The REAL way to save a fitting! (Works everytime)

The REAL way to save a fitting! (Works everytime) | GOT2LEARN

Рет қаралды 443,542

8 жыл бұрын

This video will show you how to salvage an already glued fitting with basic tools.
Go visit Construction Fasteners & Tools for AMAZING prices on tools and equipment!
→cf-t.com/
____________________________________________________
OTHER COOL VIDEOS:
→THE 10 GREATEST PLUMBING TRICKS EVER!
• The 10 GREATEST Plumbi...
Let me know what you think by commenting and rating this video!
To become a Got2Learn Subscriber: / @got2learn
You can also follow me on Instagram and Facebook, I post pictures and videos daily of any project I am implicated in, thanks!
→ / got2learn
→ / got2learn
**Don't forget to SUBSCRIBE, LIKE & SHARE to help make the channel grow and also to be eligible to win some COOL prizes. Also, click the "BELL" icon next to the subscribe button to be notified when my next videos are released !
DISCLAIMER: Got2Learn is NOT responsible for any damage done to a property of which the plumbing wasn't done by a professional, I do not recommend doing your own plumbing if you are unsure about what you are doing, always hire a LICENSED contractor when doing any type of plumbing so you can be covered by insurances if something does happen, these videos are for entertainment purposes only!

Пікірлер: 381

@Got2Learn 8 жыл бұрын

thanks sis !!! i'll be posting another one soon !

@doncesar87 2 жыл бұрын

You saved me! Thanks for creating this video. I had a broken piece of pipe inside a really hard for source part and I needed it fixed immediately.

@Got2Learn 2 жыл бұрын

😇😇😇

@rogerbacon394 Жыл бұрын

This trick works wonders how ever it has less chances of success as the glue gets older. Working as a service plumber and having to deal with pipes that break just after the fitting i started looking for better ideas along the way and the REED clean ream extreme is an awesome tool to remove pipe from a hub end.

@Moofda Жыл бұрын

Do you have any tricks on regluing after using the reed ram bit? They're awesome, but after using it, the hub makes a much looser connection with the pipe. We tried it on some fixes on a job site but after filling the fix up with head pressure it leaked even worse. It seems to bore out the hub too much.

@rogerbacon394 Жыл бұрын

@@Moofda I haven't run into this issue without it sealing however I really over glue fittings when I've used this tool as it does fit pretty loose. I'm curious if you were working with PVC or ABS pipe. Up here in Canada we mostly work with ABS. Also the straighter you can drill the fitting the better.

@MrDmadness 7 жыл бұрын

easier to just cut one side of the pipe through to the fitting hum then use a hammer and a chisel and when you get one edge lifted just work it from there. also when re using a fitting that has been saved like this use lots of glue when re guing.

@Ironfurnaceroom 4 жыл бұрын

Loved the music with the fast forward tutorial, perfect!

@Got2Learn 4 жыл бұрын

Glad you liked it!

@katiescarlett71 4 жыл бұрын

This video saved the day. Thank you!

@Got2Learn 4 жыл бұрын

Awesome! I made another video like this one with even more info, here's the link if you have time to watch it: kzfaq.info/get/bejne/i7aqiKWp26icmqM.html

@mavenfeliciano1710 4 жыл бұрын

You just saved me. Thanks man! 🙏

@Got2Learn 4 жыл бұрын

Awesome, check out this similar video I made, lot's of good info in there too: kzfaq.info/get/bejne/i7aqiKWp26icmqM.html

@user8ZAKC1X6KC 4 жыл бұрын

You should do a video on fitting PVC pipe. I don't just mean gluing, I mean measuring and fitting complex runs. An issue I often run into is, I dry fit the whole thing, and when I glue it up, it's not the same. I think because the glue allows the pipe to slide in further or something, but, not being a plumber, I haven't quite figured this one out yet.

