The Right Way to Install a Start Stop Button (EASYGUARD EC004)

No video

The Right Way to Install a Start Stop Button (EASYGUARD EC004)

Рет қаралды 186,504

Күн бұрын

If you would like to help support the channel and project Evo, you can click the link below:
www.paypal.com...
This is the proper way to install a push to start button, in any car.
This is a tutorial of a push to start system installation which can be purchased from Amazon.com for $32.99. If you have any questions, please feel free to ask in the comments section, and I will try my best to answer them. Links in the description.
By shopping on Amazon.com via this link, you'll become 5x cooler 😎 (but seriously...if you'd like to support the channel at no cost to you, just use this link to shop on Amazon 😁)
👇👇👇👇
amzn.to/2GaYHZg
Products & Tools used in this video:-
- www.amazon.com...
Start - Stop button Kit (USA):-
amzn.to/2GWuZLw
Start - Stop button kit (UK):-
amzn.to/2NFscH4
Immobilizer Bypass Module:-
amzn.to/2VwnduK
Multimeter:-
amzn.to/2T7lhfw
Heatgun:-
www.amazon.com...
Website for wiring diagrams:-
- goo.gl/W3L4xO
For any business matters, contact me on my email address: paulsamaroo@gmail.com
Music:
Alasen - Abyss (Copyright Free Trap)
• Alasen - Abyss (Copyri...
Alasen:
● / alasen
● / icemantrap
● / icemanbass
● / therealfrozenguy
OCTILARY - CHILL TRAP BEAT | No Copyright Trap
• OCTILARY - CHILL TRAP ...
OCTILARY
www.youtube.co....
/ octilary
/ octilary482
/ octilary
Disclaimer:
Due to factors beyond the control of The Auto DIY Guy, the improper implementation, use or unauthorized modification of the information provided in this video cannot be prevented. The Auto DIY Guy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. The information displayed is to be used at your own risk. The Auto DIY Guy recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of The Auto DIY Guy, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not The Auto DIY Guy.

Пікірлер: 279

@matthewjenkins1161 5 жыл бұрын

Disabling the factory immobiliser to rely on that little black box is crazy. Factory immobilisers are nearly impossible to bypass without the chipped key, but the little black box you now rely on is easy to find at end of ignition loom and bypass.

@srujana1994 5 жыл бұрын

'Basically' the coolest thing I've seen all day

@nathanthomas8482 Жыл бұрын

Subbed I love supporting the smaller not small guys

@dansmith7617 2 жыл бұрын

Thank you for this video. Very easy to follow and you went through each wire logically and precisely. Much better than others I've seen. Makes sense now! -Dan

@iglesiasanta761 3 жыл бұрын

I know this video is a few years back but thankyou for showing me how to install... Just have to remember that the ECU will change.

@lalhlupuiihnamte7880 4 жыл бұрын

Mine works with only the key wiring,brake wire,indicator wire and ground wires. Afraid if it would later on cause a problem. Very helpful video, best one so far. thanks

@evocre8r 5 жыл бұрын

Great video as always. I have this installed in my Acura TL but now I'm looking to install the PKE system.

@eddiesuertefelipe1532 4 жыл бұрын

You don't need that kit to bypass mobilizer. All you need is a 1 - 1.5m long 22-18 awg insulated wire (so it is not bulky). Short circuit both end wire and wrap it in both barrel and your working key (around the plastic part not on the metal). About 4-5 turns in barrel and key. As simple as that.

@fusionbolt77 3 жыл бұрын

Instead of making holes in the wires, it helps to have alligator clip probes for your multimeter, pretty cheap to buy if you have a multimeter with plug-in type probes.

@Goldenplumbus96 4 жыл бұрын

Totally installing this Into my 2010 fusion

@dashtyATG 3 жыл бұрын

Bad boy perfectly explained. Big kurdish thanks.

