This is super cool, would love to see a 3d printable set/full kit to extend it like that!

I like how white and yellow jeep traded spots on the corner before the rocks. Lol

Holly Cow! That thing is sick! Took your advice on the Goodyear and your were 100% right! Great job!

Awesome project! On your trailer servo, if you have room on the servo arm, move the actuator attachment point closer to the servo shaft and it will reduce the throw. I hope this helps.

I with my "authority" deem you king of the 24s! Very impressive builds!

Ordered your kit and everything else to build one for myself today ! Can’t wait

Love this build! Appreciate all the work it must take to make this

Incredible work brother, I love how the 3500 came out 💯

Man that make a killer mini pulling truck with the scx24 monster tires

This is awesome! Ive been working on my own super duty SCX24, but this looks a lot better than what I've managed to create

I’m building one myself using your STL files! Thank you for providing them! I love your work! I hope to be able to donate to you soon. (I’ve been running it for a few days without the body and I love it, hauling around 3 rigs on a gooseneck flat bed on with my TEKO kit from Furikek. Running 3s, didn’t glue the rear drives shaft together and it’s holding great!)

Dude. That is slicker than camel snot..now all you need is some mini Mico wratchet straps to secure that load, your gonna get hammered when you cause a crash and your insurance rates go through the roof..

That is awesome. I’ve been wanting a 1/24 tow vehicle. I need to looks into buying the parts and doing this. Turned out so good. I love it.

Man pretty sweet! Not sure if you did this already sense this video is a few months old But I put a flysky FS-GT5 6 channel transmitter/receiver on my deadbolt so I could have 4 wheel steer, a channel to control the lighting, and a fpv camera that I can control the pan/ tilt on it. This 6 channel transmitter/receiver would be really sweet on this truck. Plus like the trailer adjustment you talked about you have a trim and sub trim plus a adjustable articulation rate on channel 5 and 6. Bets of all I pick this up on Amazon for under $100 well worth the cost

Absolutely love the warthog!!!

That is so bad ass! Start making one for me to buy! I am a huge Chevy fan please!

Hey bro. I’m a big fan of your stuff and love the fact that you have the files online for everyone to print themselves . I’ll be posting up a video with the tracks I got from you off Etsy. Be on the lookout ! Thanks man. Congrats on the new job and keep pushin on! 💪

Wow. Just wow.

Turned out great I'm building one now.

This is the best tow rig I've seen and even though I'm a ford guy and think chevy is a bit unreliable this is still cool and its just rc so it doesn't matter and if you get a chance or can it would be really cool if you made a tutorial on how to put the scx24 wheels onto the trailer because u have a couple sets of spares I wanted to mount onto mine coolest rig so far good work

Made a old man smile !

Excellent work on the truck and trailer.

Very nice set up. I cut up 2 Big Country gooseneck trailers to build a 20.5 inch triple axle trailer. It’s detailed in Chevy Seafoam green and decked with scale diamond plate. It has 2 C-10’s and a MOFO off-road trailer sitting on it.

Me tooo! I have an etsy account ready to purchase these parts. Super keen to build 1. Legend design dude👍🤠👍

It’s funny I just seen the post on Facebook about this set up and now I come across the video lol

That's awesome, need one now

Wow that’s awesome dude, I’m a Chevy guy to. Appreciate you Sharing, super cool set up I’ll be watching more

That is dope nice ,I wish I had a 3d printer but awesome built

Wow.. absolutely fantastic.. Bravo!!

Axial needs to pay attention to this channel 🔥 great work 👏

I literally just bought a kit from you earlier tonight! 🤣

This. Is. EPIC!

That’s my favorite rig I’ve scene

really enjoyed this video! Looking forward for more content!

I’m doing it but with the dodge one :D

That's badass rig I want to build my own tow rig when I can get another scx24 scale truck

Looks awesome man great use of the servo ramp.

That is sick nice job man

I love the duramax and the trailer. I want one.

Whoa 🤯. 👏🏾

duuuude.... ii wish i was at least half this good on my channel keep it up my dude !!!

Looks hella fun to drive

Freakn awesome!!! Rock On 🤘🏻🤘🏻

Nice job on the rails. Looks about like the fms atlas next to a scx24. Probably not real noticeable until the C10 is beside it. Tractor supply and Orchelns carries that same brand and have a bunch of 1/20 and 1/32 farm trucks, utv, semis and tractors but not 1/24 scale which is very annoying. Lol we have it so bad in the US. Some one on the opposite side of the globe just had their house bombed and family killed but I'm bitching about scale toys. Nice work !!

