How to Make a Simple Drill Press Table

No video

How to Make a Simple Drill Press Table

Рет қаралды 510,056

6 жыл бұрын

Today I am going to show you how to make a simple drill press table. The table is built to accept zero clearance inserts and has a fence with a stop block. After watching this video you'll be able to make a simple drill press table.
****FIND ME ON SOCIAL MEDIA
Instagram: / theaveragecraftsman
Twitter: / avgcraftsman
Facebook: / theaveragecraftsman
****BUILD ARTICLE:
tinyurl.com/ycget38l
****MATERIALS REQUIRED FOR THIS PROJECT
2 - 23″ x 14″ x 3/4″ plywood
1 - 24″ x 2-1/2″ x 3/4″ plywood
1 - 24″ x 2″ x 3/4″ plywood
1 - 24″ x 4″ x 1/2″ plywood (for 6 inserts)
1 - 2-1/2″ x 2-1/2″ x 3/4″ plywood
1 - 24″ x 1-1/2″ x 3/4″ hardwood
2 - 13-1/4″ x 1-1/2″ x 3/4 hardwood
1 - 24″ T Track - geni.us/TMtWk
1 - 36″ T Track - geni.us/4j2grf6
~2 - Packs #8 x 1/2″ Countersink Screws - tinyurl.com/ya56etkj
4 - 1/4″ - 20 x 1-1/2″ Star Knob - geni.us/dz6emU3
1 - Pack 1/4″ - 20 x 1-1/2″ T Bolt - geni.us/9d46CDG
1 - Pack 1/4″ - 20 Star Thru Knob - geni.us/skbpRmy
1 - Pack 1/4″ - 20 Threaded Inserts - geni.us/Y0RZypQ
Wood Glue - geni.us/OTITAC
****TOOLS USED IN THIS PROJECT
Craftsman Drill and Impact Driver - geni.us/yzREx2
Bosch Router - geni.us/CqVydG
WEN 12″ Drill Press - geni.us/u0X3QB
SawStop CNS Contractor Table saw - geni.us/bropyjj
WEN 4″ x 36″ Belt/Disc sander - geni.us/DkASCk
WEN Oscillating Spindle Sander - geni.us/hEBa
Dewalt Random Orbital Sander - geni.us/ebPt
Bosch Glide 12″ Miter Saw - geni.us/waPb
Craftsman Cordless Jigaw - geni.us/Ir9l7ZL
Microjig GRR-RIPPER - geni.us/Qo1O
Microjig GRR-RIP Push Block - geni.us/3WkGsF8
Dewalt 8″ Dado Set - geni.us/AUrrCG
****SUBSCRIBE TO MY CHANNEL - / @theaveragecraftsman
Music by: David Cutter Music - www.davidcuttermusic.com

Пікірлер: 485

@KPlainfeather08 10 ай бұрын

Really liked the overall quality of the unit kzfaq.infoUgkxajoEbapTfqWaadnqb04h6U576yxXp-FE . No, it's not a professional level drill press. I bought this product for one reason and one reason only: it adds value to a product I already have (a dremel tool).I was able to use this tool to secure my dremel. Dremel owners and users probably can sympathize that often holding your oddly shaped (and sometimes fragile) workpiece and the dremel at the same time can be cumbersome. This completely eliminates the need to hold the dremel, which is a huge overall improvement to control.I would consider this a must have for anyone who regularly uses a dremel.

@peterjones6733 Ай бұрын

Best home made table I’ve seen so far. Intend to make one for my bench press. Absolutely loved the ‘offset insert’. Puzzled until you explained the rotational aspect. Just a totally brilliant tip!!!

@TheAverageCraftsman Ай бұрын

Thank you, Peter. I appreciate you watching the video and taking time to comment.

@fredio54 2 жыл бұрын

All the comments talk about the drill press table. Screw that. Had me hooked from the cricket kets, well played. Hilarious. Subscribed. :-)

@bistokidok Жыл бұрын

I’ve looked at a lot of drill press tables on KZfaq this is the one I’m gonna build. 😊

@kf0017 6 жыл бұрын

Finally, some one who values their fingers and uses a guard on a table saw. Great project too. Thx

@TheAverageCraftsman 6 жыл бұрын

You bet!

@ELCADAROSA 2 жыл бұрын

Clean and simple. Very nice! The offset is a great idea! Though I may make mine circular. That way, instead of having just four sacrificial spots, there would be a dozen or more, depending on the wear of the sacrificial piece.

