Knife Review -- Hinderer XM-18 3" Gen 6: The Evolution of a Masterpiece

Рет қаралды 9,469

3 жыл бұрын

"For the word of God is living and active and sharper than any two-edged sword, and piercing as far as the division of soul and spirit, of both joints and marrow, and able to judge the thoughts and intentions of the heart."
-- Hebrew 4:12

Пікірлер: 34

@tallica4life81 3 жыл бұрын

I always swap out the bearings and put in the Teflon washers. Like instantly. The smoothness of the Teflon is so nice. I deal with a ton of saw dust as a cabinet maker and I work carry my hinders so that’s main reason for swapping out the bearings.

@messmeister92 3 жыл бұрын

Teflon washers are seriously underrated.

@bumstudios8817 3 жыл бұрын

Interesting you prefer those to the bronze

@tallica4life81 3 жыл бұрын

Chris Sproles I feel like the Teflon works better with the dust. With for some reason Pb doesn’t last as long between needing to be cleaned and lubed compared to the Teflon. It just stays buttery smooth longer

@twilly9022 3 жыл бұрын

Great review Rob. Can't wait to get that sweet knife in my hands. 👊😎

@jeffharmon1322 3 жыл бұрын

Hey Rob- miss seeing your knife reviews! Thanks- enjoyed it!

@toadstkr 3 жыл бұрын

So good to see you doing a review! Still one of the best 😉

@bryancbailey 3 жыл бұрын

Love your reviews! Keep up the great work my brother!

@154cm00 2 жыл бұрын

Been waitin for a pro-explanation on this thanks sir.

@blackcat86900 3 жыл бұрын

Thanks for the review Rob. Really like the Gen 6.

@Abby_Normal_1969 3 жыл бұрын

Wow. The scales on the Gayle Bradley Folder are amazing.

@mellowmanmace4346 3 жыл бұрын

The detent on the Gen 5 3.5”was very good, but the detent on Gen 6 on bearings is perfect.

@barmstrong25 2 жыл бұрын

This is a great review.

@bumstudios8817 3 жыл бұрын

My favorite knives

@Fablades 3 жыл бұрын

Nice video, thanks! I still think they need to fix the flipper tab..

@johnburns748 3 жыл бұрын

The 3" non flip gen 4 is EDC pocket perfection

@MultiVance123 3 жыл бұрын

Hey Rob! I’ve been rewatching all your videos and I bet you’ve been asked this a million times, but what angle do you typically throw on your traditionals? Thanks for your time! Respectfully, A longtime fan :)

@ajacks8007 2 жыл бұрын

Too good to answer you I guess🤷‍♂️

@dis1777 3 жыл бұрын

This is a Gen4 in the 3” version. The Gen6 applies to the 3.5”. No big deal of course but thought I would mention. Best to just call these tri-way it seems as it’s all pretty confusing.

@davidlotspeich5547 3 жыл бұрын

I would love to own a Hinderer, I just can't justify the cost.

@bumstudios8817 3 жыл бұрын

True, but like he said think of it as a tool you will pass down to your kids. I don’t have one either, but maybe one day.

@pannan80 2 жыл бұрын

I thought i had a 3 inch xm-18 coming but the guy couldn't handle the customs forms so i got a refund instead. So i can't get one ever,since they only seem to make 10 knives a year. 😡

@Warek200 3 жыл бұрын

nice vid, the hardware is stainless steel not ti

@annmarie9196 3 жыл бұрын

I think we are about due for another Traditional Knives Anthology..... Just sayin....

@MrGtopper 3 ай бұрын

I want a 3.0 I sold my 3.5

@miragenikita6329 3 жыл бұрын

Could someone explain the square recess under the clip for me? Is it for weight reduction?

@patricksmatrick6193 2 жыл бұрын

That's the area where the framelock bends to create lock tension.

@johnburns748 2 жыл бұрын

3 inch Tri way is only GEN 4 not GEN 6,The 3 1/2 inch Tri way is on GEN 6.

@TheVince1995 3 жыл бұрын

Who rocks PB washers on theirs ?

@twilly9022 3 жыл бұрын

When I first bought this knife I looked up reviews of it and Nick Shabazz says he thinks the PB washers are the perfect in between choice of the three. ✌

@EagleJim62 3 жыл бұрын

I do on my 3.5 xm18.

@Anderdale2 3 жыл бұрын

I want one, too bad hinderer has no love for the left handed people. I can’t support someone who won’t even tap the other side so I can at least carry the thing in my left pocket.

@patricksmatrick6193 2 жыл бұрын

There's left handed XM-18s out there.

@ReclusiveMountainMan 3 жыл бұрын

I think the market cooled because production went up (after they opened the new factory). We're seeing the same thing with Strider right now. Production less than demand. The current Hinderers have looser tolerances than the old Gen 4s. Now you're buying ZT technology at a Hinderer price point--with the ability to change out your pivot. Great marketing, but you're not getting the same knife.