Get the MOST POWER out of your Laser by doing THIS in Lightburn!

Рет қаралды 12,506

10 ай бұрын

This is the best way to get inexpensive power out of your CNC Machine!
Check out FoxAlien using my Affiliate Link Here:
www.foxalien.com?sca_ref=3491064.Cgy97aKmUB
OR
Buy FoxAlien CNC Masuter Pro on Amazon here:
amzn.to/41XVVAK
Buy Your CNC Bits on Amazon Here:
amzn.to/3kTqjv9
Buy Your Calipers on Amazon here:
amzn.to/3KWO4NC
Note:
As an Amazon Associate, I earn from qualifying purchases.
Thanks for Watching! If you like what you watched... Please give us a thumbs up and Subscribe! Don't forget to click on the Bell to be updated on more uploads!
********************************************************************
Buy Your KalindsLife, JigginJunkie and Crawlspace Craftsman Merch Here:
www.Kalinds.Life
Check out this link!
linktr.ee/kalindslife
*********************************************************************
Want to help support our channel and drive to offer better content!? Visit our Patreon page at the link below and become a Patron of ours with a small support donation. This will give us the ability to do what we love and upgrade equipment, buy props and items for new videos and much more! Thanks so much for considering!
/ kalindslife
*********************************************************************
Click on the link below to order some AWESOME KalindsLife and More items!!! We get a small percentage of each sale and put all money made back into the channel so we can continue to make fun and exciting videos for you to watch!
shop.spreadshirt.com/KalindsL...
*********************************************************************
Also don't forget to Follow us on.....
Email: KalindsLife@gmail.com
Instagram: @KalindsLife
Discord: discord.gg/9dCxPEMtXY
*********************************************************************
Filmed On: GoPro 9 w/ Media Mod
Edited On: iMovie
Thumbnail Image: Thumbnail Maker
Microphone: GoPro 9 Media Mod
Music: EpidemicSound.com
*********************************************************************
#foxalien #cncmachine #cnc

Пікірлер: 68

@SimoneFestuccia 6 ай бұрын

DUDE, I LOVE YOU! It's 3 months i'm engraving with a 20W laser that barely does better than my previous 5W... and you know why? It was working at 3.9W.... Yesterday thanks to you i've unleashed all the 20W and filled the room with smoke...

@TheCrawlspaceCraftsman 6 ай бұрын

That is awesome! It’s such a common error and even I’ve done that with my lasers not realizing!!!! Glad it helped!!!

@mightydtwentycent5921 2 күн бұрын

@@SimoneFestuccia how did you know it was at 3.9W?

@granthogarth8318 3 ай бұрын

Brilliant! Thank you for solving a problem that I didn't know I had.

@TheCrawlspaceCraftsman 3 ай бұрын

LoL. I was in the same boat and figured I share the knowledge!! Thanks for Watching!

@parthmehta4105 10 күн бұрын

I’m using Sculpfun S30 Pro Max 20W laser, I tried before and after changing the setting, unfortunately the results were exactly the same! Thank you for the information though 👍🏼

@TheCrawlspaceCraftsman 9 күн бұрын

That’s odd it didn’t work. Wish I was able to help more! Thanks for working!

@slingerssecretlaboratory 8 ай бұрын

THANK YOU, Thank You, thank you!!!!! I was pulling hair trying to figure out this thing!

@TheCrawlspaceCraftsman 8 ай бұрын

Absolutely!!! Glad it helped out!!!

@KaroKhatchadoorian Ай бұрын

thank you for this!!!

@TheCrawlspaceCraftsman Ай бұрын

Absolutely!!! Glad it helped!

@user-qs9ml3gy2v 7 ай бұрын

Great! Thank you!

@TheCrawlspaceCraftsman 7 ай бұрын

Your very welcome !!!

@themetalfusionologist 10 ай бұрын

Bruh…you just solved the main issue I’ve been having. Thanks for the vid

@TheCrawlspaceCraftsman 10 ай бұрын

Fantastic!!! I have a feeling ALOT of peeps have this issue going on don’t even realize it! Happened to me too!

@mikepgff 3 ай бұрын

Good information, Thank you.

@TheCrawlspaceCraftsman 3 ай бұрын

Glad it helped!!!

@PedroGomes_27 6 ай бұрын

Just here to say that I love you! Thank you so king much

@TheCrawlspaceCraftsman 6 ай бұрын

Awe…. We love you too! 😂🤣😂. Glad I was able to help!

@cagtayc 7 күн бұрын

Thank you❤

@TheCrawlspaceCraftsman 7 күн бұрын

Awe Your Welcome! Thanks for watching!

@markbosworth5898 25 күн бұрын

My Lightburn Device Settings have no option to change the power.

@TheCrawlspaceCraftsman 24 күн бұрын

🤔. Hmmmm….. what kind of laser do you have? Diode or CO2?

@cheekyoscar1353 8 ай бұрын

absolutely true . The values have to be the same , it doesn't matter what the number is as long as they are the same on both screens .. * when you have got this setting correct then turn the "running laser "setting down if you feel your laser is up too high you do not necessarily need to cut at 100% in a lot of cases. But at least you know you can if you want to . good video 👍👍👍👍

@TheCrawlspaceCraftsman 8 ай бұрын

Thanks so much for watching!!!

@djkrazythug 10 ай бұрын

I have a 5.5watts can I apply this to my ortur and what would be the change right now both at 1000 thank you for your assistance

@TheCrawlspaceCraftsman 10 ай бұрын

So if both your setting match up you should be good. By adding a 0 to both… it won’t do anything “extra”. It doesn’t change the actual power of the laser. It only makes sure your machine is using its full potential which in your case is 5.5w. Hope that helped a little more and thanks for watching!!!