@Got2Learn 4 жыл бұрын

Great suggestion! To answer your question, you are exactly right! Plastic fittings such as PVC/ABS all have what we call an "interference fit" which doesn't allow the fitting to go in all the way unless there's a solvent cement (lubricant), hope this helps :)

@MrLifedriven 2 жыл бұрын

You just measure the fitting depth. I think it's a standard 1 1/4" inch depth for pvc. Multiply that x2 for each fitting end and add to your mesured pipe length from fitting end to end, then you would need to make sure the pipe is perfectly cut square on each end and that you make sure to slide in all the way. It's easier said than done, but practice makes perfect! -also not a plumber

@andrew1898 5 жыл бұрын

I mean.....ive done the same thing. But with a sawzall....heat gun works but SOME glue joints cannot be heated.

@paulmaxwell8851 7 ай бұрын

As a longtime plumber, I never make mistakes, so this video was of no use to me. By the way, it's always important to plumb alone: you don't want witnesses.

@Got2Learn 7 ай бұрын

A plumber that doesn't make mistakes is a plumber that stays home LOL.

@123ChrisG 4 ай бұрын

As a part time DIY’er i always make mistakes so this video was very useful to me! 😄

@danielmurphy7353 4 ай бұрын

❤ always plumb alone❤

@Hvac-dude 3 ай бұрын

Everyone makes mistakes I'm sure you've made a couple

@nickcaluori7342 8 жыл бұрын

Good tips great video !

@AutoANDmore 6 жыл бұрын

Hi i normally do . .. Cut pipe closer to the elbow heat whit tourch inside of pipe left and whit a flat screwdriver remove the piece of pipe left works every time and will take 40 sec . Chers . Try this one and if you like you can make a video .

@Got2Learn 6 жыл бұрын

Thanks buddy, really appreciate it ;)

@ttnnaples8060 3 жыл бұрын

😅😅Drop that little screwdriver down pipe in real-life scenario, and you are more screwed than that flathead is!

@Got2Learn 3 жыл бұрын

😆😆😆

@conqwiztadore2213 4 жыл бұрын

solid content as usual!!!!! i will do this next time i install a 4" abs WYE backwards...smh

@Got2Learn 4 жыл бұрын

Hehe, awesome, thanks buddy ;)

@sherrimorana4676 8 жыл бұрын

Great Video keep up the good work, your videos will help many people :) :)

@hannahswann747 Жыл бұрын

🤣🤣🤣🤣the music synced with final success 🎶 so funny!

@Got2Learn Жыл бұрын

😉

@sevbait 2 жыл бұрын

Thanks. Had just tried to glue in my abs flange and it was very slightly angled in the floor due to the 90 below, which threw off my level and prevented flush fit to the floor. I had to grab a claw hammer and heat gun to pry it out. Then I sanded both fittings clean and made a 1/4" shim so it would be supported and glued it in again. Worked great, but what a hassle. There was no way I was gonna make it flush without the shim preventing it from needing full insertion.

@Got2Learn 2 жыл бұрын

👌👌👌

@abczdad 5 жыл бұрын

There is a tool available you can attach to your cordless drill clutch that can be used to ream out mistakes like this. Or you could just measure twice, cut and glue once..

@michaelbaldonieri1495 2 жыл бұрын

Worked like a charm thanks for the video👍

@Got2Learn 2 жыл бұрын

🙂🙂🙂

@seanb658 7 жыл бұрын

Reusing fittings is very common. The proper method to clear a fitting of pipe is to use a Rambit. It's a special tool that drills out the existing pipe and leaves just the hub to slip new pipe into. A lot of the time its just not possible to remove the old fitting and replace it with a new one or the customer doesn't want to go to the expense of jackhammering up a floor.

@talisaswanson9777 5 жыл бұрын

Also known as a "Hub Saver" because it saves the hub of your fitting.

@johncuervo3019 5 жыл бұрын

Thanks man. I broke off the vent under my sink and it broke off right in the T fitting. There is no extra material to cut and put a cuppling or new t. It goes right into the wall into the ninty going down. There is only a quarter inch of material or less between the t and ninety

@Got2Learn 5 жыл бұрын

@john Awesome!!

