Your channel makes me think nobody in my area knows how to club fit.

I'm definitely adding "not a quacker" to the long list of "Ian-isms" that have worked their way into my golf vocabulary.

When Ian gets in technical explanation mode, his passion massively comes out, like he goes into flow mode.

I knew nothing about equipment before finding TXG. Now I’m geeking on out on videos about shaft tipping and EI curves

Ian: "Hey guys, welcome back". Me: Likes video

Ian is the shaft whisperer.. he can make a golf club perform.. crazy knowledgeable..

I'm going to start using "quacker" on the course

Just bought a Ventus red velocore on eBay and found out it was tipped 1”. Had in back of my mind it was ruined and now a different shaft. You guys confirmed I have nothing to worry about. I wish there was a fitter in DFW that knew and approached fitting even half as good as Ian. Feel like I’m better off watching Ian and fitting myself than going to most “fitters” around

Guys, just wanted to say thank you for your videos, I'm a "why does that work like that" kind of person and your videos have given me an understanding of why golf is so hard to get right...😊

Would love Kuchar’s thoughts on tipping

What i have found when I've tipped my own shafts, it just makes it more consistent, just like Matt said. Loving the videos boys.

The way a properly fitted shaft helps you find the middle of the club face still makes me smile. The ball marks and wear are beginning to accumulate right in the middle. It’s impressive, if I say so myself. I can listen to you guys talk shafts all day long!

i can watch you 2 discuss technical issues like this all day. great video and explanation of tipping

Possibly there are more folks than you realize that enjoy all this techie stuff. Please keep it up as this is the only place I’ve found to get that sort of discussion.

Love this video, can't wait to see what the rest of the builders series will be like. Keep the great videos coming

"I feel "this" or I feel "that". You have to love the feedback you get from Matt. Something you can't get from a robot. Invaluable information.

So good seeing Ian’s passion on videos like this, feel like I’m learning every video.

This video shows just how high quality that the fitting service that TXG provides

Man this is great content. Have gone down the rabbit hole trying to understand my equipment, so good to have an understanding before looking at fitting upgrades

I thought shaft "tipping" was what you did when someone did a great job of fitting you.

Thanks so much guys ! I have been kinda the local club builder in my neighborhood....and only because I always played around with my own equipment !!! You both have taught me so much on the tech side, and I totally appreciate it !!! What started as me, just changing my own grips and shafts.....to all kinds of tweeks.on others gear......lol !! I pretty much do it for fun, as the guys pay for any parts !! I love this stuff and only wish I wasn't so damn old, I'd start a shop.....I'm 68 and having fun !!!

Much appreciated guys! Great test to confirm tipping is a gentle adjustment ....

Hi guys. Just wanted to say I've learned so much from you and how much I appreciate you sharing your knowledge and experiences. I understand the value of getting fitted. Only problem is there really aren't any fitters I trust in my area. I've been to 2 recently and because of you I know more than both of them combined. Needless to say I waisted both my time and money and went away empty handed. I purposely left there names out as I'm not looking to bash anyone So!!! I'm left with trying to fit myself. With a current driver, Callaway XR with 5.5 flex my swing speed is rather low @ 80 mph. I hit the heel low quite a bit (probably my swing path) using Regular flex. I'm sure this isn't helping my swing speed. I'm 65 years YOUNG and in pretty good shape. Shafts I'm looking at are Bassara Series E 42 and Tensei AV Blue 55. The heads I'm considering are Cobra Speed Zone and Speed Zone Extreme. I'm reluctant to go to Senior shaft but won't completely disregard. I do have a rather smooth tempo. I try to emulate Freddy Couples. I know thats a lofty goal. I understand there are no absolutes but I am interested in your thoughts. Thank you in advance, ScottyD

I've been wondering about this for years and now I get it! Also learned a new term - Quacker :) Thanks guys you're the best.

How does this channel not have at least 500k subs? Some of the best content around an quality delivery.

Brilliant vid!! I tipped a fujikura speeder 84g reg, 1.5 inch for my cobra f7 5 wood, best thing i ever did, exactly as said makes the head feel firmer and more in control

Having a pro launch red I have been waiting for this for a long time. Thank you guys great video guys.

Always learning something new from the lads. Keep it coming!

Interested to see these other test you mentioned. That sounds super exciting! I’m game. Complete nerd with this type of stuff

I have no idea what any of that meant but I loved it! Might need to watch it a couple more times, keep the techy videos coming!

I did it a few years ago purely out of wanting to save a shaft that had shattered at the tip. Had an inch cut off the tip and an inch extension put on and it really stabilised the shaft. Probably played better for me so from then on I decided to go x flex rather than stiff. Can see some interesting stuff coming from this video, looking forward to it!⛳🏌️👍🏼

Really interesting as always, great stuff guys.

