The WELDER, Re-Invented! TEMU Surprise

Рет қаралды 1,139,112

9 ай бұрын

What is this funky looking oversized drill and how does it work?
Yes is the same Welder I showed last week that I picked up from TEMU.
The TEMU page for this welder is currently down. Here is a link to one on Amazon:
amzn.to/3VY5oYd
IF you want a really cheap one I have tested this one out as well:
amzn.to/3JmP1Nd
You can watch that video here: • Cheap Amazon Handheld ...
We're going to test the this hand held welder and how it compares to a regular welder. Also seeing if it's worth buying and if I'm keeping it!
#diy #welder #toolreview
Other Welding Supplies:
Welder Tools and Supply:
Nozzle Gel: amzn.to/351bxuC
Anti Spatter Spray: amzn.to/3WzXH8w
Welpers/ Mig pliers: amzn.to/37CAxco
Welding Gloves: amzn.to/3trCEIt
Magnets: amzn.to/3wn9vA2
Clamps: amzn.to/3uhLms2
Angle Grinder: amzn.to/3im5yDJ
4 1/2" cut of disc: amzn.to/3Iw45VQ
Wire Wheel Brush: amzn.to/3tqDAgg
amzn.to/37GN6mZ

Пікірлер: 480

@JustinTopp 8 ай бұрын

I bought a 45 dollar HONE brand stick welder and have been get impressed. It’s 120 amps and burns great. The he amperage it says is accurate and it’s very smooth. Burned 12 pounds of 3/32 7018 on my flatbed build and have had no problems so far

@peterschmidt1453 9 ай бұрын

Even at a couple pounds only using that for an extended period of time, trying to be steady, it is certainly only practical for little welds, but I am impressed that it does work.

@loulagro2315 8 ай бұрын

@tripplefives1402 ...... Except this in NOT cordless, it plugs into wall outlet

@MR-backup 8 ай бұрын

@@loulagro2315 but it looks cordless.

@loulagro2315 8 ай бұрын

@MR-backup , Yes it does

@stephenyetman 8 ай бұрын

Yes after using that for a day you'll have arms on ya like Arnie Schwarzenegger 🤣

@Cantthinkofahandle117 8 ай бұрын

Seems obvious to me that it's not intended for extended use.

@Coach_BigMac 8 ай бұрын

I think it's a good tool for quick welds around the house or beginners doing small tasks.

@scottwillis5434 8 ай бұрын

Not sure a beginner would be better off with a heavy hand-held welder with a power cord and ground lead, vs. just having to hold up a stinger with one lead.

@non1503 8 ай бұрын

These could be really cool. For really quick welds. After solid state batteries come out. and can be cord free or carry a battery about the size of that normal inverter welder. of course if it was the battery pack option. I would get one in the normal inverter style. I would rather have normal equipment attached to the battery.

@donepearce 8 ай бұрын

Quick welds around the house? What kind of house do you live in?

@non1503 8 ай бұрын

@@donepearce makes sense to me. I got all types of things I can weld around my house. Not as many inside the home.

@donepearce 8 ай бұрын

@@non1503 Clearly a language difference. In the UK, "around the house" means inside the building. "Inside the home" has no meaning as a home is not a physical thing - it is the feeling and atmosphere you create inside the house. To encompass everything I would probably say around the property. And yes, I could use a welder right now to move the hinge brackets on my garden gate. But not this one - it looks really clumsy to use.

@MiniTruckMatt 6 ай бұрын

there are few random instances where I need to weld something super minor and this thing would be PERFECT. I don't really have the space for a full welder, nor the need. I might actually have to check this thing out.

@kaybuilt 6 ай бұрын

I just brought one just to do small welds. i like it🤷🏽‍♂️ All in one it’s portable and it actually works.

@zfolwick 7 ай бұрын

I actually have this. It's legit as a beginner tool. I've used it for 4 hours learning to weld yesterday. It's doing great at teaching me. I've had none of the issues with the clamp, but I want to replace it with a magnet regardless.