@rakeshmohussur7465 3 жыл бұрын

I got same on my car its a nissan sunny n16 after the engine starts it's keep my starter motor running a little bit more

@mysticalovadoseent1857 3 жыл бұрын

Same thing am experiencing

@BNaresh868 3 жыл бұрын

I knew you were a Trini when i heard you say "bend back" lolol

@TheAutoDIYGuy 3 жыл бұрын

lmaooo

@colecampbell8357 5 жыл бұрын

Wow. Truly the best tutorial I have ever seen

@franciscogonzalez9953 3 ай бұрын

Thanks 👍

@MobehTaBlues 3 жыл бұрын

Wish you were in the COLORADO...EVERY TECH I HAVE BEEN TO HERE IOS SCARED TO INSTALL THIS ITEM

@thilakaratnepunchihewa7230 3 жыл бұрын

Great for your Explain , Thanks

@ShahAlam-gd9ut 5 жыл бұрын

Make a video on installation of tachometer,air temperature gauge n other gauges please 🙈❣️

@kalyanmandal9602 3 жыл бұрын

Very good video. Thank you.

@ShahAlam-gd9ut 5 жыл бұрын

I own Mitsubishi cedia this video helped me a lot bruh❣️

@you_tuberrr 5 жыл бұрын

Did your steering wheel locks after installation

@nicholashanse5040 2 жыл бұрын

Thank you for this video. Tell would I be able to install this on my 2019 Volkswagen Polo Vivo Comfortline?

@DrJorgesanchez 4 жыл бұрын

Great video, thank you!

@dashtyATG 3 жыл бұрын

Good job chap thank you.

@TheAutoDIYGuy 3 жыл бұрын

Thank you for watching!

@indianfrends2386 3 жыл бұрын

Great video

@shkoohi1992 4 жыл бұрын

Thanks for this! I installed this on my peugept 206, but the issue is that it only turns the car on if the physical key is in the ignition positions, and only turns it off when it is taken off ignition. Any idea what can cause this?

@TheAutoDIYGuy 4 жыл бұрын

Shervin Koohi did you disconnect the wires from the back of the ignition lock cylinder?

@alidelrosario 3 жыл бұрын

Same thing with my 1991 toyota celica gt. Fid you fix yours? What did you do? I need your input. pls help me.

@Develope51 5 жыл бұрын

Thank u man ! Good video!

@joeldrealtor 2 жыл бұрын

Why the spare key needs to be cutted off and leave in the ignition? Why it’s needs to be on acc position? It can drain the battery.

@makeIT_makeSENSE 4 жыл бұрын

Thank you very much

@Adultz94 2 жыл бұрын

how has this held up nearly 3 years later? most negative reviews all seem to say they work in the beginning but then dont work right later

@tubpheejteblauj4828 4 жыл бұрын

Could you do one for an Easyguard 2 way car alarm system? I just got one, but it looks more complicated than I can understand.

@TheAutoDIYGuy 3 жыл бұрын

You can follow my PKE alarm system tutorial where I install an EASYGUARD PKE alarm system with start stop button. Let me know if that helps 😊

@zopeso1451 4 жыл бұрын

So you still have to have the key inserted in the ignition

@internetlivestream1 4 жыл бұрын

nice video thanks

@blakeyoung7113 Жыл бұрын

Quarter of the way through video sound stops

@angelcaldera3360 8 ай бұрын

your videos are great. I installed the easyguard ec003 in a 2016 kia sorento, but I cannot identify the door opening and closing cables, the flashing light cable, the courtesy light cable and the trunk. Do you know where I can buy the Kia Sorento manual?

@KnowledgeLifestream 5 жыл бұрын

Nice job 👍

@TreeLovinAdventures 2 жыл бұрын

Question for you. Do both the blue ring and the red engine start buttons stay lit while driving?

@captainfresh08 Жыл бұрын

Would you still need an immobilizer bypass or to wrap the ignition wire, if you're putting the original key in the ignition and then cutting it off, or like my Honda you can unscrew it. Then you would have the steering column unlocked and the original key in the ignition so the factory immobilizer would work fine

@ronoldmyres929 Ай бұрын

If the hand brake wire is not connected can the key fob start the car

@greatdane23 4 жыл бұрын

Good video, Want to get this for my 2007 Sportero , I wouldnt need that bypass then right?

@snlsp12 3 жыл бұрын

key sud stay inside the car is a catch

@blackstarafro2 2 жыл бұрын

You install looked very similar to how car starters were installed, in where you had to give up a key. I wonder if this install can be done with an alternate bypass module? So then if the battery in the transponder dies. You can just put you key in and start your ignition?

@oninmallorca2329 4 жыл бұрын

Nice video! But how about the safety features of the car like shift lock? Would it be compromised? Thanks

@TheAutoDIYGuy 4 жыл бұрын

Unfortunately it would be compromised yes.

