Its always nice when the homeowner gives free help! Almost always makes things go smooth and you know EXACTLY what they want...screw placement and all !

Isn't it crazy - the more room we have, the more room we need. Those garages are huge.

So happy that you two found each other and had a good time. Hope you two do find future projects. It should be interesting to see. Maybe you could film another project in Florida... :)

He leveled up half way through and upgraded to a vest! Two months in and he would habe a full truck and trailer

So Handyman do all your Subscribers get the official Handyman Fat Max Work vest? JEALOUS!!!! I want to be a Handyman mini me!! LOL!! That was pretty funny to see him put that on! Great video, great content as usual, can’t wait for the next one! 👍😎🛠🌵

I worked with a customer on something similar, he insisted on helping. The week leading up to it I was thinking how terrible it's going to be having to work with the homeowner (I am picky about anyone helping at all). Much to my surprise, the guy was super cool and easy to work with! Has to be rare, because the yappers and break takers have to be out there...

GREAT Video! I watch a lot of your videos and really enjoy them. I just saw this one and it's coincident that I just purchased one of these ceiling hanging FlexiMounts for my own garage that I will be installing this weekend. That was very brave of you to trust the product and your work by crawling up on them :) Great job by both you and the homeowner! Thanks for the video! Todd

That’s a cool garage storage system. I made a similar one out of metal studs and plywood. Great channel man!👍🏻 Take care, -Paul

The vest! What a stud. Pretty nifty idea too would've been quite a bit of wasted space. Nice work. Keep the videos coming!

I installed a similar type of garage storage racks at a clients house and it was a PIA. My clients garage walls and ceilings was finished so I used a stud finder to locate the studs and extreme care not to damage the ceiling. 3 hrs later it's installed. Funny thing was he wanted a second identical rack installed but we couldn't find a place to put it. He ended up giving me the rack and i'm going to install it in my own garage. The racks, are such a great idea and super useful! Why didn't i think of this?

Cool stuff. I have a magnet wrist band that I use for loose washers, nuts & bolts.

New to your channel man. Fooking loving it. Learning a lot. Looks a bit strange doing work for a sub, but I can see the subscribers logic. Fair play to you both

Great work and awesome patience. Almost got confused since the customer had the same vest lol j/k. Cant wait for the next job👍

So easy that you can see the studs / joists.

I LOVE HOW HE GOT "THE HANDYMAN WORK VEST" LOL You inspired him hahahaA

This dude's garage is bigger than my whole house!

I'm only at 4:07, hilarious, it's a HANDYMAN mini me!

Did you charge him extra for his “help”. Customers slow me down when they “help”. Lol

Absolutely nothing against your customer personally, but I've always had an aversion for someone "lurking" over my shoulder when I'm trying to do my job. You definitely have way more patience than I do. That being said, with your attitude, and work ethic, I would totally hire you to do the same thing. Great video as always, and btw, you have me sold on the vest now also.

Nice that the sheet rock was not finished. Enjoy your videos.

have to get my does to get up to date on your video's love the alvin and the chipmunks keep it up great jobs...

I think that was great for him to do some work with you. To funny with the work vest minME!

Great videos... keep up the good work.

Great small project!

The customer even use a tool vest!! Awesome!

isn't that cute, matching vests! good work bud

Hahaha, you guys look like twins.

Beautiful guys! I was hoping somebody could show me how to map the ceilings out with laser lines…

Great Job, excellent video.

What's better shelves made out of metal like on this video or made out of wood, thinking of using 2x8 and 2x6 for support.

nice install... ive thought about installing these before

Great job !

Great video. Only missing the HF channel locks.

Hey I asked you to come to Ohio months ago. Come on Handyman! And now we can even race our Toros!

Nice job

Now he can tell us all of your secrets moves for building and fixing things that you won't share in the videos!

How are you able to mount it in the corner where the ceiling and wall meet?

Hey Handy Man hope you're fine. Any ideas for AC that are installed on the windows for summer season? O would like something with plexiglass, I've been doing a frame for the plexiglass with wood which goes in the gap created by the AC and the window, the little gaps remaining I close them with foam, but I want to know if there is something better and good looking than that. Let me know you're ideas

Good day sir. If you mind i have a question. What drill size will i use for the screw St8.0x60 Tapping Screw? Is it 7/32? Thank you.

Twinsies with the vest..how cute. LoL

Great place to store all the crap you never use so that you never have to see/touch it ever again.

By the way I have a contract to do Flexi mount garage storage racks. Always looking for an easy way to do it by myself, as I am a one-man show

With 50k subs, I guess it was inevitable that you'd have a subscriber as a customer sooner or later.

What do you use to edit? I use hitfilm. Its ok. I am currently editing 50-70 videos before I put any more out. Idk how you shoot them out as fast as you do

That guy wants to be like you so much, he probably wouldn't tell you his name.

First rule of ladders- Never stand on the top two steps.

Dam! That thing is strong

Did you do anything special to mount the two 8' racks right next to each other?

