Steady Craftin videos are made with the help of DIRECT SUPPORT: www.patreon.com/steadycraftin (You'll also get access to the printable 3D scans of my original sculpted figures, MP3s, exclusive behind-the-scenes videos, shop discounts, and more.) My family and I are so grateful that I get to do this.

"The answer to this question and many more is...yes." He ain't lyin'.

"This particular brand right here is Limino, but if that's not the correct pronunciation just lemme know." I love it Crafsman, made me laugh so hard once I got the joke!

“This two shall pass.” Keep steady craftin’, everybody!

CrafsMan glossary: 'thicknicity' = experimental viscosity

Crafnese: A rare language only understood by about 309k people in an isolated, remote corner of YouTubia. Or maybe about 275k. 310k. About 250k though. No more than 315k. Probably about 287k.

Time for another music video, friend: "Don't Point UV Lights At Your Face." Keep crafting, be well. :)

This comment, and the like I entered, certifies my engagement with the above content for the purposes of algorithmic representation. Love you, Crafsman.

"As you can see, I got my gloves on today for this project" Crafsman, are you implying that you're not usually wearing gloves?

"If this is not the correct pronunciation, Lemino." I literally laughed out loud. Great video as always Crafsman.

"this 2 shall pass"! lol

"This 2 shall pass" I haven't laughed so hard in months!

Its hard to describe how wonderful it is to get a notice that you’ve just uploaded another video. Keep’m coming, please! I need the vibe.

This is the kind of informative and hilarious video that demonstrates that Crafsman is the funniest man on KZfaq and possibly the best person as well.

"This Two Shall Pass". Laughed and cried at the same time...

I think Crafsman’s image is burned into my ret-n, my eyeballs!

What a fantastic resin! Our first thought was to use it as a gloss for your figure's eyes. We've used epoxy for this in the past, but this seems much quicker and cleaner.

I found your channel earlier this week, and I can't get enough of your videos. I admire your DIY ethic and it reminds me of the channels that were the backbone of this website in its early years. Thank you for not only giving me inspiration for future projects but also for entertaining us in hard times.

Crafsman ima be real with you. You need to stop being such a beautiful person because God’s gonna see your greatness and call you to the kingdom early. And if that happens where am I going to get such soulful inspiration? The world needs more people like you. Keep craftin man!

When you use the UV lamp, protect your eyes and balance the light by putting a sheet of cardboard or foil over the opening, also reduces curing time. Remove bubbles with a lighter onto the surface When using images or paper, the edges have to be sealed as well or it will soak in UV resin is pretty much a very quick product, you can just add colourants and stir it in, run a flame over the pour and all the bubbles pop then cure, no waiting needed

LOVE hearing the sound of those Spring birds outside your studio in this vid!

Love your videos crafsman! I'm a musician all cooped up with this quarantine - if you want any crafsman songs let me know! Lol it might be fun to try

Started experimenting with UV resin about a month ago. It is truly magical! In addition to casting and embedding things, it's wonderful for modeling and holding things together. You can glue glass together, even! As for pigments, glow in the dark powders work really well in UV resin. It looks really neat to swirl the powder into the resin- not mixing it up all the way. The swirls of powder look liike nebula. And using liquid colorants AND glow in the dark powder is really amazing!!

Just popping in to let you guys know that you can make molds for uv resin from small, hard objects using got melt glue.

We all need The Crafsman attitude. Get to crafting! Making things to send to friends to brighten up their day!!

Crafsman, a little pay-back .... I cut one end off my wooden stirring sticks so it's flat and can scrape the bottom of the mixing cup and get right into the edges. A decent pair of wire cutters - one snip is all it takes. Well worth doing. Try it.

You have quickly become my favorite channel on KZfaq. Like a modern day Bob Ross teaching people how to make cool stuff for not very much money. Thanks, CrafsMan.