@Gnefitisis Жыл бұрын

Yeah, I just use heat gun and use a new pipe as a size fit.

@_1ben 10 ай бұрын

thank you for sharing

@sherrimorana4676 8 жыл бұрын

Very bright idea...no need to be discouraged with mistakes. Your videos are always have a great solution !

@Got2Learn 8 жыл бұрын

+Sherri Morana Thank you !!

@av8dr 3 жыл бұрын

Great tip if your pipe assembly is not already installed or it'll be hard if not impossible to set up a vise.

@ianmcintosh942 Жыл бұрын

Thank you so much for the helpful how to video.

@Got2Learn Жыл бұрын

🤘🤘🤘

@ad_pico5621 Жыл бұрын

Haha the example he’s using is the absolute best case scenario for the repair…haha would work no doubt…thanks to the handy (vise, fitting is at comfortable height to work on, no obstructions around to get in your way of being able to use a blade to cut inside of that hub) haha not knocking the guy at all …but if you work on the field this probably will never happen this way! Haha…as a union plumber I swear this is by far the best setting for the repair. Cool video though 👍🏼 (when removing the inside of the old fitting inside the hub be careful with prying it piece by piece because you might crack the fitting you actually wanted to use and save and then your totally screwed! Haha. Just a heads up. Good video though

@petedude2lu3 2 жыл бұрын

hilarious. i think i will get a socket saver, although i guess if i in the field, this method is still faster than retreiving one

@DelaneyStudios 3 жыл бұрын

heat a large piece of metal before you insert it, set it let it weaken the entire joint, then use a drill with a fitting and twist it out,there is also a tool for this that can drill it out exactly. i found it. Reed Tool PPR150 Clean Ream Extreme with 3/8-Inch Hex Shaft, 1-½-Inch Head , 21pcs Hole Saw Kit Carbon Steel,Normal Wood, Plywood, Drywall, PVC Board and Plastic Plate, Hole Saws with Mandrels, Hex Key and Install Plate, Cut Diameter 3/4"-5" Full Set in Storage Box . YOU WILL SAVE A TON OF TIME AND EFFORT and fingers, imagine a tight space.

@29jcorn 3 жыл бұрын

Thanks for all of your videos! Do you have a video for saving the pipe by removing a broken fitting ?

@Got2Learn 3 жыл бұрын

You are welcome! It's basically the reverse process, you would saw the hub of the fitting, pry it off and you'd have access the to the pipe again, just need to be really careful that your not sawing into the pipe, cheers!!

@29jcorn 3 жыл бұрын

@@Got2Learn thanks for all of the tips! I appreciate it!

@HeritageFarmsTexas 3 жыл бұрын

Thanks! New follower here. After the winter storms In Texas, I have a lot of pool repairs to do and this video was very helpful.

@Got2Learn 3 жыл бұрын

Sweet, so sorry to hear about TX 🙏🙏🙏

@jerrymeeuwse4957 3 жыл бұрын

Same here my friend, Dallas area . my multiport valve froze. Busted all to hell. Lucky I had drained the pump.

@cwstewartjr1973 3 жыл бұрын

Dallas pool service guy here. Look into buying a socket saver for "2 and 1.5" best $15 you will spend. Faster than this as well

@darcymunro8930 5 жыл бұрын

Just cut the pipe short ,paint the inside with glue or primer ,then light it up ,in a few seconds it will be hot enough to pull the pipe out.

@GoogleMe-en9sg 2 ай бұрын

Maybe outside. Inside the fumes and fire will kill you, especially on a drain with gases in it.

@junangeles 2 жыл бұрын

I like the background music when you're making the art of removing the pipe from the fitting :)

@Got2Learn 2 жыл бұрын

🤣🤣🤣👌

@joseboquitasdelacoronilla7648 Жыл бұрын

thanks for your tips, but most of the time if you are under the house with limited space, and the pipe is loose in some places, and you can place your vise.. I find it dificulta to perform.

