That's cute. You don't have any grass to cut.

could always start a landscaping and "Honey-do" channel called "Mowtonosity"

did I seriously just watch someone mow their lawn as content. Well played Motonosity well played.

People please like this so he can see it... If the tail light falls off again, make small abrasions on the rear plastics and on the light housing itself before you glue. It will make more surface area and a stronger bond.

I use a manual mower. Good cardio! 🐢☠️

Here’s how to change your counter shaft seal the easy way: The manual wants you to split the cases and all this craziness; however there is a much quicker way. If you lean the bike over on its right side (exhaust side), ideally up against a wall, but with a steep lean angle, all the engine case oil will shift to that slide. What this does is give you the ability to remove the seal without oil pouring out while you attempt to change the seal, and or having to do an oil change just to replace the seal. Once you’ve got the bike up against a wall, you can remove the shifter. What you need at this point is very small pick tool from Home Depot/Lowes. They usually come in a set of 3, with different style pick heads. It’s like $8 bucks. With this, you can easily grab the small seal around the shift shaft, and easily remove it. When installing the new seal, make sure you place a thin plastic bag (like the ones at Home Depot/Lowes when you checkout) over the splines of the shift shaft. Now you can take your new seal and push it over the splines (with the bag on them) and it will ensure you do not rip or tear the new seal while is slides over the shift shaft splines. At this point, you can take a matching sized deep wall socket and lightly tap/seat the seal around the shift shaft. Remove the plastic bag, and reinstall your shifter.

Mowernosity...... send it to powder and paint! You should street fighter that mower! Stance it, and get insane cuts!

glad the ruckus is fixed. been waiting for this. still trying to finish my build.

Glad to see you got the Ruckus working again! Hopefully you don't have many more issues with it in the future!

My dad used to work for a car supplier making components for most major car brands, and they always used industrial Loctite, which in no way compares with what they sell in any normal store. So if it falls off again, bypass anything you can buy at Home Depot and go straight for the industrial stuff (I believe it was Loctite 471 but they make different ones for different applications). They even use that stuff to glue airplane components together, so it's fail proof.

just remember the battery's purpose is to start the bike only that's why batteries have cold cranking amps...while riding the purpose of the stator is too charge the battery but at the same time it sends out AC current and it goes to ur regulator rectifier where it converts it to DC current for ur lights and accessories...well brother just a little info fro ur knowledge...later my friend good luck and take care and have fun riding...

so glad to see you got the Ruckus up and going again.

New shirt idea! "Lawnmower build series" have epic graphics of grass being cut with the motonosity logo. Would buy.

Well done, you won't worry about your yard anymore. So interestiing to see you riding this small bike.

Glad you finally fixed it. Been missin' the ruck.

I'm glad you got the Ruckus fixed. Good job!

I want one! The Ruckus, not the lawn mower, though I appreciate there's not much difference...

It's about time you got the ruckus fixed. I love that thing lol

I've got the Husqvarna 330 robotic lawnmower last summer. It's epic!

So many things got fixed in this video! I was half expecting you to fix the leak on the CRF right then and there lol

Well done on fixing the ruckus

Good shit man, congrats on getting it sorted out!

Your ruckus turned out nice. Glad you were able to figure out the issue you were having. Shout out from San Antonio

happy to see you ruck up and running! just started building out my second ruckus, sold my first a couple years ago before our first daughter was born. my wife surprised me this year on Valentine's day. I was wondering, how do you capture your audio while riding. I assume video is with a helmet mount GoPro, but the audio sounds too decent to be coming direct from the GoPro. thanks and congrats on the repair!

Still surprise you haven't tried to adjust the carburetor how difficult is that ?

Hey fam, I'm tryna get back into riding bc I love it and I've been looking to build a supermoto like that, I'm curious what wheels you used on yours bc they look awesome!

Sounds like you need a colder plug? Or gap it less with the upgrades The NKG platinum there like $9 each I put one in my klr 65o. Single and I have twenty percent more power. The factory plug is terrible.

Love the new build series

I got the e-go weedeater the lawn mower is next but been thinking about getting the harbor freight one. It's got some good reviews.

love how you use Warp stabilizer to make your areal mowing shot look better +1

So happy that the ruckus is back

awesome dude! I wonder how many people in your neighborhood are like, "look at this dude running up and down all the time... ughh..." certainly not me bc I'd be out joining in the ride but just wondering how many ppl don't know that you have the following you do. keep it man!

Been waiting for a while to hear about the ruckus

YES!!! The Rukus is back

Ok i might have missed a video what did you end up doing to fix your charging issue?

Next build series lawn mower

You need a full exhaust for that mower. I hear FMF has a good deal on the PowerCore 4 and powerbomb header right now.

Good work on your ruckus! Congrats! well thought commercial with the electric lawnmower,, ;) i like the potential of riding on elektricity but the batterys aren't ready yet

Stator, I knew it.. told ya man! Glad you got that fixed. I have the lawnmower model like one down from yours, gotta use an extension but I love it. Off topic, I saw how green your grass was last year. Gunna have to share what you use to fertilize lol.

Next vid is sidecar mount on the Rucknosity for the mower!! Backyard done in 5. Anyway Moto, glad the family Ruckster is fixed. Now get out there tomorrow & lay down some mph! Peace.

like your video's. Do you have any Connecticut plates?And how is the ruckus?

