The Qidi Tech Q1 Pro FDM Printer - Simple 3D Printing Beginner's Guide

Рет қаралды 2,572

Күн бұрын

The Qidi Tech Q1 Pro 3D FDM Printer can be purchased from :
qidi3d.com/products/q1-pro-3d...
For the X-Plus 3 head over to :
qidi3d.com/products/qidi-x-pl...
Subscribe to World of Wayne at bit.ly/307c9rj
Support the channel and see the behind the scenes videos and blogs on my channel at
PATREON : / worldofwayne
KZfaq MEMBERSHIP : bit.ly/WowMembership
----------------------------------------------------------------------------------------
My Social Media, Merchandise and Amazon store can be found at :
www.linktr.ee/worldofwayne
Video Game Soldiers by Twin Musicom is licensed under a Creative Commons Attribution 4.0 license. creativecommons.org/licenses/...
Source: www.twinmusicom.org/song/295/v...
Artist: www.twinmusicom.org
#qidi #q1pro #xplus3
Take Off and Shoot a Zero by Chris Zabriskie is licensed under a Creative Commons Attribution 4.0 license. creativecommons.org/licenses/...
Source: chriszabriskie.com/stuntisland/
Artist: chriszabriskie.com/

Пікірлер: 21

@WorldofWayneUK 28 күн бұрын

If you enjoyed this video or some of my other content please consider pressing the SUBSCRIBE button and hitting the BELL next to it so you get notified when I release a new video. You will find all the links and information you want in the expanded video description. Did you know, you can now support World of Wayne by joining the channel membership program at bit.ly/WowMembership and get exclusive features for KZfaq. Alternatively, you could join my Patreon for $1 and still get access to member live streams and behind the scene news. My patreon channel can be found at www.patreon.com/worldofwayne . Thank you all for your continued support. I really appreciate it

@robinaroundtown...2194 28 күн бұрын

Well even though I'm not doing any printing of my own... You have presented this information like a true commercial spokesman... Well done sir...well done 👍👍👍👍...lol Best from across the pond mate...

@Khoomn 11 күн бұрын

Why does the background music sound like I'm watching a horror film?

@OS-RVfan 15 күн бұрын

Hi Wayne, thanks for your review. I'm wondering about the location of the filament feed through the housing in the top left rear corner (looking from the front). In all the other reviews, the tube hangs out at the back, top right (looking from behind to the back of the printer) I'm also wondering about the stop corners at the back left and right of the build plate. In the other reviews there is only one in the centre and was therefore a major point of criticism. This meant that the build plate sheet could be positioned at an angle. Have you received a new, revised/improved model from Qidi? May I ask when you received it? If so, you should definitely point out that Qidi has made improvements 🙂

@WorldofWayneUK 15 күн бұрын

All valid points but they haven't impeded me yet.

@welshpiper62 28 күн бұрын

Hi Wayne I'm in Birmingham ready 4 tomorrow's event MC, yesterday I messaged you about the Saturn 4 so with this FDM Printer one would be pretty much set up or woul you say the Saturn 4 would be enough this one look like you can get some high prints off it.cheers Mark.

@WorldofWayneUK 28 күн бұрын

Yep. You will get more detailed prints with the Saturn 4 resin printer but for large strong parts FDM is the way to go.

@julianmhall 28 күн бұрын

Hi Wayne.. a quick question. I know you can put model files on USB sticks but can you also put firmware updates on them, or do firmware updates /have/ to be downloaded direct to the printer?

@WorldofWayneUK 28 күн бұрын

Yes but in the case of this printer it's wifi connected so you can do firmware updates without leaving your seat

@markoneill4578 28 күн бұрын

Hi Wayne, doe it auto level on each builds? If that's also impressive

@WorldofWayneUK 27 күн бұрын

Yep

@gusbert 28 күн бұрын

If you are doing a printer review, please talk about the print quality, can you use any slicer or is it locked down to Qidi, what is the firmware (Klipper?), is the mainboard 32 bit, is it noisy?

@WorldofWayneUK 28 күн бұрын

I.mentioned it comes with Qidi Slicer. I'm hoping the quality speaks for itself in the pics. As for sound. I'm sure most FDM machines have the same harmonical.acoustics lol

@gusbert 27 күн бұрын

@@WorldofWayneUK OK, but is it locked down to that slicer, or can you use Cura, Prusa etc?

@WorldofWayneUK 27 күн бұрын

@gusbert tbh I love Qidinslicerbso much I haven't tried anything else. It doesnwork with Cura too as that's what I used for Vincent

@jamesmason7124 26 күн бұрын

It comes with a 2 year old locked down version of Klipper firmware but I do believe that you can upgrade to the current full version and as for the slicer, you can run the full version of Orca slicer 2 and it comes with the profile in Orca slicer, from what I have seen, it has very good print quality. I have not gotten mine yet because I am still saving up, I'm disabled and can't work anymore so it's going to take me a while