GATE Aster MOSFET Version 2 and Version 3

No video

GATE Aster MOSFET Version 2 and Version 3

Рет қаралды 15,169

Күн бұрын

GATE Aster MOSFET Version 2 and Version 3
Merch!
teespring.com/...
My Social Media:
Facebook: / theairsofttech
Instagram: / theairsofttech
Music Used:
SilkySoap- Hung over n sad
/ silkysoap
Zeeky Beats- FollowHer, Same Old, Like Yesterday

Пікірлер: 56

@TheAirsoftTech 3 жыл бұрын

Gate was kind enough to upgrade my aster V2 from basic to expert before they sent it out to me. So even though the box says “basic” its definitely an expert model with all of the fancy features. Thanks Gate for sending me these products to review!

@johnbosworth4586 3 жыл бұрын

I've been watching your videos quite a bit recently and subscribed. I've been out of airsoft teching for a few years and wanted to know where you purchase your airsoft parts from. It seems like the older shops I used to use are no longer in business.

@TheAirsoftTech 3 жыл бұрын

@@johnbosworth4586 brill armory, clandestine airsoft, evike sometimes

@jamesmatthewthomas2758 3 жыл бұрын

Maybe you could make a video on this but a two part question, there is a french airsoft shop www.powair6.com/ they offer the option to install a brushless motor and gate titan in your gun at the same time, can you discuss how easy or difficult this is, possible benefits and tech issues, is this the future ? secondly it seems you are a big fan of ARES in the past, I hate the proprietary magnet sensor electronics compared to a gate titan for ease of teching, however I recently pre ordered the ARES kel tec RDB because I love the RDB. What are your thoughts on the proprietary EFCS over Gate titan electronics, the RDB as a platform and with the proprietary electronics adding a brushless motor and outer barrel adaptor to use a maxx model hopup in an RDB custom build. This is the barrel adaptor www.aliexpress.com/item/4000453776919.html?spm=a2g0o.cart.0.0.310e3c00RaYLFd&mp=1

@TheRealDealAirsoft 3 жыл бұрын

@@johnbosworth4586 where are you from brother

@parky6031 3 жыл бұрын

I was wondering if you might make a video for new techs that have common problems. Maybe for stuff you had trouble with as a new tech? For me im having trouble closing the gearbox shell. Its a nightmare. Just a suggestion. Love the vids!

@SMG59- 2 жыл бұрын

the most helpful video i’ve found on the ASTER v2 in 2022. went into full depth of how to pair, whats needed to fully tune and what the sub menus of the app do. MUCH APPRECIATED! slapped an Aster v2 in my g&g tr16 and with a quantum trigger and its BEAUTIFULLY fast and responsive. i have the basic firmware for the aster V2 and its more than enough to get into CQB style play. thank you again!

@V8Spitfire 3 жыл бұрын

Man great timing! Was thinking about getting the aster!!

@PetarJovanovic-dr3wn 9 ай бұрын

Loving the matterhorn screens

@Terminatorbart 3 жыл бұрын

That app makes it so convenient!

@someairsoft 3 жыл бұрын

If your not looking to use the old BTC anymore, I would be more than happy to take it off your hands lol

@keywerd6403 3 ай бұрын

broski ive been wondering for like 3 days now if a gate aster would work for a dsg build thx bruh w vid

@iltrmb 2 жыл бұрын

The packaging is surprisingly good for those mosfets.

@NepaAirsoft 3 жыл бұрын

Liking the look of these mosfet. 2nd video I watched on them and major impressed.

@joshuastimmel 2 жыл бұрын

hey i have a question when i did the app i accidentally put my version as basic instead of advanced is there a way to change that. also upgrading the firmware is becoming challenging it doesn’t let me go through the steps. please help p.s. when i go to upgrade my thing it says it’s already a advanced edition but on the app it says it’s the basic version.

@hughobrien1234 3 жыл бұрын

Gate ASTER paired with the Quantum trigger is superb

@jamesnicol9810 3 жыл бұрын

It's the only way you can make the Aster work lol

@hughobrien1234 3 жыл бұрын

@@jamesnicol9810 no if you upgrade the aster software the issue last year was resolved.

@jordancook5171 3 жыл бұрын

Soon I'll own 3 built v2 ssg builds with gate titans in them 😊 been running the gate v2 expert over a year now and it's flawless

@thelethalpredator672 2 жыл бұрын

So I have the aster, do you think getting a bluelink and a expert key would be worth it? I installed successfully first time

@jordancook5171 2 жыл бұрын

@@thelethalpredator672 I'd go with the gate pros

@pauls.5815 3 жыл бұрын

So.... you can manually set precocking in dsg mode with aster? I have titan v2 expert, when it is set to dsg the only options for precocking is off and auto.