@isanBen Жыл бұрын

Awesome glue, I'm expanding my hydroponics, no, not what you think, it's just veggies, but still, I built one small system and when I decided to expand, I didn't even think about reusing/saving fittings, different glue here in Thailand, I'll try the hands on now, but I'd rather give it to someone for free 😅 30$ for 4x2m pipe, including fittings, they'll have to spend for a pump and a box tho, but worth trying, great video

@petefriesenranchland3516 2 жыл бұрын

I don’t know how old this video is but I can’t stop laughing I give him a like Mostly because of a good laugh he gave me

@4coolastickids191 4 жыл бұрын

Just a thought, why wouldn’t you use a reamer of the appropriate size for scenario #2?

@Got2Learn 4 жыл бұрын

That's just if you don't have one, I have a video coming up on that tool, stay tuned!

@muskokamike127 3 жыл бұрын

@@Got2Learn haha I guess you can ignore my comment above, I just posted "too bad there isn't a reamer or ? that could remove the glued in section" lol....

@muskokamike127 3 жыл бұрын

To be honest, what would be a great invention is if there was a reamer made for each size 1 1/4" 1 1/2" 2" etc where you cut off the offending pipe, stuck in the reamer and removed the glued in section. ABS etc is rather soft so it doesn't have to be a carbide bit, it'd help if it was self centering and limited to the right diameter. I was putting on a closet flange one time and it grabbed the second I put it on, I couldn't rotate it into position no matter how hard I tried. I mean it locked in place instantly.

@willgraves5288 2 жыл бұрын

You know that they actually make such a bit? I've had to use them twice.

@muskokamike127 2 жыл бұрын

@@willgraves5288 do you have a link? I'd be interested in seeing it/them.....thanks

@willgraves5288 2 жыл бұрын

@@muskokamike127 Jones Stephens carries them, called Socket Saver. Several videos here on youtube. I first used on a 4" stack fitting. It was expensive for a single use, but it saved my ass!

@muskokamike127 2 жыл бұрын

@@willgraves5288 cool, thanks, I'll go check them out. Proof positive that you DO learn sumthin new everyday! haha

@hardware5709 2 жыл бұрын

They are a thing already, look up pipe fitting saver, they come in a whole variety of sizes. The method shown in the video is the next best thing if you don't already have one of those bits. In my experience with my local stores, no one ever seems to have them in stock for whatever reason.

@chriscantara4585 3 жыл бұрын

A "Socket Saver" reamer would save you a time of time!!

@thesnowflakesaremelting1016 Жыл бұрын

That’s what I was wondering too

@allanmanley6340 3 жыл бұрын

I had a wash basin and stand (cabinet) fitted in my bathroom. The "genius" that fitted it cut the PVC pipe flush with the wall (gas brick - not dry wall) then discovered he could not install a bend. He then used a lot of silicone to "hold" a bend then connected the drain pipe to it (I trusted his "skill" and did not see what he had done - I am NOT a plumber etc. but am handy). A few months later I spotted water on the floor under the cabinet. Had to remove all that silicone; chisel away the wall around the pipe and I repaired his botched job. I did phone the guy to "relieve my frustration" then removed his name from my phonebook.....

@Got2Learn 3 жыл бұрын

🤦‍♂️🤦‍♂️🤦‍♂️

@andread8251 3 жыл бұрын

That’s why I am watching so many plumbing videos. Nowadays if you want something done right you have to do it yourself. Skilled tradesfolk are getting scarce.

@sionalunevans 5 жыл бұрын

use a plastic welder to heat, then jam a flathead in there works as well

@andykane4414 5 жыл бұрын

i set the inside on fire then dig out with a flathead

@jitendragawade881 4 жыл бұрын

Very helpful sir

@Got2Learn 4 жыл бұрын

Thanks!

@mannyf4478 7 жыл бұрын

uhm its called a hub saver dude. The sell them in any supply house. It drills the pipe out of the fitting without distorting it like that.

