Patching Rotted Water Damaged Wood

Рет қаралды 612,823

2 жыл бұрын

In this video I cut out some rotted wood on my porch railings and patch it in with new pressure treated wood and finish it off with some Bondo, primer and paint.
Painting the bulkhead - • Painting My Basement B...
• Subscribe on KZfaq: bit.ly/SubscribeToTheFixer
• Facebook: / thefixeronyoutube
• Instagram: / thefixeryoutube
• Website: www.thefixerhomerepair.com
• Patreon: / thefixer
• Amazon store: www.amazon.com/shop/thefixer
*As an amazon affiliate I earn commission on qualifying purchases
They make Bondo for wood now! I had no idea! - amzn.to/2Zhzuej (affiliate link)
Want to support my channel for free?
If you click this link amzn.to/30WP8MX and buy anything from Amazon, I will get a small commission. This will help support my channel at no extra cost to you! Thank you for your support!
I use a program called TubeBuddy to optimize my videos in order to make it easier for people to find my content on KZfaq. Are you a content creator and would like to try it?
Sign up here - www.tubebuddy.com/TheFixer
I use Adobe creative cloud to create all my videos.
bit.ly/AdobeTheFixer
My KZfaq gear:
DJI Osmo Action Camera - amzn.to/2Xbp9OB
iPhone 11 Pro - amzn.to/2TYpZhc
Camera tripod - amzn.to/2DwMzC7
Lighting Kit - amzn.to/2XGHuTq
DISCLAIMER:
This video and description contains affiliate links, which means that if you click on one of the product links and make a purchase, I will receive a small commission at no extra cost to you. This helps support this channel and allows me to continue to make videos like this. Thank you for your support!
Videos produced by The Fixer are provided for informational purposes only. All material provided within this video is for informational, educational, & entertainment purposes only. Some of these projects, materials, and techniques may not be appropriate for all ages or skill levels. Please use all safety precautions while following any instructions or concepts provided by this video. Viewers must be aware that by doing projects on their homes they are doing it at their own risk and The Fixer cannot be held liable if they cause any damage to their homes. It is the sole responsibility of the viewer to educate themselves on their local codes and regulations before undertaking any sort of project. Always have safety in mind and have fun!

Пікірлер: 676

@belleange590 2 жыл бұрын

Absolutely perfect timing. I need to repair water damaged wood at the bottom of my garage side door. I don't have any 'big boy' machines but I will get it done. I do have that hand saw your using and the drill and sander. I LOVE YOUR CHANNEL. Bear in mind. I am a woman age 76. I can not afford to pay someone to do repairs for me but YOU show me how. Thank you and your handyman skills look awesome.

@georgedavall9449 2 жыл бұрын

Nice comment Belle. You can do it! 👍✌🏻🙏

@LucyRockprincess 2 жыл бұрын

You can do it Belle! :)

@truus5653 Жыл бұрын

you can do it!!!!😘

@rockgarrison1784 Жыл бұрын

😊😊😊

@Isabel-of4wq Жыл бұрын

Belle if you can do it I can do it, I have exact same problem! I’m ten years younger than you so you’ve inspired me to keep going and do it myself (thanks to The Fixer I’ve just discovered hydraulic cement which I’d never even heard of before!

@retireearly7223 Жыл бұрын

Excellent repair. One suggestion - whenever bonding new concrete to old concrete, wet the old concrete first. It helps the new repair fuse to the old concrete.

@jeffbguarino Жыл бұрын

I have been told that you are not supposed to wet the concrete because the extra water will weaken the new concrete since it will dilute it at the contact face. So it might do the opposite. I have been told the same thing with tiles in the house , not to wet the tiles before putting them in the mortar. The thin layer of water weakens the mortar that contacts it. This is at the very place where they bond, so in the future , a tile can just pop off the floor .

