No video
Ultimate Electronics Station Build
Рет қаралды 838,777
Күн бұрынSupport The Geek Pub by going Premium and get access to all of our plans and member videos:
www.thegeekpub...
Support this Channel on Patreon:
/ thegeekpub
It's time! Time for The Geek Pub to get it's very own electronics workstation in the new studio building! It's here! And it's awesome!
ITEMS IN THE VIDEO:
* Bora 100" saw guide: amzn.to/2RFvUH1
* Black 3/4" T-Molding: amzn.to/3trfMWe
* T-Molding Slot Cutter: amzn.to/3oD5sK9
* Screw in Feet Levelers: amzn.to/3yyAU0E
* 2" Desk Grommets: amzn.to/3yoaJtA
* Bench Dogs: amzn.to/3u3DpEA
* 10 Outlet Power Strip: amzn.to/33WCQlF
* Self Healing Mat: amzn.to/3v2TUST
* Weller Solder Station: amzn.to/2SaAXPH
* De-Soldering Gun: amzn.to/3tX5lKs
* Siglent SDS 1104X-E Oscilloscope: amzn.to/3owFBDs
* Korad KA6003P Benchtop Power Supply: amzn.to/2S7jDef
* HAYEAR 34MP electronics microscope: amzn.to/3oxRI3f
* Lab Stool: amzn.to/3wlxTyY
* Akro Mills Small Parts Bins: amzn.to/3Ca29A7
* Label Maker for bins: amzn.to/3n4r6b5
Detailed article and plans:
www.thegeekpub...
Find us on Social Media:
/ thegeekpub
/ thegeekpub
/ thegeekpub
Music Credit: Anders Enger Jensen
@The8BitGuy 3 жыл бұрын
18:26 - at first I thought you said "Electron Microscope" and I was getting really excited!
@TheLukemcdaniel 3 жыл бұрын
How're the repairs going?
@wiilillad 3 жыл бұрын
Are y'all like brothers or something?
@TheLukemcdaniel 3 жыл бұрын
@@wiilillad I've never met either in my life. Just watched their videos
@wiilillad 3 жыл бұрын
@@TheLukemcdaniel I meant are 8-bit guy and The geek pub brothers.... I just found this channel, and as soon as he started talking, I thought it sounds like 8-bit guy. Then I saw his comment
@Thomas_000 3 жыл бұрын
@@wiilillad yes, they are brothers
@SJFrzrbrn 3 жыл бұрын
So I've never seen your videos before, and I'm thinking, this guy sounds a lot like the 8-Bit Guy... And then he shows up. I guess you're brothers? HA! Awesome. Subscribed!
@HyperFirez 3 жыл бұрын
Ikr. I knew he had a brother, but they are both so similar. Double the content haha
@mattwilderx85 3 жыл бұрын
I knew he sounded familiar.
@Vamavid 3 жыл бұрын
You have a good ear.
@ciaaagent 3 жыл бұрын
I was just about to write the exact same thing! That's my first video for this channel and I was thinking he sounds just like The 8bit guy.
@NeoRichardBlake 3 жыл бұрын
I started writing the same comment just now, almost verbatim. I scrapped it, and just liked and commented on your instead. ;) When David showed up at 8:16 it about blew my mind. LOL Also my first time to this channel.
@christophermiller5970 2 жыл бұрын
In case you missed it. He is not making fine furniture.
@TheGeekPub 3 жыл бұрын
I finally got around to getting the electronics workbench for the studio built!
@dmdrewitt 3 жыл бұрын
Awesome. Thanks for sharing your Electronics Station Build. Good decision to make you own. It looks great.
@Thirsty_Fox 3 жыл бұрын
I'd just like to say I appreciate how much work goes into making these videos -- there's so many different angles and footage of tasks, getting it all put together, etc. Really well done!
@doorwhisperer 3 жыл бұрын
I enjoyed the zappy music / zoom change sequence
@TheMixmastamike1000 4 ай бұрын
You and your brother come across as kind, and endearing which makes it that much more enjoyable to watch what ever you two decide to share. Thanks for being awesome.