@ricky624 7 ай бұрын

This is awesome for backyard projects, I was able to do a full exhaust with this thing, also I got it for 43$ from temu ONG ITS WORTH IT

@andrewfreeman88 7 ай бұрын

Replace the clamp with a Magnet?

@michaelduran2711 4 ай бұрын

Question could this also be used to tack weld cars? I have a hard body and was thinking of repairing the rust spots on it. @@ricky624

@jimmylabay156 4 ай бұрын

Ats funny as hell. I learned how to weld yesterday

@jessytinsley3285 12 күн бұрын

Cut 30% of the ground cable off it'll perform 300% better .. just take my word you don't need half of it anyhow

@timtimtimmay4654 8 ай бұрын

Seems like a good little low footprint emergency welder for those times at the track or trail when someone has a generator or battery box handy to make a trail or track repair on broken motor mounts or suspension components to get home.

@ololh4xx 7 ай бұрын

your sentence reads like a looooong trainwreck. But : "yes", it appears to be a good single-use emergency welder.

@maxx1o1 7 ай бұрын

@@ololh4xx I read it just fine. I don't know what you're talking about.

@AdamantineAxe 6 ай бұрын

@@ololh4xx 4 or's

@kortex3756 6 ай бұрын

@@ololh4xx the fact you even pointed that out just displays what kind of person you are... so insanely petty

@friktionrc 6 ай бұрын

@@maxx1o1I think it’s a dig at the lack of punctuation. No commas, no full stops etc etc

@joey193650 8 ай бұрын

This would be great for emergencies around a farm or out on construction sites that do not require welders on site normally. For say equipment repair or something.

@stevederp9801 8 ай бұрын

This seems like a great solution for people on a trip. If you were out and needed a quick repair and had the fuel to run a generator or use an AC inverter. I can see this being something to repair a broken metal piece for a trailer or some other repair

@outdoorzone 8 ай бұрын

This could be handy in an off-road situation to fix your rig to get back to camp!!!

@outdoorzone 8 ай бұрын

Just bought one on Amazon gonna test out plugging into a 12v 450watt dc to ac converter! See if it will operate good using 3/32 rods or 1/16 rods I tried this but it was not enough wattage to turn it on! Probably would need 1000-1500watt inverter to make this run!! Gonna try an 1800 soon and see! I Will post back here!

@neototem4110 8 ай бұрын

Exactly. Anyone with vision with preparedness would stash this in a side panel as a field option to get out of a bind. This is exactly what I said when he confirmed it could get an acceptable bead w/ penetration. That's all we need to make it home.

@outdoorzone 8 ай бұрын

@@neototem4110 👍👍👍

@grinningtiki220 8 ай бұрын

@@outdoorzone just posting so I can see the update with the inverter.

@GonzoDonzo 8 ай бұрын

Ive seen people take a lithium ion polymer pack from a car jump starter and use it to stick weld. Could probly have a dual purpose emergency welder/jump starter with a little know how. It was a radio tower tech who had to climb up and down those tall towers to make repair welds that were tiny but impossible to bring a welder up the tower for. So tiny light lithium pack with the clamps it came with and he had the perfect stick welder and no longer had to make those extra trips and hoist things up and down. Plus no need for a generator or inverter

@KTA99 6 ай бұрын

I have a 220 Hobart. I keep this close by. It's great for quick and easy job. Vers lugging around a 300 lb machine.

@DaleyChopperDMAX1 6 ай бұрын

I been wondering about this welder. I glad you made a video on it. I think I’m going to get one just to keep in my truck so i can patch something in a pinch

@fabioarrua 8 ай бұрын

i think this would be excellent for some occasional tacking out of the shop and having it in your vehicle / toolpack for emergencies

@Coffeesurgeons 8 ай бұрын

Just wow I bet its amazing quality !

@darzo7527 9 ай бұрын

That's like welding with a Brick.....I prefer to use a stinger.

@thecrazymayanthebeststshooting 9 ай бұрын

Yes 🗿

@-DIYPRO- 9 ай бұрын

Yes indeed!