Great way to get to the trail head!

So cool!

Siiiiick!!!

Love it! I will have to try it!

Badass build sir!!! I have a 2012 GMC Sierra 3500HD and this is a must for me now! I know it's a prototype so to speak, but is everything I would need to modify a scx24 (excluding electronics) but including trailer skeleton available for sale?

Awesome 👏🏼

I did the same thing when it was just a low battery... I always kept it charged for using it in the house.. except once lol..was so sure bought a dang motor and didn't think of checking the battery til I went to install the barage..idk how you guys burnout the stock motor I have extra weight and beat the crap out of it outside just straining it up huge hills.. Mines over a year old and idk can't explain it should be ashes by now

Very cool

Goals💪🏽💪🏽

Beautiful build.

Very nice 👍

this is awesome

THTS freaking sick 👍🏽

Man that is awesome work 🔥👍

You should sell the trailer. Please I would buy no mater the cost and I think others would to.😊

Sick build!

Looks great!! But pleeeese put a $5 servo slower on the tailgate. Then it would be EPIC!!

So rad!

I wish I knew how to create and 3d print stuff. I'm horrible at it.

I want that truck!

That Chevy is so nice! May i offer a idea, it needs this RCAWD370 i just put a 2430 motor in my SCX24. Its so beast

I think this is super cool are you thinking about making these 3d parts available in your shop when just have time?

that's epic love it

Im trying to do the same. I got a body of a ertl 1/18 scale chevy 4 door truck. Made it a single cab and using a wpl chassis 4x4. Still working on it.

Just made the awesome dually kit and rims. My only problem is that the tires in the back are so close to the suspension that they rub. In the video, it doesn't look like yours rough at all. Not even close. Are there any remedies? I can't move them out with spacers because there's not enough thread for it.

Planning to build one of these very soon! What all did you use for the light kit? I really like how you've got the button in the bed

You know, I’m not much of a Chevy pick up guy. But, damn! That’s amazing! Respect, bro. How do you like your 3-d printer?

i see that fz 09 in the back.

Since the square body is such a popular platform why doesn't someone make a body of the crew cab dually

1:24 not 'wheelbase'... track width... amazing truck though, SWEET dove tail trailer EFFIN awsome build.... I might have to download these files and give it a try!

Are you going to be printing out more? I see there's only 4 left and I have to wait a couple weeks. And are the trailers available?

That is really cool, do you use the stock battery and charger?

Just curious, where do you get the parts to print on a 3D printer

Can i purchase said “stretch kit”? I just finished the warthog i bought. Love it. Now I’m working with a new C10

Hey what shocks do u have on the truck

This needs a install vid. Is there something you put in the links to take away the slop

Can you make a video on how to put together the dualy kit and trailer?

Wow awesome build .do you have a link to the Chevy truck and is your files available to build the dully and trailer? Thanks

Can you try a chassis extension on for the trx4m to fit a big country truck?

Are the chassis stretching parts gonna be available on your Etsy soon? I hope so and I’m sure I’m not the only person interested. Thanks

Great work ! New sub !!

Fuckin awesome man love that chevy 3500

When will you have more tracks instock?

You should put your dually wheels on the trailer. Edit: But not the 2 sets I just ordered. Do you have a link for that light kit?

What body is the white jeep on the back of the trailer it looks sick.

Where did you source the 2x6x3mm bearings for the tracks and for how much? This size is unusually expensive for bearings

Ever put big enough tires on the left ones to drive upside down? Jw

What am I doing wrong. Printed the kit. All 4 links are the same length? Am I doing something wrong here.

Sick rig man! Been wanting to build a dually rig in both 1/10 scale and 1/24 scale. Just recently got me a 3D printer and looking to start my project. Do you have links for the 3D printed parts? Or am I gonna have to design the parts?

What body did you use, I'd love to turn my scx24 into one of these

If you sell a kit for this on etsy I would totally buy it!

How did you get those tank tracs on the jeep

I saw you on the fb page . Great work bro . Will you sell the links?

what axle shafts are you running for your dually conversion?

how do i buy the body and truck or does it come with the order when you buy it

At what point do you put powered wheels on the trailer....