@PaganWizard 3 жыл бұрын
2:00 A circular saw will only produce blow-out or tear-out on the top side of the board because the teeth are hitting the bottom side of the board first. The melamine on the bottom has the support of the particle board above it. The damage happens on the top of the board, because there is nothing to protect it as the saw blade exits the board. A good rule is to remember, good side down, even if you're using a good quality sharp blade, and move slowly, that also helps prevent any damage. I use this every time I use my circular saw and the good side never gets damaged. Of course there is absolutely nothing wrong with protecting both sides when needed. 12:00 With your tables being as wide as they are, I would have added a stretcher along the legs closest to the walls. This would prevent any racking during use, especially with a lot of weight on the table tops. GREAT BUILD!!!!!!!!!
@jdenslinger 2 жыл бұрын
This is inspiring AF! I've built some stuff using 2x3s instead of 2x4s - Plenty strong for the shelving, and usually less expensive. Looks like there's plenty of room for some LED strips under the shelves for some added lighting too!
@jstro-hobbytech 3 жыл бұрын
If I closed my eyes during your voice overs I would not be able to tell you and 8 bit guy apart lol joking aside, great build. It's funny how I see all the same tools and irons and such that I have. The shelf height and space between them is perfect.
@Colaholiker 3 жыл бұрын
Their voices sound slightly different, but their way of speaking is indeed very similar. They just can't deny that they are brothers. ;-)
@jstro-hobbytech 3 жыл бұрын
@@Colaholiker hahahaha thanks for that. A welcome laugh from a tedious c++ lesson.
@GeorgeD_ 3 жыл бұрын
I spent half the video trying to decide if it was him, only to have him actually show up lol
@MarcoSpelde 3 жыл бұрын
@@GeorgeD_ Hahahaha same here !
3 жыл бұрын
I was listening to this from my watch later list in a small PiP window while working on other stuff, and initially thought "this is an 8bit guy video". Especially with the same background musics at some points, but the voiceover is also similar :)
@joshedagg 3 жыл бұрын
I think this new workshop series is the only thing I actually look forward to on KZfaq these days. It's coming together nicely!
@Dlutheran 3 жыл бұрын
I agree 👍
@mkjr 3 жыл бұрын
@@Dlutheran Same!
@revealingfacts4all 3 жыл бұрын
Agree, watching the journey unfold is very good entertainment. Nice work geekpub!
@Chris_at_Home 3 жыл бұрын
I worked as an electronic tech most of my working career with many years actually doing component level troubleshooting and I was never provided with a bench as nice as that. Good Job.
@davidstech1445 2 жыл бұрын
I am a current electronics tech, my bench is made of the thinnest melamine known to man, covered with burns and gouges (not me, I swear).
@Chris_at_Home 2 жыл бұрын
@@davidstech1445 I used to worked repair oil well logging tools in the 80s. There were high failure rates of components because of the well temperatures. We used high temp solder and milspec components. I got tired of it and went into communications after that and retired from it last year.
@davidstech1445 2 жыл бұрын
@@Chris_at_Home What a fantastic experience! I'm working in the communications sector and find myself working on many other odd jobs along the way. I am only a few years into my career, the possibilities seem endless. The hassle involved with the high-temp solder and mil spec parts would drive me insane. Thankfully I have never dealt with it. I hope you enjoy the retirement!
@Chris_at_Home 2 жыл бұрын
@@davidstech1445 Thank you, I m enjoying retirement. Nice you are working in communications. I started doing that in 1989 for a small company that even took me overseas some. My last 15 years I worked for AT&T doing communications along the pipeline and then working at a gateway earth station.
@davidgillingham9446 Ай бұрын
I've been (over)thinking a build for my basement area - part ham shack, part electronics hobby work station, part work from home, part book shelf. I was already planning a second garage build like this for a workbench on lockable heavy casters but with an mdf top. Hadn't even considered it for inside use but now that I see yours - absolutely!!
@feeterican 3 жыл бұрын
I work for a PCB assembly company and looked at some of the Uline products. Yeah, they are freakin expensive for even the most simplistic setups. Yeah, you did right by building your own and probably saved 6 or 7 grand on that desk. A lot of the desks we got for our company when setting up 20+ years ago was from auction or places going out of business and buying their used equipment.
@gocu54 3 жыл бұрын
I want to someday do what David did and build myself my own private office space near or next to my future house. It’s loads better than having to take an Uber 30 minutes to an hour to go to an office and I can’t drive due to blindness therefore, building an office space would be a lot better for me with my future business plans. Good luck to the both of you. Have a great day.