@DT__1 Жыл бұрын

Oh my goood where u getting all that nonsense. New or not old all surfaces is ok for bonding . OLD CONCRETE RENDER BRIKS plasterboards any OLD STUF WILL SUCK WATER OUT OF UR NEW MIX way TO FAST AND THERE WILL BE NO BOND . New surface will harden and separate. U must damp old surfaces and check how fast it dries then u know do u need to damp it or sometimes properly soak it untill it will stop drying fast. Then ur new mix will bond properly.this always the case . As well first RUB NEW MIX TO OLD SURFACE SO IT FILLS ALL IMPERFECTIONS. It will stay there forever.

@jeffbguarino Жыл бұрын

@@DT__1 I did a little research and it all depends on what you are doing. If you use thin set mortar then you are not supposed to wet the tile or concrete surface but if you are just using plain cement you should wet the surface so that there are no air cavities. If you don't wet the surface then the water from the cement will separate and go into the dry concrete or tile and cause a weak bond because there is not enough water in the thin layer of cement next to the bond for it to cure properly. Also you have to be careful when you wet the surface that there is not water sitting on the surface because this will do what I said and weaken the cement bond. In a nutshell, you need the proper amount of water in the layer right next to the bonding surface. You have to dampen the tile or other surface and wipe off the excess water. You just need enough water to get the air out of the surface. Many of the new tiles aren't porous so you have to determine what you are working with first.

@redwar7253 Жыл бұрын

@@jeffbguarino Yep it depends of what material your are using, some needs some water others don't

@zezu4775 Жыл бұрын

@@jeffbguarino.. For the Tiles it’s true.. Not wet the back of the tile for sure..

@joethomas5983 Жыл бұрын

When I work on problem areas (water damage) I usually paint the ends of the wood so it doesn't tend to wick the water in the future. You can also use exterior wood glue for this.

@ronnyhakonsen1313 Жыл бұрын

seal all ends, problem areas or not. Also the piece in the video is probably rotten because it is to close to the concrete. He should have kept it at least 1"-1.5" above the concrete so it dosent collect moist from below

@nodnodwinkwinkV 3 ай бұрын

Yes, highly recommend this as well. It should have gotten a few coats to protect it. It's pushing on top of concrete now and water will get caught behind that silicone he put on the three sides. I would have gone a step further and put a layer of plastic or rubber underneath the bottom of that wood. The amount of filler going into that damp looking rot on the wall siding is just hiding a problem as well. I wonder what it looks like today after two years of weather.

@badad0166 Жыл бұрын

13:50 Car guy here: Knead hardener tube before opening to re-mix contents (like ketchup, it separates in storage). A corner to corner bead of hardener across the pile of bondo is thought to be a good ratio. Cheers!

@donnabyrd8929 Жыл бұрын

Should have primed and painted top and bottom of filler pieces to keep moisture out

@TexianPa 2 жыл бұрын

Came out great. I always try to make my temporary repairs look just as clean and professional as my permanent repairs, because you never know how long “temporary” may be.

@TheFixerHomeRepair 2 жыл бұрын

Very true!

@petercolquhoun2086 2 жыл бұрын

"It's only temporary unless it works."

@deaconblooze1 2 жыл бұрын

A wise man once said, "there is nothing so permanent as a temporary fix."

@neepsmcfly4176 Жыл бұрын

@@deaconblooze1that was my dad! And my mom would possibly contest the "wise" descriptor, lol. I did, however, work w a fire Capt who insisted we were pros due to the # of repeated attempts until we got it right.

@majahanson311 Жыл бұрын

My favorite part starts at 19:21 where you're toe screwing the old to the new, and starting with an offset. It's so satisfying when it comes in for a perfect landing with everything lined up

@jimmyrogers4177 2 жыл бұрын

I would have cut the vertical wood short of the concrete. It is not holding any weight on the bottom and it is always a bad plan to attach wood directly it contact with concrete. At least that is what I have always been taught.

@vanstromi7810 9 ай бұрын

You can always come in with a multi tool and cut the bottom at the end but then you lose your protective coating. I agree. Cut it right the first time.

@williamprezioso2742 2 ай бұрын

You are right

@britishbulldog8966 Жыл бұрын

As a journeyman carpenter I have always tried to isolate wood from concrete. As many others have commented end grain and concrete are just not a great mix, unless you are trying to make compost. When a wood framed house is built on a concrete or block foundation, the wooden base plates are isolated from the concrete for this very reason. Concrete+Wood=Rot, even if there is very little moisture and it feels dry. This goes for fence posts as well.