@CReevesMakes 6 жыл бұрын

I have needed/wanted a drill press table for some time and this has always been rollin around in my head as to what features I wanted. I think you nailed it and thanks for the inspiration! Keep at it!

@TheAverageCraftsman 6 жыл бұрын

Awesome! Thank you!

@rogerwolf9752 3 жыл бұрын

This is exactly what I need for my Drill Press. I do believe this will be my next workshop project. Thank You!

@TheAverageCraftsman 3 жыл бұрын

Thanks, Roger! Good luck on your build!

@HyperactiveNeuron 4 жыл бұрын

Great build. I love the idea about off-setting the insert. I had not thought about that. I'm going to modify my plans to add that for sure.

@TheAverageCraftsman 4 жыл бұрын

Glad it was helpful! Thanks for watching

@anthonypaul1757 6 жыл бұрын

Thanks for the video. The off-centre insert is a great idea.

@TheAverageCraftsman 6 жыл бұрын

Thanks! It works really well.

@earlstrohmeyer486 4 жыл бұрын

I just followed your plan to build my drill press table and I'm really happy with it! I watched a bunch of videos with different plans for drill press tables, but I liked your overall design the best! Great job!

@TheAverageCraftsman 4 жыл бұрын

Awesome! Thanks, Earl!

@twopoolpeople 5 жыл бұрын

Great video and build. Just what I need. Many thanks. Sure beats my 20 year old plain 3/4" plywood top!

@TheAverageCraftsman 5 жыл бұрын

Thanks!

@marcuspullan1142 Жыл бұрын

Just what I want. I have same drill press. Glad I checked your list of parts. Had a few questions that were answered there.

@bklynkrash 4 жыл бұрын

Watched it, made it, love it! Thank you!

@TheAverageCraftsman 4 жыл бұрын

Thanks!

@reddlief Жыл бұрын

I appreciate your common sense, simple language, detailed explanations. Your videos are well paced and focus on each step. Good job...I've subscribed.

@deucerider430 3 жыл бұрын

Great design! I know where I'll be this weekend! Even the little relief to pick the insert with - WOW!

@TheAverageCraftsman 3 жыл бұрын

Thanks for watching!

@quicksketch7 6 жыл бұрын

Wow, this is way above "average" work! I learned a lot just watching the interstitials between explanations. You've got some nice jigs and techniques in there with your tablesaw and clamping.

@TheAverageCraftsman 6 жыл бұрын

Thanks, Nate. I appreciate that.

@jpemanuele8568 4 жыл бұрын

I've wanted to build one of these for a while. You sold me on the offset waste board. Cheers!

@TheAverageCraftsman 4 жыл бұрын

Thanks for watching! Good luck on your build.

@DavidSiegelVision 4 жыл бұрын

This is not only a well thought-out table but very well lit, shot, and edited video. Thank you.

@TheAverageCraftsman 4 жыл бұрын

Thanks, David!

@revon0521 4 жыл бұрын

Exactly the build video I've been looking for. Thanks so much for sharing your ideas and skills. Totally subscribed!

@TheAverageCraftsman 4 жыл бұрын

Thanks, I appreciate the comment and sub!

@terryrobinson3016 5 жыл бұрын

Excellent drill press table well done. You've just earned yourself a new subscriber. Regards from the UK.

@TheAverageCraftsman 5 жыл бұрын

Thanks! And thanks for the sub!

@csimet Жыл бұрын

Nice build... I'll be making a slightly smaller version for my 8" bench-top Craftsman. The only change I'll do to your design is to make the fence to base t-track holes slots to allow the fence to be angled when needed. I think 1-2" slots will work nicely and allow the fence to sit at an angle (like how a router table fence works).

@chrisybradshaw8594 6 ай бұрын

yep defo my next project ,thanks for sharing,

@Bonezz024 4 жыл бұрын

Awesome video up and down! No extra monologue, stories etc. Music / editing were great And the best part.. I cant believe how many things I learned from this one video! Looking forward to Future vids. Thanks for sharing man.

@TheAverageCraftsman 4 жыл бұрын

Thanks!

@RISENGRINDWORKSHOP 4 жыл бұрын

Great video. I will be ordering the same press and will need to build a table as well. Thanks for the upload this will serve as a great reference! Well done.