@donkmeister 3 жыл бұрын
Me: "This guy sounds EXACTLY like the 8-Bit Guy... They could totally be brothers!" 8:15 the 8-Bit Guy appears, helping to shift the bench. 🤣
@MZU777 2 жыл бұрын
Generally, I agree with you, shops are many times offers fancy-looking tables and shelves for huge many with acceptable quality or budget deals but with poor quality, BUT it does not mean you have to build it with your own hands, also dont have to buy/rent the necessary machines. Many wood suppliers have a simple extra service: Cutting! You just have to make the plan, the drawings, with correct sizes, and the woodshop will not just sell you the wood but will cut it on size, label it, protect the edges, AND they do it in better quality than you can do at home AND the price difference is not significant. All you have to do is assemble it.
@chrclmnky 3 жыл бұрын
Wow how I wish I had the space to build such nice station. Even just a small soldering station will do. By the way your voice really sounds like The 8-Bit Guy. 😁
@esnebta 2 жыл бұрын
Probably local dialect in that part of Texas
@Termite_Studios 2 жыл бұрын
His brother
@jdenslinger 2 жыл бұрын
Where there's a will, there's a way :) You just might have to be more creative... like maybe a rolly cart that slides over your toilet in the bathroom lol. Hey, at least there's a vent for when you're soldering! :D
@arctic_angel7408 2 жыл бұрын
glad im not the only one who thought they sounded identical
@pridsi Жыл бұрын
I like such precision after work and placing materials for the warehouse so professionally
@geoninja8971 3 жыл бұрын
I squeezed a little electronics bench into a spot in my garage years back - I didn't paint anything or remove round corners though, yours looks much nicer.....
@dwaynezilla 3 жыл бұрын
Seeing this being put together is the perfect tease for the projects they'll be used for later! That bench looks so good and inviting, and properly solid. If you were to buy one it'd easily be 2-3x the price, and you already have the experience and tools to make something that will work as well.
@legion2k988 3 жыл бұрын
Tip for people doing the leveling feet. Make sure you drill deep enough that the excess screw has a place to go.
@EposVox 3 жыл бұрын
Sick Setup!
@QueerCripple 3 жыл бұрын
"Pocket Hole Screw" yay I learned a new term! I love this stuff but have been learning on my own for years and it's hard to learn about terms and techniques without people guiding you. Even if I hate your end result for some reason, I got value from this video! 🥰
@NeoRichardBlake 3 жыл бұрын
Check out Steve Ramsey - Woodworking for Mere Mortals [kzfaq.info]. He's got lots of info and projects like this. And he's a KZfaq OG. Quite an old channel, so there's a ton of information for the learning woodworker.
@QueerCripple 3 жыл бұрын
@@NeoRichardBlake thank you!! I love KZfaq so much, I have gotten into a habit of kinda just venting about my confusion with things on people's videos, and without expecting it have learned so much more and gotten so much more help from KZfaq (creators and commenters) than I've learned in school or gotten help from my government in trying to understand things 🥰
@NeoRichardBlake 3 жыл бұрын
@@QueerCripple Glad to help. :)
@germancaperarojas4023 8 ай бұрын
Wow! You are 8bitGuy's brother. Creativity and workmanship flow from the family. Great seeing your videos for the first time. Keep the good work!
@realgamerguyvlog32 3 жыл бұрын
Hey Mike nice to see a new video
@usd_7718 3 жыл бұрын
Keep the new studio builds and updates going. It is so entertaining and interesting.
@makerspace533 3 жыл бұрын
I tend to do a lot of RF and Microwave work. So the older HP spectrum analyzers, signal generators, and power meters get a lot of use. These instruments are quite deep, and also have connectors on the back that are useful. So I build my benches with a much deeper instrument shelf. I cover the back of the bench with a sheet of plywood which prevents parts from rolling off the back of the bench and supports the instrument shelf. There is no need for a top shelf, it just gets in the way. I also use a length of 1-1/2 x 1/8" angle iron mortised into the 2x4 that supports the front of the instrument shelf. Wood tends to sag, and the steel prevents that. An HP8566B weighs 110 pounds, so you need the support for this class of equipment. Lastly, I do not place the bench against a wall. Leaving ample access to the back allows easy access to rear connectors and mounts a plugstrip on the back keeps power cables out of your face.
