No video

Wltoys A959 Super Fast Brushless Conversion With DIY Arduino Remote!

  Рет қаралды 180,347

TheDIYGuy999

TheDIYGuy999

Күн бұрын

Wltoys A959 Off-Road Buggy Rc Car: goo.gl/fW8ase
Other RC Toys: goo.gl/gppM7z
Banggood Weekly Coupon Deals: goo.gl/D8B1Mu
Banggood Weekly Discount Deals: goo.gl/uGS7Lf
(8% OFF Coupon: ToysHo)
This video shows you, how to do a crazy fast brushless conversion on a Wltoys A959 4WD Vortex buggy.
As always, I will use my DIY open source Arduino 2.4GHz „Micro RC“ remote control system.
The original shocks will also be replaced.
Car: www.banggood.c...
Servo: www.banggood.c...
Brushless ESC and 4800KV motor: www.banggood.c...
Metal shocks: www.banggood.c...
LiPo battery: www.banggood.c...
Some links above are affiliate links. You can support the channel, if you use them. There are no additional costs for you. Thanks, guys!
The stability control upgrade video: • Brushless Wltoys A959 ...
The snow drift video: • Brushless Wltoys A959 ...
My GitHub: github.com/The...
Follow me on Twitter: / thediyguy999
on Flickr: www.flickr.com...
and on Google +: plus.google.co...

Пікірлер: 208
@TheDIYGuy999
@TheDIYGuy999 7 жыл бұрын
Hi guys. My longest video so far. Hope you like it. Please tell me your opinion. Thanks
@flamehawk1895
@flamehawk1895 6 жыл бұрын
TheDIYGuy999 all the parts in this video, How much did you spend? And did you have to buy a new Lipo battery?
@hydrainarms3135
@hydrainarms3135 6 жыл бұрын
TheDIYGuy999 have by any chance place a metal gear herd it suppose to keep the run smooth and tight.
@jonnyvolta4456
@jonnyvolta4456 6 жыл бұрын
long or short is enjoyed equally. Thank you
@Soccereddie
@Soccereddie 6 жыл бұрын
What gears did you end up putting in to replace the stripped gears, part numbers please:)
@emmacrockett568
@emmacrockett568 6 жыл бұрын
What dp and how many teeth for pinion and spur gear
@1peanut
@1peanut 4 жыл бұрын
I have 3 Remo Smax. they are great once i upgraded the shocks to oil. very durable trucks.
@RCRoads
@RCRoads Жыл бұрын
Nice upgrade. Nice run with the WLtoys. 👍👍
@IamJay02
@IamJay02 3 жыл бұрын
This looks really easy. Might make my a959b brushless In the future.
@POLITICALYCORRECTify
@POLITICALYCORRECTify 2 жыл бұрын
They go hard anyway for brushed ey.
@robertkelly5515
@robertkelly5515 4 жыл бұрын
Good conversion, could be a cheap way to get a good buggy, motor + esc only cost about £20 on Bangood.Either get this setup or just go all out and get the ZdRaptor Buggy, I trust ZD racing because of my positive experience with their d16 DRIFT CAR, really reliable. The A959 is quite reliable, my motor blew after about 3 months, I got bits here so they could be good spares if I get another, think I would go for the B version for the extra power. Rob
@TheDIYGuy999
@TheDIYGuy999 4 жыл бұрын
Thank you
@EBthere
@EBthere 3 жыл бұрын
Awesome job. Runs strong!
@deejaytrizay
@deejaytrizay 6 жыл бұрын
Seriously....I have this exact car and a brushless motor upgrade that I got from someone. I have no expert knowledge of RC cars...this video is GREAT! good job man. I am good with my hands and working with things but this helped! Thank you!
@TheDIYGuy999
@TheDIYGuy999 6 жыл бұрын
you're welcome
@Gabriel83580
@Gabriel83580 6 жыл бұрын
Looks like you need some down force now. Side fins and front splitter to help it make steady fast turns with out flipping.