@bjdiaz7623 10 ай бұрын

Can you help me out here. I've got it where the car will turnover and almost start but the dies. What could be some possibilities

@ArtemisKitty 4 жыл бұрын

Couldn't you just jump the 2 wires together behind the ignition to put it in accessory mode, rather than leaving a sawed-off key in it? Otherwise all they're going to need to steal the car is a way to turn it - like a basic screwdriver or pair of needlenose pliers? (Since the wires aren't disconnected or anything like that, it's still live and functional, right?)

@je-voughnmcgregor5929 2 жыл бұрын

still need that blue transponder

@ArtemisKitty 2 жыл бұрын

@@je-voughnmcgregor5929 ...But the key is sawed off. The transponder chips are in the plastic head of the key, which is cut off, so I assume it's been accounted for/rendered unnecessary?

@blackshelbygt500kr 4 жыл бұрын

Can I leave the RFID tag in place and bypass the RFID part?

@jameswan670 5 жыл бұрын

Hi Bro. your videos are very useful. Are you still in India now? I hope your KZfaq activity will be more frequent.

@m.a.a.2089 4 жыл бұрын

I installed and the car starts but the shift lever stucked on park. It will only release if put the key on the ignition to run position

@TheAutoDIYGuy 4 жыл бұрын

you need to remove your ignition key barrel. Please check kzfaq.info/get/bejne/orulfMugzLGYp6s.html to see how it's done.

@nickhaley1212 3 жыл бұрын

Remove your barrel or put your key in the ignition then turn it in the on position then cut your key head off and leave it there that's what the original instructions tell you to do. And Use a spare key lol

@zackarysmith3979 5 жыл бұрын

I wanna install this in my 99 f150 4x4 cuz my lock cylinder is fucked and I think itll be pretty sweet to have one

@rshinn8776 Жыл бұрын

So you disconnect the ignition harness from the cylinder since you have a key in there turned to 'on'?

@ramon9967 Жыл бұрын

How do you hotwire my mustang because I got too much problems with it and I'm trying to run it off the same thing you show but to hotwire without messing anything up

@Johnny-zw8qq 4 жыл бұрын

Nice video, but will this kit work for a 2018 Toyota Tundra?

@freeshavacado7378 5 жыл бұрын

This all seems nice to do but what has been your experience with the longevity of the product(s)? How long have you had the push buttons on and have you had any issues?

@TheAutoDIYGuy 5 жыл бұрын

So far, it lasts long, once you install correctly. 😉

@michaelpacker9805 4 жыл бұрын

Great video thanks! I had a thought, i was wondering if you could use this and the 'passive keyless' transponder system as one unit? Since I do not enjoy the blue RF fob on this, can you tie this system with that and create one ecosystem? Walk up to the car, it unlocks, then sit inside the car and push start car all using the one 'keyless' fob inside your pocket. Is this possible?

@TheAutoDIYGuy 4 жыл бұрын

Hey bud, please see this video kzfaq.info/get/bejne/h7pdi9B32quro6s.html

@MrSugarRaye 10 ай бұрын

Can you help me?. Installing on a 1993 corolla. My constant power is am1 and am2. Should i bridge both and attach it to the module power wire?

@krsleee 3 жыл бұрын

I am installing on a old Ford Mustang (1970). For ignition switch has 2 proof wires. They put a temp ground on things like the brake lights. What should I do with those wires?

@richardgibbs00 2 жыл бұрын

bro how do i go about testing the door unlock and lock if its positive or negative. and also for the door switch. where do you plug the wire for the confirmation for lights

@ravinflorenso6948 Жыл бұрын

Hi, dear sir please tell me, the key not automatically open dors or close when i away from car, how can i fix it?!

@kingjayy3936 2 жыл бұрын

Just installed in my 02 silverado 1500 nothing lights up on dash and want start????

@nak141 4 жыл бұрын

Can this be installed in 2020 kia sportage. Most of the electrician don't recommend to fiddle with the security settings.

@johnmurunga3901 5 жыл бұрын

Hi, i have two wires labelled AM1 and AM2 which I believe from my tests are the power lines. I also have IG1 and IG2 , then ST1 and ST2 and ACC. when i follow your video I t leaves out two of this cables from the original key start. the engine cranks but does not start. thanks in advance for your input

@overtimeplaya4188 3 жыл бұрын

Thanks for the vid I installed my starter wire into both of my starter wire and it worked, but when I start my car it gets a little loud is that normal?