@brianartigas 3 жыл бұрын
I'm getting ready to build out a new tech room at our IT shop. You gave me some good ideas, thanks. Great job!
@TheBrendonKasa 7 ай бұрын
wow 2 years old but I love the look of this! well done! so clean looking!
@fastacker2 Жыл бұрын
I use a nice old desk I had that has a glass top. Put a blue silicon mat on top, Microscope, soldering station etc. on it. Then for more work room that I am not mind if it gets messed up, I laid a 3/4 inch hunch of plywood across some summports. (a plastic Stanley outdoor job box), Tons of room at the perfect (low) height. Rigged up lights and power strips, put a lab power supply, a hot air and solder rework station, a few VOM meters, a desoldering station. etc. Already had the plywood and the job box for it to sit on. Cost was nothing. Build time was about an hour to flop the plywood down and put the stuff on it. :)
@USAMark70 7 ай бұрын
You can skip the masking tape if you lower the saw blade just about an 1/8", just enough to cut the surface white melamine veneer. Then, lower the blade enough to cut through the rest of the material and make your second cut. It works SOOO much better than the tape method. And it doesn't matter a whole lot which saw blade you use, although I did use a fairly new/sharp blade. I always get some chipping with tape, regardless of the blade I use, even with an expensive melamine blade. Thanks for sharing your build! Nice job!! Love your set up! Hope to see more videos from you soon!
@davidrediger6407 3 жыл бұрын
You can also use the scrap from cutting off the rounded edge of the 2x4 as trim on the bench top and shelf edges.
@YllwNinja82 3 жыл бұрын
It's a welcome change to see someone build stuff without swearing or throwing tools! Thank you for the video!
@gocu54 3 жыл бұрын
If you like watching things being built in a wholesome manor, I recommend a channel called Essential Craftsman. He does construction, forging, and logging videos. He’s even doing a series where he is building a house from foundation to finish. It’s awesome!
@YllwNinja82 3 жыл бұрын
@@gocu54 thanks!
@lonewulf0328 3 жыл бұрын
Mad props to that simple but function design. I am planning on building a few benches like this, one on the wall with shelves, and one rolling mobile workbench, for my garage. That way, I will have a nice place for woodworking projects, maker projects, ham radio, gun maintenance, or just about anything else that I need a good solid flat worksurface for.
@robertshowe2417 3 жыл бұрын
I feel for you, been putting off my own upstairs workshop build because those sheets are such a pain to work with alone. Love your setup! Please keep these videos coming!
@pitsnipe5559 3 жыл бұрын
Many lumber dealers and home centers will precut sheet materials for you. Just be sure to add an inch to your dimensions so you can fine tune the pieces at your shop.
@josephlalock8378 3 жыл бұрын
as veteran of autobody painting, i can also tell you that you would use 2-3 times as much paint spraying framework like that vs. rolling it on. hvlp or not, there are large amounts of overspray from small narrow parts.
@TheGeekPub 3 жыл бұрын
Super good point.
@ElTioMichel 8 ай бұрын
I was just going to comment that his format reminds me a lot of 8bitguy but now i see the comments you guys are family, that explains a lot :) Great video.
@thereisalie819 2 жыл бұрын
You explained everything clearly. Building desk this summer, will be a little like working with Dad. Thank You!
@mkjr 3 жыл бұрын
Seeing a new upload from TheGeekPub always puts a smile on my face :D
@37racso 3 жыл бұрын
Congrats on a new workbench and thanks for taking us along through the process! Big props for not buying an off-the-shelf one and going diy!
@lusher00 Жыл бұрын
I used ClosetMaid track shelving for all my test equipment overtop a couple of Uline office tables. I thought about it for a couple years before I finally did it. It turned out better than expected and I can’t stop looking at it.
@FuhrChris 7 ай бұрын
My outfeed table is another Older tablesaw. A 1932 Atlas sold under the name of "Craft'sman" the ablity to change it's blade angle is in need of repair so it's a deadicated Dato saw. We've ripped 20 foot long boards from a mill without them falling off the table.
@diarrhea_splatter 4 ай бұрын
I'm about to start finishing my basement and my room will be a music studio. This workbench seems to be exactly what I need! Plenty of plugs, lots of room....can solder and track a recording with ease.