@Magdalena-vy5li Жыл бұрын

That is not a temporary job, that is beautifully done. Just amazing work. Thank you for sharing.

@barrysrandomness Жыл бұрын

I watched this not because I have a similar issue, but because it was in my suggested videos and I knew it would teach me many things that I've not yet tackled in my DIY adventures. I wasn't mistaken! This was an excellent resource in so many ways. I'm off to buy a demolition saw and Bondo tomorrow.

@Butchsiek Жыл бұрын

Never use bondo as in the video. You will be sorry in the future if you need to repair the section and have to remove it.

@neepsmcfly4176 Жыл бұрын

@@Butchsiekwhy? If it's being removed, it's coming out as 1 complete board, right? Details!

@Butchsiek Жыл бұрын

@@neepsmcfly4176 covering up nails and screws with bondo, hides where they are. So I guess using a metal detector to locate them would be the way to go. instead of prying the board off the wall, ruining the shingles. Unless the shingles are being replaced also. Then it's all good to go..

@neepsmcfly4176 Жыл бұрын

@@Butchsiek ah! Ok, to be clear, esp since I've never worked on wall shingles before, but you're not so much disagreeable to Bondo so much as you don't want to hide your hardware, then? Yeah, don't know how delicate they are but if delicate exploratory prying is too destructive, I like your metal detecting idea. Or, if all your other nails are exposed, you can just lightly swing a hammer until you find the Bondo and, thus, your hidden hardware, no?

@Butchsiek Жыл бұрын

@@neepsmcfly4176 nothing like beating on wood you might keep to find bondo covered fasteners.. Using a metal detector means you gave to. Uy one that's good, MORE Mo sy spent to find what should have been covered up. And just because you got a hit with a metal detector doesnt mean it's in the 2x4, it could be under the 2x4. Which means?

@JLittleBass Жыл бұрын

Great video! But you missed a step :) You should have put some kind of water sealant on the cut surfaces of the PT 2x4 (and then let it dry for 24 hrs) before installing it. Pressure treatment is only surface-level, it doesn't penetrate all the way through the wood, so that nicely angled surface of the wood that's in contact with the waterproof cement is just as vulnerable to rotting again as the wood that was there when you started. So, unfortunately, you're going to have to do this again in a few years! Also, whenever you plan on working with wood filler, you want to have a can of denatured alcohol on hand (which you can find in the paint aisle). It's helpful in application because if you get some onto your putty knife and then smear the wood filler you've applied, before it dries, it will make the surface runny, which is good because it will give you a much smoother surface when it dries, which will save you a lot of sanding work and also make it smoother than you probably ever could with sanding. Also, you can use the denatured alcohol to clean your putty knife and your gloves and whatever else you might accidentally get wood filler on.

@Stringbean421 Жыл бұрын

You seem to forget, he was only doing this as a temporary repair to get him through the Winter months.

@reeb9016 Жыл бұрын

@Stringbean421 It seems you don't understand, this guy was just giving nice advice.

@alanpules4105 2 ай бұрын

Good advice. He said he was gonna redo the whole porch eventually though, so I don't think he's worried. 😎👌

@BrentAyotte 2 жыл бұрын

Definitely love the white against the house and how bondo worked so well. One of the best parts about your channel is how you patch now to prevent something getting worse and have a plan to replace later. Most DIY home owners with little to no experience (like me) need this content to help with repair ideas to prevent a big problem later. Can’t thank you enough and I’m so happy I came across your channel.

