How to Change the Fork Oil on a KTM WP 48 (KTM EXC TPI)

Рет қаралды 54,644

Жыл бұрын

This video will walk you through the process of changing the fork oil on KTM WP 48 forks, which are usually seen on KTM EXC TPI motorcycles. Fork oil changes are an important maintenance task that can improve the suspension performance of your bike and extend the life of your forks. We'll go over the equipment and materials you'll need, as well as how to securely remove the fork legs from your bike and drain and replace the oil. Our article also provides useful tips and tactics to make the process easier and faster. With our help, you'll be able to confidently change the oil in your KTM WP 48 forks at home. Thank you for tuning in!
MERCH STORE: teespring.com/stores/the-dirt...
If you want to support the channel, you can do so by visiting our merch shop.
Join the membership to get access to Special videos:
/ @thedirtbikerider
Social Media:
Instagram: / thedirtbikeriderofficial
Facebook : / thedirtbikerider
Business contact : the_dirtbike_rider@hotmail.com

Пікірлер: 22

@emw5008 Жыл бұрын

I would be interested in a video on how you clean the cartridges. Also when you have the fork tubes removed, its a good opportunity to clean and repack the upper and lower stem bearings.

@1wheeldrive751 2 ай бұрын

Before you remove each fork leg, release just the upper triple clamp and leave the lower one tight, then crack the top cap loose. That makes it easier to get them off when you have them on the work bench.

@abdullahodabasi2139 Жыл бұрын

Nice job! The Next servicing video must be rear shock servicing video

@carcaridon Жыл бұрын

"Clean the forks as best you can " he knows too damn well that those of us who 1, love bikes 2, willing to do this stuff on our own will spend an hour on each polishing each one until 3 weeks later,you've resprayed,kitted and overhauled the whole bloody thing.!

@wadescherer 5 ай бұрын

I wish there was a bit more on cleaning the inside of the fork. A fork pro told me to spray everything with contact cleaner to remove the old oil. And also to pump the cartridge a few times BEFORE you put new oil in to pump the old oil out of it. Plus the torque specs for the bottom and top “caps” would be nice to have stated.

@mdoneg Ай бұрын

I’m getting a little shock oil leak at the bottom of the left fork. Any suggestions?

@konnerbarlow932 Жыл бұрын

What wrench are u using to hold the preload adjuster Nut. I can’t find one that fits between spring.

@imbadatthisgame1681 Жыл бұрын

Cut one out of an old socket

@lakawanRider23 Жыл бұрын

Nice 👍 work buddy

@maj100rinaracing Жыл бұрын

Sve jasno sad mogu sam 👍🏻👍🏻

@richardconnoly 10 ай бұрын

This video is great. When you mention: "You can set the (fork oil) height from 9cm to 13 cm" am I correct in my assumption this is the distance from the top of the fork down the the oil level?

@4x4American 9 ай бұрын

I wonder the same thing

@Exrimordonaj 4 ай бұрын

Yes

@miro_s 5 ай бұрын

do you measure the airgap with or without the spring?

@1wheeldrive751 2 ай бұрын

Without

@donproper3632 Жыл бұрын

Nice job right to the point I like when you don't have to listen to a joker

@Jacare1973 Жыл бұрын

Why wouldn’t you replace the seals? Most people are probably looking for the whole seal change.

@TheDirtbikeRider Жыл бұрын

i didn't needed it to replace at this time

@Runk3lsmcdougal Жыл бұрын

I'm not

@1wheeldrive751 2 ай бұрын

Seals last a long time, especially the high quality ones used on KTMs. Most of the time when they leak, it’s just dirt that got up under the oil seal. You can use a seal-mate (or make your own from a plastic bottle) to clear the grime from under the seal, without removing the seals and bushings. Keep your fork inner legs clean and you’ll hav fewer leaks. Gaiters help with that.