The very basics for the very beginners how to carve and shape a nose with your dremel. Part 1

Рет қаралды 21,338

2 жыл бұрын

Step by step the cuts I do to form shape and a nose with my dremel. part 1
Kutzall
carving burs I use link,
👇
Use code: CFUSION to save 5% on burs and disks
kutzall.com/?aff=24
If u wanted to buy me a coffee here is a link to my pal pal👇
www.paypal.me/carvingfusion
STARBOND GLUE 👇🏻
Use code : Cfusion to save 10%
www.starbond.com/?rfsn=475825...
Pete blair mandrel
Email pete @
peterblair@me.com
Manpa tools👇🏻
www.manpatools.com
All the carving tools i use are in this amazon shop listed below👇
As an Amazon Associate I earn from qualifying purchases.
www.amazon.com/shop/carvingfu...
etsy.me/2Usrss6
/ carving_fusion
#beginnerwoodcarving
#woodcarving #nosecarving
#howtocarveanose

Пікірлер: 103

@theblacken3455 2 жыл бұрын

Jordy, I love how you always recover from a “mistake” and actually show us how it happened and what you do / recommend to fix the problem. It’s these uncut videos that really encourage me to push through mistakes. Thanks and I would appreciate a video or 5 on carving eyes, The struggle is real. 😂🤣😂🤣 Thanks again buddy and carve on👍

@tyronerowe9107 Жыл бұрын

You’re brilliant Jordy, you might not think you’re a teacher, but you are. The way you deliver and present your videos are amazing. I’ve had so much trouble carving noses, you make it look so easy with the way you do it and talk about it. Thanks so much Jordy, you’re a star

@markduggan3451 2 жыл бұрын

Thank you for all the information. Both my wife and I said a rude word when the nose fell off but you showed how good you are by carrying on. Thanks again for all you do.

@micktune306 2 жыл бұрын

Nice to see you've got your mojo back Jordy, happy day's

@peterb2346 7 ай бұрын

The Very Best teachers are Encouragers. And here you are. Killing it! Did you ever think that you'd be a better teacher than carver? AND you're an excellent carver~~~ So: What's that tell ya? Carry on. And: Thank you.

@CarvingFusion 7 ай бұрын

:) thank u

@brianmoore7910 2 жыл бұрын

My heart was in my mouth when is nose come off 👌👌👌

@lizakin1274 2 жыл бұрын

Thank you Jordy, I need a tune up on carving, its been a while.

@rickmeisch472 2 жыл бұрын

I can never not be interested in what you put in your video's, you have my attention .

@CarvingFusion 2 жыл бұрын

Hi rick and thank you

@evilevilrick 2 жыл бұрын

Good instructions. Too bad the nose came off, soft wood does that sometimes I know. You just have to decide if it can be fixed and how best to fix it. If it can't be fixed, maybe it can be changed into a different carving. If not, then it's another chunk of fancy firewood. Always a use for it. Hi Jordy.

@justcarverob9389 2 жыл бұрын

Hi jordy the nose can't wait for part two carry on stay safe Just carve

@jerrybeard8622 9 ай бұрын

I love watching you, I’ve have learned a lot from you, you are a great teacher, don’t stop your videos I want to learn more. I love carving, it’s a great way to have fun.

@CarvingFusion 9 ай бұрын

Thank you

@michaelwray4359 2 жыл бұрын

Doctor great nose 👃 surgery again thank you for sharing your amazing talent and how to fix problems you are the best ever

@stevebritt3543 2 жыл бұрын

So thankful to be able to watch another one of your videos THANK YOU. CARVE ON !

@vladimpaler9274 2 жыл бұрын

Thanks for all the basics videos, they really help a lot Jordy. Keep doing what you do buddy!

@garytaylor1353 2 жыл бұрын

Watching you Jordy I seem to learn every time. The more the better...I am having hard time with the nose. I really enjoy the learner videos and PLEASE keep making them.

@johnnyfortune9800 2 жыл бұрын

I'm learning from you all the time man. That makes you a good teacher. Keep rockin jordy

@TheAstriapo 10 ай бұрын

You are a legend. Thanks for taking the time to show us. I think it was very important to show the nose breaking because we will all have to face that demon at some point.