@TheAutoDIYGuy 3 жыл бұрын

Hmmm 🤔 “loud” as in the car revs higher? The start stop button’s job is to just do the job of the ignition lock cylinder. Nothing more nothing less

@deenoe1979 2 жыл бұрын

How do you unlock / lock the car? The central Locking?

@I2etributi0n Жыл бұрын

Is the immobilizer bypass completely necessary? Couldn't the factory immobilizer reader just be removed from the ignition switch and relocated with the transponder attached to it the same way you put the key with the bypass unit?

@twobrothersgarage5190 3 жыл бұрын

may i ask you a question, how to identify the ignition 1, wire and ignation 2 wire using a multi tester tnx

@francomartin5388 8 ай бұрын

Friend, I have a big doubt and a question if you can help me. My car has a remote start with an original factory key and I can start it remotely from my house with its key. I am going to use 2 keys with a chip, one for the chip that will always be placed in the ignition antenna (to be able to enable the button that I am going to install) and the other as a spare to be able to start the car remotely. My question is: will the copy of my other key with a chip work to start the car remotely from the house once the button and a permanent chip in the antenna are installed? Greetings

@arizyerick1 Жыл бұрын

I installed push start, tried it and it turned on but couldn't move vehicle because of key cylinder so I removed the whole thing to be able to move the car but when I tried to turn it on again it only cranks and won't turn on help.

@ChamisVlogz 2 жыл бұрын

What if my car has a Advanced key push start system. I’m trying to install this easy guard??

@tommyho6437 2 жыл бұрын

Do I need a physical key in the lock/start for it to start the car?

@rodrickanderson1958 3 жыл бұрын

How would I put the exact same START/STOP Button on My 2006 Kawasaki ZZR 600

@arleevaliente3099 4 жыл бұрын

I also install like that the plug and play kit, but the problem is I con’t lock and unlock the doors when the engine turn off.. I hope that u can help me mahalo 🤙

@samuelmorgado3274 3 жыл бұрын

My car has 3 cables that get power when i put the switch in ON position, do i need to parallel them to the ON line together?

@hanielbomb 5 жыл бұрын

Brother one of these was install on my car n it caught on fire. One cable was burning. Do you think it was the installer? Was fixed and return back to using key. Was told was the wiring that used a thin wire they need be thicker one. It this true?

@TheAutoDIYGuy 5 жыл бұрын

oh interesting; it works fine for me after many years; which vehicle do you have? Year and model

@hanielbomb 5 жыл бұрын

The Auto DIY Guy 2002 Toyota celica Gt auto

@hanielbomb 5 жыл бұрын

Would you say bad wiring done!!?

@TheAutoDIYGuy 5 жыл бұрын

@@hanielbomb yes it would seem so.

@hanielbomb 5 жыл бұрын

The Auto DIY Guy thank you. Cause i plan on buying another one Cause I like the push to start feature. Which one would you suggest,?? One that has passive key. Entrance. Thank you. Also where do I get the wiring diagram, does it come in the box like yours did???

@tusharkantihansdah 5 жыл бұрын

What is the range of RFID tag

@EasyFLtutorials Жыл бұрын

The audio cut out

@richardgibbs00 2 жыл бұрын

Quick question. Why does the easyguard flash the lighta 5 times after unlocking

@drezr 2 жыл бұрын

How will this work when my car has a automatic lock steering?

@mervyngregoire5435 2 жыл бұрын

I have a question…if my car have a wheel steering lock,will it still work after installation?

@JWard2 2 жыл бұрын

What sucks is having to put my foot on the brake to turn it off. How do we bypass this?

@kk1969rob 3 жыл бұрын

I have a scion tv 09 I need to know which color wire from my car to connect to easy push start button

@ephreimpangilinan402 5 жыл бұрын

Hi, appreciate all your guides for the push button/PKE system but I was hoping you can help out. I have a 2001 Toyota Corolla and the ignition wiring harness has 6 wires. Based on the key position, this is what I've gathered. * "(+)" means they are connected* Off: White = 12 V cons; and BlackRed = 12 V cons Acc: White (+) BlueRed On: White (+) BlueRed (+) BlackYellow; and at the same time BlackRed (+) BlackWhite Start: White (+) BlackYellow *BlueRed is disconnected*; and at the same time BlackWhite (+) BlackRed (+) Red So, I have two 12 V cons: White (which seems to be for high current ACC) and BlackRed (which seems to be mainly for starting the engine,). Should I connect them together to the Red cons 12V from the kit? ACC wire must be BlueRed Start wire must be Red Now I get confused with the ignition ON wires. ON#1 is always powered even when cranking the engine, while ON#2 gets cut off while cranking the engine. I'm not sure which of BlackYellow and BlackWhite is ON#1 or ON#2 Thank you.