@ninobrown5538 3 жыл бұрын

Mahalos for the review I just bought the blu link on Saturday. All of my AEG’s have Titan mosfets in them.

@SweetyetS0ur 3 жыл бұрын

You like dogs of war airsoft?

@oldbeginnerairsoft8308 3 жыл бұрын

I can't wait to get 1

@Baron_von_ztreik 3 жыл бұрын

What is the difference in V3 between Aster and Titan? Titan sees teeth and aster cutoff? What are the differences in the programming? What can Titan do that Aster can't?

@gpf32 3 жыл бұрын

in my experience, the only thing I’ve seen that has been a difference between the titan and the aster is trigger sensitivity levels, but other things, it’s about the same.

@Blackfox-1337 3 жыл бұрын

Du hier? 😁

@nicholasdirago7537 3 жыл бұрын

I use the xt30 connectors they are haft the size and they don’t even get hot on the higher rof guns

@jonjohns7080 3 жыл бұрын

Yo I really wanna kno what would be better the Titan or aster

@tbh1484 3 жыл бұрын

What about a perun v2 review or did you already do one

@launch3871 Жыл бұрын

Can you change max Voltage to Gate Aster v2 can accept. I have problem. My battery is 12.67V when is full and its dont work. When its dropped on 12.60V works perfect... I wound change on 12.80V

@austinholmes4417 3 жыл бұрын

Great video, I have some Gate stuff in a few builds and they work very well....How about installing a Gate in an M249 some how if so please make a video on that. Love the channel

@LocoHarrys128 Жыл бұрын

if i want to get a gate titan v2 for a KWA ronin TK 45, what kind of battery i have to buy?

@Edgar-ho6ok Жыл бұрын

Hi where I can buying the gate aster mug cup 😅

@Static_MK3Focus 3 жыл бұрын

Have a titan in my 18:1 DSG, super reliable, survived 21,000 cycles

@opairsoft8100 3 жыл бұрын

That’s not a lot of rounds

@DEEBOW1114 3 жыл бұрын

Just wanted to see if u do tech work on your fans gun or if not Who is a good tech company to send a krytac lvoa to to get some upgrades done In Ohio it just does not seem like there is anyone that does specialty work

@sarchavius1111 3 жыл бұрын

Just wish the bluetooth would be included in the aster, you have to pay extra to really get any fine tuning which is a major downside. With the quantum trigger and the blu link It ends up being more expensive than the titan :(

@jamesnicol9810 3 жыл бұрын

To effortlessly use the aster you need the quantum and usb link . The cost of these is very close the time Titan advance

@MrLink0r 3 жыл бұрын

Really disappointed by the video, this channel used to be a tech channel, which helped to solve certain issues, bun now it is turning in to blah-blah pre-payed videos, I was waiting to see the ways to solve the issues related to the ASTER mosfets as they aren't really reliable so far. It is quite sad to see what is happening with the channel.

@marinusdedreu3833 3 жыл бұрын

Can you do an in depth review on inner barrels? Crazy Jet, VS. 6.03 VS. 6.01 VS. Poseidon air cushion

@opairsoft8100 3 жыл бұрын

PDI/EDGI Steel>all others

@Baldzior69 3 жыл бұрын

Hello :) Did you have opportunity to install Aster in Krytac's GB? I have heard that it not require removing bolt-catch, which is cool unlike TItan's :) But it is about gen. 3 Asters. As far as I know the revision is printed on PCB on fire selector side.

@scummzz4696 3 жыл бұрын

Hey I just had an aster installed and noticed that my breaking point keeps moving back a little bit after a few shots. I’d really appreciate if you could help me

@duallydude7470 3 жыл бұрын

For a Krytac, Titan vs Aster?

@joshiwoshiluz 3 жыл бұрын

Do you know if echo 1 gearboxes are any good, I can take the wait for the lonex gearboxes to get back in stock.

@Fokkkker 3 жыл бұрын

hey where did you get the mandolorian sign on your wall?

@Scoobydcs 3 жыл бұрын

will the basic allow me to set it to semi only? and does basic come with etu and mosfet?

@garypasaway3367 3 жыл бұрын

Hi, i have a question, do you adjust the sensitivity of trigger response without using the USB link?

@fumes1955 3 жыл бұрын

what is the base gun for your m4 build?

@disneairsoft3003 3 жыл бұрын

I have just fitted the aster in my ARP and it is lovely, even tho i didnt get a blue link with it it is still lovely.. But can you change the trigger sensitivity with out the blue link?

@opairsoft8100 3 жыл бұрын

In theory, you should be able to add material to the trigger which will hit the light sensors sooner or take up over-travel depending on where you add material. It should work since it’s a common practice for microswitch mosfets/trigger boards.