@TheAverageCraftsman 4 жыл бұрын

Thanks!

@antonleimbach648 5 жыл бұрын

Great video, thank you for posting!

@TheAverageCraftsman 5 жыл бұрын

My pleasure. Thanks for watching!

@marrazzowoodworkingdiy8118 4 жыл бұрын

Love the open. Made me laugh out loud. Thanks for the video. Nicely done.

@TheAverageCraftsman 4 жыл бұрын

Thanks, Michael!

@ron5935 4 жыл бұрын

I made one for my Montgomery Ward electronic variable speed drill press some time in the 70`s. It is still on there. Differences are there were no T tracks. I used a 6” tall fence with 6” base, 4 right angle triangles to brace it, C clamps to place in position on each side. Crude but it works. I may upgrade.

@brtlonghorn 5 жыл бұрын

Great intro, and great build. I think I'll deff be copying that.

@TheAverageCraftsman 5 жыл бұрын

Thanks for watching!

@jacquesdespadas 7 ай бұрын

Great vid! I have the exact same model, and that crank handle is such a pain. I liked your work around. I need to build something better than what I slapped together the first time. I’ll be rewatching this when the time comes. 🙌

@vahntalur7273 5 жыл бұрын

Love your mild yet wild sense of humor! (Tee Hee) I think "I'ma gonna" copy your drill press table from the ones I've seen.

@TheAverageCraftsman 5 жыл бұрын

Thanks!

@gradeez 3 жыл бұрын

That sponsor bit is killing me! 🤣🤣🤣🤣

@tommccall7540 2 жыл бұрын

Hi, new comer here. Thanks for this drill press table. It has great ideas which allows me to upgrade my present build. Thanks. 👍🏻🇺🇸

@jcampbell2150 5 жыл бұрын

Very funny intro! Loved the design to offset the insert to be able to reuse the same insert four times. Keep up the good work!!

@TheAverageCraftsman 5 жыл бұрын

Thanks!

@NFSU2Master 5 жыл бұрын

@@TheAverageCraftsman Same here. First time I came across the offset in a video about drill press table. Great idea!

@sterlingrager7703 5 жыл бұрын

I have the same drill press. Great addition to my shop! Thanks for the detailed instructions

@TheAverageCraftsman 5 жыл бұрын

You're quite welcome. Thanks for watching!

@rmhutchins7 5 жыл бұрын

I enjoyed your video. It was very helpful. Thank you!

@TheAverageCraftsman 5 жыл бұрын

Thanks!

@danahollinsworth2314 5 жыл бұрын

Ha Ha HaI Laughed my ass off when I was waiting for the sponsorship commercial that always comes at the beginning and then it didn't. You are hilarious and I replayed it a 2nd time just to laugh. Great video for showing how to build a drill press table and also how to overcome the obstacles that always pops up during a build.

@TheAverageCraftsman 5 жыл бұрын

Thanks for watching! I appreciate it!

@root1657 6 жыл бұрын

Great project, and I love the removable insert. I only think I'll use a chisel to square out the corners in the hole for my insert so I don't have to round off the corners every time I make a replacement.

@TheAverageCraftsman 6 жыл бұрын

I am not great with a chisel so I figured I would have better luck rounding the corners. 😬 Thanks for watching!

@drcliffk 4 жыл бұрын

Outstanding Presentation and demonstration. Thanks for taking the time to put all of this together for us. Great job....

@TheAverageCraftsman 4 жыл бұрын

Glad you enjoyed it!

@benbrubaker7896 5 жыл бұрын

Nothing average about this table, sir. Subscribed.

@TheAverageCraftsman 5 жыл бұрын

Thanks!

@misfit4777 3 жыл бұрын

Dig it. I had a similar project in mind after picking up a WEN 4214 just recently.

@TheAverageCraftsman 3 жыл бұрын

Thanks for watching!

@MrRazorsReviews 4 жыл бұрын

I to have a lot of WEN tools, I love them. Not bad tools for the money. Great job!

@TheAverageCraftsman 4 жыл бұрын

Thanks! Yeah, they are good starter tools. I dont regret most of them.

@SuperKwame1 5 жыл бұрын

Excellent detailed info. Thanks.

@TheAverageCraftsman 5 жыл бұрын

Thanks, I appreciate that!