@Got2Learn 7 жыл бұрын

+manny f Well, now you know what to do if you don't have one or lost it ;)

@rsz90182 7 ай бұрын

I glued it all up going into the basement and hard to reach tub grain which should 2" but I installed a 4 in. x 4 in. x 1-1/2 in. I need to convert that into 2" can I chisel it out?

@FlipNasty1 6 ай бұрын

Reem it out... we do it all the time when toilet flanges move/shift during back fill and the pour... so we wrap the 3" with foam wrap and use offset flanges... sometimes we have apprentice chip out concrete and dig down to the fitting. Usually we just use a reem bit shave out the pipe still glued inside of the hub... works everytime... For context im a commercial plumber and we mainly do apartment complexes new construction

@PlumbingExpert 5 жыл бұрын

Good idea

@Got2Learn 5 жыл бұрын

My pleasure man, glad you liked it, don't forget to subscribe and share, it helps a lot :)

@user-ju4gp9uv2o 6 ай бұрын

I like that, when you say Hey what's up

@rojaniearienza2529 3 жыл бұрын

Heat gun works better especially when it is installed I watch and learned it from other channel too

@roundylad6386 2 жыл бұрын

Agreed........notch it, tickle it with heat, get a piece out, long nose pliers, curl and twist with tickling the heat on........works every time and you get a nice clean extraction to re prepare it

@Jussiiii3 5 жыл бұрын

Could you do any hacks on stainless Steel pipes and thread fittings

@familyplumber6743 5 жыл бұрын

For steel u can use ===> cheesel

@noxcube6439 2 жыл бұрын

Same scenario except the fitting is pvc to metal but threaded any recommandations ?.

@NoLifeJoel 4 жыл бұрын

I actually did something similar to this a few days ago. Neighbors had some PVC stuck in the T&P valve of their water heater, somebody else managed to break the pipe in a way that you couldn't screw it back out. Got a flathead screwdriver + hammer and cracked the plastic pipe off the threads.

@NoLifeJoel 4 жыл бұрын

Told them to prepare to save up for a new water heater, theirs is still going from 2003 but it's really not in the best of shape. (I live in a somewhat poor neighborhood)

@Got2Learn 4 жыл бұрын

Awesome, good job!

@ellkir1521 2 жыл бұрын

make a product called the "Rapter" Ive used it once in a really sticky situation which is the only time you would versus just cutting out a section and installing slip joints.

@Got2Learn 7 жыл бұрын

Yes it's a hacksaw blade !

@RKmndo Жыл бұрын

A heatgun can soften the glue and the inside piece. Then pull it out with visegrips.

@dannylivshitz6846 5 жыл бұрын

A chisel can be used - just peel the inner pipe apart, and this way you don't damage the outer fitting

@Got2Learn 5 жыл бұрын

That surely works too, thanks Danny!

@Jack-zt8ek Ай бұрын

How do you clean the messy fitting up before reusing it? Looks like lots of glue and such remains.

@leach713 5 жыл бұрын

You made it look so easy ok I can count all the time I broke the hub ,anyways I like to use a long flat head and thinner one too

@Got2Learn 5 жыл бұрын

Thanks! It doesn't always work out that easy ;)

@familyplumber6743 5 жыл бұрын

Because u want took fast to remove Remove with love slowly slowly

@mahdimahdavi541 2 жыл бұрын

you just saved my ass . thanks !!!

@Got2Learn 2 жыл бұрын

🤘🤘🤘

@OSGCourtWatch 2 жыл бұрын

Heat it up and twist it out with pliers...

@cristianmunoz2480 5 жыл бұрын

Cut the pipe flush with the fitting then cut a small portion about half an inch on the pipe then pry that little piece off with a screw driver then continue hitting your flathead in between the pipe and fitting all the way around until that piece eventually comes all the way off

@Got2Learn 5 жыл бұрын

Thanks for your input buddy, appreciate it ;)

@cristianmunoz2480 5 жыл бұрын

@@Got2Learn yeah man I know you know what you're doing I was just saying the way I do it. Good to see how big your channel has grown I remember back when you first started.

