The ULTIMATE trailer tongue jack.

Рет қаралды 10,274

2 жыл бұрын

After my tongue jack on my car hauler was bent and not usable anymore. I looked around and found a tongue jack and wanted to try it out. The ULTIMATE tongue jack should solve my problem of having a low trailer that tends to drag most of the time when hitting a dip or going across a ditch. Hers the video of the install and showing how it works.
I purchased mine from Tractor Supply for under 100 after tax but they only keep a limited supply. Her is the link on amazon for the same jack. amzn.to/349Nfhh
#pineylife #trailerrepair #theultimatetrailerjack

Пікірлер: 42

@lazybuck9902 2 жыл бұрын

That is really a good idea, thanks for sharing and demonstrating.

@pineylife 2 жыл бұрын

Thank you and your welcome.

@tom_olofsson Жыл бұрын

That is a great design. I am getting one. Thanks for sharing.

@pineylife Жыл бұрын

They are handy and work great. Your welcome and thanks for watching

@timothywright8698 2 жыл бұрын

That’s gonna be a must have for me ! I drag my trailer jack bad every time I pull my sidexside. Thanks for the idea.

@pineylife 2 жыл бұрын

I have damaged a lot of jacks on low setting trailers over the years. I'm hoping this solves my problem. lol. Your welcome and thanks for watching

@timothywright8698 4 ай бұрын

Finally broke down and put that jack on my trailer 🤣! Should’ve done it a long time ago.

@juanallen2897 2 ай бұрын

Great video. Thanks for sharing

@pineylife 2 ай бұрын

Thank you and Thanks for watching!

@jonathanbrogdon9067 2 жыл бұрын

I got to put one on my enclosed last time we unhooked it we had to use a floor jack I will be buying one of these ultimate Jack's because ruff as I am on one it needs to be ultimate! Thanks for sharing

@pineylife 2 жыл бұрын

The best thing about it is being able to lift it all the way up. Being able to get that foot up high enough that it wont drag is the best part. Your welcome and thanks for watching

@eirjfkjdjd2759 Жыл бұрын

Maaaaaaaannnnnnn where has this video been all my life! Going to tractor supply tomorrow morning

@pineylife Жыл бұрын

Still using mine since the video. Great jacks. Let me know how it goes and thanks for watching.

@eirjfkjdjd2759 Жыл бұрын

The second I finished this video I headed to tractor supply and bought one. Best $90 ever spent.

@pineylife Жыл бұрын

@@eirjfkjdjd2759 Good to hear. Glad the video was helpful.

@christianjensen3182 5 ай бұрын

I put one on my cargo trailer so that I don't have to worry about my tailgate with the tongue jack removed. I also remove it when parked / stored as a form of theft deterrent. There's a short video on my channel.

@pineylife 5 ай бұрын

Thank you for commenting and I will jump over and check your video out.

@Dusdaddy 9 ай бұрын

I liked this one but I like the Jack-E-Up better as long as the existing Jack is still in good condition.

@pineylife 9 ай бұрын

Thanks for the comment and I will check the other jack out. Thanks for watching

@drmarkintexas-400 2 жыл бұрын

🏆🏆🏆👍🇺🇲🙏 Thank you for sharing

@pineylife 2 жыл бұрын

Your welcome and thanks for watching

@mikemayfield721 Жыл бұрын

Where did you find the antler pin on the brim of your cap? I would like to have a couple of those.

@pineylife Жыл бұрын

I got mine at Buckees travel center. In crossville Tn. They had bass, duck and the buck. They are really cool and hood on to your bill good.

@quintonharvey1501 Жыл бұрын

I just bought one and I'm having problems getting it to slide up and down when pin it pulled

@pineylife Жыл бұрын

Look underneath and make sure it’s not bottomed out. They can be tricky if they are screwed up or down to far

@billtribble7197 10 ай бұрын

WILL YOUR TAilgate hit the jack if you need to drop tailgate with trailer attached?

@pineylife 10 ай бұрын

It clears the tailgate just fine. The cool thing about this jack is you can change the height of the jack by moving the pin if you need quick clearance between the jack and tailgate on your trailer if needed.

@quintonharvey1501 Жыл бұрын

What's the plastic piece on the side for with the 10 mm bolt on it

@pineylife Жыл бұрын

That is just a plastic stop for the jack slide.

@elite_7399 Жыл бұрын

So with the slide stop removed, can the Jack be completely removed when hooked to the vehicle?

@Studzilla-is-here 20 күн бұрын

Almost need sub titles.

@pineylife 20 күн бұрын

lol. Turn them on at the bottom of the video. Thanks for watching

@alanshaw4655 Жыл бұрын

can you lower your tail gate with the jack handle all the way down ?. every trailer jack i've had, always gets in the way of my tail gate hitting the top of the jack, or jack itself. really wish trailer companies would design trailers with the dang jack back far enough for truck owners to allow the tail gate to drop down without hitting the jacks !.

@pineylife Жыл бұрын

Yes I can. I have a 2006 Chevy 3500 and my jack is mounted in the tongue of the hitch so its real close to the tailgate but it does clear. That's the great thing about this jack is that its adjustable for different height. You just have to have it set low for the tailgate.

@alanshaw4655 Жыл бұрын

@@pineylife i own a 2000 chevy silverado, reg cab, reg bed, and every trailer jack i tow with always seems to be in the way of me letting my tail gate down ?!. trailers need to be made with the dang jack back further !!.

@pineylife Жыл бұрын

@@alanshaw4655 I agree totally. We have one at work with a heavy duty swing away tongue jack and it is super nice. The make of the trailer is a load trail

@sebastienheujeune7045 Жыл бұрын

where I can get 1 .. what shop u got it from ..

@pineylife Жыл бұрын

I got mine at tractor supply. I think northern Carrie’s them too.

@loveydovey4u 10 ай бұрын

You know Harbor Freight has a drop leg 10k jack for 160$. I would have welded that on it. Be careful with those light-duty jacks

@pineylife 10 ай бұрын

I have found out over time That this jack is really great but weak if I left a car loaded on it or something like that. Im changing to a bigger jack this weekend since I bought a small tractor. Thanks for the comment and watching

@jumpingjack7674 2 ай бұрын

There is a flaw design of these jacks in that the outer mounting tube has too much slack around the inner lift tube. This causes the jack to wobble if you shake the trailer when the jack is fully extended. As I recall the original design did not have this problem, because it was constructed with square tubing. The original inventor of this jack let the patent run out and the current manufacturer decided to make a cheap knockoff

@pineylife 2 ай бұрын

Thank you for the info. Really appreciate you sharing and thanks for watching.