Thanks for watching Stephen 👍, Unfortunately my life is routines hence why most are in the same order but this allows me to be very consistent with my results. I have a lot of watchers that ask for customers reactions and I will try and do some in the future.

I wasn't sure how this one was going to turn out after the walk round at the beginning, but it turned out awesome in the end 👍

Thanks for watching and the nice comment, very much appreciated 👍

Many thanks bud, much appreciated 👍

What an awesome comment 👏 👏 thanks very much. I now solely use the Meguiars microfiber cutting pads 👍

Thanks Themis_TH, no problem and I will try and go a bit more in depth at them as well in future videos 👍

@@cornwallcarcare8959 thanks a lot! It would be nice also if you mention if the car you detail is ceramic coated before and how you strip a ceramic coating by polishing… and maybe some time by wet sanding if that’s necessary… I have applied myself after polishing my car Gyeon MOHs Evo 8 months ago and all the drivers side needed a paint job after an accident.. problem is that the dealership that painted the car washed it with bad washing method before delivery and it swareled the hole car… I would appreciate a tip of how to proceed to remove the MOHs Evo and reapply it… my car is a 2021 Ford Puma in desert island blue colour.. thanks in advance!!!

@@Themis_TH I personally would just treat it as you did before, a medium polishing pad and polish should remove GYEON Mohs and the light swirls but to test this polish a small section and then wipe the area down with GYEON Prep and you will see if the coating has been removed by looking at the behaviour of Prep, Hope this helps. CHEERS Jody👍

@@cornwallcarcare8959 I thought I had to go with a more aggressive approach to strip the coating because it’s somehow freshly applied and not at the end of its lifespan… one thing I forgot to ask you is, for the untreated side that has been painted almost a month ago… should I left it for some time - months maybe, for the paint and clear coat to harden - cure because I don’t know what clear coat has been used or if they baked the panels and in what temperature before delivery ( it’s winter so not enough heat in Greece ) or can I proceed to polish and a Gyeon Mohs application? And if I have to wait should the panel be protected in the meanwhile with something lighter like Gyeon cure or ceramic detailer or it clogs the pores of the paint so it can’t cure properly? Thanks really once again! Eager to see your next videos!!! 🙂