@CarvingFusion 10 ай бұрын

@bobnicholls 4 ай бұрын

Hi Jordy. Happened across your channel by accident and inspired me to buy a Dremel. Just waiting for the Kutzal flame burr to arrive and I will give it a go. You say you don't teach you just show, but if my high school woodwork teacher taught as well as you show, I would not have dropped the subject in school. Thanks for the inspiration.

@CarvingFusion 4 ай бұрын

Awsome thank you, have fun, take your time :)

@bobnicholls 4 ай бұрын

Jordy, I am in Wales, UK. Sadly the Dremel I bought is underpowered and useless for this (the Stylo model.) I want to stick with a 1/8" collet as I have all the burrs. What Dremel model would you recommend please?

@jimrodger5341 2 жыл бұрын

Way to go Jordy always keeping the beginner in mind I been at it 3 years now and I still enjoy them 👍👍👍🏴󠁧󠁢󠁳󠁣󠁴󠁿🏴󠁧󠁢󠁳󠁣󠁴󠁿 having said that I’ll keep my nose out of it 😂😂😂

@CarvingFusion 2 жыл бұрын

Lol :)

@hughtempleton8640 2 жыл бұрын

Your the one and only jordy Johnson . my mum would always say don't air your dirty washing in public . A lot of people love to see people struggling as you say I just love the hater's the hater's are just jealous . One of your saying's I remember is your just to busy being you ❤️

@CarvingFusion 2 жыл бұрын

Thanks mark

@stuartmackenzie5948 2 жыл бұрын

I still haven’t got noses down yet, they always turn out different to how I want.. keep at it, Carey on👍🏼

@faceinthecrowd5810 2 жыл бұрын

I keep superglue on hand just for the chunks that pop off. Never had a superglued reattached piece come off again!!

@pamelalee1508 2 жыл бұрын

Hi Jordy !!... Excellent lesson..excellent person...win win... Yes..I had some difficulty with my nose on the woodspirit I finished...I do know what was wrong..why it happened and realize I need to change my approach to using the corner of a blank...I This lesson/opinion..reinforced those decisions...thank you very much..😊... So glad to hear you're keeping the group..the folks there..about 90% of them..are there because you said. "You can do this !" ..and have because you gave us the confidence to try..to do...Brovo Professor..👏👏👏...well done... I'll be watching for the next video..as usual... God bless you Jordy...🌿🌿🌿

@mikedelauter904 2 жыл бұрын

I'm diggin' the Kutzall Taper Burrs. Love your video's Brother, keep on "carrying on" MLHNR

@sandyphillips6636 2 жыл бұрын

All hail King Jordy!

@CarvingFusion 2 жыл бұрын

Lol hhaha white armor

@charliemedley7699 2 жыл бұрын

We all need to go back to basics every now an then.

@tommyoconnor7960 2 жыл бұрын

Jordy you rock 👍😎

@walkabout29 2 жыл бұрын

Thanks for the videos Jordy. You got me hooked. I just received my Wren and my Kutzall should be here today. I will post my first attempt soon.

@markdecker8020 2 жыл бұрын

You do and have done a lot for a. Lot of people you are just like the people that watch you thank for your time and help

@michaelnessle8354 2 жыл бұрын

Not sure what the drama was, but just know you have helped an "always learning" carver get better at my craft. Excellent information presented in a straightforward, no-nonsense way. Thank you!

@CarvingFusion 2 жыл бұрын

Thank you

@imfox3007 Жыл бұрын

Your videos have helped me peruse my passion, thank you!

@CarvingFusion Жыл бұрын

Awesome fox ty

@conniecraddock8481 2 жыл бұрын

Lots of 🥰 love your videos. Just breathe -

@evandubose4412 2 жыл бұрын

I sure wish I had cotton wood bark like that in my area! Great stuff Jordy, love watching your tutorials. Been carving for a year and even though I’ve greatly improved, watching your tutorials takes me on another level. Thank you.

@oldncarvingJohn 11 ай бұрын

Great video. Extremely useful, especially the nose fix. Thankyou for sharing your knowledge.