Hey Crafsman, I introduced your videos to my friends and I grabbed myself a needle felting kit thanks to your video. It should be here tomorrow, I love your relaxing energy and passion for projects and crafts. To quote someone special I love y'all an keep SteadyCraftin' :)

No one: Crafsman: *whips out UV gun* Love your videos :D

Every time I watch a Crafs Man video, I regain a percentage of my soul that I lose each day.

Crafsman I want you to know. You are the only channel I have notifications for

Mr. TheCrafsman I want to thank you. Stuck at home as many of us are, your cheap DIY shirts video showed my niece and I something constructive to do while we're stuck home. I would like to one day use 3D printing to prototype and make toys and fun things in a small business sense, which you have covered extensively. Also your style- your patience, voice and perseverance- helps to relieve stress, anxiety and helps me forget depression for a time. You are blessed and I feel you are a blessing for those in the world like myself that may tend to think about things in that way. I have only known of your channel for a little over a week now but I have noticed something that is constantly predictable- I'ma hit that like button! Speaking of which...click. You and yours be well sir. We all love y'all too.

Crafsman out here doing the good work during Covid. You helped us all survive!

This 2 shall pass. Man you're a genius ☃️😂🤣

Sometimes I just gotta restart a CrafsMan video just to absorb the info he givin me. But everytime I restart a CrafsMan video, It's just to give myself a little bit of CrafsMan comfort.

Crafsman you are therapy, no matter what you talk about.💕

"This 2 shall pass" has me crying 🤣 ! It's all just in the delivery! 👍🏻

No "This to shall pass" but "This two (2) shall pass". Took me a minute. I love you, Crafsman!

I lost it at "This two shall pass" LOLOL Thank you!!

You are one of the funniest, and most talented men on KZfaq sir. Thanks you so much. 😂

My heart smiled so much when he kept sayin "ultraviolence"...lol!!

I have seen metalsmiths make the ring blank from separate pieces of metal soldered together. Didn't know about ready to use blanks! And, I happen to have a UV flashlight to see if certain things will glow, so now I have an option for my crafting skill set. Thanks again!

Thank you Crafsman. I hope you and Crafsmama are safe and well in these troubling times. We love you,and keep steady craftin'

I'm watching this during the corona thing and even though I can't see my friends I feel like the crafsman is a friend.

Crafsman, you're giving me soo many ideas right now, it's a regular Brainado! 🧠🌪🌪 Too bad you didn't mix the flower and the gears- you could've had a Wall-E thing going on. 🤖💮

Thank you for this video. I can't even begin to explain how much this helps. Also- "this too shall pass" cracked me up no end!

Crafsman I love your videos. As soon as I hear that “Hello” I’m already smiling. Me and my brothers are always talking your new videos when they come out. Thank you for everything you do.

I love you, CrafsMan. No doubt.

Another triumph, Crafsman. I thank you sir.

Oh man that surprise ASMR with the UV test portion was lovely. I really needed a little relaxation after work.

Can I just say this: I love you Craftsman! Thanks for all you do. :)

"This too shall pass" -Crafsman, you do crack me up!

Your videos always help me relax. Just your demeanor is so chill and uncomplicated. Plus your videos inspire me to create! There’s so much good about this channel.

"This too shall pass" love it man. Not only do I learn from you, you also make me smile and laugh. thank you

CrafsMan is love. CrafsMan is life.

you know it's going to be a good video when crafsman put his gloves on

CrafsMan, you seriously bring a tear of joy to my eye.

I have all this stuff, in a cupboard... because I'm afraid to craft. But Crafsman says not to be afraid so time to open the box

"Now there is no doubt in my mind that that right there... needs that right there." When I saw that lil bird, I gasped! It was so perfect! :D

Willow on VHS! Literally just finished watching that. Probably my favorite movie. Thank you for the resin tips!

Duuude, this video just turned into an unexpected crossover episode of old Crafsman episodes! Awesome!!

I’ve never once been into like asmr style videos like Bob Ross and such as a relaxing sort of thing but this channel just totally does it for me.