@peterlowks631
@peterlowks631 4 жыл бұрын
I put a 540 sized brushless mortor in one of thoose and hit 51mph but it would lift the front end up every time and I ended up wrecking it
@evhexrc1765
@evhexrc1765 6 жыл бұрын
I’m planning on installing a brushless system with a 540/550 size motor and run up to 4s lipo in the short course version of your buggy. It’s gonna be FaSt!
@HoloScope
@HoloScope 4 жыл бұрын
@Foto4Max lol
@HoloScope
@HoloScope 4 жыл бұрын
I would love to drive one of those down my street, haha my little brother would love it
@lordcabbage5240
@lordcabbage5240 4 жыл бұрын
Holo Scope love ur profile pic, are you a fan of mha?
@HoloScope
@HoloScope 4 жыл бұрын
@@lordcabbage5240 ofc
@Tfbruh
@Tfbruh 6 жыл бұрын
Really good video awsome emotionless voice lol but try upgrading the A959-b
@robertowens7771
@robertowens7771 8 ай бұрын
If it's not fast enough make it fast, I dropped a modified 8 turn brushed 540 motor in mine it hauls azz, I also have a fan cooled 630 amp Esc and motor cooling fan,i also upgraded my transmitter and receiver,and the turnbulkes, it drives in a strait line very well
@Bakwod
@Bakwod 7 жыл бұрын
just letting you know....those rims are not going to take to much of a beating....try to get it on its tires... its cheaper...Nice build man...
@TheDIYGuy999
@TheDIYGuy999 7 жыл бұрын
Thanks for the praise. Believe me, the rims already took A LOT of beating!
@robertowens7771
@robertowens7771 11 ай бұрын
I skipped the brushless motor and went with a modified 540 8 turn motor and a 480 amp fan cooled esc It makes my tires turn into pizza cutters I had to cut the body a little it's fast as lightning ⚡⚡⚡⚡⚡⚡ also got a cooling fan on the 8 turn too
@zomasur13
@zomasur13 6 жыл бұрын
This guy created a fuckin beast
@TheDIYGuy999
@TheDIYGuy999 6 жыл бұрын
Yes, it's crazy fast for its size
@manrocket9414
@manrocket9414 6 жыл бұрын
Awesome upgrade/video sir...i have a959b...i was wondering what different model motor i can use,so i dnt have to change the bore..keep up great content...thx for ur help
@JayDauglash
@JayDauglash 5 жыл бұрын
Nice video! What other wheels can fit on there?
@mailmanx69
@mailmanx69 6 жыл бұрын
That thing is a rocket ship! Great work!
@TheDIYGuy999
@TheDIYGuy999 6 жыл бұрын
Yes, it‘s faaaaaaaast
@BenPortmanlewes
@BenPortmanlewes 6 жыл бұрын
I've done exactly the same mod....Like racerstar stuff, have many quads with racerstar parts
@pravinsharmasharma9983
@pravinsharmasharma9983 4 жыл бұрын
Bro does it have break function?
@RS-nl2lp
@RS-nl2lp 6 жыл бұрын
You can fix the toe angle of the fromt wheels by bending the plastic hub of each wheel where the rod connects to the steering machanism. I used a lighter to heat the plastic. Works perfectly, takes 1 minute and the hubs does not get brittle after heating.
@mattschneider8361
@mattschneider8361 29 күн бұрын
What gearing are you using. I've tried the conversion with a 17t pinion but all I get is cogging and no drive.
@royalweapon4706
@royalweapon4706 6 жыл бұрын
hello, I would be interested in realizing the project of the brushless machine driven by arduino, modifying my rc car vortex 4wd brushed machine, can you send me the link of the remote used in the video in order to buy it? and is it possible to use the same remote control already present in the machine and the same servomotor? Is the new remote control expensive? Thanks in advance for your attention, I look forward to you. I would like to make this project for my June graduation exam. Samuele
@TheDIYGuy999
@TheDIYGuy999 6 жыл бұрын
You can't buy it, but the GitHub link, where you can download the Eagle board PCB files and the software is in the video description. The PCB can be ordered on www.oshpark.com
@JeepITguy
@JeepITguy Жыл бұрын
Explain to me how an OS receiver does anything at all to address stripped gears?