@RM-hy5kz Жыл бұрын

Nice🙏🏾

@jimkoko Жыл бұрын

While your Bondo is green (firm but not hard) use a Sure-form tool to shape and remove the majority of the Bondo

@mst5632 Жыл бұрын

End grain, end grain, end grain. The end grain of wood is a bundle of “straws” (tubules) that literally wick water UP the grain of wood via capillary action. So, your wood rotted from water on the porch being chronically wicked up the vertical board until the last few inches were so constantly soaked that the end grain of the horizontal board began wicking out of the vertical board. The boards did not rot from snow sitting on top of them as your entire horizontal board would have been equally rotted. Always seal end grain that will be in direct contact with another surface. Using PT lumber will buy you a few years but will eventually rot as well had you not put gutters on your house. Seal end grains (even PT lumber) & put gutters on your house, or get used to repairing rot routinely. Nice repair job. Thank you for taking the time to share & teach others. Stay blessed.

@pawkie2 Жыл бұрын

Paint the endgrain cos thats where rot starts. Looks awesome.

@chillones9574 2 жыл бұрын

Your channel is fire. I have learned so much as a first time home buyer, My house was built 1935 I was a little worried about repairs but came accross this channel some how, god is good, thanks.

@jsaysyay 2 жыл бұрын

i enjoy the way the white makes the railing feel more 'part' of the house, always nice stuff you do even when you call it patching

@GreenDragonPainting 2 жыл бұрын

You may already have one but. A painters "pull scraper" with the carbide blade, works amazingly well shaving bondo. If you shave it just before it gets hard you will save time on your sanding. I own a small painting business and have become somewhat of a bondo expert 😂 I have noticed bondo is really to hard for exterior wood repairs. The wood moves but the bondo doesn't. I explain it to customers as a band aid. That's basically what it is.

@rossl2544 2 жыл бұрын

using bodyfiller/bondo for that job is a bad idea as its not waterproof, it will soak up any water or moisture and make the timber rot away faster. You would be fine to use the fibreglass version as the resin in that is waterproof. i know you painted it but the back side is still open to the air and this is where a first coat of fibreglass would have been a benefit to seal it up. a two part wood filler is the same as bodyfiller/Bondo.

@cheryld9661 2 жыл бұрын

I have learned many things from watching your repairs. I think that I will now be able to tackle some of them myself. Thank you!!!

@jkid323 2 жыл бұрын

I ain't going to lie I was about to criticize for the 1st time but then saw the finish product and the repair came out looking great :)

@Steve_K2 Жыл бұрын

Great video. Only thing, and I know it's not too important, I'd have done differently would be to clear the leaves off the ground first, but that's just me. I lived in an older house before our present one, and often felt happy to make repairs that may not have looked good but were functional. This project was functional AND looked good.

@akenedy Жыл бұрын

Try using PPL-3X construction adhesive instead of bondo. Takes longer to set, but much faster and easier to apply since it's ready to apply directly from its caulking tube. It does expand and bubble due to off-gassing while setting, but if handled correctly, this isn't typically an issue. And the slight expansion property is usually beneficial rather than problematic, but sometimes trimming the excess with a knife or razor blade is required to get smooth joints and fills. I use it for filling and patching both wood and concrete. Although it sets with a light brown color, sunlight turns the surface light grey, which matched the concrete on my driveway as perfectly as could be expected, definitely much better match than real concrete or other concrete patching products. It just takes a couple of months of sunlight exposure to bleach the color to grey. It holds up remarkably to the elements. Extra leftover can be stored by capping off the tube or wrapping the end thoroughly with many twists of plastic wrap, then storing the tube in a freezer. Let warm up to room temperature overnight before trying to use it in the future.

@LMCEK 2 жыл бұрын

Good job:) I use Duct sealant for exterior wood patching projects. Expands/contracts with water and temperature changes in a cold climate. Easy to work with too.

@Barbie4U2 2 жыл бұрын

Your last video blew up….. you hit that KZfaq algorithm. 👍🏻 That’s how I found you. I went back and watched your videos on the pumpkin and the snowman you made out of wood. Very creative. Your good at what you do. Keep up the hard work

@skullgame 5 ай бұрын

I'm about to have to spend a week or so doing similar things to my siding & replacing/repairing rotten wood around the exterior. This helped to give me some confidence about repairing smaller sections rather than replacing the entire piece of wood since prices are still so high. Great work!

@ryane6719 2 жыл бұрын

Critical flaw, you never end primed the new boards.