Such a great video. awesome stuff guys

Always the best explanation of technical golf speak

So interesting. I built my 2016 M2 Kurakage x-stiff tipped 1/2 an inch, simply because I loved the feel of my friend's driver set-up. I assumed what it did, but nice to really see the technical details around it

Love the technical video guys.

Great video guys! I love the tech content

Excellent info, i was always curious about shaft tipping.

Another very interesting vid. Great stuff. thanks

Just love to see iron Mattie hit away! Thank TXG. Keep up the great work.

Great video. I would have thought the tipping would have had greater effect. Thanks gents.

I saw the title and go so excited that we might finally see Mikey in a video!

Great video! So informative.

My driver strikes tend to always be low in the face and towards the toe. Found 5his very interesting to watch, especially talking about deflection. Looking forward to seeing the video about head weight and how it influences shaft deflection.

This is so good, period.

Love this . Would be nice to see the affect of soft or hard stepping as well

LOVE this tech video!

Thank you for this video!!!

Extremely informative guys. Would love to see a video with checking the tipping of Ventus Black/Blue vs no tipping. Great video!

useful video, thank you guys

Fingers crossed we'll be seeing an SST Pureing video soon as well as that will tie in with what Ian was mentioning about the shaft drooping at impact etc. I'd love to hear what he has to say about it. Great stuff again!

These are the videos that separates you from the rest.... please more tech... txg so cal🤟🤙

Guys in my experience tipping 1.5” reduces spin while maintaining launch angle pretty close. Over a lot data that will become apparent, in my experience. Typically you wouldnt do that if you have low spin shaft or low spin head. Its usually when you need to reduce spin on a forgiving head again in my experience across 50 players i have tried it wirh.

I played Ventus black 6x tipped an inch and it was hard to hit straight. Very easy to work draws and cuts but when I need a straight ball it was never there. Went back to normal black 6x. Great video.

Nearly like Ian’s father or grandfather was a fly fishing rod fitter cuz this type of flex in the shafts is very much like a fly fishing rod. Great video lads

You guys have grown on me!

Here they come “MATTY!!! WHY DIDNT YOU PLAY THE SIM THIS YEAR?!?” 😂

Very interesting. If you ask Fujikura they say not to tip the Ventus at all but if needed 1/2 to 1 inch at most.

I could listen to these all day. Wait a minute, I usually do lol

Top notch

Cheers guys great video. Semi-related, could you guys do a video on frequency matching? And fitting customers to a specific frequency vs. fitting customer to a more general flex. I got fit 8 years ago and was told I was a 6.9. Is this still a good practice for fittings, especially irons?

This is super interesting... I hope you one day will have Mark Crossfield over and giev him a fitting session... It would make for great content on both your channels!

Love this video! Was very interesting to see that Adam Scott put the ventus red into his driver and led the field in Houston. Do you know if his ventus was tipped? Cheers!

Hi ian good video. sent you a quick note around shaft options (stock or aftermarket) to the members email. Just to finalize your recommendations. Thanks.

I've never heard "Butt stiffness" or "Butt stiff shaft" ever lol. Keep up the great work!!

Love, love, love this video! I’m getting a Tour AD IZ 7X. I want to play it at 45 inches. How would I know if I should be trimming from the butt or tip section?

Had my ventus blue tipped just a little extra for a little lower spin. This was also thought to allow me to grow into it some as i work on increasing my swing speed. Or at least thats my fitters thoughts.

Butt Soft.... basically describing me after this year of Covid go-nowhere couch sitting... (Aaaaaand I think I better stop there before making any sort of joke on some of the other terms used in this video. 😂 )

Love the shaft geek videos 👌more please 😁😁 would love to see a tipped hzrdus vs hzrdus hulk

After reviewing this again, it looks to me like the max height is the same for both shafts. Also, I think Ventus red tipped 2 inches versus black would be an interesting comparison (not that you don't already have 500 things on your plates - lol), but actually I would bet that you might not see that much difference in an in-house test - that might be more obvious after a summer of playing I think.

You may have done this already but would love to see a video where you compare a low lofted driver with high launch shaft vs high lofted driver and low launch shaft. How close would the flights get, what are the benefits of one over the other? Seems DJ is using high loft and low launch shaft

Nice to watch a fellow lefty stripe it

Out of curiosity what editing software do you use? You are really good at it!

Great video. You mentioned the standard shaft was tipped 1/2", Is that to compensate for your universal (club conex)adaptor?