@timothybrostrom4541
@timothybrostrom4541 6 жыл бұрын
Thanks for the very nice video! I just got my a979 and I'm already thinking about upgrading to a brushless system. I'm very new to the hobby so I'm sorry for the newbie level of my questions :) Should I use a 245 brushless motor with 4500 kv or the one with 4800 kv? Also what battery should I use with this brushless system. Thank you for your time :)
@TheDIYGuy999
@TheDIYGuy999 6 жыл бұрын
You're welcome. I'm using a 4800KV motor. All the required material is listed in the video description ;-)
@UrbanoTVofficial
@UrbanoTVofficial 6 жыл бұрын
I have one of these. I modded it to work with a 6s lipo lol. It goes 100mph+
@TheDIYGuy999
@TheDIYGuy999 6 жыл бұрын
6s and 100mph+ sounds realistic ;-)
@UrbanoTVofficial
@UrbanoTVofficial 6 жыл бұрын
Considering the car is literally smaller than the transmitter lool
@UrbanoTVofficial
@UrbanoTVofficial 6 жыл бұрын
Lmfao why would anyone lie about shit like this? Why not try it yourself and see what Im saying lol
@That1E_K1129
@That1E_K1129 6 жыл бұрын
UrbanoTV video or it didn't happen. Cuz I kinda smell b.S.
@UrbanoTVofficial
@UrbanoTVofficial 6 жыл бұрын
Fine, ill take a picture of the setup later and record a video as soon as I get my gyro for it
@themaninthemirror3447
@themaninthemirror3447 6 жыл бұрын
could you try making a wltoys a979b with a leopard 4370kv and 60a and use a 2s.and then put the dromida monster truck tires on it. It could be a good video and I would love to see that. Pls do it if possible
@TheDIYGuy999
@TheDIYGuy999 6 жыл бұрын
I will probably do an A979-B upgrade video. I already have some parts lying around. But it will take some time
@everythingisvibration
@everythingisvibration 6 жыл бұрын
Great Video, Love mine, put a better brushed motor & pinion & made it blazing fast.
@TheDIYGuy999
@TheDIYGuy999 6 жыл бұрын
Thanks. Yest, this thing is a blast
@skytalon74
@skytalon74 6 жыл бұрын
Great and easy upgrade. I also used the 2435 4800kv w/ 25amp esc.
@TheDIYGuy999
@TheDIYGuy999 6 жыл бұрын
Thanks
@smitheshn6637
@smitheshn6637 6 жыл бұрын
When using this ESC and motor with NiMH battery what will be the Low Voltage Cut Off should be? And what is neutral range ?
@TheDIYGuy999
@TheDIYGuy999 6 жыл бұрын
They are not really critical, so no cutoff is required. Neutral range is the range where you can move the throttle and nothing happens. Leave it at the default.
@smitheshn6637
@smitheshn6637 6 жыл бұрын
TheDIYGuy999 Thanks a lot 👍
@roadstar499
@roadstar499 3 жыл бұрын
i really like this setup did motor and esc stay cool? also what battery you use ??? 2s 1500 40c ??? thanks
@rcsendandblast1579
@rcsendandblast1579 5 жыл бұрын
He k yeah the wobbly pinion gear will make a big difference on longevity. Why bother then. Not just fixing it in the first place why man.