@rusted5408 10 ай бұрын

Ya. The end is where it's gonna wick again

@biondatiziana 2 жыл бұрын

Inspirational. I have a rotted out door jamb that I'll repair with your technique. Great work!

@fitnessgoals1010 Жыл бұрын

Damn... the counter sink bit.... when you sunk that screw at an angle and those 2 pieces just pulled together like magnets, I was elated. I tinker around my home also, and it takes me forever to know what to do. Then another forever to do it. I am so tired of people using that damn pocket screw. It's annoying. I'm so pleased to see someone sink an exterior screw, no pocket hole. Great video. -Random female homeowner

@samenjoyinglifesamsglamllc5547 2 ай бұрын

Omg thanks so much!! My front looks just like that had no idea how to fix great job

@izenizen5532 Жыл бұрын

Nice job!!!! So glad to see that you masked up while sanding the bondo.

@puffyd58 Жыл бұрын

Excellent job! Thanks for the clear video. Very nicely done.

@JDinkel Жыл бұрын

Awesome! Love the creativity. Definitely helps me think outside the box for my own projects. Thank you!

@bradleythomas5445 2 жыл бұрын

Great to see you back in action! Awesome job!

@DiamondDustAndVerdigris 2 жыл бұрын

Well done! Glad to see a new vid! Entertaining, educational, and calming- all at the same time (as usual).🙂

@AndyD89 2 жыл бұрын

That was great! I learnt a few things from this one! “It’s only a temporary fix” he says, then proceeds to make it look like new 😜 And I like it better painted white too! 😀

@tsol438 Жыл бұрын

My pup chewed the corner off some window trim. This gave me an idea how to fix it without replacing the whole piece. Thank you!

@cynthiabrown4327 Жыл бұрын

After watching your videos, I began using Bondo for rot and repair. Thank you.

@TheFixerHomeRepair Жыл бұрын

Hey! Glad to hear that Bondo is working for your projects. Thanks for watching!

@kakolukia4ever1 2 жыл бұрын

Great work overall. For future reference, as a professional painter, my only suggestion would be to always use a good primer for either bare wood or walls. Specially got exterior. Even if the gallon says "paint and primer", your best bet is to always prime bare items 😉

@GreenDragonPainting 2 жыл бұрын

He used my favorite primer. Oil based coverstain. Great all around inexpensive primer.

@arthur113113 Жыл бұрын

so first apply primer on bare wood then coat the paint afterwards? Thanks for your sharing

@kakolukia4ever1 Жыл бұрын

@@arthur113113 Yes exactly

@juliahelland6488 Жыл бұрын

I also have a few repair issues. Thanks for sharing this! 💯

@arthuralexander1012 Жыл бұрын

Thanks...purchased an old house recently, it didn't have any gutters! so this video has been extremely helpful. New subscriber. Best regards and thanks for doing what you do for us!

@davidwostrel 2 жыл бұрын

Glad you made another video!!! Content is great, and hope you are able to keep going!

@RyanRhodes90 Жыл бұрын

Great info! I never understood why everyone goes crazy about bondo and your explanation of it being firmer and easier to shape made it click. Nice work!

@cajunfid Жыл бұрын

A lot of people hate on it because they say in temp and moisture extremes the bondo will de-laminate from the wood as a result of it not expanding and contracting like the wood does. I've never really experienced it in any repairs I've used it for but I also live in south Louisiana so other than it being really humid and wet most of the year we don't have the extreme humidity changes other parts of the country do where the failures might be more likely to happen.

@jasonanderson8660 9 ай бұрын

This video gave me the idea that I could just patch some of the rot at the bottom of my door sills instead of doing a more extensive replacement job. Before watching your videos, I'm not sure I would've had the confidence/know-how to do a small patch such as this. Thanks!

@ofeliapapendick416 Жыл бұрын

Very professional. Great choice on the lower rail board painted white, looks good.

@msierox 11 ай бұрын

Love your videos! Thanks for not making me feel like my walls are going to collapse in because I didn’t fix some damaged siding asap. Some of the repair videos on KZfaq keep me up at night thinking about every crack & crevice around my house 😂

@rainy4036 3 ай бұрын

I enjoyed watching you do your patch job! You have a blessed day and have a blessed home, in Jesus name!