@ericsadventuresandhobbies2490 5 жыл бұрын

Nice build and details to go along with it. Subbed and looking forward to some more videos. Also liked the outfeed table build. Keep em coming.

@TheAverageCraftsman 5 жыл бұрын

Thanks! I appreciate. More vids in the work.

@ExplicitSpirit 2 жыл бұрын

Love your videos. You explain things very well and go step by step, definitely one of the better makers on KZfaq. Subbed!

@TheAverageCraftsman 2 жыл бұрын

Thanks! I appreciate the comment!

@ericeide6230 3 жыл бұрын

Only about 30 seconds in but you already get a like button from me lol your "ad-sponsor" convinced me

@TheAverageCraftsman 3 жыл бұрын

Thanks!

@terry2346 3 жыл бұрын

Nice design! Only thing I would do differently is to extend the T track in the front so you could slip in some homemade hold downs without having to take off the fence. Love the offset waste board idea! Gonna totally use that one!

@TheAverageCraftsman 3 жыл бұрын

Yeah, that's been mentioned a few times and it's a good idea. It was a brain fart on my part more than anything. Thanks for watching!

@johnmack537 10 ай бұрын

Without accommodation for clamps in the T-track, there’s no reason to have the T-track extend to the front of the table: the fence will never be positioned there.

@keithcarlson6038 5 жыл бұрын

Nice idea on the table insert!

@TheAverageCraftsman 5 жыл бұрын

Thanks! It’s my favorite feature of the table. Worked out great so far.

@ronalddean4834 3 жыл бұрын

Great job plain simple and well done. I'm. Subscribed and looking forward to more projects. Thanks for sharing

@TheAverageCraftsman 3 жыл бұрын

Thanks, Ronald! More content on the way soon.

@kevinsweden9209 5 жыл бұрын

I'm hooked, very nice job keep it up.

@TheAverageCraftsman 5 жыл бұрын

Thanks, Kevin. I'll try!

@meangreen7389 5 жыл бұрын

Having the all the tools you used, this is a simple project.

@b1j 6 жыл бұрын

That's exactly the table I'm getting ready to build. My fence will have dust collection, and I was not clear on how I was going to make the sacrificial insert on the table, so I'll think about your plan. Well explained; well demonstrated; well done.

@TheAverageCraftsman 6 жыл бұрын

Thanks for watching! I've been tossing the idea of dust collection around but can't figure out the approach I am going to take.

@b1j 5 жыл бұрын

If I knew how to upload a photo here, I could show you how I did it. It's finished and it works great!

@befmx31 5 жыл бұрын

Loved the "word from our sponsors" bit.

@TheAverageCraftsman 5 жыл бұрын

👍

@ot9180 5 жыл бұрын

Very good. I think I will use your design as a reference. There is nothing to change, perhaps making the sacrificial piece circular rather than a rectangle. Thanks very much

@TheAverageCraftsman 5 жыл бұрын

My pleasure. Good luck!

@MrKen-wy5dk 4 жыл бұрын

My thumbs up for your intro. SUBSCRIBED!

@TheAverageCraftsman 4 жыл бұрын

Thanks, Mr Ken!

@edwardmanfredi121 4 жыл бұрын

Nice job. I like table and great video of the build. TY

@TheAverageCraftsman 4 жыл бұрын

Thanks, Edward!

@pixelbender896 5 жыл бұрын

Just found your channel man. I love the way you explain things, videos are easy to follow and I hope you've got some sponsors now. Keep it all up brother

@TheAverageCraftsman 5 жыл бұрын

Thanks, Nik! Appreciate the comment!

@chair2930 4 жыл бұрын

I really appreciate the amount of effort you put into the production and editing of your videos. Very well done!

@TheAverageCraftsman 4 жыл бұрын

Thanks, Wesley!

@elsdp-4560 5 жыл бұрын

THANK YOU...for sharing.

@TheAverageCraftsman 5 жыл бұрын

My pleasure. Thank you for watching!

@KyokushinKichiKai 5 жыл бұрын

Great job, thanks Sir!

@TheAverageCraftsman 5 жыл бұрын

Thanks, Skip!

@loriann919 3 жыл бұрын

Loved this video and am going to build it exactly the same way. Thanks for making this video. I even have the same drill press and already love it but will love it more after the table is finished. Again, thanks

@brucewilson3170 3 жыл бұрын

The idea of putting the inset in offset is a great point.