@seanocansey2956
@seanocansey2956 5 жыл бұрын
Does the car come with front wings? Because that could help keep it on the ground
@toddolatheks.1328
@toddolatheks.1328 5 жыл бұрын
Great video....... Thanks 🙏
@TheDIYGuy999
@TheDIYGuy999 5 жыл бұрын
You‘re welcome
@TheACCmy
@TheACCmy 3 жыл бұрын
Great video and thanks to the detailed explanation. So how to fix the too slim motor stick problem? you didn't provide a link
@TheDIYGuy999
@TheDIYGuy999 3 жыл бұрын
I don't understand your question
@TheACCmy
@TheACCmy 3 жыл бұрын
@@TheDIYGuy999 I can't fit the brushless motor in the original mount. And also the shaft of the brushless motor is too thin for the pinion
@TheDIYGuy999
@TheDIYGuy999 3 жыл бұрын
@@TheACCmy Then it is the wrong motor
@cengizkadric9282
@cengizkadric9282 4 жыл бұрын
shocks are bit bouncy but awesome work on it 👍
@TheDIYGuy999
@TheDIYGuy999 4 жыл бұрын
Thanks
@nnanyereugoogu2514
@nnanyereugoogu2514 5 жыл бұрын
You are a genius
@TheDIYGuy999
@TheDIYGuy999 5 жыл бұрын
Thanks
@ludovi1233
@ludovi1233 2 жыл бұрын
Is brushless produce more speed? Thanks
@moonmanmigz
@moonmanmigz 6 жыл бұрын
So sick.. this car is amazing
@TheDIYGuy999
@TheDIYGuy999 6 жыл бұрын
Yes, it is
@moonmanmigz
@moonmanmigz 6 жыл бұрын
TheDIYGuy999 I really think I am going to be this. Sick video
@kanishkakasturi2798
@kanishkakasturi2798 3 жыл бұрын
How to find mortor guard
@hafizulizham8692
@hafizulizham8692 5 жыл бұрын
Hello sir...can standard vortex each and moto use Moto fan?I mean install it to standard each...
@riozflyti
@riozflyti 2 жыл бұрын
This supports 3s
@seanocansey2956
@seanocansey2956 5 жыл бұрын
May be a stupid question, but how is this a 4-wheel drive? Must be some interesting gearing?
@rcbustanut2057
@rcbustanut2057 5 жыл бұрын
There's a front & rear differential. A center drive shaft connects them both together. The reduction gear is on this center driveshaft which connects to the pinion on the motor.
@areldcookie5581
@areldcookie5581 6 жыл бұрын
Nice video man , can you oil fill the metal shock ?
@TheDIYGuy999
@TheDIYGuy999 6 жыл бұрын
Thanks. Yes, you can. The upgraded shock have O-Ring seals
@aux_juul8584
@aux_juul8584 2 жыл бұрын
What did u do about the pinion
@rohithalakshman3810
@rohithalakshman3810 3 жыл бұрын
How to cover in motor
@troyporter3825
@troyporter3825 4 жыл бұрын
Hi great video!..Can you say what you mean by 'deadzone'....and what is the benefit of changing the ESC?
@TheDIYGuy999
@TheDIYGuy999 4 жыл бұрын
Thanks. Deadzone means the area around neutral, where you turn your steering wheel and nothing happens on your steering. You don't want that. Changing the ESC and the motor makes the vehicle a lot faster.
@troyporter3825
@troyporter3825 4 жыл бұрын
@@TheDIYGuy999 oooh ! Thanks for quick response!!!
@AnDrew-lo1mh
@AnDrew-lo1mh 6 жыл бұрын
I was planning to upgrade brushless motor.. do i need new radio control on it? Tnx
@TheDIYGuy999
@TheDIYGuy999 6 жыл бұрын
Yes. The original receiver includes the ESC and the servo is a 5 pin type.