Im not sure about the idle on the 150cc but I know that my 50cc came idling a little high from the dealership and would move the wheel forward without me throttling and when another dealership did the first service they adjusted the idle screw i think its called on the 50cc and now it idles super low and burbles like a beast but stays on. Maybe look it up for the 150cc?

the all balls kit leaked on my crf. went with oem and no leak. you can pry it out with a blade just don't mess up the seating area

Keep up the good work moto

lowkey like the lawnmower shots plz do more

It's working it's really working!! - anakin from the phantom menace when he was pod racing

I love my eGo lawn mower. did you get the self propelled one?

Bro I'm having the same problem! Do you run a ATR harness & if so could you dm me a pic of the stator clip on the harness ? Like you I had removed the clip + didn't mark the correct spotless each wire ! Smh now I've drained 2 1oo$ + lithums.

Motonosity, the only thing hes does quite it mowing, never mind all the bikes loudly coming and going from his house.

I have the same mower. It kicks ass.

you do know you are burning out your clutch when you start your gy6 on choke and you have to hold the brake, what you should do is start on choke and take it off right away and man handle the iddle until it the engine warms up, anyways just hurts my thoughts seeing you have to squeeze the brake so hard on choke and burning out that clutch

all the mechanics are facepalming so hard it took a week + to solve, upside you learned new skills :) gj man

I completely understand the thrill of scooters. I had a rescued Vespa 50cc that I brought back to life after it had been sitting in the woods for 20 years... Despite having a Kawasaki triple street rocket, I loved riding that little Vespa...

LOL you really threw the drone up there for that shot.. man you dedicated

Awesome mate. well done

Lol I just watched some one cut a lawn on KZfaq.... Nice video as always motonosity 😂😂

briggs&stratton 75-90's lawnmovers are the best if you manage to kill one with regular usage you are just amazing. we have one 20year ish old and we have only added the oil when needed, sharpened blade and changes sparkplug once or twice

Iv used e6000 on a lot of stuff... It doesn't handle vibrations very well... But maybe it will work for you

What does this have to do with the crf450 build?

can you use a catalytic converter instead of an exhaust muffler somebody told me the yxz 1000 had a catalytic converter instead oh yeah you need a bigger fatter back tire that's flat like a dragster so you can skid if you have to and taller handle bars so you can sit upright heck maybe even a seat with springs so that you can be more comfortable but does it fit in the back of a standard or rented suv?

That back yard has great potential to have a shop specifically for the bikes with a playset in the side for the young one!

I'll tell you a third time... CA Primer and Loctite 420... E600 does not penetrate Polypropylene plastic. I know because I bought several expoxy products and ended up with CA Primer and Loctite 420, which TORE PIECES OFF when I tried to remove it.

lawnmower looks okay but expected run time of 45 minutes for me is a deal breaker, we have a lot of ponds in our garden so we have to work round them and make it look pristine so I think I will stick with petrol lawn movers just a little while longer until they make battery life better

I don't know about my other fellow hardcore gas lawn equipment users but I don't like this mower

Do you need a motorcycle license if you do the gy6 swap?

Aww man! You didn't run out of gas?! I was kindda looking forward to that!!

Will that counter seal replacement kit work on a 2005 crf450x? Mine needs replaced.

Let me recommend that after you use that electric mower you let the battery cool down before charging to prolong the batterys life

A lawnmower, this was awesome. 😂 you and batteries have no luck.

proud of you papi

If you scuff the bottom of the fender and top of light bracket and use plastic weld it's a liquid mix. Also use the clamps that should be the most strong hold.

Well done, great work! 🙏👍

Did you fix the loose bolt that u said you would fix 👌

Hi motonosity love your vids and your my inspiration😃

You should def install an on/off switch to your headlights. It's super simple (autozone and only spent like 15$) ..It will help your battery last longer!

Two suggestions: get a bike lift and watch the chain adjustment on the crf. It's likely the chain is too tight which caused the seal to leak. From one Brent to another, love the videos and hope I can make a meet up one day.

yay! fixed awesome man

How's the BMX coming along?

You can try next with fiber resin. I think that's what it's called. It should hold real tight.

is now a bad time to ask if you have fixed your frickin Speedo on the supermoto?

You should try and take care of that carb issue. Not sure if it's a jetting problem or not, but I'm sure it's a simple fix. :-)

If it does not hold on the plate mount, try 3M panel bond, they use it to hold on body panels on cars.

Hell yea

You need to adjust your fuel mixture screw on your carb, that should fix the idle

Says stoaked a lot, gets into bmx and wants to start drifting. Looks like some one has been watching their fair share of Adam LZ lol. Great vid bro

My aunt had that exact one and it was a pain

Ego makes really good stuff for being electric.

Why is the idle set at 6.5k RPM?

how about a 5 plus hspower push gas lawmower build. how about ethanol or even alcohol as fuel.

If this adhesive fails aswell for the 450 tail, then use BISON Polymax. Polymax will be better for this because it doesnt get hard after drying, it always will stay a little soft. I.E. the vibrations of the motor will not slowly chip away at the glue.

lol there is grass in Texas? Nice homeowner equipment

Did you ever think of trying a heavy duty Velcro for the crf tail light? Assuming the Velcro holds to both surfaces and the light comes off, just stick it back on and ride on.

Burnt valve or nah?

I'm surprised you didn't do lunges while mowing for an extra pump =)

So uh... gonna welcome me to Austin by letting me see the Ruckus in person this June when I move there?

hahaha, awesome...glad it's finally going 💯!

well that was a good start

Up the idle screw and it should idle fine without the choke on

More lawn mowing please

5:52 This was at this moment Motonosity knew he fucked up !