@CarvingFusion 11 ай бұрын

@buvro 2 жыл бұрын

Jordy, for those who say: "Jordy, How do I make my nose: Bigger, Wider, Smaller, Farther off the face?" You might want to recommend a good plastic surgeon. :) Seriously though, thank you so much for the wonderful videos... Working my courage up to give it a try.

@CarvingFusion 2 жыл бұрын

U can do it

@debraparry3888 2 жыл бұрын

Love you Jordy 💖 carve deeper xx

@alanterry6683 2 жыл бұрын

Thanks for the video. The nose knows.

@CarvingFusion 2 жыл бұрын

Thanks big al

@tomevans4402 2 жыл бұрын

Iv used glue with good results, great video. Thanks

@davidhill1220 Жыл бұрын

Wonderful! Thank you! Patricia

@martinwhitter8366 2 жыл бұрын

hi mate, had a yr off from carving, i lost the bug but just wanted to get back into it, i watched this video and instantly i am inspired again, you are so listenable thank you 😊

@CarvingFusion 2 жыл бұрын

Thank you too

@monicagresock3570 2 жыл бұрын

Thanks Jordy! Carry on

@jackieliddell8876 2 жыл бұрын

Thank you for your openness and how to fix a problem. You explain so well.

@martinfoy5167 2 жыл бұрын

Jordy can't thankyou enough for your inspiration and your tutorial videos on carving 👏👏👏👌👍

@CarvingFusion 2 жыл бұрын

Thank you

@thomasvyvial9874 2 жыл бұрын

Jordan your the best. I enjoy watching your work so much. I got a 3000 dremel and just received my bits to start carving. Living down here in south Louisiana. Gonna try with the wood around here. Keep the videos coming my friend. Awesome

@michaelwray4359 2 жыл бұрын

I think you are a king 🤴 carver and I’m proud to be in your carving kingdom you have taught me everything I’m going too try and get fd and get with you guys so I can share pictures and get more advice mike from West Virginia 🇺🇸 just a hill Billy lol buddy loving carving

@Danny-BamBam-Cason 2 жыл бұрын

All hail the Kutzall King Karver!!!! 🤣 😎🇺🇸His Majesty Jordy The Great!! 8 wanna be a Knight in your American Legion 😂 all Bullshit aside man your a pioneer in this new way of learning called youtube. You and all of your affiliated carving Buddy's have hugely inspired and affectively changed my life. I, as you have serious injury inflicted disabilities. HOWEVER! I FEEL REBORN SINCE I DISCOVERED YOUR CHANNEL AND LEARNED YOUR STORY. I'm still a rookie but I give you all the credit for my newly discovered therapy ❤️😎🇺🇸 Please don't stop what you've started Brother. ❤️😎🇺🇸We all Love what you've created. 🎉

@CarvingFusion 2 жыл бұрын

Awesome and take care of that banjo!! )lol

@CarvingFusion 2 жыл бұрын

Thank you so much

@Danny-BamBam-Cason 2 жыл бұрын

@@CarvingFusion lol 😎🇺🇸❤️

@johnnicholls890 2 жыл бұрын

Thanks Jordy

@GregtheGrey6969 2 жыл бұрын

Just tried my first tree spirit... You A-mused me. My kutzall bit is supposed to be here today. My Carbide bits don't work well lol. Thank you for the videos.

@CarvingFusion 2 жыл бұрын

Alll rite who cares!!! Haha and thank you

@theresabrowning5900 2 жыл бұрын

Jordy as always a great tutorial....Never get enough of your instructions... Ill be looking for the next one. Have a great day!!!

@onemansjunk01 2 жыл бұрын

Very informative my brother 👌🏼 you just got yourself another sub 🤘🏻👍🏻🖖🏻

@CarvingFusion 2 жыл бұрын

Thank you

@brucemanley7593 2 жыл бұрын

Thank you so much! This is the best video you've done, I think for step by step for the wood spirit.This is so helpful, I can't wait to go out now and put the info into action! ( Robin) I love this!

@buddrinker506 2 жыл бұрын

Your the coolest Jordy.