@hammerT2997
@hammerT2997 5 жыл бұрын
Where do you get another remote?? I'm planning on going brushless soon
@POLITICALYCORRECTify
@POLITICALYCORRECTify 3 жыл бұрын
This might be a cheap project for me to learn how to mod cars
@lolsoos4205
@lolsoos4205 6 жыл бұрын
Hoffe mal du bist deutsch wirkt aber so also lohnt es sich das Teil zu kaufen will es mir vielleicht zulegen
@jasonherman4833
@jasonherman4833 4 жыл бұрын
Hey bud, sorry if I missed it... how much will you have in it total when done adding brushless? Thanks
@TheDIYGuy999
@TheDIYGuy999 4 жыл бұрын
You can find the prices in the banggood links below.
@camrowdrone6497
@camrowdrone6497 5 жыл бұрын
Really fast,I want to do this mod👍🏻
@TheDIYGuy999
@TheDIYGuy999 5 жыл бұрын
Thanks. Yes, its insanely fast for its size
@ceansilorcaso5820
@ceansilorcaso5820 4 жыл бұрын
How do you solve the problem of charging the batteries using the regular charger from a WLToys RC? when is charging the red lithe is on but after 10 or 15 minutes goes out. Why WLToys five us this charp battery chargers?
@TheDIYGuy999
@TheDIYGuy999 4 жыл бұрын
I never use the WLtoys charger
@mohammedbob6650
@mohammedbob6650 4 жыл бұрын
How much it cost in American dolar
@dcabusas
@dcabusas 4 жыл бұрын
How can I buy a receiver ? And can I use original sero
@TheDIYGuy999
@TheDIYGuy999 4 жыл бұрын
You can't, you have to assemble it by yourself. The servo needs to be replaced. Links see video description.
@Bathurst_1000
@Bathurst_1000 6 жыл бұрын
Hello, can you please send me a list of all the items I need to make my WLTOYS A979 as fast as yr one
@TheDIYGuy999
@TheDIYGuy999 6 жыл бұрын
You can find the list in the video description ;-)
@closed2459
@closed2459 4 жыл бұрын
Your tires blooming gives you less tire surface = less control an inless you have metal gears most likely them are now stripped . as cool as blooming looks hurts when blows up in your face .
@RS-nl2lp
@RS-nl2lp 6 жыл бұрын
Original shocks are fine, just fill with some 500 CPS silicone oil.
@TheDIYGuy999
@TheDIYGuy999 6 жыл бұрын
They don‘t have a rod sealing and the oil will spill out immediately
@xXDiver12Xx
@xXDiver12Xx 3 жыл бұрын
What's that tool you used at 9:47?
@Mason-Dain
@Mason-Dain 5 жыл бұрын
How did you fit 2.3 bore pinion to 2mm shaft
@TheDIYGuy999
@TheDIYGuy999 5 жыл бұрын
I made a bushing on the lathe
@gabrielbeck2007
@gabrielbeck2007 6 жыл бұрын
Brazil....top vídeo...
@TheDIYGuy999
@TheDIYGuy999 6 жыл бұрын
Thanks
@manueljr2974
@manueljr2974 3 жыл бұрын
Why do u replace the servos for
@TheDIYGuy999
@TheDIYGuy999 3 жыл бұрын
Because a standard receiver needs a 3 pin servo. The stock ones are 5 pin
@mpoerot8013
@mpoerot8013 4 жыл бұрын
that motor has 2mm shaft. what pinion did you use?
@TheDIYGuy999
@TheDIYGuy999 4 жыл бұрын
It's been a long time since then, but I think it's the stock pinion.
@ParRagon-
@ParRagon- 5 жыл бұрын
Bitte nutz nicht immer loctite. Wenn ein Teil Plastik is ( schraube oder Loch) dann geht's schneller kaputt wenn du beim nächsten mal die schraube rausdrehen möchtest.
@arnaldomoser3212
@arnaldomoser3212 6 жыл бұрын
What is the best motor for this? Brushless or 540 motor brushed?
