Engraving large items

No video

Engraving large items

Рет қаралды 20,039

2 жыл бұрын

My latest method for securely engraving oversized items with the XTool D1. I use an existing jig to create the most secure method yet. Although the jig modification does require some tools, it is very useful for oversized pieces. The sculpfun enclosure was donated to me for a previous video, at that time I wasn't sure if I had a need for it. I finally put it to work.
For templates that I have made, check out my Etsy shop. I build files for projects and tools for the XTool D1.
www.etsy.com/shop/TheClackShack
The links below are affiliate links that will direct you to the product in this video. If you use this link for a purchase, I will receive a commission from the purchase. I remain unbiased and honest in my assessment as always.
XTool Website
www.xtool.com/?ref=TheClackSh...
Amazon links
D1 bundle that I have on Amazon:
amzn.to/3sJRPMC
Sculpfun laser enclosure
amzn.to/3RlQdTV

Пікірлер: 50

@teresa6775 9 ай бұрын

You do SO much and spend SO much time teaching and showing others how to use their engravers...and you do it all expecting nothing in return. Kudos to you and thank you !!

@TheClackShack 9 ай бұрын

You are so welcome!

@fjrempel 2 жыл бұрын

Was looking forward to seeing the finished project. Really enjoyed the video - thanks.

@TheClackShack 2 жыл бұрын

Glad you like it..

@AlienLeader4 2 жыл бұрын

Thanks for all the information. keep up the great work.

@TheClackShack 2 жыл бұрын

Thanks, I enjoy the opportunity

@rebeccacaron8982 Жыл бұрын

Thank you….I have a new XTool pro and I’m learning how to use it….👏🏻👏🏻👏🏻

@TheClackShack Жыл бұрын

Hope you enjoy it.

@highperformancebassboats Жыл бұрын

Thanx for sharing. I'm learning a lot from you!

@TheClackShack Жыл бұрын

Thanks for watching. I am glad it helps

@jefferymccaleb7536 2 жыл бұрын

Great video and knowledge! Thanks

@TheClackShack 2 жыл бұрын

Thanks

@gerritgeldenhuys2763 5 ай бұрын

Never heard of a stove cover before.

@TheClackShack 5 ай бұрын

I sell lots..

@jlathem56 2 жыл бұрын

Cool project. And it's nice to hear another Alabamian's accent. I guess it's been too long since I have been home.

@TheClackShack 2 жыл бұрын

I didn’t know I had an accent…lol

@jlathem56 Жыл бұрын

@@TheClackShack - LOL. I am from Alabama too and I didn't realize I had one too until I moved to Illinois for 8 years. There must have been 1 or 2 people a month ask em where I was from because they couldn't place the accent. Lol

@debschoen5581 2 жыл бұрын

Great show!! Say how long till Maymay's ink bandit be made to buy? It looks awesome!!!

@TheClackShack 2 жыл бұрын

Very soon!

@geraldlamothe6091 2 жыл бұрын

Nice job...If you put a wood sealer before staining you would get a more even coat over your work piece...Cheers!

@TheClackShack 2 жыл бұрын

The variations in the grain is what they love. Apparently without it, it doesn’t look rustic… That’s the way they like them.

@geraldlamothe6091 2 жыл бұрын

@@TheClackShack All I can say is...Keep giving them what they love!!!In my part of the world they like the modern but still rustic look...Meaning they want it all even, with a rustic look...I prefer your way but, it does not sell well where I live...

@neilberkeley5469 2 жыл бұрын

Great video as usual What are your preferred setting for pine boards for a nice deep engraving? Thank you

@TheClackShack 2 жыл бұрын

With my 10 watt, I run 40mm/s at 100%

@neilberkeley5469 2 жыл бұрын

@@TheClackShack thank you 👍

@jesgonzalez1986 Жыл бұрын

I really enjoy your videos and have learned a lot! However I've never worked on ammo cans. What would you recommend as far as settings using the 10watt?

@TheClackShack Жыл бұрын

They engrave very similar to a tumbler. I run 60mms at 100%

@jesgonzalez1986 Жыл бұрын

@@TheClackShack thank you! Is it just one pass?

@TheClackShack Жыл бұрын

@@jesgonzalez1986 , I ran 2 just to be sure all of the paint came off

@jesgonzalez1986 Жыл бұрын

@@TheClackShack Copy that. Thank you sir.

@pattimaystone8953 2 жыл бұрын

I want one of Maymay's Ink bandits! When can we order them???

@TheClackShack 2 жыл бұрын

They are coming.. She hit me at a very busy time. hopefully soon. Thanks

@Silentcriessouthtx 2 жыл бұрын

Hey, I am doing a birch square drum. Laserbox. Any help? Really don't wanna mess this up for the client.

@TheClackShack 2 жыл бұрын

Take your time, I have engraved some really expensive pieces and it is nerve wrecking.

@mape556 Жыл бұрын

Hi Clack Shack, Do you know how to lower the xTool D1 diode lower than the lowest setting? I have a smoke enclosure that raises the D1 by 4.77mm (3/16 inch) which means if I try to laser a large item by sitting the D1 inside the enclosure on top of what I need to engrave, it's 3.55mm (3/64 inch) too high when the D1 is in the lowest setting. Any suggestions?

@TheClackShack Жыл бұрын

You could shorten the legs or bring the work surface up.

@lorenzorivera6612 9 ай бұрын

Really hoping you could help, why does my d1pro 20w onky allow me to cut items around 12"x12"....the size of the honeycpmb is 24"x24' but i can use that area for some reason. Any help would be greatly appreciated

@TheClackShack 9 ай бұрын

What software are you using?

@TheClackShack 9 ай бұрын

message me here so I can send pics and we can correct it. KZfaq isn;t really set up for messaging

@jakerazmataz852 Жыл бұрын

Is your air assist strong enough to blow off the work?

@TheClackShack Жыл бұрын

Not sure I understand the question. It does not move the workpiece if that what you mean.

@torowazup1 Жыл бұрын

👍🏼👍🏼👍🏼👍🏼👍🏼👌🏼🍎😎

@TheClackShack Жыл бұрын

Thanks.

@torowazup1 Жыл бұрын

@@TheClackShack left you a message on Etsy.

@Eric-bh6ie Жыл бұрын

we call it 'cut throat's" where I'm from lol js costumer's looking for a product will pay for it regardless. so why cut urself short? you'll just find urself working more and harder. no offence bud

@TheClackShack Жыл бұрын

Not sure what you are talking about but ok..

@gilbertboyer9936 2 жыл бұрын

Yak yak, waffle waffle. Man this is not a good video. We've seen everything but engraving a large item. We've seen woodworking and mostly your back. Please bud, a word of advise, please look at how some of the other guys do a video presentation. A good example would be Paw Paw's workshop. He is focused, precise and to the point. Sorry for the bad review.

@TheClackShack 2 жыл бұрын

I do me, sorry you don’t like it.