Hey Guys love the video! Any chance you would be able to do a video explaining weather or not shaft extenders in irons are worth it or not? I bought a set i love but they are half inch short and i need standard or quarter inch long to make them work better for me

A blind test to see if you can tell which one is tipped would be a fun test too to see if your preconceptions are making you feel something that's not there or maybe you're reacting to those preconceptions

Great content guys. Would you recommend Butt tipping a tensei white shaft for mini driver

Hi guys, great video. Quick question when you tip do you change the kick point? I would assume yes, therefore a low kick point would be higher...for a high kick point would it be lower and add more loft? Curious to see with a High/Mid kick point if it makes a bigger difference. Thanks Marc.

*interesting* video .. 😉🏌️‍♂️⛳️🍻

Very interesting video. Have you measured the torque after tipping it? i am quite interessed to know by how much it has lowered.

Great videos guys! Do you advise to tip a Graphite Design AD DI fairwaywood shaft ?

Great stuff guys! I'd be interested in learning more about whether tipping moves a shaft from an S to X flex in the same product. For example, a tipped Ventus Blue 6-S becomes more like a Ventus Blue 6-X.

Shaft tipping is a great way to manipulate the ball flight - it seems like the OEMs don't really tip their fairway woods properly and just install as if a driver shaft. Maybe it's not true for every company, but the OEM ones almost never play 'right' compared to when I buy one, tip it per the shaft manufacturer's instructions, and build the club myself. For the longest time, TM had that shallow hosel bore as well, so it was good to pull their install and tip a little bit as well, if you wanted it to play like the same shaft in other clubs. More difficult now with the changeable tips.

I game the Ventus Black 7x tipped 1”, Mavrik head 10 degrees. I love it. I bought it second hand so I’ve never compared it to anything else. So my thought is, should I tip everything?

/Hey Ian & Matt, Have you ever done a test of Padersen Kinetix and Ballistic shafts? I watch all your vids and don't recall it. They are fantastic. Love to also see Kyle Birkshire in a TXG vid for how he fits his clubs at 140+mph club speed.

Please do the one about headweight

I’ve read in a few forums about tipping to change or influence shaft profiles but what do you when installing a shaft into an adapter? Bonded hosel vs adapter build?

I have an M4 3w that was tipped standard by taylor made and it completely changed the feel of the shaft and the head to me. I wasn’t a fan bc it made the tip too stiff for me. Live and learn

Keeping the shaft the same length by tipping it would probably not change the flex profile as much since it only shifts the “soft” point a “negligible” amount. However tipping it and playing it 1” or more shorter (cut from the butt), I hypothesize, would make a more significant difference than stock .

If a high HCP golfer want a shorter G410 with Alta CB driver, should you tip the shaft or shorten the butt end ? Or should you select a soft regular tipped vs a regular non-tipped shaft ?

Cool video, ... my gripe is with manufacturers raw length of 46" and for some that have to play shorter lengths, the gruesome amount of material that has to be taken off. Me personally, if i went with oems, .5 to 1" tip, I have to take loads off the back end, and that reduces the stiffness. I've now taken 3" from the tip sand it to fit, and take far less from the butt. Would love to see oems, make 44" and maybe even 42 raw for 3w builds. Just so it's not just flex dialing in, but we dont lose much shaft weight as well in the process.

Iain, does a shaft like Ventus black that already has a much stiffer tip section get affected more by tipping then a shaft with a softer tip section like the red? If you were to do the same tipping on the black do you think the results would be much different and what do you think the change in S3 CPM would be? Thanks!

Thank you for answering my questions ive been asking for months now lol. maybe you did see my request

Thoughts on tipping a graphite design shaft? The manufacturer says you don’t need to. Most other premium shafts I’ve looked at require at least a little bit of tipping on the instructions

Looking to upgrade TM P790Ti iron (6-GapWedge) from MMT 65R to a Padderson or Diamana Thump 95S...do I need to be concerned about changing club head weight?

Hi guys, have you tested the Ben hogan UiHi irons yet? Looking to get the 3 iron version as it seems very well priced

So does Matt run on batteries or do you plug Him in every night?

Hi guys love the video, not a fitter but I eat this stuff up. I’d like to see how tipping something like a GD tour ad iZ, where it’s got a firm butt, medium mid and firm tip. ? Cheers! Oh also I’ve heard TM always tips their shafts. Is this true and do other OEM’s do this?and why?👍🏼🇨🇦⛳️

I have my oban devotion tipped 1.5" inches in my ping G15 driver it's the best driver I've had and my favourite club in the bag whether its right for me I just know when I stand on the tee am positive I'll hit the fairway.

Matt's tempo looking smooth with this shaft