How to repair damaged clear coat AT HOME! with SPRAY CANS!

Рет қаралды 5,240,195

3 жыл бұрын

Learn how to repair your damaged clear coat on your car or truck. I will show you how to prepare the surface for primer, paint, and a new layer of clear coat. I'm going to be using basic tools so that you can do this yourself at home without breaking the bank.
MERCH teespring.com/shop/white-red-...
PRODUCTS USED IN THIS VIDEO:
Chemical Guys Polisher Kit amzn.to/3556PJJ
Compound and Polish amzn.to/32015PJ
Best Clear Coat Ever amzn.to/2QT1InK
Perfect Match Paint amzn.to/3i1YPNt
TSP Cleaner amzn.to/3bqcXxu
Tack Cloth amzn.to/358DpdY
Sand Paper Kit amzn.to/3jRNaRT
Frog Tape amzn.to/351VWbM
OTHER Acura TL VIDEOS:
DIY at home rattle can paint job • DIY at home Rattle Can...
Oil Pan Replacement • 2003 Acura 3.2 TL Type...
Brake Lights Don't Work • 2003 Acura TL Type-S B...
Brake Lights Fixed • 2003 Acura 3.2 TL Type...

Пікірлер: 2 300

@HomieHektor 3 жыл бұрын

This is actually a continuation of this video 👉🏼 kzfaq.info/get/bejne/ntCRec-Kr9iydKM.html Be sure to check it out, it’ll help out 👊🏼

@BigChiefSixty 3 жыл бұрын

Orale ese quavo mui mui bonita vato 🙏🏻🤝🏼👊🏼👍🏻🤘🏻🤘🏻mucho bueno👊🏼

@donproctor4480 3 жыл бұрын

I could see that the top of the door was a bit bluer, but that also could of been that the primer may have what we call bleed thru, giving it a lighter or bluer appearance. Basically you may not have got it covered with the color enough. It could also be that the color was not agitated good enough to. (Shake it for 5 mins)

@zealgaming9123 3 жыл бұрын

How long does the paint last?

@alejandrovilleda4188 3 жыл бұрын

@@donproctor4480 z.

@alejandrovilleda4188 3 жыл бұрын

@@donproctor4480 x

@SophieBird07 2 жыл бұрын

I’m a 70 year old grandmother with a 2003 Honda Accord, I just bought with 250,000 miles. Lots of clear coat missing. But I loved watching your video and might even take on the challenge! It can’t get much worse than it is now. Thanks for the great info.

@sa1nt_john.v1 2 жыл бұрын

Did you ever try it?

@SophieBird07 2 жыл бұрын

@@sa1nt_john.v1 Well life got in the way, but I still plan to.

@northzealand 2 жыл бұрын

@@sa1nt_john.v1 share with us what u did

@jb2cold 2 жыл бұрын

70 year old on youtube comments huh??????

@mariaherradi8732 2 жыл бұрын

@@jb2cold Why not ? 😊

@wateringflower Жыл бұрын

I'm a 73 year old vet. You have inspired me son. I'm gonna try this on my old dodge ram

@brendamoore6849 3 күн бұрын

I'm a nurse, and you need to wear a mask while painting !!!! Protect your lungs!!! Your videos are amazing, and I learn so much from you!

@mike325ci Жыл бұрын

Finally showing the actual process instead of skipping/editing it. Because when we try at home, and we get what doesn't look to be the shiny clear mirror finish, we get discouraged. Good to see what it looks like "mid-way" to see what we have to do to get the end. Honestly, turned out A LOT better than I thought it would. This should be OK for most people who don't care for show-quality, just want the unsightly clear coat peel gone...

@roncupp7324 Жыл бұрын

Lol hell a body shop did my 2 front fenders and hood for only $200. Screw all of that crap, I've worked on my own card all my life now I'd rather pay someone after getting a estimate

@1dandy49 9 ай бұрын

The body shops around Charlotte want $700 to do one door. @@roncupp7324

@hokuk9training970 8 ай бұрын

@@roncupp7324wow that’s really cheap is that a normal price?