@Got2Learn 5 жыл бұрын

Hey that's what this channel is all about, learning! Yeah the channel grew a lot in the past year, it's truely impressive!

@merrilllester 4 жыл бұрын

I have a 1 3/4 inch pipe that comes from my well and hooks to a tee. One goes up to a hose bib and the other end goes down to and other pipe. It broke off at the edge of the tee. I can't put it in a vise. How can I remove the broken piece. It has been in there for fifteen years. Thanks for any suggestions.

@Got2Learn 4 жыл бұрын

This might help you: kzfaq.info/get/bejne/i7aqiKWp26icmqM.html

@JRCoronado24 4 жыл бұрын

Hi, Speaking of fittings, what do you think about studor vents for kitchen sinks?

@Got2Learn 4 жыл бұрын

They work, but they should be your very last option. Before using one of these, you should either do a loop vent or try to connect to a future vent that the builders left, if they did.

@JRCoronado24 4 жыл бұрын

@@Got2Learn I just tore my drywall and added a air vent before adding cabinets and regretting later thanks.

@Got2Learn 4 жыл бұрын

YEah, if you do install these, they MUST remain accessible.

@andrii3810 Жыл бұрын

I can tell that removing it as shown in this video is HELL. I've ordered rambit / fitter/socket saver bit. Let's see how it performs

@theblys 6 жыл бұрын

If you would have put some pipe solvent on the inside of the pipe to be removed and lit it on fire it will soften the glue and you could of pulled the pipe right out. Saved yourself a load of time.

@antoniogalluccio4213 Жыл бұрын

That fitting wasn't ready to get a new pipe in. I believe you need to send it down properly first right? What do you use?

@dvach6352 2 жыл бұрын

suprised the fitting doesn't split on you when you drive the flathead inbetween the piece and the fitting. happens every time to me

@Got2Learn 2 жыл бұрын

it happens!

@dann8902 5 ай бұрын

Did this on a 12" sch80 flange on a return line from a cooling tower it took àlmost 4hrs

@bipedalbob 5 жыл бұрын

Another good tip that saves the day when there is no other way, did not know this was possible I thought once the glue sets.

@Got2Learn 5 жыл бұрын

;)

@howardiko7156 4 жыл бұрын

Hey there is a tool. There is always a tool. It works like an automotive Ridge Reamer and will save you all the stress and can re use the fitting without a leak.

@dwell771 4 жыл бұрын

hey Howard where can I find such a tool may want to try it

@howardiko7156 4 жыл бұрын

They are on Amizon. Everything is on Amizon. Got 2 one in 2 inch and one 1 1/2.

@dwell771 4 жыл бұрын

@@howardiko7156 thx good to know

@howardiko7156 4 жыл бұрын

@@dwell771 did you find IT? fun fact is it will trim off the pipe from the saw cut. Makes it so square and clean. Wish I could remember what its called. Cost a lot $75 or so but well worth it.

@geecee9770 3 жыл бұрын

@@howardiko7156 socket saver?

@barbaramorana2151 8 жыл бұрын

Very good tip especially for plumbers!!! Thank you !!!! Good job!!!

@throttle_therapy_6598 4 ай бұрын

Next time heat it and it’ll peel right out I’ve done it to approximately 5 year old existing and it worked the biggest thing is you want enough heat to melt the glue but not enough to burn or warm the pvc

@zechariah1398 3 жыл бұрын

I would have to consider the cost of the fitting verses the labor time. If I didn't have another fitting I'd have to weigh the time to go get one verses the time to recover the one. Even if you're working on a home project you still should consider your time...

@Got2Learn 3 жыл бұрын

Yeah this is for when the stores are closed as mentioned in the video.

@TheSeraphim75 7 жыл бұрын

Just heat the inner piper with a heat gun and you can pry it off easily with a needle nose plier.

@Got2Learn 7 жыл бұрын

TheSeraphim75 i'll give it a try !!

