesi4089 2 жыл бұрын

That’s crazy .. you’re awesome man. I really like how you go beyond your limits to make things right for your customers.. hats off to you

@WrenchesCorner 2 жыл бұрын

Thanks man! I enjoy what I do!

@gnsmk357 2 жыл бұрын

Just put DNA large spokes on my winter softail build. Good information. DO NOT USE ANY CANED AIR. Great job.

@drodNY Жыл бұрын

excellent video.. finally someone bringing us an honest inside look at these fat spoke tubeless wheels. Glad I came across this before placing my order. I am now ordering the spoke wheels with inner tubes. thanks for sharing.

@WrenchesCorner Жыл бұрын

Glad I could help out!

@jasonblume2707 2 жыл бұрын

Thanks for sharing this, I'm going through this right now with a friends 2014 Harley softail spoked tubeless wheel that I'm fixing, it has turned into a nightmare. All the Harley books show to use a rim seal kit plus valve stem assembly, but all these NY mechanics are saying don't bother with that its better to just tube it!...the rim seal kit does seem to be to risky over time, Thanks again for posting this!

@WrenchesCorner 2 жыл бұрын

Glad it helped! The only problem with a tube is that you can't plug it if you get a nail in it, but that's not really safe to do on a bike anyway. I just like to have a plug kit with me and a small pump when I go out of town just in case.

@larrylewis2556 11 ай бұрын

I will reserve my full comments on DNA 52 Spoke Wheels until I get my front wheel back from them after it was leaking directly upon delivery. Thought they may just ship them low on air so I filled the front to 36lbs and less than 20 miles later, half way through my planned ride it was going flat. This was FLAT out dangerous and a big issue with QC. Pressure check your wheels before shipping them. These are not cheep amazon or eBay knock offs and I would expect more from this company.

@WrenchesCorner 11 ай бұрын

I have seen them bad out of the box before as well. I understand your frustration. Thanks for watching and commenting!

@robertrodriguez2412 Жыл бұрын

Great work!

@WrenchesCorner Жыл бұрын

Thank you! I hope it was helpful.

@ATXjoker 2 жыл бұрын

Hey man great job, I wanted to know if that’s a 200 wide and what size tube you bought? If not what size tube would you recommend running on a 200 wide?

@WrenchesCorner 2 жыл бұрын

It wasn't a 200. What is the exact size of your tire? Is it a 16 or 18?? 200/?-? . I can let you know what size of tube to use.

@seller559 2 жыл бұрын

You mentioned this when I brought my bike in. What a mess.

@WrenchesCorner 2 жыл бұрын

Yeah. Wild huh?

@WrenchesCorner 2 жыл бұрын

Thankfully that doesn't happen too often

@westside98 2 жыл бұрын

Could they weld the spikes in. Solid. Can that solve the problem

@WrenchesCorner 2 жыл бұрын

They can't be welded because the nipples need to be able to turn so that way the wheel can be adjusted.

@edwardcloyd9437 2 ай бұрын

Do you also straighten rims that are bottomed out

@WrenchesCorner 2 ай бұрын

I don't straighten rims, but I have relaced a lot of wheels. I can replace a rim if need be.

@boxer71c55 3 ай бұрын

Can the wheel be straitened by the spokes or are they just cosmetic? Thanks.

@WrenchesCorner 3 ай бұрын

If the glue in the middle is already gone, and you are running an innertube, you should be able to adjust the spokes in theory. I have never needed to. Good luck and let me know how it goes.!

@boxer71c55 3 ай бұрын

@@WrenchesCorner I just didn’t know if they were real functional spokes or not. Thanks for answering back.

@rollinrich 4 ай бұрын

What inner tube do you recommend?

@WrenchesCorner 4 ай бұрын

I only use Drag Specialties innertubes. I have had cheaper ones pop for no apparent reason at a seam.

@pitbull3407 Жыл бұрын

i just bought a set of DNA 52 spoke. rear tire went flat at 110 mile ride at 75 MPH every spoke and nipple leaks so bad it takes 5 sec to go from 40 psi to 3 psi

@WrenchesCorner Жыл бұрын

Sorry to hear that. I don't know how they are still in business selling such a poor product.

@robbuchanan4870 2 жыл бұрын

Any idea on how old the wheels are?

@WrenchesCorner 2 жыл бұрын

I'm not sure. They couldn't have been too old.

@RobertJohnson-zx3su Жыл бұрын

Loose the Julio wheels and get Mags..Spoke wheels are high maintenance..

@WrenchesCorner Жыл бұрын

I agree 👍

@jefffox7195 Жыл бұрын

Ran with low air

@WrenchesCorner Жыл бұрын

His tire never came off the rim. I don't think it was low tire pressure. I think there was fix a flat in there that had eaten the rubber up.

@rukkuslife 2 жыл бұрын

He had to have had done something to compromise that wheel set up

@WrenchesCorner 2 жыл бұрын

Right, there was green dried up stuff that looked like fix a flat in there.

@burlyderrick4618 4 ай бұрын

I Bought Ride Wright, Worth the extra for piece of mind...... Boughgt a DNA and the the Bearing carrier failed on the Interstate.... NEVER BUY DNA RIMS!!!!

@WrenchesCorner 4 ай бұрын

I believe it! I'm glad you're ok. Just another crazy reason not to get DNA Rims.

@boxer71c55 3 ай бұрын

Can the Ride wright spokes be adjusted at all? Or just a cosmetic spoke?