@artlife6210 9 ай бұрын

agreed lmao

@blueberrywilbur315 9 ай бұрын

My first thought was I don’t weld a lot but damn I bet it gets heavy💯

@blueberrywilbur315 7 ай бұрын

@@Eric-ub3ep Seeing as the weight on this is heavier than a cordless drill. Is not cordless and how many people are drilling foot long beads from a heavy ass drill handle 2 feet away🤡🤡🤡🤡Congrats you sir are a fool

@officialWWM 9 ай бұрын

That welder has a great heart 😂😂

@georgewelker853 9 ай бұрын

I would try to swap the ground and the stinger. That way you can actually use it in a non perfect access environment

@guillermonieri4203 7 ай бұрын

Interesting. Thank you.

@crazedgoldminner7384 8 ай бұрын

Few years back I found an old Montgomery Ward buzzbox City yard sale I took his home clean it up clean up the contact points used to heavy set of jumper cables for the welding cables and it's been working sweet ever since it's only like 50 60 years old

@beaumontboy 9 ай бұрын

I think this could be a good machine for bolt extractions using a 3/32 308 or 309 Stainless rod.

@jerbear7952 8 ай бұрын

Yes it would be perfect. May you never need to use it.

@oldkingcrow777 8 ай бұрын

@@jerbear7952you as well, sir. You as well 😂

@arcadian.nightmare.0 8 ай бұрын

It might be useful for larger projects like if you had to go up a ladder or something but I'll definitely add it to me space toolbelt would be better if it had a bracer type design with retractable cables and possibly replace/modify it to accept welding coil

@antonjaden2482 6 ай бұрын

Nope..ur hand will get exhausted if u use it to long.

@ahdam82 8 ай бұрын

My brother just mailed me a mini Stick welder. The thing works great. It’s like 7 1/2 inches long I know that doesn’t sound right but we’re talking welders here! And it’s only like two or 3 pounds and 120 Amps!

@hamedshanfari2493 7 ай бұрын

Glad to know thank you much

@tedbastwock3810 9 ай бұрын

Wow, learn something new everyday. Thanks for sharing this. 1st thought that comes to mind is do I really want to hold an inverter that close to the core of my body for any extended period of time .. before someone thinks Im crazy, consider that folks with pacemakers are told to go nowhere near welding machines. 2nd thought is, why hold all that weight in hand when for around the same price I can get a cheap stick box inverter with traditional electrode holder thats much lighter. Neat concept, maybe it has some useful applications, idk, but I really do appreciate you sharing with us.

@Bob_Adkins 9 ай бұрын

The only possible benefit I can see is, you can throw it into the back of the SUV and take it to the cabin for a quick repair.

@orangezeroalpha 8 ай бұрын

@@Bob_Adkins And its $66 I see. I'd rather be on a ladder with this thing, maybe?

@Mad-Lad-Chad 8 ай бұрын

People with pacemakers being told to avoid welders doesn't mean people without pacemakers should avoid being close. The signals can interfere with the pacemaker, hence the advice. Humans aren't made of electronics and circuitry, our bodies aren't interfered at all by the electrical signals.

@charlesangell_bulmtl 5 ай бұрын

@@Mad-Lad-Chad BS, "our bodies aren't interfered at all by the electrical signals" not that you're aware of?

@jackthomson73 8 ай бұрын

In Australia we can get a little 130 amp stick welder that is about 8 inches long and about 4 inches square. Weighs bugger all and still runs a stinger lead and an earth lead. About $180 au

@donutdan1508 8 ай бұрын

I've got a little Flux core machine like that here is the US and have used it to repair my snowplow, and butt weld the plow truck frame. Works like a charm. ✌️🍻🍩

@BEETLEJ00CE 7 ай бұрын

What’s that one?

@darkshaman7087 7 ай бұрын

Handy for a quick diy job, like I have a metal door on my shed and the weld in popping in the hinge and this would do the job.

@bostonbikebits6539 9 ай бұрын

I reckon the Chinese amp is less than the traditional amp. My inverter welder reckons it's putting out 200 amps when it's nearer 130. It was very cheap and it works ok for my needs but the dishonesty and exaggeration of some Chinese sellers is ridiculous.