@JOEGGGJOE 3 жыл бұрын

Don’t do a mist coat just to finish the can on the last coat, that’s why you got orange peel. That’s the best 2k rattle can out there. If you spray it rite, you can get no orange peel. Glad to see someone actually doing the correct steps (Sand, prime, base, & clear coat).

@dkindig 3 жыл бұрын

Ditto on actually doing the correct steps, glad to see that. I've got to repair an area that was poorly done by someone else, clear flaked right off. I suspect that they attempted to spray the clear over the original base coat and I found out that clear needs to chemically bond to the base shortly after the base is sprayed for best results. Now I know that I have to go all the way back to primer for best adhesion...

@garrykennedy5484 3 жыл бұрын

I thought that orange peel came from doing too heavy a layer. I'm not painter, but I did stay at a Holiday Inn Express last night.

@bazzaoffreshwater 3 жыл бұрын

I find that you always get orange peel with 2K clear coat spray can. On the bright side - wet sanding and buffering with compound sorts it out and the cost is mostly elbow grease.

@LifeofAK777 3 жыл бұрын

I was going to say, wet coats instead of misting it on would help a lot with the product settling smoother

@megaman4201 3 жыл бұрын

@@garrykennedy5484 no, he was spraying very light to medium coats... Definitely should have been a little wetter on the last two coats. Also he was almost completely missing the end of the rear door on both the base coat and clear coat, make sure you give the edges a little extra attention or you will be buffing through! Primer was almost barely covered with the color coats. TC 30 years experience, collision and refinishing, Annapolis MD

@nordicpride9708 Жыл бұрын

Great video. A modification I would make is getting the paint code and going to a paint store where they can factory match and put in an aerosol can. The results would be about as perfect as one could expect. The one variable is this existing paint is OLD and pearls are very hard to match. Also def be aware that 2K has isotopes that will KILL you. Wear a appropriately rated respirator whenever you spray 2k paints/clears. Stuff is no joke!

@Somelikeitthrift 11 ай бұрын

Didn’t know this was a thing! Thank you

@NAls-zm4fm 11 ай бұрын

You can take the car paint code and take the car itself to those who would do the mixing for you and they will be able to match the color for you. Well done

@StookDog Жыл бұрын

I watched this like 10 times and let me tell you my fender flares look SICK now! I will say you make it look a lot easier than it is and it takes a ton of elbow grease to properly sand but if your instructions are followed you will get good results! Thank you Hektor.

@Steve_Mazza Жыл бұрын

Nice work, and I like your honest assessment of the repair at the end. You can tell there is a difference in the old and new paint, but it looks very good overall. My only criticism is - don't spray 2K products without a cartridge respirator and goggles, at a minimum! That stuff has toxic solvents that can mess your nervous system up.

@viciousvic100 Жыл бұрын

I peeped that and was yelling about a mask at the screen. The shit in that stuff is nasty

@randabuffer6562 Жыл бұрын

Goggles lol

@timbradt5765 Жыл бұрын

Glad someone mentioned that. Isocyanates bad. Cartridges also must be rated for organic vapors, And if they aren't brand new they should have been stored in an airtight bag and only used for 6 to 8 hours total. If either of those conditions haven't been met then be safe and buy new cartridges.

@niemand000 Жыл бұрын

@@lGraytheferalcat What after-effects are you experiencing?

@dealerhealer3673 Жыл бұрын

I like to light up a cuban cigar and just spray a full vehicle with 2k paints while my garage is closed. Brings me back to the 50's

@ssjwes 2 жыл бұрын

I saw my uncle using a spray can to paint his car when I was younger and I thought he was crazy. The next day I was amazed at what he could do with a can of paint. Looks great thanks! Going to do this soon to my Tahoe. Needs a lot of work.

@Funsho97 Жыл бұрын

I had an Uncle who was a sign painter and did lettering by hand. My Dad had some tour buses and I watched my uncle paint a beach scene on the side of one of the buses and he used spray cans. Yeah, I thought he was crazy too. I asked him why he was using plain ol spray paint and he said it was basically like air brushing. The beach scene actually came out really nice.