I keep hearing myself laugh during your videos ... it's a sound i don't get to hear often. Thanks crafsman.

A new Crafsman episode is like church. I am at peace.

😆I'm always hyped when I see the craftsman upload

Cabuchon pendants are back💪👌

Ultra violent light. :3 You have the same mold as my bestie for gems.

"This to shall pass." Love it, Crafsman, love it.

Thank you crafsman!! I started making molds and melting my own silver to make characters and items out of! This is a great idea and now you have me thinking what might i be able to make using this! Much love and stay craftin! Peace Love and Crafin Grease! its from a movie called the pest in the opening scene he leafes the house telling his family peace love and chicken grease so i thought it was cool to say peace love and crafin grease.. hahah

Man that little synth jingle-theme-song-thing is SWEEEEET

I love how diverse the crafts are. Resin is how I found the Crafsman and I was going to look for a jewelry tutorial, but here is one that makes me crack up laughing. Glad you have been steady craftin' for so long and all the best to you and yours. BTW, I think it's wise to maintain your privacy by using a hilarious avatar. I started watching videos on KZfaq when the pandemic started and I see some really invasive comments from fans (on other channels) who are so adoring they'd likely rip someone apart trying to get at them in a frenzy like a school of piranhas. I'm not one of them, but I try to drop a comment when I can to support channels.

Thank you Mr. CrafsMan for the most relaxing videos on the internet! 🙏📹👍

THANK YOU! I feel much more comfortable now to play with paper designs and my resin molds. Love !

I love you too CrafsMan and I have kept steady craftin!

I sure do love this channel. Think I've watched about 50 videos in the last 2 weeks. It's been super inspirational. My own Craf Mama loves it too.

Coming back to this video to comment that I recently used some stuff called "Bondic" and when I realized it was just UV curing resin in pen applicator form, everything I leared watching this video really opened the doors to creatively using it. Thanks, crafsman!

'This 2 shall pass' classic, absolute classic :)

This is the kind of show kids should be watching, an honorable man, spreading truth and love in a calm and loving way and sharing stories and advice with a pure heart and showing us how to craft. Best wishes and much love to you and yours brother from The UK.

In today’s world you are very refreshing brother! Keep up the wonderful work!much ❤️

Mr Steady is a liberation in lock down. Keep it coming, please, and keep safe, :)

Love the puppet hands..someone watched copious amounts of the muppets and sesame st..love it..

I'm going to listen to your videos to fall asleep to. I love your voice

I see Crafsman, I hit the like button, no questions asked.

Most inspirational and soothing in this troubled times. Thank you so much

Best “This too shall pass” story EVER. Thank you CRAFSMAN!!!

You are a joy to watch and your inspiration is catching! But, your humor........BRiLLIANT!!!! Thank you for sharing your wonderful passion!

I'll admit I saved this episode for Monday morning. Because just hearing that "Hello~" in the beginning INSTANTLY put a smile on my face. Just the thing I needed to start today! Great idea, too!

Love the end sentiment! Im doing daily vlogs/ projects on my channel to help ease tensions and cabin fever till this right thar blows over!

If you go look at the UV flashlight on Amazon, one of the features they advertise is "reveals hidden scorpions!" just what I needed!

Much love to you and your family thanks for keeping us having fun!

Your voice is so soothing in the middle of uncertain times. Continue being crafty! Thank you!

I appreciate your encouraging words so much

Now I want to really try this. You figured out all the problems one might have already for us.

Stay craftin CrafsMan and stay safe.

When I get the notification there’s a new CrafsMan video, I feel like a kid waking up on Saturday morning excited to watch cartoons. Also, “this too shall pass!” Stop it, CrafsMan!!

I started giggling because I have almost everything you use in this video. I’ve been making pendants while self distancing!

I remember seeing something like that stuff advertised for making small repairs. Had no idea it could be used like this. That's awesome.

I'm so excited about UV resin it's so fast!!!

That joke to end was amazing!

I was hoping you would do caba-shaans. You never disappoint.