@TheAverageCraftsman 3 жыл бұрын

Thanks!

@helly5444 4 жыл бұрын

Loving the sponsors :)

@squarelevelplumb 3 жыл бұрын

Great job, Average. Nicely done.

@TheAverageCraftsman 3 жыл бұрын

Thanks for watching!

@owenkonski5210 3 жыл бұрын

Very helpful. Thanks bunches. I am dually subscribed. North of the 49th.

@thehobbyfanatic4610 5 ай бұрын

Great build man! Come back and make more content!

@RobertBrown-rc6lu 5 жыл бұрын

Nicely done. Gonna make one myself.

@TheAverageCraftsman 5 жыл бұрын

Thanks! Let us know how it goes.

@kevinashby3784 5 жыл бұрын

Great work simple design but very efficient

@TheAverageCraftsman 5 жыл бұрын

Thanks, Kevin!

@MidnightMaker 6 жыл бұрын

Welcome to the party! Looking forward to more vids.

@TheAverageCraftsman 6 жыл бұрын

Thanks a lot!

@jeffbeck6501 5 жыл бұрын

Subscribed. Beautiful table. It makes work safer too. This project is great for many people. And I may add a table to my drill press. But really, instead, or in addition to, I want more of a multi-spindle, multi-tool CNC setup under a long set of CNC pedestal rails, like one long X axis, with a carriage that has a 4 motor Z axis, with a Y axis setting on top of that. With say 5 or 6 spindles, all permanently tooled up, or at least for a given job, with the assumption that you can do the job with different 6 tools. For the money that you can buy a tool changer, and the tool holders, you can probably buy a bunch of spindles, some of which may can be lower power, and be able to multiple "cars" on the long X axis, forming an assembly line that for about the same money, can run much faster than a single CNC with a tool changer.

@TheAverageCraftsman 5 жыл бұрын

Yeah, I wouldn’t mind something like that either. Ha! Thanks for watching and commenting. I appreciate it.

@septimuspretorius250 6 жыл бұрын

Nice Job!! Great explanation!! I learned something. I just subscribed.

@TheAverageCraftsman 6 жыл бұрын

Thank ya, sir!

@blasenrriquez2489 5 жыл бұрын

Woooooo excelente diseño saludos desde toluca

@TheAverageCraftsman 5 жыл бұрын

Thanks!

@greaterpittstonhistoricals2111 5 жыл бұрын

First time viewer and most recent subscriber. I've watched 6 different videos on drill press table builds and hadn't seen exactly what I was looking for - until I watched the 7th video - yours. I now feel I'm ready to start the build tomorrow. Thanks for everything!

@TheAverageCraftsman 5 жыл бұрын

Thanks for watching! Good luck on your drill press table.

@greaterpittstonhistoricals2111 5 жыл бұрын

It's done! Came out perfectly! Thanks for the help!

@raptors3164 5 жыл бұрын

Excellent job and video, I just subscribe. Thank you for sharing your talent.

@TheAverageCraftsman 5 жыл бұрын

Thanks!

@dennisgroce6247 5 жыл бұрын

Great job, great video!

@TheAverageCraftsman 4 жыл бұрын

Thanks, Dennis!

@ryanmcmanamon6063 5 жыл бұрын

Thanks. This is my next build

@TheAverageCraftsman 5 жыл бұрын

Thanks for watching, Ryan! Good luck on your build!

@pfboards 5 жыл бұрын

Thanks, great video!!!

@TheAverageCraftsman 5 жыл бұрын

Thanks. Pedro!

@garyfairbrother5532 5 жыл бұрын

Great video! I’m gonna build one. Good solution for the table crank clearance issue too. I might take one of my sacrificial inserts and glue it to the bottom of a cookie sheet or maybe a metal pie pan to use when drilling or countersinking metal stuff ( to contain shavings, cutting oil). Just a idea I had to save time removing the table for messy, nasty stuff. I subscribed!

@TheAverageCraftsman 5 жыл бұрын

Thanks, Gary! Good idea on the cookie sheet. Thanks for subscribing!

@vermarc1 5 жыл бұрын

nice idea I hate having to move attachments like that off and on for just a quick one time need.

@philippe5394 5 жыл бұрын

Very good. This is a good design!!

@TheAverageCraftsman 5 жыл бұрын

Thank you!

