The Shlog

Рет қаралды 4,658

Күн бұрын

How do you install a rekluse on a KTM 690? Can you make a KTM 690 Wheel Tubeless, softening up a mousse!
Join Our Crew : bit.ly/2SHy1Fk
Want to buy me a coffee www.buymeacoffee.com/highland...
Want to support us and save money?
1sttrackmoto.com/highlandscyc...
veemototires.com/ Use code “highland"
chinmounts.com/?ref=HIGHLANDC...
If you want to support this channel on Patreon, here is our page:
/ highlandcycles
If you like to shop on Amazon and you want to help us out, use this link www.amazon.com/shop/highlandc...
And then shop for whatever you want. It really helps us out a ton and we appreciate it very much
Want some Merch? bit.ly/39rkdXm
Check out our social media too:
Facebook : / highlandcycles
Instagram : / highlandcycles
TikTok: @highlandcycles
Now…. Go Ride Your DIRTBIKES!!!
#gospeloftwowheels #dirtbikes #highlandcycles
Please support our sponsors
www.tbtracing.com/
xcgear.com/mako-360/
www.2strokeheads.com/
nitromousse.com/
www.systemtechracing.com/
ddcracing.net/
enduroeng.com/
bulletproofdesigns.com/
www.evanscoolant.com/vehicle-...
www.wlfenduro.com/
extreme-parts.com/
veemototires.com/
00:00 Introduction
01:32 Drilling Mousse Balls
08:30 KTM 690 Tubeless
20:19 KTM 690 SAS Removal
23:35 KTM 690 Rekluse
33:23 Outro

Пікірлер: 64

@d.brayman3165 Жыл бұрын

The more footage, the better. Great stuff as usual!

@coybee Жыл бұрын

I marvel at your comprehensive knowledge of your craft!

@highlandcycles Жыл бұрын

Love you Dad!

@coybee Жыл бұрын

Love you. You remind me of a hardworking kid up there leading expeditions into the Black Canyon.

@philsheridan6759 Жыл бұрын

Thanks for another slog

@highlandcycles Жыл бұрын

You bet

@bilboswaggens2975 Жыл бұрын

The same process as tubeless a supermoto. You can diy a kit with envelope stickers, 3m 4412N, 3m 4411N, and I use clear gorilla tape over top of it all. Gives you enough for 3 sets of wheels too.

@kananisA75 Жыл бұрын

Back in the mountain biking days we used to do tubeless conversions and I remember that we would use a lot of double sided tape 4 maybe 5 layers with a little offset from each layer and they worked well for downhill, but it's very Time consuming.

@JoshIngles Жыл бұрын

love all the content, show more please!

@highlandcycles Жыл бұрын

Stay tuned for tomorrow

@2strokelover93 11 ай бұрын

"Moose poop" is the correct term for drilled out 🫎 tubes😂

@richardhartley7094 Жыл бұрын

To many issues with this system as other comments show not for me,awesome content👍

@jimmyneutron6127 Жыл бұрын

I miss it when you don't end your videos with" go ride your DIRT BIKE !!!!"

@highlandcycles Жыл бұрын

I will be back. I honestly just forget sometimes.

@elvispusley3515 Жыл бұрын

Save the mouse worms and put the in when the mouse is worn out , great schlog

@scottphillips445 Жыл бұрын

Oklahoma?! Moped? Well that explains a few things! Is trey canard your hero?

@keithjohnson3993 Жыл бұрын

🤘🤘🤘

@highlandcycles Жыл бұрын

🤘🏻🤘🏻

@richardhartley7094 Жыл бұрын

👍👍

@bumtownproductions5353 Жыл бұрын

Mousse worms 🐛

@jakeh5012 Жыл бұрын

Make another video. More content bro.

@tarded400 Жыл бұрын

People with tubeless trying to put tubes in…. People with tubes trying to go tubeless…. Seems like Errbody wants to tinker. I know one thing I’d never grind the spoke nipples down in case I need to replace them at some point

@HP-hm3pn Жыл бұрын

Can you give us a link to the tape and valve stem sticker covers you used. Thanks for the video.

@highlandcycles Жыл бұрын

No. I didn’t buy them. I’m not sure where he got the stuff.

@sactoeazy Жыл бұрын

I don't think michelin makes a mousse small enough for that tire. I went through this myself on my 125 and ended up drilling it and pulled a small section out to get it small enough. Still didn't like it, so pulled it and put in tubliss. The smaller nitromousse was backordered for it and showed up a few weeks later from slavens. I'm actually amazed that it got mounted! I don't have a rabaconda but do have a machine and a ton of levers. ETA - mine was a 110/80-18, was this a 120?

@highlandcycles Жыл бұрын

It is a 120

@NorthWestMotos Жыл бұрын

Show us the DRZ! Sweet shlog. Sure sure getting rid of emissions stuff is cool but fella might want to flush his brake fluid and get a new final drive setup soon.

@highlandcycles Жыл бұрын

After we make sure the tubelsss works.

@NorthWestMotos Жыл бұрын

@@highlandcycles That’s fair. I sure hate tubes but I’m not sure that’s any better. Would be interested to see how it ends up working out.