@TheDIYGuy999
@TheDIYGuy999 6 жыл бұрын
The 540 motor is not bad, but its efficiency is not the best and your battery will be flat in no time. So better use:This 35A ESC: www.banggood.com/Racerstar-35A-ESC-Brushless-Waterproof-114-116-118-RC-Car-Part-p-1082604.html?rmmds=search&cur_warehouse=CN and this 2440 4600KV motor: www.banggood.com/Racerstar-2440-Motor-Brushless-Waterproof-Sensorless-608046004000KV-118-116-RC-Car-Part-p-1112737.html?rmmds=search&ID=514253&cur_warehouse=CN
@VroomvroomNY
@VroomvroomNY 4 жыл бұрын
I need a pinion with a 3.175 hole where can I find one?
@mysliphoto8400
@mysliphoto8400 4 жыл бұрын
Does it go 70kmh stock?
@pravinsharmasharma9983
@pravinsharmasharma9983 4 жыл бұрын
Can you add brake function for good car control?
@closed2459
@closed2459 4 жыл бұрын
You pump the throtal in back fast it breaks
@pravinsharmasharma9983
@pravinsharmasharma9983 4 жыл бұрын
@@closed2459 ok😊
@RAZEROFFICIAL2024
@RAZEROFFICIAL2024 6 жыл бұрын
Would this motor work in a tamiya tt01 ?
@TheDIYGuy999
@TheDIYGuy999 6 жыл бұрын
No, you need a3650 size: kzfaq.info/get/bejne/n8WkrJlyzcjRmWw.html
@jhdjsshshhsh4288
@jhdjsshshhsh4288 6 жыл бұрын
Switzerland ?
@TheDIYGuy999
@TheDIYGuy999 6 жыл бұрын
Yes
@severinschmid7714
@severinschmid7714 5 жыл бұрын
haha hani mer au denkt
@FXV56
@FXV56 6 жыл бұрын
The ESC is holded by glue?
@TheDIYGuy999
@TheDIYGuy999 6 жыл бұрын
No, double sided tape, as usual
@randomstuff-wg6nj
@randomstuff-wg6nj 6 жыл бұрын
16:05 what u doing i can see that the servo works at 13:44
@TheDIYGuy999
@TheDIYGuy999 6 жыл бұрын
I'm adjusting the servo end positions (in degrees). Yes, it work at 13:44, but the end positions were not yet adjusted properly.
@mickeymouse9823
@mickeymouse9823 4 жыл бұрын
Is this servo replacement a stronger servo ?
@TheDIYGuy999
@TheDIYGuy999 4 жыл бұрын
It is a bit stronger than the original one. The main reason to replace it was, that the original one is 5 pin, but the electronics swap required a 3 pin one. Material links are in the video description.
@mickeymouse9823
@mickeymouse9823 4 жыл бұрын
TheDIYGuy999 thanks dude currently modding my 979b and have been looking into a brushless motor and esc replacement , I’m aware you need a digital servo to be compatible with multi channel radio but I’d like to get the steering angle slightly larger using a stronger servo with a larger steering radius, I’ve noticed that there are extension adaptors for the hubs to give the rc car a wider wheel base giving me more room for the larger steering angle , hopefully this will also fix the problem of it being unpredictably controllable at high speeds and give it overall better handling.
@bricewires6876
@bricewires6876 4 жыл бұрын
Is this faster than the a959b?
@TheDIYGuy999
@TheDIYGuy999 4 жыл бұрын
I never measured, but I think it's a bit faster
@loriwithers1909
@loriwithers1909 6 жыл бұрын
does the esc have low voltage alarm? & top speed??
@TheDIYGuy999
@TheDIYGuy999 6 жыл бұрын
Yes, it has. I’m guessing, that the top speed is about 70km/h.
@djgzone1811
@djgzone1811 3 жыл бұрын
Are you in the UK 🇬🇧
@TheDIYGuy999
@TheDIYGuy999 3 жыл бұрын
Switzerland
@AustinPetDetective
@AustinPetDetective 6 жыл бұрын
Why only a 25A ESC with this combo ?.