@youtubecommenter4069 3 жыл бұрын
What I like most is that you did not "hurt" the wall for a wall unit size workstation top and shelves.
@Thewickedjon 3 жыл бұрын
how was I NOT subscribed to this?!?!?!
@RespecWamen 6 ай бұрын
It's not every day that I get the urge to create something after watching a video, and it's especially not every day that it's a video of such high quality. Subscribed!
@CoreDreamStudios 3 жыл бұрын
Subscribed! Thank you The 8-Bit Guy for recommending me to your brother's channel. :-)
@jkmsaturn 3 жыл бұрын
Welcome to 'Mike's Not Fine Furniture Store' Really enjoy the building build-out updates.
@kenw5890 3 жыл бұрын
What I did was look for auctions and such, I found a local biotech company that was downsizing and picked up around 20' of metal base cabinets, 2 chemical epoxy tops (7' x 3' and 8' x 3') and got a few nice steel case office chairs and lab stools all for 2K. May be a bit pricey compared to this build, but have drawers and cabinets is a big bonus!
@dr.rotwang 3 жыл бұрын
Excellent video! I am now super envious of your new workstation. I do have one suggestion though. You might want to think about adding some diagonal cross bracing on the legs, especially on the long span. I've built many gaming tables, work benches, and side tables over the years in a very similar design and all of them have ended up needing diagonal bracing. Granted yes an electronics workstation will take much less abuse than a workbench where you are sanding, cutting, using a planer, chisels etc. But sooner or later just from chairs bumping it and people leaning on it while working it may end up developing a wobble in one direction or another. Might want to add some cross bracing while its relatively unencumbered.
@TheGeekPub 3 жыл бұрын
A single 2x4 has a nominal load capacity of 375lbs. So in this case 750lbs. Ceilings in houses carry far more weight (in light fixtures and drywall) than this will every carry. So I didn't believe any cross bracing would be needed. I'll do an update video in the future if that turns out to be the case.
@dr.rotwang 3 жыл бұрын
@@TheGeekPub I agree with you completely on the carrying capacity. It is more than capable of withstanding any compressive load you could put on it. In fact I'd go so far as to give it a full 5X Trinitron rating. :D The bracing I am referring to is to resist any lateral, sheer, or torsion forces that could be applied to the leg joints overtime from people leaning on it, moving it around, bumping it, etc. the wood around the screws that secure the legs to the top will compress and begin to hog out the holes that they run through. Ultimately this will results in a wobbly bench. It will by no mean collapse but you might end up with a bench that rocks or wobbles when you pull yourself up to it or push away from it on a rolling chair.
@philfrydman2576 5 ай бұрын
Great job. Wish I had a similar bench for my electronics.
@dan-allen 9 ай бұрын
Thanks for all the pro-tips! I also really like your balance of thoughtful touches, simplified construction and still looking really nice.
@TheMchip 8 ай бұрын
its awsome!!! looked this video 1 year ago but still love it!
@MrDksmall 3 жыл бұрын
I use a sheet of 1” insulation foam under the wood to support it during circular saw cuts. You will cut into the foam but that’s what it’s there for.
@anoirbentanfous 3 жыл бұрын
Thank you so much for sharing the steps but over most the tips and tricks that can apply to other projects
@ItalianRetroGuy 2 жыл бұрын
I've watched this video countless times. Once I get my own studio, I will have this exact same desk.
@nevillecreativitymentor 8 ай бұрын
NOiCE 🏆 Sitting down and taking that final shot ... SATISFACTION.
@MrJozza65 3 жыл бұрын
Love the idea of using T moulding to finish off the worktop edges. Looks neat, and will resist knocks and scrapes that are bound to happen over the years.
@TheGeekPub 3 жыл бұрын
Yes. And its super easy to replace if damaged.
@shinigamilee5915 3 жыл бұрын
I agree T-Moulding is the best choice under an electronics bench. I have had the sticky moulding pull parts off the table before, trip people, and stick to my arm hair. It's really annoying.
