Just so you know… you are one of the clearest, descriptive plumbers on KZfaq! Well done!

Hey man I’ve been watching your videos for a year or so now and just wanted to say thank you! You seam like a genuinely kind person and something we could always use more of.

Wish you would have explained more about the air admittance valves. What you can and cannot use them on, how far up they need to be…etc. I love your videos, this is the only thing I have more questions on.

I’m currently building a house, I’ve paid for it to be dried in. Fixing to tackle the inside myself. I’ve learn a ton watching your videos. Thank you

Nice work josh 👍 farm sinks are always confusing to me, 😆 glad I’m not the only one that has to custom cut things to fit. This will look awesome 🤩

Thanks for the video. I actually have the same sink to install based on countertop installation today, so this was right on time.

Bought a house and have watched and saved a number of your videos. Thanks for all the info!

Getting ready to install a similar sink so this was perfect timing. Thank you! Nicely done.

Great video, I'm about to tackle this myself!!!

I am not sure the deck screws described at 3:46 for the frame are sufficient for the load. Also not sure what type of screws you used to attach the frame to the cabinet at 5:18. Both appear to be subject to shear. A 30” wide farm style sink full of water could have a load approaching 400 lbs depending on the dimensions. Assuming the load is distributed evenly across 2 x 4 screws, approximately 50 lbs shear at each screw along the sides. One could transfer the load to the cabinet base by suitable supports between the bottom of the frame and the cabinet base. The instructions for the sink I am installing includes a caution to make sure the cabinet can support the sink with dishes and filled with water. FYI.

So clear and detailed explanation! 👌

Monday, October 24. 2022. 210k subs. Can't wait to see where you will be a year from now. BRAVO

Will you be showing the remaining installation? Please do. Long time subscriber here and you’ve helped me tons. Thanks.

Thank you very much!

Excellent,, thanks

i enjoy your videos keep up the good work .

How were you able to avoid hitting the AAV with such a deep sink?

I wonder if that faucet will clear the aav 🤔 never seen someone use Teflon installing one. You are very interesting sir

I always liked undermount sinks except when I could tell a client was really harsh on using it, not protecting it from knives scratching it or just not being careful. I've had to buff and sand scratches out very delicately on some stainless steel sinks making sure to work the same direction of the grain look. Of course, a cheaper sink, it doesn't work well. Porcelain was not a good one for that since they are not forgiving for chips even though it could get repaired, if a professional does it. The 16 gauge sink is a great quality instead of the 20-22 gauge and always having to add sound buffing material to dampen the sound. 16 is always the best way to go. Any single drain sink is required to have the cheater vent (air admittance valve) always check with codes since I have had a few not allow it. This never made sense to me because the drain flow is so much slower without it. The rough in plumbing always made it easier how it was done in your video but in a remodel situation, you could create the same thing exposed in the cabinet. Also making sure the air admittance valve is higher than the bottom of the sink. The one thing you mentioned about how long they last, I had a remodel job that had a water leak in the wall. It was an odd place because the supply lines came up from the base of the cabinet, this was somewhere in the wall. Surprisingly, someone put the valve in the wall before doing the drywall and the valve quit working and created water issues. Cutting out the back of the cabinet to find this was fun and then put a new back in the cabinet after fixing the issue. Always make them accessible to work on. Great job with everything and using a wood frame for the best support and a great quality sink with all the accessories. 🔨🔨 🔨 The like button for sure 👍🏻

There is say the cabinet needs to be 3 inches on each side of the sink. I do not understand why if enough support is installed.

did he really use 2-1/2" screws and drive them through the end panel into the dishwasher opening?

Where did you find that jigsaw? Awesome video

Question I’m replacing my sink with a deep sink and there is an existing air vent but it’s too tall for the sink. Can that pipe be moved or shortened-cannot move forward because I do not want to create a disaster-help!

Do they make over the countertop farmhouse sinks?

They sale farmhouse sinks that are 35 1/4” and can use a 36” sink base. Yw

Great videos... just joined and wonder about the sink... undermount?? won't you need to silicone the top again to keep it waterproof? Also, if the width of my sink doesn't exactly line up with the 2 x 4s on each side would I just build it thicker or just add blocking? again, thanks for making these ... very helpful..

Dude were you homeschooled? Your videos are amazing. Thē best.

I'd rather use 2 pieces of 3/4 plywood sandwiched strips instead of 2x4. That 2x4 just seems out of place. I know it's not visible, still.. The devil is in the details, and that extra what makes a difference between ordinary and extraordinary.

thats a big tool belt to hold up a box cutter and a tape... 🤠

If the air admittance valve is only good for about 10 years didn't you just install it directly behind the bowl of that sink? That will be fun to twist out later.

First.

👍💞

Jddjdjjdjdjdjdjsjsjdjdjsjsjsjssjjdjsjssjjssjissiissisijdjdjdjdidjdjsjdjdjdjddiidjsjsisjdjdjdisdijdjdjsissjjsjsisisisisdiudsiidudjdidjdhdjdjdid