@michaelallen2360 Жыл бұрын

Has anyone figured out how to get the damn thing into programming mode?? I need to prolong to remote crank but can't figure it out.

@uptownsfinest1598 5 жыл бұрын

I had installed one and the car stood on like if I had it on1 position how how do I get to turn off.. This is my wire diagram for my car can you tell me which wires I put together like you did. Because when I did it my car stays on 12v constant wire - pink black & red Starter wire - yellow Ignition wire - blue Second ignition wire - green/red Accessory wire- black & orange Second accessory wire - black & white

@dimuthhettiarachchi6056 3 жыл бұрын

Please someone explain this to me; I don't have key in my ignition switch, but there two wires showing 12V. one is constant 12V wire, and other should be?

@ablebabu 4 жыл бұрын

Can we remove the immobilizer after some time??does the car starts??

@sudhanshupatel5246 4 жыл бұрын

i have installed all wires correctly but my car lock key is not working from remote.... i think its coz of i have cut my other key and insert in steering lock to unlock the steering.... plz help

@iglesiasanta761 3 жыл бұрын

Also, leaving it on Accessorie, will it drain my battery?

@TheAutoDIYGuy 3 жыл бұрын

it won't because you'll be disconnecting the wires corresponding to it. The purpose of putting key in ACC position is to disengage the steering lock. Hope this helps!

@kendas2608 4 жыл бұрын

Thank you for the tutorial, ......... if the starter is not strong enough why is that, bro? But if you return it using the default key, can the starter ... guess what?

@felixanuncio9471 4 жыл бұрын

ive experienced it too but i found out that i have 2 12v power lines so i connected both to the harness

@scobbybizkid Жыл бұрын

What’s the range on that transponder , do you need to have it inches from the ring as you showed or can it be in your pocket like a factory press start/ stop ?

@TheAutoDIYGuy Жыл бұрын

Only inches away…if you’d like to achieve what you’re asking, you’d need to install a Passive Keyless Entry system. I’ve done a couple videos on this, so you can check them out if you’d like 😊

@crazysquirrel9425 3 жыл бұрын

How does it lock the steering when when you shut it off??

@elvisherbert7078 3 жыл бұрын

Will this work if my transponder ring is broken

@SkodaFeliciaBMMkWpredfacelifte 4 жыл бұрын

What is the difference in function between white and brown wire?

@XellosMetallium Жыл бұрын

dude i got everything else working except door lock/unlock. i have to carry the original carfob to lock&unlock the doors. Then i have to use the new fob to reactivate the car and disactivate the car. I found the wire for lock/unlock with the light pen. but its not working as intended. is there a different wire for remote lock/unlock? because what i found was the wire to the door lock buttons.

@borojelic5611 3 жыл бұрын

please help .... what is the arrangement of the wires in the ignition lock of the bmw e53 ?, that is - which is the wire for acc, which for position 1, which for position 2, which for ignition?

@alexpenamartinez2995 2 жыл бұрын

Have a 2000 Lexus ES 300 does it need a bypass or no?

@jso567 4 жыл бұрын

question about the immobilizer bypass module is that specific the easyguard or will it work with and PKE w/ push to start because i have 2010 f150 with chip key

@tucafedehoy1650 3 жыл бұрын

My car has 1wire (ACC) and 3 wire (On) can I connect 3 wire (on) in yhe white wire, they keep electricity when I put on and start the car, I think 2 of 3 are the car air and windows... could I connect toghether?

@lskbiohazard 2 жыл бұрын

Tendrás el manual para reprogramar las tarjetas rfid?

@matttorrey4835 Жыл бұрын

I have a question- does any immobilizer that is used with the system have to connect directly to the Easy Guard module? If so, how does it connect? Or can an immobilizer just be installed in the ignition wiring, but separate from the easy guard unit?

@TheAutoDIYGuy Жыл бұрын

I’ll reach out to the manufacturer, and once I get a response, I’d post it here