@mitsos306ify 8 ай бұрын

Actually, the trigger function is clever, because you can move around your stick and activating just before you weld

@dwaynesykes694 6 ай бұрын

Can do that with a normal stick welder, too. They pump out ~20v, it won't shock you unless you're laying in a pool of sweat on the grounded metal plate you're welding and grab the stick with bare, sweaty hands. Even in that scenario, it's usually just an "ouch" moment unless you're inside a pipe or confined space and get stuck in contact with the grounded surface and electrode.

@ccscraps6946 9 ай бұрын

I'm surprised at it's capabilities. I don't like the work clamp. If you can bend it by hand, I can see it melting away. I still may buy one. I like weird stuff like that.. stay safe man.

@-DIYPRO- 9 ай бұрын

Right on, stay safe!

@Cantthinkofahandle117 8 ай бұрын

A ground clamp needs a tight, solid grip. That's the first thing I'd do before ever using it.

@ccscraps6946 8 ай бұрын

@@Cantthinkofahandle117 that it does. I just replaced a K910-1 today at work.

@ivlark1 8 ай бұрын

For someone who does extremely lite welding.. seems like a fair buy.

@taliaperkins1389 8 ай бұрын

You've got to love Engrish!

@Jango975 8 ай бұрын

Great idea but I prefer the usual cause it’s lighter to keep a steady weld

@bad74maverick1 Ай бұрын

The semi automatic mode is a switch where you push on the trigger and it starts to weld. If you flip the switch the other way you press the trigger once and it starts welding, you have to then press it again and it will stop.

@TheSpectralArtisan 7 ай бұрын

Just recently my machine at work started being intermittent and shutting off on stick mode so I ended up doing the job on tig mode with my pedal but on dcep with stick electrodes, and honestly starting a stick with my pedal was amazingly easy and much better than scratching lol This kind of reminds me of that! I bet with some use this could be better for some than scratching as you can just put it down a mil or two off the work and and pull the trigger? Does this have a high frequency start? Or?

@rdizzy1 9 ай бұрын

This could be good for an average person that rarely needs to weld, doesn't know shit about welding, or electricity and just doesn't want to electrocute themselves.

@robgad2271 8 ай бұрын

If I start welding from my bike for transportation, I may curbside it, but thanks for the excellent info, I was skeptical and now know I don't need one, my go to inverter box is an arc/tig/plasma combination machine and is only 25 lbs soaking wet. Well, I was joking about the soaking wet part. Good video. Thanks.

@ryanblystone5153 8 ай бұрын

Thank you

@andrewjones8848 8 ай бұрын

For the price it’s good to know that It works

@Komeuppance 9 ай бұрын

I like the ultra compact size, and that its a goofy idea... a legit metal glue gun lol. I'd probably make a rod extension holder so its easier to use.

@scottowens1535 9 ай бұрын

Absolutely! Just add a real stinger and wire length right to the front of it and your in business. I'm thinking that it would look good stuck under the seat in my trail jeep for those special occasions which occur when out stretching suspension.

@kbbacon 9 ай бұрын

@@scottowens1535First thing I thought. Add a stinger wire and then why not just use my inverter welder to begin with.

@jtjames79 8 ай бұрын

I was thinking about 3D printing a new case for it. The weight needs to go under your hand, so it stabilizes like a pendulum. Possibly even arm mounted.

@Komeuppance 8 ай бұрын

@@kbbacon because you won't have a metal glue gun. Also, are those units as compact?

@kbbacon 8 ай бұрын

@@Komeuppance it's pretty small. Maybe not quite that small, but I get a little more power which means bigger rods. Thicker work material. I'll take a little more power. Also, it's easy on the breakers, so I'm not running back and forth to the electric box.

@worldofrandometry6912 7 ай бұрын

For all those saying that this would be handy to use offroad, where does the power come from? Even if you have an inverter in your truck, will it work from that?

@-DIYPRO- 7 ай бұрын

Excellent point! You'll want to watch this one: kzfaq.info/get/bejne/iOCWgsaWzafIpXU.html Could maybe do sheet metal of lets get real, most off road fixes are brackets or thicker members. You'll need a good size generator to power it.