@TralfazConstruction Жыл бұрын

Forty-four years ago my younger brother repainted my '70 Mercury Capri using a sprayer that attached to the exhaust port of a vacuum cleaner. He worked on it in his spare time and it took five weeks. Most of the time was spent preparing the vehicle to be painted. My brother more or less made me promise to not get antsy and want to look at it before he was finished. It turned out great. We still talk about it. My brother did a great job with the body preparation. This was all done in a time when cell phone cameras didn't exist. What gives me pause now is thinking about how _no one_ even thought to take a single photograph before or after so all I have are the memories of what the vehicle looked like before the job and afterwards.

@nightshiftresto3159 3 жыл бұрын

Great video Homie! I have a restoration shop and this is good advice for people on a budget that do not want to pay for expensive repairs, but still want it right. You might already know this but 3M has a hook & loop wet 3000 Pad that saves a lot of wet sanding time. After I started using them I would not go any other way!

@wildestcowboy2668 2 жыл бұрын

Where do they sell them at, I'm in Tennessee and our body shops here are a bunch of clowns. Pill Poppin drug dropping drunks

@stevecollier4741 2 жыл бұрын

I go as far as 6000 3m trizact pads it really saves a lot of time on polishing

@MRMULINARO21 Жыл бұрын

Agree. They’re padded too so they have a decent amount of forgiveness. Much easier and won’t leave lines if any contaminants get on there as easy. There’s knock off ones too btw for cheap jobs

@billsimpson2392 9 ай бұрын

5:42 Spraying 2K without a respirator man...All the best my friend!

@grogers8994 11 ай бұрын

Absolutely the best realistic DIY video of getting a goos finsih with readily available equipment and clear start to finish. This video genuinely helped me do my own DIY paint repair with great results.

@nezzuno1 3 жыл бұрын

Finally! Someone gives a good presentation on how to fix clear coat with spray can! I watched so many bad videos on this topic before landing on this. After a few steps of trial and error and before I watched this, I did something similar. The results were equally impressive. The two steps I added were to use a polishing compound after the cutting compound and to wax as a final step. The polishing compound will give it an even better mirror like finish. And of course the wax will help protect the new paint job! Thank you for posting this Hektor!

@Lastcallrepent 2 жыл бұрын

Great job ! I'm concidering this on my truck soon !

@channell11 Жыл бұрын

You don't want to wax fresh paint right away. Even though the paint appears dry, it's still curing. Generally you'll want to wait between 60 and 90 days before you wax fresh paint.

@BoostedFA 11 ай бұрын

@@channell11 I was looking for this comment.

@swifty2844 3 жыл бұрын

Great job mate, please wear a proper 2k mask when spraying that though. That stuff is full of nasty cancer causing chemicals. Stay safe 👍

@pullingthestrings5233 2 жыл бұрын

He's been doing it for years and no cancer yet. He's a professional.

@skrtskrt3429 2 жыл бұрын

Pulling The strings try 10-20 years buddy

@pullingthestrings5233 2 жыл бұрын

@@skrtskrt3429 more than likely he'll die of something else before then

@stefandzankic1904 11 ай бұрын

@@pullingthestrings5233 it's coming over years. So yeah it's better to secure your health

@affendyismail2136 7 ай бұрын

long term effects may cause nose or lung cancer, better wear respirator mask yaaa

@DexQuin Жыл бұрын

Homie Hektor I must say you got it going on brother, I like your style!

@annabellevaughn5968 Жыл бұрын

This is the best demonstration I have seen on how to reasonably get rid of failing top coat.

@pablobucello8233 11 күн бұрын

Ojo que hay que lijar bien esa capa hasta la pintura para luego poner el Primer ...y después la Pintura ....es importante lijar las capas una Vez secas para darle más Acabado liso ...y entre la última capa de pintura y la primera de Barniz transparente no puede pasar más de 30 min ....ese es el secreto de la Bicapa.

@mattkaiser8984 Жыл бұрын

That’s legit inspiring. It looks so satisfying and a fun way to spend a weekend. Thank you for this video and showing us a REAL affordable way to have our old things be nice again.

@Snicker60515 3 жыл бұрын

I love how with your ham-handed approach to painting, you didn't get any runs on the paint on a vertical surface! Now that's confidence! And the fact you probably only spent about $75 on materials makes this project worth doing. Any videos on painting door mirrors and handles??? Love this! Great job Hector!

