The Shaking/Vibrating Miata Pop Up Headlight FIX
Рет қаралды 3,465
10 ай бұрынNoticed one or both of your popup headlights have play or vibration in them? This is how to fix it.
OEM Headlight Rod: amzn.to/44KwNgV
Join my Community!
Discord:
/ discord
Socials:
bit.ly/lowtege_Instagram
bit.ly/AlexP_Twitter
bit.ly/alexptiktok
Affiliate links that help support the channel at no extra cost:
10% Off AWR Racing products w/ code: ALEX
bit.ly/awrracing
#miata
@morefurless 10 ай бұрын
I don’t have a Miata (yet) but this was very informative, much appreciated!
@AlexPerrucci 10 ай бұрын
Thanks, glad it could help!
@eliseoortiz9679 7 ай бұрын
I needed this, thank you!
@AccountSpace 8 ай бұрын
Don't forget to adjust the endstop bushings, I 3d printed new ones and it is stiff
@EricJergs 10 ай бұрын
Finallyyyyyyy I need to do this too lol
@AlexPerrucci 10 ай бұрын
Yuh!
@alanconant8810 10 ай бұрын
Don’t have the problem with an NB! Hey Alex… just curious if you’re going to be at the Miata Reunion in Northern California in a couple of weeks? I think it’s unlikely (long trip), but it would be fun to meet you.
@AlexPerrucci 10 ай бұрын
No not this year. I have a wedding to attend that weekend. I would love to make it out to that event sometime though!
@mars-lv9xo 4 ай бұрын
i cant get the new rod on no matter how hard i pull/press.
@RIPROACH17 4 ай бұрын
Same, have you been able to figure anything out for it?
@AlexPerrucci 4 ай бұрын
try spraying a little lube on it? pb blaster, silicone lubricant, etc.
@redfrederick85 4 ай бұрын
Believe it or not I have done it but it still shakes!
@ricardomedeiros9626 4 ай бұрын
Same… have you find out what was the problem?
@redfrederick85 4 ай бұрын
@@ricardomedeiros9626 Yes. The solution for me was to recalibrate the stop of the headlight. You will have to unscrew the cover of the headlight and remove it. Then you will have to loosen or tighten the bolt that regulates the height of the headlight when in upward position. After some tries I managed to get it right. Now it does not move anymore.
@mccall9770 10 ай бұрын
replaced both mine but still my drivers side is bumpy on the highway or over any bumps
@swich69 10 ай бұрын
yeah this video addresses the worn bushings not the cause of why the bushing are so worn. he is relaying on the retractor arm to stop the shake and put the light back in contact with the stop pads. your issue sound like that the stop pads are out of adjustment. kzfaq.info/get/bejne/fdJ8dbCFrLGUnok.html&ab_channel=MiataMan
@AlexPerrucci 10 ай бұрын
The screws holding the round light to the housing may be loose.
@Kaxhow 10 ай бұрын
I replaced that rod and my headlight still rattles like crazy at idle lmao.
@AlexPerrucci 10 ай бұрын
Need to check the screws that hold the 7inch round light to the housing.
@danielgause9965 9 ай бұрын
Who else already fixed it and it’s still fucked
@danielgause9965 9 ай бұрын
Been fucking with the bump stop and the whole housing still shakes 🥲
@AlexPerrucci 8 ай бұрын
The bolts/nuts that hold the whole headlight assembly into the engine bay might be loose.
@LobsterHaunting 5 ай бұрын
Shes got a lazy eye dont be mean to her
macdaddypimpping
Рет қаралды 757
SixxuaYT
Рет қаралды 2,3 МЛН
MotoBear🐻
Рет қаралды 2,1 МЛН
vazovskie.official
Рет қаралды 2,3 МЛН