@swedishpsychopath8795 4 ай бұрын

I keep two of these welders in my Cessna 172 in case the wings fell off, or I have problem with the landing gear, propeller, etc. Recommended.

@Mcdashiznit 8 ай бұрын

I'm new to welding I wanna try this temu version

@masonbrantley9646 8 ай бұрын

I’m actually surprised it works that well. I thought this thing would only weld really thin metal.

@jonhartford8332 8 ай бұрын

Thanks for reviewing this thing so I will never be tempted to waste my time and money.

@etneitzel 6 ай бұрын

I had the same 94 escort

@yoshinoyajones8924 8 ай бұрын

I would use it to tac up some stuff that has to travel to get welded. seems like a cool deal.

@jackofblades3171 7 ай бұрын

It may be useful for field work. I've never had the opportunity to just go weld where ever I'm needed

@Spacecruizer203 7 ай бұрын

Excellent info and guide I'm wondering if I can use this to stretch my minibike frame I have these half inch thick tabs they are some sorta steel metal 💪🏼💯💨💨💨

@charlesangell_bulmtl 5 ай бұрын

Being 1 armed, I can't imagine wanting to use that much. Just added an inverter MIG, stick, TIG machine after losing function with my old Miller MM120. Seems to work fine for $200+ Haven't tested it to its limits ...YET. Only real complaint is the unconvincing threads attaching the Euro gun, may need to replace the cheap gun with a metal threaded one. Didn't come w/TIG torch, would also require a gas other than CO2.

@Girrthedogxxx 8 ай бұрын

Just ordered mine, I'll let you know how it works.

@terrallputnam7979 6 ай бұрын

I bought one of these and it welded ok at first but I had trouble getting the heat setting right.

@bcreason 7 ай бұрын

Might be good for a newbie like me that needs to weld once a year. The price seems right and I doubt if I’ll ever need to do a big weld.

@jameshisself9324 6 ай бұрын

For up welding all of that handle length might work OK, but for anything else all of that bulk off the back is cumbersome. Considering all my TIG rigs came with stick attachments and settings, those will still be my go to on those rare stick occasions.

@FijiLaw 9 ай бұрын

WOW didn't know you could weld with drill, will give it a try. Thanks!

@Normandy1944 9 ай бұрын

I had a Spinwelder as a kid...it was a toy. All it was, was a electric motor in a kid size drill casing. You put a provided small plastic rod on it and with the supplied plastic build project, it spun fast enough to melt the plastics together...but barely. If I recall correctly, using modeling glue worked better.

@rapidcars1 7 ай бұрын

this seems something that would be fairly easy to use for someone that's never welded before also as far as the noise being right near your head just wear your protection

@Catrik 6 ай бұрын

A normal electrode holder that is much more compact, much lighter and has much better adjustability for the electrode angle is easier to use in every possible way.

@netalkss 6 ай бұрын

When u said the escort u had in high school I wasn’t thinking about ford 😂

@vgoodwin2088 7 ай бұрын

LOL. Your good at welding the rod to your work. Remember always to pull the trigger. LOL

@bobstovall9570 8 ай бұрын

Put it in the tool box in your pick-up truck, provided you have access to AC power to run it. It might come in hand for minor emergencies where only a welder will solve the problem.

@stewiex 8 ай бұрын

That's what I am thinking. This thing is just the right size to be a handy portable welder.

@donutdan1508 8 ай бұрын

Like a spot repair or welding a nut on a broken bolt for extraction. ✌️😁🍩

@Jim-re3sr 6 ай бұрын

Maybe as a hobby tool on your bench. Great review

@snapon666 9 ай бұрын

Offroad with a generator ? might be handy ?

@Komeuppance 9 ай бұрын

I thought the same... but at that point, just go DC from dual battery setup. Much more useful.

@jeffrey88888 7 ай бұрын

Thanks for showing the test video. Their ad on instagram makes it look like they're applying silicone caulking instead of welding.

@user-yo7gb2iw1r 8 ай бұрын

Its good for small, ones in a year project.