@Sylvan_dB 3 жыл бұрын
Heh. I hate the t-molding on the front of a desk/bench exactly for the arm hair reason! Seems like a hair is always getting stuck in the little sliver of a gap between the molding and the surface. I was always pounding on the t-molding at the office to try and close that gap. I've never had a problem with the iron on strips - it does need a fairly smooth cut surface, no loose dust, and a nicely hot iron held long enough to melt the glue. Don't bother with the self-adhesive "peel and stick" style. After the glue cools, use a razor blade to trim flush with the surface.
@JKNProductions 3 жыл бұрын
That bench looks great.
@theOrneryMaker 3 жыл бұрын
As a temp solution to your ourfeed problem, get yourself an adjustable outfeed roller from Harbor Freight. I think they are about $12 and they will save you making dangerous reaches until you get your table built. I don't often suggest HF but I use my roller a lot even after building my outfeed.
@Rivenworld 3 жыл бұрын
Nothing like a custom built workstation that suits your requirements perfectly, looks brilliant, nice job.
@chadj1797 2 жыл бұрын
Hard agree
@6stringfidgeter Жыл бұрын
Looks great and better yet, it's functional for what you need
@peterschmidt9942 8 ай бұрын
Nice build. I'd also be making some recessed shelves for underneath the bench for more storage.
@deltahawk1001 3 жыл бұрын
If cutting a material that chips easily it also helps to use a saw blade with lots of teeth as opposed to fewer teeth. That way it is essentially taking a smaller "bite" with each tooth.
@TheGeekPub 3 жыл бұрын
Yep. That's also good advice.
@pigseye2 6 күн бұрын
great looking station! thanks for sharing!
@leandrocarg 4 ай бұрын
Ultimate dad project! Very nice!
@danielshin1984 3 жыл бұрын
T-molding!!!!! That's the one I love!
@MrAprrc31 3 жыл бұрын
I am glad to see that im not the only one that thinks he looks, sounds, films and edits his videos like The 8-Bit Guy. Would be interesting to see a collab
@TheGeekPub 3 жыл бұрын
We're brothers. There have been several. ;-)
@MrAprrc31 3 жыл бұрын
@@TheGeekPub oh nice!, just ran across your channel. I'll check them out!
@TheTalisman515 4 ай бұрын
This is a dream setup
@KevinFields777 3 жыл бұрын
Literally cheap for twice the price! What a great budget build, and it looks just as clean and nice as any professional equipment you could buy!!!
@fonephreak02 8 ай бұрын
I just came across your channel. This is one of the best videos I have seen in a long time.
@ClaudioBalbin 3 жыл бұрын
That's a very nice build! Using the right tools really makes a lot of difference.
@hopelessnerd6677 2 жыл бұрын
Nice! I usually build the top slightly oversize then cut 1/4" off of each edge to remove the round-over on the 2x4's. Either way. Love the T molding idea!
@TheGeekPub 2 жыл бұрын
That's exactly what I did. :-)
@RickGreenPhoto 3 жыл бұрын
IMHO: Flip the sheet over and use tape when using the power saw to eliminate the chipping on your straight edges. Great video and I love the table. Thanks
@peterfitzpatrick7032 3 жыл бұрын
Or make an initial scoring cut, a couple millimetres deep first... 😎👍☘️🍺
@gotai8 3 жыл бұрын
This felt like watching a 8-Bit Guy video from a parallel universe
@ThePhrygianFingers 3 жыл бұрын
It's like they are brothers or something!
@jamescolannino8694 3 жыл бұрын
I was listening to the background music, thought, "this is just like an 8-bit Guy video," then remembered who's channel this was.
@mcmahon31619 3 жыл бұрын
So true🤣🤣🤣
@tiborvegh700 3 жыл бұрын
@@jamescolannino8694 He also totally talks like him.
@geoninja8971 3 жыл бұрын
They must have been separated at birth.....
@rwdplz1 3 жыл бұрын
How has KZfaq never recommended me this channel?!
@arcadely 3 жыл бұрын
I only found out about it by watching the 8-Bit Guy's Apple I video that he just posted, and he just casually mentions at the end that his brother is going to build a case for it.
@TheGeekPub 3 жыл бұрын
Glad you guys are here!
@josephnavarro3620 5 ай бұрын
Nice clean workstation built for a great price, excellent! Thanks for sharing.
@Critikal4k 16 күн бұрын
This is exactly how i saw my dream lab but yeeeeaaaahhhhhh.