@mishocallander5293 6 жыл бұрын

Tip with the stop block. If you put a little chamfered edge on the bottom corner of it when there is saw dust and gear it’ll push into that chamfer not between the work piece and stop block

@TheAverageCraftsman 6 жыл бұрын

Thanks. You are correct!

@SamSam-us2fh 5 жыл бұрын

Great job 👏🏻

@TheAverageCraftsman 5 жыл бұрын

Thank you!

@EYALAVRAHAMI 5 жыл бұрын

Great vid!

@TheAverageCraftsman 5 жыл бұрын

Thank you!

@SQLKC 4 жыл бұрын

Clever edit changing our the brake on the sawstop blade change. I know why you did it and understand. Good job 👍

@TheAverageCraftsman 3 жыл бұрын

Thanks 👍

@fowldogwoodworking4202 3 жыл бұрын

I love the intro!

@TheAverageCraftsman 3 жыл бұрын

Thanks!

@Mephistaufeles 6 жыл бұрын

Great video Man - may you quickly build subscribers and sponsors.

@TheAverageCraftsman 6 жыл бұрын

Thank you for your comment!

@billwhite6743 6 жыл бұрын

Well done.

@TheAverageCraftsman 6 жыл бұрын

Thank you very much!

@herbkempf9939 5 жыл бұрын

Nice table. Great video.

@TheAverageCraftsman 5 жыл бұрын

Thanks for watching!

@AngieWilliamsDesigns 5 жыл бұрын

Great project.

@TheAverageCraftsman 5 жыл бұрын

Thanks!

@sumosprojects 6 жыл бұрын

Very cool mate 🍻👍👍👍

@TheAverageCraftsman 6 жыл бұрын

Thanks! I appreciate that!

@meatwhisperer 6 жыл бұрын

Great video!

@TheAverageCraftsman 6 жыл бұрын

Thanks!

@jamesblevins6078 4 жыл бұрын

Well done!

@TheAverageCraftsman 4 жыл бұрын

Thanks, James!

@wswerv1 6 жыл бұрын

Nice job!

@TheAverageCraftsman 6 жыл бұрын

Thanks!

@g.fortin3228 4 жыл бұрын

Thats a great vid and the table is basic but very good. One thing I wondered is why the maple front edge didnt have cutouts for sliding the fence off, and for sliding adjustable hold-downs onto. But thats a simple mod. And I like your design. great stuff

@TheAverageCraftsman 4 жыл бұрын

It was a brainfart on my part. If I ever need to I can go back and chisel out the channels but so far I haven't needed to. Thanks for watching!

@barryroberts6470 6 жыл бұрын

Another great, well explained build. Well done and keep up the good videos and builds. Barry (ENG)

@TheAverageCraftsman 6 жыл бұрын

Thank you very much!

@gpdoyon 3 жыл бұрын

Well done, sir!

@TheAverageCraftsman 3 жыл бұрын

Thanks!

@rodfletcher9937 2 жыл бұрын

Now on my to do list just subbed

@TheAverageCraftsman 2 жыл бұрын

Thanks!

@MrGavo57 6 жыл бұрын

Great video thank you

@TheAverageCraftsman 6 жыл бұрын

Thanks for watching!

@watcherdude1330 5 жыл бұрын

First time viewer and newest subscriber. I like the style of your video. And your explanation and camera shots were spot on. I look forward to seeing more of your projects. Take care and be safe.

@TheAverageCraftsman 5 жыл бұрын

Thanks! I look forward to getting some new videos out in the next couple of months. Been swamped with a house flip for a while now and ready to get back into the shop!

@stevenrey56 5 жыл бұрын

Nice build. I think I'll make one.

@TheAverageCraftsman 5 жыл бұрын

Thanks! You should, this one has been a great addition to my shop.

@mikeharvey6061 6 жыл бұрын

Nice video. Thanks for making /sharing it. One other video I watched on drill press tables they uses a circle instead of the square design for the area to be damaged when you drill thru and then could just rotate it abit to have a fresh area.

@TheAverageCraftsman 6 жыл бұрын

I thought about that but figured cutting out circles would be a lot more time consuming than the way I did it. Definitely a good approach though!

@Vessekx 4 жыл бұрын

The Average Craftsman, get a big-ass hole saw, and size the ‘socket’ in the table to the size the hole-saw produces. That way, creating a new insert is a simple matter of popping the hole saw into the press, and cutting out a set of inserts all at once.