@MrDmadness 7 жыл бұрын

you then wreck the fitting you are trying to save, pvc over 140 degrees starts to deteriorate... it does work but this is not ideal at all.

@Got2Learn 7 жыл бұрын

That's another way that works well, I use it sometimes, thanks for the input MrDmadness ;)

@Got2Learn 7 жыл бұрын

Thank you Mrdmadness ;)

@Got2Learn 7 жыл бұрын

brian kirkbride Me too, I think I'll include this technique in my next plumbing video.

@ElliotBrownJingles 7 жыл бұрын

Is that a hacksaw blade?

@jackknife4102 7 жыл бұрын

Can anyone tell me what kind of prep I need to do to re-use? my problem isn't getting the fitting apart, but I have concerns about re-gluing. Mine came out quite a bit cleaner than that one.

@Got2Learn 7 жыл бұрын

Jack Crichton I'd suggest sanding any bumps and valleys and put lots of glue both on the fitting and the pipe ;)

@jackknife4102 7 жыл бұрын

Got2Learn Thanks for the lightning quick response!! Thumbs up and subscribed!!

@Got2Learn 7 жыл бұрын

Jack Crichton If you have any questions I am always available !

@tandemwings4733 6 жыл бұрын

You can. Just apply liberal glue (cement if you prefer to call it) then wipe with steel wool, or scrape with a knife, and repeat until clean

@fatguyonagrom9515 Жыл бұрын

Couple of things. 1. I would've used the Recipricating Saw instead of working myself too much with the Hacksaw Blade. 2. Screwdrivers aren't Chisels (Guilty of that myself). 3. Hub Savers are Awesome (Essentially they're Drill Bits that have guides made onto them that drill the pipe out of the fitting) and come in just about all sizes for cheap. But if you're roughing it this technique will work.

@anonymousbyproxy8250 3 жыл бұрын

What album the music is from ?!? Is that from Kevin MacLeod’s works ?!?

@IGoProEVERYTHING 2 жыл бұрын

Have you bought socket savers yet? If so, what brand?

@Got2Learn 2 жыл бұрын

kzfaq.info/get/bejne/i7aqiKWp26icmqM.html

@seanbranson1358 3 жыл бұрын

Whats your opinion of the Pipe Parana ?

@Got2Learn 3 жыл бұрын

Never tried it, anyone??

@jp-ty1vd Жыл бұрын

personally I just cut the fitting out replace with new one and use collars to attach. 4 me easier and faster. I always but xtra fittings n stuff: u can always return any unused parts.

@JustAnAcre Жыл бұрын

How do you save the pipe and not the fitting?

@Got2Learn Жыл бұрын

Full video on this: kzfaq.info/get/bejne/i7aqiKWp26icmqM.html&ab_channel=Got2Learn

@FlipNasty1 6 ай бұрын

That corzan schedule 30 (cpvc) is hard stuff

@Got2Learn 6 ай бұрын

Yes!

@irvingbilly3334 Жыл бұрын

Reed make a drill bit just for this.

@SonicOrbStudios Жыл бұрын

RAM bit is much easier and cuts inside the pipe fitting

@Vinlyguyx420x Жыл бұрын

Lmfao the sad music that comes on 😂

@Got2Learn Жыл бұрын

🤣🤣🤣

@samsen3965 2 жыл бұрын

I have a problem. My home has swedge metal line with a diameter of 2.5 inches. I need to change a rotten section under a shower that is a p shape loop. I can not find any 2.5 inch PVC or ABC pipe on the market. No such size exist or I can not find it. What should I do?

@Got2Learn 2 жыл бұрын

You'll need to use a Fernco or reducing rubber clip and use 2" pipe instead.

@samsen3965 2 жыл бұрын

@@Got2Learn 🙏🙏 My HomeDepot doesn't have it. By any chance, do you have a link to any seller?

@Got2Learn 2 жыл бұрын

@@samsen3965 might wanna try a plumbing shop for those

@samsen3965 2 жыл бұрын

@@Got2Learn Thanks. Seems there are some on eBay but they are referred to as 63mm to 75mm (Some from sellers in UK).