@Onurcann11 6 ай бұрын

Hi buddy, first of all thank you for the video, it sped up my cutting time which was quite slow but I'm wondering one thing, will this shorten the my laser life? will it break? or is this really the setting that it should have because when I connect my laser to my PC it automatic finds it and when it does it doesn't automatically load these settings to it?

@TheCrawlspaceCraftsman 6 ай бұрын

It will not. You’re not over clocking the power…. Just bringing it to 100% of its optimal power. Thanks for watching!!!

@mightydtwentycent5921 2 күн бұрын

@@Onurcann11 i think so laser life is reduced

@manitoulinmakers849 10 ай бұрын

only thing about using 100 percent power is it takes life from your laser.

@TheCrawlspaceCraftsman 10 ай бұрын

100% correct. I didn’t mention that in the video but I used it for the teaching purposes of the video. Much easier to get across the point with 100% rather than 87.5%. 😂. Thanks for watching!

@mickeeFPV 6 ай бұрын

So does running it for several hours to make the same cuts that would take 20 mino. I have a Laser Tree K 30 and would like to get at least 50-70% of its capable power output and cut materials in a reasonable amount of time. I spent all night trying to cut letters out for a sign and it wasn't pretty. Not to mention all the extra carbon I had to sand off the first layers and re cut ones that broke while doing so. I'm not an angry person but if I hadn't came across this information. I might have ended up on a primetime news segment about people who feel unhinged rage around technology

@user-sk5nr4yh8d Ай бұрын

I have to say that this method does not apply to all diode lasers. I have a Artur 20W laser and it cuts perfectly through 1/4" plywood at an S Value Max of 1000. So I cannot imagine setting it to 10000. But common sense tells me do not mess with good enough. I did like your video as you were informative, thank you.

@TheCrawlspaceCraftsman Ай бұрын

Totally understand. Sometimes the 1000/1000 works just the same. Just have to make sure the numbers match! Thanks for watching!!!

@user-om1zf7dp8g 10 ай бұрын

Dear blogger, hello, I would like to ask about the dust collector produced in China, the motor is 220V, how can it be used in the United States, do I need to connect another line.

@TheCrawlspaceCraftsman 10 ай бұрын

If it’s 220 your definitely going to need to install a 220 outlet with plug to match. I would consult with an electrician before you make any moves.

@panellmann1461 3 ай бұрын

Well now I feel stupid, I got a 24W laser as my first machine and I thought it was a bit weird that even on 100% power and 300 mm/min speed it barely cut through 4mm hardwood plywood, while other people in videos easily cut through 15 mm hardwood or even more with their 20 watts :D Thank you so much for this :)

@TheCrawlspaceCraftsman 3 ай бұрын

Don’t feel stupid! We’ve all been there…. Me too! Just glad it helped out!

@GSandra30 2 ай бұрын

I thought the exact same thing. I have a 24w as well and was having the same problem.

@mightydtwentycent5921 2 күн бұрын

@@panellmann1461 and now how many pass to cut your hardwood 6mm?

@bayuocta7042 Ай бұрын

thansk a lot for the video, it helps a lot. may i ask a out of topic question here ? i have a DIY setup laser engraver ( MKS DLC32 controller + laserTreee 40W AA ) , till now i cant get a perfect circles when i draw them. i dont find any misalign when i draw a square/rectangle. ive done manu calibration settings, but it still the same. any thoughts ? thanks

@roadcrayon1525 Ай бұрын

Do you hold down the shift key when you are dragging out your circle?

@TheCrawlspaceCraftsman Ай бұрын

Thanks so much! @roadcrayon1525 is 100% correct. If you hold shift…. Then drag your cursor…. It will stay a perfect circle. If you don’t it will be oblong. Worst case make sure you unlock the dimensions and hand type the exact same measurements you need in both Width and Height then Lock it again! Thanks for Watching!!!

@bayuocta7042 Ай бұрын

@@roadcrayon1525 i did. I always double check X and Y size. But when i engrave them , i cant get them perfectly circled.

@rcjarvis 8 ай бұрын

mine (Omtech k40+) was set at 1000 in both device and machine settings... so that should be ok.... ? Right ? Or do I put it to 10 000... and potetially burn the pow sup...

@TheCrawlspaceCraftsman 8 ай бұрын

1,000/1,000 is fine. If both are the same you’ll be running at true 100% power. 10,000/10,000 is the same too. It’s not telling to pump more power only a % of 100% power.

@rcjarvis 8 ай бұрын

@@TheCrawlspaceCraftsman THANK YOU VERY MUCH !

@MileyonDisney Ай бұрын

c o o l

@TheCrawlspaceCraftsman Ай бұрын

Thanks!!!

@hardshellconstruct 2 ай бұрын

Hi I have creality falcon 2 22 watt settings both say 1000 is that it's max or is it cutting full potential cheers

@TheCrawlspaceCraftsman 2 ай бұрын

I use the 10000 / 10000 numbers. Try that and see if it makes a difference.

@hardshellconstruct 2 ай бұрын

Thanks I try hope it OK for me lazer

@StanG1980 9 ай бұрын

Would this be the same for a 40w xtool d1pro 10000

@TheCrawlspaceCraftsman 9 ай бұрын

I would say if your using Lightburn then yes. I know xTool has there own proprietary software too so there I don’t know. Still waiting for xTool to reach out to me for a collaboration! 🤣