@ieyazzu9297 8 ай бұрын
not only the content is good, the videography and editing is also amazing. you did a magnificent job!
@Super_Bros. 3 жыл бұрын
I am truly amazed by the end result! That work station is of superior build quality. Awesome!
@rickkephartactual7706 Жыл бұрын
Okay, I am very jealous of your set up. You are an inspiration.
@minskmade 3 жыл бұрын
what a freat build and i love all the awesome tips...the t molding is definitley in my next build...thank you for the informative video. keep up the great work.
@TheGeekPub 3 жыл бұрын
Glad to help!
@TheZooman22 3 жыл бұрын
Nice setup. I like the black edge around the table top. Very nice finish.
@Psychlist1972 3 жыл бұрын
Nice workstation build. You may want to get a fume extractor for the same reason I recommend a dust extractor. Haako makes a nice one that is self-contained, supports up to two hoses, and has a built in huge filter..
@TheGeekPub 3 жыл бұрын
I have the Hakko unit already.
@Psychlist1972 3 жыл бұрын
@@TheGeekPub Oh nice. That's a great air cleaner. Much better than the little desktop fans.
@c4t4l4n4 3 жыл бұрын
You might want to consider a sheet of plywood or a hard plastic mat for your chair. The rollers will crush the underside of the carpet, with nice divets where you spend most of your time sitting.
@TheGeekPub 3 жыл бұрын
This is commercial floor tiles. Not regular carpet.
@Hanesy 2 жыл бұрын
having that kind of setup makes me think how cool you are 😊😉
@johnwest7993 2 жыл бұрын
The first thing I'd want to build for my workbench is an 18" to 20" lazy-Susan to set whatever I'm working on on my bench so I can easily turn it around while I'm working on it. (I use a screwdriver under the lip as a brake to hold it still. I'm pretty low tech.) I've found it to be about as important a tool as my soldering iron and 'scope. It's especially handy for working on old HP test equipment. That stuff all seems to start at 50 pounds and goes up from there. And I'm not as young as I used to be.
@tgirard123 2 жыл бұрын
I'm soo done with using my lost and found sectional desk that is the wrong size and uses those Damn 'Peg' shelves that always seem to slip off the pegs. thanks for reminding me that I can build what I need...
@drummr187 3 жыл бұрын
Just use the rip halfway and flip and rip the rest of it, works great and super safe without an outfeed table.
@Californiansurfer 3 жыл бұрын
IKEA uses particle wood learned my lesson. Today with covid, I been offered front office space, everyone works from home. I enjoy my lab.
@leebirchenough8890 3 жыл бұрын
please do more videos with david. i love it wen u guys shoot together
@ricardowagnerteixeira7604 3 жыл бұрын
Man, that's exactly what i have to do with my electronic lab. Build a workbench will be my next job. Thanks for the inspiration. By the way, i like to work with joinery too.
@t1d100 Жыл бұрын
Nice build. I am presently working toward dividing my soldering space from my testing space. The two purposes really just do not mix, for a myriad of reasons... melted probe wires... solder splattered into open DUT cases, etc.
@kraftaculousgreekgodofcraf1113 Жыл бұрын
I took a shot every time you said “this is not fine furniture” … and now I’m drunk …
@justinfetter1345 7 ай бұрын
Work smarter AND harder! 😊
@ender77769 8 ай бұрын
This is the first of your videos I've watched and I immediately thought, "This looks, feels, and sounds like an 8-Bit Guy video". Then David came to help move the table lmao. Great content guys!
@pitsnipe5559 2 жыл бұрын
Reminds me of when I was in trade school in the 1960’s training to be an electrician. We needed an electronics work bench so we asked the carpentry shop to build us one. Like yours, it was strong and sturdy. Several years after I graduated I stopped by to say hello to my old instructor and that bench was still there, strong and sturdy as ever. The cartoon I taped on it in 1968 was still there! Like the edge banding, looks good. Thought at first you’d use the cutoffs from the 2x4’s.
@paulspark7287 3 жыл бұрын
Man, I wish I had the space to build something like this. I already have my computer/music workspace in the living room :-)
@WildkatPhoto 3 жыл бұрын
First time viewer and I was low key freaking out thinking "He sounds like 8 Bit Guy". Im a subscriber now!
@TheGeekPub 3 жыл бұрын
Welcome!