@jbwentworthe6082 Жыл бұрын

Very nice ! For myself, seeing how to use those long screws, on the angle, to secure 2 pieces together was an Ah-Hah! moment. Thanks for posting the repair.

@meefthepotatoe4363 17 күн бұрын

Bruh before watching this video I was thinking that you were gonna replace the whole thing 😳 nice patch work can’t tell it’s a repair 👍

@KyNYC212 Жыл бұрын

I have rotting wood floors and had NO FREAKIN' IDEA that they could be "fixed". Thank you!!

@Chucku153 Жыл бұрын

YOU ARE AN ARTIST!!! A PLEASURE TO WATCH!!!

@polh6462 Жыл бұрын

Fantastic job. Exactly what I needed to watch to do some similar repairs at my house. Thank you. 😀

@MoreBibleReadingInTheChurches 20 күн бұрын

Thank you very much, Mr. Fixer.

@awildapproach 9 ай бұрын

Fantastic video! I truly love every part of this one. It's easy to see exactly what you're doing, and now I know why I hate typical wood filler. I'll be switching to the bondo you use here. Thanks for sharing!

@dosvaskosfarms4643 Жыл бұрын

Just found this video. PERFECT timing for some repair work on our porch. You do excellent work! Just subscribed

@sorenandersen2159 Жыл бұрын

Beautiful work there man, that's many years of getting your hands dirty and now having the confidence to get a job like that done that would scare most away

@roundedges2 Жыл бұрын

Absolutely key was pre-drilling the holes and countersinking. When you skip that and just force screws in to save time, you usually end up splitting the wood and ruining the work. 👍

@moonblink 2 жыл бұрын

When the wood expands and contracts, won't the Bondo pop off like it did on the putty knife?

@MrFreakwent Жыл бұрын

It's alwatys good to paint endgrain of SYP To keep water out, even if you cover all the joints. Endgrain is where the water enters.

@TomCee53 Жыл бұрын

Definitely. In fact, in this case I would have cut the upright 1/8” short and put a layer of silicone on both pieces, as well as the bottom. Edit. Putting four screws into a 2” long board is asking for it to split. Bondo also makes a filler for wood. When drilling at an angle, I’ve found it works best to start the hole straight enough to break the surface before drilling at an angle. This keeps it from walking across the surface before the bit grabs.

@MrFreakwent Жыл бұрын

@@TomCee53 water-thin epoxy works better than silicone if you only want to do it once and be done. Great on stair stringers. Bondo is also good IF it's not put on too thin,and is painted over since polyester resin will absorb moisture over time.

@cejkwo100 2 жыл бұрын

Nice repair, had to do the same on my garage door trim where the snow piles up. Used the bondo to repair the rot and it came out great. Enjoy your videos. Also from mass. So we know snow! Ha ha

@dabprod 9 ай бұрын

Excellent. I've used Bondo several times, inside and outside on my old house with great results.

@motorv8N 2 ай бұрын

Looks great! Good call on the white for the portion between the top and bottom of the railing.

@sorenandersen2159 Жыл бұрын

Also I wanna say I didn't know about that special kind of cement patch, thankyou for sharing that is good information.

@leod7 Жыл бұрын

The result is very neat and it looks solid now ^^ Good luck fixing the rest of your house around. You are doing a good job with a great "will do" attitude. 😎🤙🏻

@DollysParadise 2 жыл бұрын

I love the color of your house, and you done a great job!!!

@greeneyedwitchywoman Жыл бұрын

You did a really good job looks very nice Thank you for all the tips I am A do-it-yourself homeowner and this helps

@sjr7822 Жыл бұрын

Naming the tools and items used, is a plus

@ldqa2737 2 жыл бұрын

Brand new again!!! Good decision with the white rail with gray support. 😊👍

@johnhart3540 6 ай бұрын

Thank you for your tips and time. This will help me.

@armyvet8279 2 жыл бұрын

Wow first time I've ever heard of using Bondo on wood! Learn something new every day!