@garrettlamb9916 Ай бұрын

I’ve seen a few reviews on this thing that weren’t super negative at all! For a $10 to $30 welder, if it welds at all, I’d keep it in my truck bed box! If you buy it and suck at welding, at least you aren’t out $300!

@yayinternets 8 ай бұрын

This would be great for off-roading or maybe even being able to take care of some repairs around a farm.

@basquo2 8 ай бұрын

Apparently you never had to do much repair around a farm. Sing the piece of junk. You need a good serious heavy-duty welder to fix farm equipment

@Mad-Lad-Chad 8 ай бұрын

@@basquo2 Farm equipment is still just metal. As long as the welder gets good enough penetration on the weld it doesn't matter how "heavy duty" it is. "Heavy duty" is just a marketing buzz word these days, practically meaningless.

@basquo2 8 ай бұрын

@@Mad-Lad-Chad you can have penetration on a weld that is on thick steel and still have a shitty weld. You have to be able to fill in enough to have strength on a heavy, thick weld. And I'm willing to bet that welder right there will spend more time in overheat mode then actually getting work done for you. I have bought low-grade welders before myself. If you want to waste your life on a product like that more power to you

@Mad-Lad-Chad 8 ай бұрын

@@basquo2 Willing to bet based on....what? You know nothing about the product and are condemning it for no reason. Also, not all farm repairs use metal as thick as you are speaking of. There are absolutely repairs that this thing would handle that farmers would find useful. Useful enough to justify buying it? Dunno, that's for each farmer to decide.

@basquo2 8 ай бұрын

@@Mad-Lad-Chad unless it's the thin sheet metal on the outside of a machine, 99% of farm equipment is made up of heavy duty thick Steel. If it's not it's not worth having. It'll just end up as scrap metal. Like I said I've had cheap welders before and they all end up as crap. They might lay down a little bead on some nice thin metal but when it comes time to do some real work they just don't keep up

@atomicbill 3 ай бұрын

I’ve repaired over 20,000 welding machines and plasma cutters. Plus one wood welder and one plastic welder.

@DatBlueHusky 6 ай бұрын

this would be the best thing to bring on the trail or long travels with. Other than this you just need a small generator or inverter to power it.

@timlad5 9 ай бұрын

Penetration and strength are what I want to know. Please do some plate welding with a cross section view. Then at least wail on it with a heavy hammer to see if it breaks.

@-jimmyjames 9 ай бұрын

exactly.

@michaelm1053 9 ай бұрын

That’s not the escort I was thinking of 😂 0:31

@ericjohnson8001 7 ай бұрын

Hand held unit with 'trode on a cable and "feeds" the rod through the unit and completes circuit as you pull the trigger-- a "wire welder" that uses rods instead of wire-- solves the long length problem but can the weight be kept down?

@DonziGT230 6 ай бұрын

If I were going to use it for more than occasional emergencies I'd probably make a lead for the electrode.

@benjaminleask6184 7 ай бұрын

My first car 1978 escort 2 door. Yeh boi

@maloosecat123 3 ай бұрын

Hi, Great video, do you think the Temu welder can do a exhaust butt joint?

@164procar4 8 ай бұрын

these chinese toys are getting better and better everyday, not a top notch machine obviously but really impressed for the price and practicality

@thewatersavior 8 ай бұрын

Is this a good device for an absolute beginner?

@kevinkev1530 8 ай бұрын

Thts cool

@GNARLOUSE 8 ай бұрын

Survival use after SHTF? I didn't know these existed, thanks.

@teardowndan5364 6 ай бұрын

The number of situations where this thing might be preferable to a tiny lightweight inverter with similarly short ground and electrode cables must be few and far between.

@RemoteCamper 9 ай бұрын

Can this inverter welder work off an inverter hooked up to car batteries??? Emergency off road welder for 4x4-ing...

@stoneroastery 9 ай бұрын

I think I will stick with my little suitcase welder for small jobs

@garryharris9098 2 ай бұрын

I wonder if it will weld 1/4" plate matches on 6" pipe. It would be handy on top of silos where you have to stretch out 200 feet of lead to reach up there.