How much was your bid for this project? I have the same project to do tomorrow but only two racks instead of the four that you have

I liked how he had a tool vest also lol

I did a job like this last month hanging two 4x8 racks very similar to these from a garage ceiling. When it came time to hang the 2nd one, I called their customer service and asked if it's OK to hang 2 vertical posts of adjacent racks from the same single ceiling bracket. CS told me it's not safe and should not be done. So I ended up hanging it non-adjacent. I see you hung your 2 vertical posts from the same ceiling bracket. Are you sure it doesn't pose any potential risk/danger?

Pretty sure my first apartment was smaller than that garage. Probably my second too.

Y'all have matching vests!

Good kids , very helpful of you. 1:56

The thumbnail for this video shows racks installed in a corner. How do you position the mounts for the adjacent sets?

Hahaha. How cute. Matching vests. :-)

I hope to see the door video, Frustrating my house has rounded doors all through it and they look amazing but old and I want to build a more secure front door that doesn't have glass all the way from top to bottom. Its like a big rob me sign. Thankfully everything I own that's worth anything is in a room that has a hidden door that has locks and reinforced.

Hi. How much cost labor , size 4*8. Thanks

It's going to be a pain to replace and wind that torsion spring when it breaks. Not a lot of room to work overhead now.

Would love to see a tutorial on how to install recessed lighting into a ceiling with no attic!

Hey man I got a question for you where can I get a cheaper glass shower door or order one from Other than Home Depot and Lowe’s

Its great and all ... but did he give you a " Thumb's Up "

Putting up my own with 2x4s, 1x4s and plywood. They dont look nearly as nice as that set up. I would not like them 4 foot deep though. Mine are only 31 inches deep. Just enough for rubbermaid tubs.

Videos for these ceiling systems always show studs on 16" centers and running the correct direction. My garage is trusses on 24" running perpendicular to what the instructions and videos show. The ceiling supports will not line up for the 3' deep shelves, I fall between trusses. (Fleximount 6x3 foot). Can I mount some 1x4 perpendicular to the trusses to get them going in the right direction and then mount the system to these boards? The load will not be anywhere near the 450# rating. Or am I over-thinking this?

Great video. Where can I get that vest?

These are on sale today on Amazon

How do these compare to just making something out of unistrut?

Did he play James Taylor, "Handy Man" while you were there? Huh, huh?

Just a tip my friend: during the time when your filming, & when your not addressing the camera, or your audience, dub in some light hearted, motivational Music.

What is that J hook called?

lol the professional helper cause i bought this shit and i dont know what im doing...LOL

the customer should have painted his garage before installing the shelving units. Its gonna be a pain to paint now.

Nice to have a helping hand eh?

What kind of watch do you wear?

3:41 Twins!

Was it awkward at first? Did he offer to help?

I wish I had a high ceiling in my garage.

With the shelf being that deep, how in the world are you getting stuff out of the back

Lol I think he likes you bro

Something something... additional point loads... something something... need beams for rafters... something something

Awwww, you have a twin!

How much did you charge?

Man i would like to do that for a living.. factory life sucks

What have I been doing with my life? Damn that dudes garage haha. Got to be careful people. Don't end up married too soon and having kids and getting into a rut. Hard to get out of.

Why do people NEVER talk about rafters versus trusses? Can anyone give me a link to anything on the internet that warns people about installing overhead shelving into truss systems?

Do a vid with the Dog....

He must have a man crush on you. Total diy project lol

Do you charge extra when the customer wants to help? haha

Inventory Home depot supply has a part number system as do other companies like sears craftsman. It is helpful to either takecan inventory software program that allows you to inventory a harage with shelf number and container #. Then when you want to access a bin in your garage iy can be on a clip board. Ladder safety when i took the turner construction sub contractor class ten years ago there submission of a bid required a osha safety audit screening. I know this maybnot be necessary. Bit your web site is an educational tool. Byw the inventory software can copy yhedales receipt and photo of the item for insurance purposes. With hurricane season might be a project in interview of independant insurance adjuster. Maybe ins company would sponsor your program like this old house. Or local broker can pay you. Nice to see live broadcast always suptised how lax your staye is. Living in ca and wa there are regulations . In wa you need a license to install Mini blinds. Wtf rotflmao. Byw i buy 4" numbers on my bins to match excel spread sheet that is exported out of the software and backed up to zip drive. In my safety deposite box abd copy insurance agent. Great job

Those racks must gave been attached to joists and not trusses. We want to add those or something like that but you can't hang stuff off trusses.

Give us a update video on your trailer.

At least u dont have to look for joists

First!

I go into alot of customers homes. Did you find it annoying he was trying to help? I always do when they try. Granted that is with what I do. Just curious homie.

86 the magnets, just put it in the pocket.

Did you magically know where the joists were? I didn’t see you locate any of them with a stud finder, tapping, etc. That’s the most time consuming part with these installs.

Omg my insurance company would flip their shit if they saw me crawling on that. Lol.

6:10 i was scared as hell

Where's Handyman Mini-Me's sandwich?

Question for you all. How much would you price this job? I would rate around $200 to $300. Knowing I'll spend 3-4 hours working, plus having a helper... What do you guys think? Fair? High or low?