@TheFixerHomeRepair 2 жыл бұрын

😁👍

@JantiqueB Жыл бұрын

Beautiful job. Thanks for the inspiration.

@StereoSpace Жыл бұрын

Nice practical, high quality repair. Awesome.

@bricks312100 Ай бұрын

I really enjoyed listening to you talk. Keep up the good work!

@AutoFixYT 2 жыл бұрын

Came out looking brand new! Awesome job!

@yr1491 2 жыл бұрын

Your with is always excellent! It looks so seamless!

@wendyhannan2454 Жыл бұрын

Great job it looks fantastic, I’m 76 I’m going to have ago at this on a window pane. Thank you I really enjoyed watching this video. I’ve subscribed 👍

@johnoakes6772 Жыл бұрын

I liked your down to earth approach. Thank you and congratulations ❤🎉

@jennifermartinus4929 2 жыл бұрын

That looks awesome, Matt. That is fixing a problem. 👍

@lynnew5619 2 жыл бұрын

Looks great. I like the white/grey mix too. 👍

@brucemcnally3924 Жыл бұрын

A great job and tutorial for my own rotted wood project, this has been very helpful. One thing I would have done is cut the vertical in line with the bottom of the horizontal rail in an L shape as running it all the way down to the concrete will accelerate water damage which you just fixed superbly. Thank you for your videos and all your tips, much appreciated sir.

@williamursery2554 Жыл бұрын

Just found your videos. Gonna save me a ton of money. Keep them coming!!

@yukahi282 Жыл бұрын

What a great job you are doing ! Thank you for this video.

@TheFixerHomeRepair Жыл бұрын

Appreciate the support, thanks for watching!

@RickRuiz-ph3mv Ай бұрын

Outstanding job! Thanks for sharing.

@joe-edward 2 жыл бұрын

super satisfying fit with those pocket holes joining the 2x4 ends

@jeffreylevin1266 2 жыл бұрын

Great job. You surprised me with the bondo, good tip. I’m into Antique cars. If I can make a suggestion. Never use cardboard with bondo it absorbs the oil’s in the material. Use a plastic or metal sheet of some kind. Happy Thanksgiving 🦃.

@AlexA-ww1sp Жыл бұрын

Thank you for the video. I repaired some rotten wood on my patio using Polyurethane Construction Adhesive. It is like plastic and works just fine as a wood filler😀

@vaniavss 2 жыл бұрын

Great job, thanks for sharing!

@tonyathomas66 2 жыл бұрын

You always do a spectacular job. Good job.💕

@tracyk3567 2 жыл бұрын

For those who don’t know, there is a wood-colored, two part epoxy if you don’t plan on painting the wood. Minwax makes one version. Bondo may swell out after a bit.

@richardbastin3647 Жыл бұрын

Rather than bonds you should use a penetrating epoxy on those rotten shingles

@aubreysmith66 2 жыл бұрын

Glad you are back, hope all is well. I like the oscillating tool also, but man is it loud.

@tenthdimension9836 2 жыл бұрын

Looks nice. I've used that Bondo product several times in similar circumstances and it works great. The key is get your area very well prepped and then not use too much of the Bondo so you don't end up having to sand half of it off. For prep work I've used a Dremel tool with the grinder bit to dig out the rot and used a liquid hardener prior to the Bondo. I did some window sills that were terribly rotten about five or six years ago and they still look great.

@allencummings7564 Жыл бұрын

Nice, I've got two huge cans of bondo specifically for rotted window sills

@allencummings7564 Жыл бұрын

What's the liquid hardener bit tho?

@johnminke4542 Жыл бұрын

Good Job. I have a log home and have used Bondo for log repairs. Awesome stuff.

@Caperhere Жыл бұрын

To protect wood ends from rot, putting a piece of polyethylene cutting board material between your open grain end piece and whatever it buts against, will prevent wet from being absorbed by the wood. Attaching pieces of the same plastic cutting board to the bottom of outdoor furniture protects the legs from rot. Using stain on outdoor wood is better than paint, as it doesn’t bubble and peel. Stain can be mixed to match any colour.