@TheDIYGuy999
@TheDIYGuy999 6 жыл бұрын
25A is enough for this size of car. But you're right, maybe iI will upgrade to a 35a with 2440 motor...
@beast_slayer-bf9yg
@beast_slayer-bf9yg 6 жыл бұрын
Can it do 3s
@mckieaniki9125
@mckieaniki9125 5 жыл бұрын
What controller and receiver did you used?
@TheDIYGuy999
@TheDIYGuy999 5 жыл бұрын
It is my own, Arduino based DIY system. You can find the GitHub link in the video description. Of course you can also use any other standard 2.4GHz system
@mckieaniki9125
@mckieaniki9125 5 жыл бұрын
@@TheDIYGuy999 Sir can you make a video how to upgrade wltoys a959-b?
@shilpam8105
@shilpam8105 5 жыл бұрын
does it have speed control?
@TheDIYGuy999
@TheDIYGuy999 5 жыл бұрын
Yes, of course. Throttle and steering are proportional.
@meatman9570
@meatman9570 6 жыл бұрын
much light
@AlexRides808
@AlexRides808 7 жыл бұрын
wheel bearings?
@TheDIYGuy999
@TheDIYGuy999 7 жыл бұрын
They are still in original condition. Sinter bronze bushings, no ball bearings. But they could easily be replaced with ball bearings.
@ltygol3221
@ltygol3221 4 жыл бұрын
I wanted to buy this car but then i got an expensive nitro buggy And i spared up for a nitro buggy sooooo long and then the day after i went to an rc store and i saw this 1 and noticed how small it was so for the people that want to buy it be aware rhat its not bigger than your hand
@jimmitchell8357
@jimmitchell8357 4 жыл бұрын
Yes it is a 1/18 scale RC ...
@huge3000
@huge3000 6 жыл бұрын
so where is the pinion mod video?
@TheDIYGuy999
@TheDIYGuy999 6 жыл бұрын
No pinion mod is required with this brushless motor
@sjn.mohamadadam9035
@sjn.mohamadadam9035 3 жыл бұрын
Hi..im wltoys rc car player 144001..from malaysia
@WhenTheyGoLowWeGoHigh
@WhenTheyGoLowWeGoHigh 6 жыл бұрын
nice video max speed?
@TheDIYGuy999
@TheDIYGuy999 6 жыл бұрын
Thanks. I have not measured the speed, but I assume 60+ km/h
@WhenTheyGoLowWeGoHigh
@WhenTheyGoLowWeGoHigh 6 жыл бұрын
TheDIYGuy999 Thank you
@mikedisher30
@mikedisher30 6 жыл бұрын
That’s insane lol
@TheDIYGuy999
@TheDIYGuy999 6 жыл бұрын
Yes, it is. Thanks.
@couchgaming5577
@couchgaming5577 6 жыл бұрын
Does anyone know if the a595b uses the same battery as the a959?
@TheDIYGuy999
@TheDIYGuy999 6 жыл бұрын
Yes, it has a Deans instead of a JST connector
@couchgaming5577
@couchgaming5577 6 жыл бұрын
TheDIYGuy999 so they're interchangeable? Awesome
@TheDIYGuy999
@TheDIYGuy999 6 жыл бұрын
No, as I said, they have a different plug
@couchgaming5577
@couchgaming5577 6 жыл бұрын
TheDIYGuy999 oh sorry, misunderstood you. Thanks! I think I'm going to get the b version
@lanyburnett7966
@lanyburnett7966 4 жыл бұрын
I want to like these cars. But, it takes nearly 2 months for this stuff to arrive from China. That is unreasonable and makes driving these things difficult.
@1peanut
@1peanut 4 жыл бұрын
Ebay USA stock. www.ebay.com/itm/NEW-WLtoys-A959-B-2-4G-1-18-1-18-4WD-70KM-H-Electric-RTR-Off-Road-Buggy-RC-Car/372687738968?hash=item56c5eb9858:g:4pYAAOSwzahc~ya0
@michaelluciano7774
@michaelluciano7774 4 жыл бұрын
That much power on a short wheel base is pointless, you can't control the darn thing.