@amymiller9775 2 жыл бұрын

After watching this & other videos I realize how green the wood is that I'm carving. You whip this out so quick. Plus I would like the 4000 series maybe that would help. Cuz I'm using 3000

@CarvingFusion 2 жыл бұрын

3000 is very well good enough , ty

@aidenfletcher6503 2 жыл бұрын

Excellent video jordy each time i watch you i say so thats how he does it iam mostly carving on blocks of boss's wood so i use the side angle to get a nose but that crates more problems with the forehead and so on done one on a flat board again not easy but hopefully i can get some nice piece of wood soon i only started carving after watching you carry on good sir ☘

@a.c.m.3312 Жыл бұрын

Good work. Thumbs up!

@CarvingFusion Жыл бұрын

Thank you

@rumpple4skin976 2 жыл бұрын

great Video Jordy really like the beginner vids it always helps to keep yourself refreshed and learn something new as well. Carry on, Carry on.

@John-oi9ve 10 ай бұрын

You are awesome

@nigelgreaves4980 2 жыл бұрын

That was a bummer with the nose jordy. I’ve never carved cottonwood bark but can see the struggle. I carved an Easter island head and accidentally gouged his cheek but it added character so I’ve left it. He’s just got a war wound 😂🤷🏻‍♂️ You’ve got me obsessed carving wood spirits , I can’t stop carving them. Keep up the good work matey 👏💪

@CarvingFusion 2 жыл бұрын

Hahh thank you

@michaellafleur2077 2 жыл бұрын

Great video Jordy! nice recovery from the nose break lol. I like how you love to explain to people and take your time, so they understand it. See you on the next one buddy. Glad the facebook is staying one of my favorite places to visit.

@CarvingFusion 2 жыл бұрын

Thank you

@killervision5874 10 ай бұрын

When your sharpies dry out just take it apart add a few drops of 91% rubbing alcohol and wallah got a new marker

@CarvingFusion 10 ай бұрын

Great idea

@projectwoodcarvingwithstev6734 2 жыл бұрын

Great video Jordy alot of info to soak in. I love how you explain things so a simpleton like me can understand what to do and how to do it. Thank you for that. My biggest problems is trying to keep everything level. Bad eyes I guess eh lol

@jmadadak 2 жыл бұрын

Hi Jordy, When the nose broke off I know too well how that feels but cottonwood is pretty forgiving and goes back in place easily. In the past I’ve used super glue and it holds real good. I go through super glue like you do sharpies 😜

@CarvingFusion 2 жыл бұрын

Lol

@leisacampbell5420 2 жыл бұрын

Hi Jordy, I am a very new to the world of carving. My first piece is a fairy. She's 5 inches head to toe. Her face is so small I used the smallest bits I have for my Dremel and smallest knife. My second carving is a bust of an elf. Still working on it. It stands 2 inches. My biggest issue is the eyes. Can't carve the shape of the eye, eyelids.

@CarvingFusion 2 жыл бұрын

New eyes video will be commig out soon

@wimeets59 Жыл бұрын

Hi Jordy i learn my dust much of the carving 1 question my dust how can i make it go away?

@CarvingFusion Жыл бұрын

I have videos on my dust table in my olaylists

@vladimpaler9274 2 жыл бұрын

Jordy nose 👃 how to do it 👍

@mikE_6-28 2 жыл бұрын

Thanks Jordy, I have "cheek" issues and when I turn to view the profile the "cheeks" and nose don't look quite right. I guess I just don't push the cheeks in right (or something). Can we add a tutorial on "profile"? Or something like that or add it to the next nose tutorial? Btw, I was going backwards on my nose work... I'll change it up and do it like you just showed - forehead, brow, then nose..... Cause soon, when I get this down, I'm going bigger... Can't wait 😀

@randalltindall7340 6 ай бұрын

Hey what carving book is that in the video?

@SewWhittle Жыл бұрын

Got out a piece of wood and plugged in my new Dremel for the first time. Tried following along with this video and am SO discouraged. Not sure which way to turn. Help!

@CarvingFusion Жыл бұрын

Keep at it

@joannapage528 4 ай бұрын

HI Jordy Just found your chanel You said there are plenty of pictures on line for reference....where do I go to get those pictures cause I think I need them. I am a beginner but I am practicing to make puppet heads out of wood

@CarvingFusion 4 ай бұрын

Ummmm if you just Google them ?