@jhueth3969 Жыл бұрын

Curious how this is cheaper then just buying the right mouse. If I had to ride tomorrow I’m totally down for it. Also slime for tubes has saved my buddys bike a few times. Just need to make sure it’s the stuff for tubes.

@d.brayman3165 Жыл бұрын

I agree with you on the Slime for tubes. It does work well, but it only has 2 year life expectancy in the tube. I know, tubes should be replaced more regularly than that, but there are times where adventure/dual sport bikes may get a pretty long tube life.

@highlandcycles Жыл бұрын

Right. Most people buy the tire stuff. It would have been better to buy the right mousse. And if she had come to us first that would have happened but she didn’t. So this is cheaper than buying another set.

@moulin6 4 ай бұрын

You left me hanging… Did the tubeless process for the front wheel worked as good as the Rear wheel?? Was that rear Motoz tire tube or tubeless!? Thanks!!!

@highlandcycles 4 ай бұрын

It did and yes

@claudioteixeira5917 Жыл бұрын

In the future I hope he doesn’t brake a spoke! 😂

@peteregger7928 Жыл бұрын

Or needing to tighten one!

@NorthWestMotos Жыл бұрын

@@peteregger7928 Yeah I was gonna say that. Just don't check your spokes ever again?

@painsrides3616 Жыл бұрын

Mousse-kins .........🤣🤣

@jimmyneutron6127 Жыл бұрын

What is the brand of your long tire spoons. They look way easier than the short motion pro.

@highlandcycles Жыл бұрын

Those are from Rabaconda. They are nice

@rolfwallace8848 Жыл бұрын

What happens to that tubeless system if you need to fix spokes do you have to get a whole new kit?

@highlandcycles Жыл бұрын

That’s a good question. I think the though is that it’s on a more adv/street bike so they shouldn’t need to be tightened after they have been tuned up after break in.

@fredbunkley5604 Жыл бұрын

What kind of drill bit are you using to drill out the mousse?

@highlandcycles Жыл бұрын

I got it from 1st Track Motorsports. Here is a link bit.ly/2fRpJ0w

@toddmontgomery6289 Жыл бұрын

Is the Rabaconda that much better than the standard tire stand? I have the Rabaconda tools, Motion Pro tire tools, etc...

@highlandcycles Жыл бұрын

I think so if you use it a lot. It holds up really well to abuse and makes it much easier

@ogasi1798 Жыл бұрын

i run mousse on my 500 but i run stans fluid on my DH and XC mtb for the last 15 years, never had a flat nor a tyre go down - does stans fluid not work on motorbike tyres? edit: you inserted fluid later hahahaaaa

@highlandcycles Жыл бұрын

Hehehehe

@zxcvbnmnz Жыл бұрын

Tried to put a tubliss in my 701 a few weeks ago but the rim is to wide and the Motoz tires walls to thin for it to seal. Just sticking with a tube and 2 rim locks for balance. Whats that guy going to do if he gets a flat, won't be able to seat the bead with a hand pump. No rim lock so can't run low pressure, just seems like it's just got a lot of disadvantages.

@highlandcycles Жыл бұрын

I agree. And so does he. It’s a test for sure. He will have to carry a tube just in case

@DanBallard Жыл бұрын

Yeah, definitely some disadvantages. But for most of what I’m doing with the bike I shouldn’t need to run super low pressure, and as Morgan mentioned, I will carry a tube as well. It will be super nice to be able to just quickly plug something small (if the Orange doesn’t seal it first) and only use the tube if I have to. We’ll see how it goes.

@200xcBruce Жыл бұрын

Man you work on those tires way too hard and build a sweat with that Rabaconda it should not make you lose your breath. I wondered if a sealant would be needed. I have the Radius X in my 690 and has been great for 2 yrs now. Lots of adjustments first 100 miles.

@coybee Жыл бұрын

How much did all that cost. Text me separately.

@scottforrest2246 Жыл бұрын

Won't the Orange seal will die in 5 months, on a bicycle? Who knows how long in the moto environment? Good luck with that.

@highlandcycles Жыл бұрын

I’ve had it in my bicycle tires over a year. It’s only rated for 5-6 months but if you ride at all that’s 2 or 3 sets of tires.

@highlandcycles Жыл бұрын

On my dirt bike I go through a set a month if I’m not racing. More if I am.

@scottforrest2246 Жыл бұрын

@@highlandcycles We ride a lot on the mountain bikes and latex only reliably functions for 5 months at best before needing a top up. Wait long enough after 3 top ups and you get a fist sized hard globule of latex that throws off the balance and creates a hard spot. I'm skeptical of the long term reliability of this tubeless set up. But what do I know? I'm a luddite and still run tubes in the moto.

@highlandcycles Жыл бұрын

@@scottforrest2246 I’m skeptical too but I think we will change tires long before the longevity of the sealant is the issue. It’s a test. Customer knows it might not work. I just think it’s funny that people expect moto tires to last very long. I went through 3 sets on my 990 in 8000 miles in under 3 months.

@scottforrest2246 Жыл бұрын

@@highlandcyclesClearly you ride moto more than I ride and I'm guessing I ride mt bike more than you and this isn't a passing contest but the way. I know what you're saying. I'll eat crow, or soy meat, if the latex sealant lasts long enough to reach the next moto tire change.