@-DIYPRO- 2 ай бұрын

Since it didn't handle the 1/8" rods I wouldn't trust it for 1/4.

@garryharris9098 2 ай бұрын

Ok. Thanks friend

@felixlab9951 7 ай бұрын

bend the rod down so you dont have to hold your arm up so far......................peace

@idahorunner1214 Ай бұрын

Drops the knowledge and leaves… respect

@Victor-rv5xj 28 күн бұрын

@@idahorunner1214nah Fr………………… peace

@C.I.A_Unclassified 11 күн бұрын

Thanks Huey!!

@actionjksn 8 ай бұрын

I bet if you upgraded the cords with premium wire of a heavier gauge on this it would get you a little more performance. They probably used the cheapest wires that they could get by with.

@Cantthinkofahandle117 8 ай бұрын

I had a Lincoln mig welder from Lowes. It definitely ran better after I put a heavier ground lead and heavy duty brass clamp on it.

@angelaguirre2725 Ай бұрын

Is it a one time use or is it resourceful enough?

@wizzoevo8103 5 ай бұрын

Would this work on aluminum if aluminum sticks were used?

@nicstroud 6 ай бұрын

1:17 This thing weighs two and a half, three pounds *max.* Weird thing to say when:- a. You have scales right there. b. It clearly weighs more than three pounds.

@FoxtrotGear 9 ай бұрын

You had the welder plugged in while touching the electrode and welder. Kept thinking one slip and you were gonna ground yourself out.

@jorgezuni2818 3 ай бұрын

Could it weld with low temperatures heat aluminum Rods . That they sell online or stores ?

@-DIYPRO- 3 ай бұрын

Possibly, I don't have any alum rods but would be interested to know if it works out.

@shawnhorne9296 8 ай бұрын

How much did it cost , where did u purchase it , tks

@hughjass1835 3 ай бұрын

Hate on it all you want, it's actually not a bad little welder and it's handy as can be

@MetaView7 7 ай бұрын

Wow.

@Ryukachoo 8 ай бұрын

I wonder, if this thing was attached to some kind of spring jointed arm on a table, like the kind of armature used for a desk lamp.... Could that take all the weight off the tool, allowing for MUCH longer use time?

@Catrik 6 ай бұрын

Or better yet, take something like vice grips, attach a wire to them, then connect the wire to the welder, and put the electrode in the vice grips. Do you think that would work, it would be much lighter, giving you much longer use time?

@av6728 8 ай бұрын

My mod would be a zip tie around the trigger and connect an extension line from where you clamp the rod, and use that extension to hold the rod. Won't have to hold the awkward thing

@santosdr2 7 ай бұрын

could you just use one of those on off foot pedal things coupled with your zip tie method to make it more safe?

@CrudelyMade 7 ай бұрын

you could put a stick welder cable into that port, lock the trigger with a tiny clamp, and use the thing as a nice little portable welder. ;-)

@michaelduran2711 4 ай бұрын

Out of curiosity could this be used to tack weld on cars? I have a car that has rust around and I was thinking of repairing it.

@-DIYPRO- 4 ай бұрын

In a pinch maybe. Stick welding isn't the best process for car repair. If you have a lot you'll want to look into a MIG setup.

@michaelduran2711 4 ай бұрын

@@-DIYPRO- ok I'll look into that thanks for that pointer. Still doing research on these stuff. Thank you for the assistance.

@jed-henrywitkowski6470 8 ай бұрын

I got a good little laugh at you saying you had an escort and then showing a picture of a Ford!

@OrganicGreens 9 ай бұрын

Honestly would be more cool if they just made it a super compact traditional stick welder. Get rid of the handle and stuff and it could be the size of a brick.

@Catrik 6 ай бұрын

You can buy them from almost every place that sells weldeing machines. This "handheld" welder has literally no excuses to exist because the same sized welder with normal leads is better in every situation.

@smertrusne3156 6 ай бұрын

Absolutely agreed. My compact classic welder is a bread sized, and I wish to have a fist sized smaller one.