@blackmass1082 7 ай бұрын

When that PVC adhesive is applied, 2 becomes one, there is no seperating even one into a re-useable state.

@archangels4you593 3 жыл бұрын

Why not apply heat to make it easier?

@bobm1052 5 жыл бұрын

I did this. Pool pipes. I proved to myself that one could freely enter hell, then later return to the regular world. They didn't play the perfect music like you did though.

@Got2Learn 5 жыл бұрын

Hahaaaa, good job buddy...a little music does help though ;) @bob m

@bobm1052 5 жыл бұрын

@@Got2Learn how do I ask a question, without posting it in comments, please

@Got2Learn 5 жыл бұрын

Try the KZfaq Community tab when you are on my main page.

@Eastbaypisces Жыл бұрын

@@Got2Learn is there a smaller brush for abs cement for hard to reach areas where normal brush won't go around?

@Got2Learn Жыл бұрын

@@Eastbaypisces dunno of a smaller brush than the one that is soldered to the cap.

@anthonygamer9000 3 жыл бұрын

if your re plumbing something don't thro the fitting away keep it and use this skill to save some money if its a broke fitting then thro it away as you cant save it.

@CuttinInIdaho Жыл бұрын

A heat gun and channel locks is much faster and you don't have to cut out the piece of pipe in several areas.

@Got2Learn Жыл бұрын

This deforms the fitting.

@CuttinInIdaho Жыл бұрын

@@Got2Learn it doesn't unless someone is an ape. you heat from the inside of the fitting

@Got2Learn Жыл бұрын

Sure! 🤜🤛

@johne421905 Жыл бұрын

I glued abs to pvc using abs glue, what are the consequences?

@Keuken4life 3 жыл бұрын

You must heat de glu to take it apart

@fatcat-hc4pj 7 жыл бұрын

hasn't anyone heard of tool called a socket or hub saver will drill that out in about 20 seconds

@Got2Learn 7 жыл бұрын

fatcat007 007 Yes, I've heard of it, it's a great tool, the only thing is that it's not always readily available lol.

@fatcat-hc4pj 7 жыл бұрын

Got2Learn. tried your method in video one time under a kitchen sink ended up breaking the hub on the fitting so after cutting a hole in cabinet and wall to fix invested in a set hub savers every size they never leave the van.

@Got2Learn 7 жыл бұрын

that's the best, no doubt ;)

@caryvandergucht6818 6 жыл бұрын

Where's your sense of adventure😜

@gordom3492 5 жыл бұрын

Awesome tool and every plumber should have it I've got from 11/2 to 4" and there cheap.

@tedbear8168 2 жыл бұрын

Are we going to ignore the fact you would have been screwed when you knocked that screwdriver down the pipe if it wasn't on a vise xD

@lindam.9282 5 жыл бұрын

Acetone works, also. Only takes a couple minutes for it to loosen the pipe glue, then twist it out. Easier yet use the pipe wrench after the glue is softened. At least it worked for me.

@Got2Learn 5 жыл бұрын

What kinda pipe/glue did that work on ?

@lindam.9282 5 жыл бұрын

I got mine from Lowes. It's Oatey all purpose cement and their purple primer Don't let it sit on the pvc for too long, it will dissolve the pvc. I wash it off immediately after removing the pipe.

@Got2Play 5 жыл бұрын

I'll give it a try and maybe make a video on it, thanks buddy ;)

@lindam.9282 5 жыл бұрын

I'll be watching to see if it works for you!! Always ready to live and learn new things. Your way works too.

@Got2Play 5 жыл бұрын

;)

@GemmyHeart Жыл бұрын

Main products: sealing gasket,gland packing,PTFE/graphite/asbestos products, ceramic fiber products, high temperature heat insulation and fireproof material. Free technical support (sealing, heat preservation, heat insulation, fire prevention problems) All products 1 piece can also be customized, 30 years of service experience, fast and safe shipping anywhere.😇