@TheDIYGuy999
@TheDIYGuy999 4 жыл бұрын
Yes, the controllability is not the best. That's why I deigned an automatic stability control: kzfaq.info/get/bejne/jdt3pb2dvrmnlIU.html kzfaq.info/get/bejne/qZibipqns52veWw.html
@bearcom6958
@bearcom6958 5 жыл бұрын
you should make it all metal
@TheDIYGuy999
@TheDIYGuy999 5 жыл бұрын
Why? it just adds more weight and it can't flex during a crash
@TonysRcTechboom
@TonysRcTechboom 6 жыл бұрын
Great upgrade vid mate. I have one off these trucks I'll have to do a vid of my upgrades. Please look at my channel am only new at this. 😊👊👍👊👍
@TheDIYGuy999
@TheDIYGuy999 6 жыл бұрын
Thanks for the praise
@TonysRcTechboom
@TonysRcTechboom 6 жыл бұрын
Your welcome mate 😊👊👍
@SweetRainerrr
@SweetRainerrr 6 жыл бұрын
whaeir did you that moter
@TheDIYGuy999
@TheDIYGuy999 6 жыл бұрын
Isaac Vergara the parts links are in the description
@edetam22000
@edetam22000 6 жыл бұрын
hello TheDIYGuy999 it's 6 months that I tried to remake your tx and rx but I can not get my question is can you do me a tx and rx and send it to me in France your price is mine
@TheDIYGuy999
@TheDIYGuy999 6 жыл бұрын
Hi, sorry, but I just don‘t have the time to sell them. What exactly was your problem? Did you use my PCB design? Or was it a software problem?
@mymailmo69
@mymailmo69 6 жыл бұрын
Whatever!!
@RcOffroad9513
@RcOffroad9513 6 жыл бұрын
Good video bro! I have the same car, I have been building on my channel, check it out!
@TheDIYGuy999
@TheDIYGuy999 6 жыл бұрын
Thanks. Your brushless A959 also looks pretty fast
WLToys A979 A959 Upgraded Brushless on 3s 4000kv motor fun
6:10
MicroModDude
Рет қаралды 10 М.
Wltoys A979 Brushless Upgrade
16:10
A - Z tube
Рет қаралды 93 М.
I Took a LUNCHBAR OFF A Poster 🤯 #shorts
00:17
Wian
Рет қаралды 6 МЛН
Zombie Boy Saved My Life 💚
00:29
Alan Chikin Chow
Рет қаралды 28 МЛН
Magic? 😨
00:14
Andrey Grechka
Рет қаралды 20 МЛН
娜美这是在浪费食物 #路飞#海贼王
00:20
路飞与唐舞桐
Рет қаралды 3,9 МЛН
Wltoys A959 Brushless motor Esc Servo upgrade
18:31
N K
Рет қаралды 146 М.
Upgrade Rc Car Wltoys A959B 100km/h
10:50
YST-DIY YÊU SÁNG TẠO
Рет қаралды 1 МЛН
Upgrade 4000kv brushless motor for WLToys A959B
10:55
Phong Độ
Рет қаралды 119 М.
Cheap RC Car 70+ MPH With No Upgrades.
8:33
Tomley RC
Рет қаралды 177 М.
Nâng cấp WLtoys A959 1/18 lên Brushless Motor - Siêu Trâu
16:45
Kênh Sáng Tạo .COM
Рет қаралды 734 М.
Cheap And Easy A959 Buggy Pinion And Spur Gear Dirt Protection!
2:32
WLToys A959, $10 Brushless Motor Upgrade
11:15
VAN CITY RC
Рет қаралды 8 М.
I Took a LUNCHBAR OFF A Poster 🤯 #shorts
00:17
Wian
Рет қаралды 6 МЛН