@seekhimwithallyourheartand3358 2 жыл бұрын

Repent to Jesus Christ “But he was pierced for our transgressions, he was crushed for our iniquities; the punishment that brought us peace was on him, and by his wounds we are healed.” ‭‭Isaiah‬ ‭53:5‬ ‭NIV‬‬ L

@jcobra09 2 жыл бұрын

@@seekhimwithallyourheartand3358 what does this have to do with painting a car?

@GreenWitch1 2 жыл бұрын

@@seekhimwithallyourheartand3358 Oh, shut up 🙄

@scubaguy14 Жыл бұрын

@@jcobra09 jesus built my hotrod lol

@ColinWatters Жыл бұрын

The key to avoiding runs is to do lots of very thin light coats. The moment you try and spray a heavy coat you get runs.

@brettkuhn3224 Жыл бұрын

Awesome job on that for a DIY! I do mobile bodyshop work for a living and wanted to add two things: 1) you can get custom matched paint cans made for you at local paint shops. I get them for about $20 each when I need a color that I can’t easily make. They spray better and match better then Duplicolor. Larger cans too. 2). You can cut down on orange peel a huge amount amount by spraying the 2nd-last layer of clear much wetter, it’ll make the wet sand and polish process 10x easier. Most jobs don’t even need a polish when applied in that way. Great work and way to get out there and do stuff! Too much talk from most people.

@RavancheII 2 жыл бұрын

My Toyota Avalon is doing this same thing. It's a Desert Sand Mica, so it's a gold color basically. You did an excellent job on your project, I may have to try this on my own car now. Sure beats having the whole car painted. Most of the clear coat is gone from the hood and across the top of the rocker panels, the rest is pristine.

@mattsmomsmouth6175 3 жыл бұрын

Very helpful and informative! I’m going into this repair with confidence now. You’re an inspiration!

@monkeyjibeman 3 жыл бұрын

Like Adam said... Well done.. Perfect presentation and technique descriptions.. best video I've seen in a long time.. Have alot of clear coat issues and you've given me the confidence to proceed..thx

@neilreid2298 Жыл бұрын

I'm impressed! Just bought an '09 Camry with pretty heavy clear coat damage from the sun. Really appreciate you sharing your expertise!

@tarlus12 2 жыл бұрын

Of course it's a UA5 3.2TL, LOL. I'm convinced I have the only one in existence without failed clear coat. Excellent work, you knocked it out of the park!

@stealthg35infiniti94 3 жыл бұрын

Hektor, that's one of the best home DIY videos on paint restoration I've seen...Good common sense advice for rattle can spraying...Hermano, Please use some kind of respirator!

@HomieHektor 3 жыл бұрын

Stealth G35 Infiniti 👍🏼

@reedyg9182 3 жыл бұрын

That is outstanding nice work! Especially out of a rattle can

@pablobucello8233 11 күн бұрын

Good Work men ...I got the roof with same damage ..in a Mercedes 230 E old Year 92 ... Tank you for video .😊

@chrisg6091 2 жыл бұрын

Thank you so much for generously sharing this info, Hektor. It would have taken me endless trial and error for me to figure this out.👍

@johnmurphy4640 3 жыл бұрын

This was very helpful. I like how you showed each step and results.

@loua747 2 жыл бұрын

Love your videos bro. I'm about to spray paint my driver's side door and fender for the first time and this video definitely boosted my confidence

@1967davethewave Жыл бұрын

The problem is your repair looks better than the original finish next to it!!! Great job. I hadn't seen that clear coat product with the hardener in it before. It truly makes a spray can repair a real repair. thanks for the video.

@georgesever4347 2 жыл бұрын

Excellent honest results! Huge money savings. Accurate info on products used! Thank you! Nice video.

@chrisseanp6276 3 жыл бұрын

Great video. Love the presentation and your description is well detailed and delivered. Simplicity was key.

@darinp5612 3 жыл бұрын

Great video Hektor! I liked the step by step and the actual grit that you used. Have some clear coat failure on the roof of my civic, might actually try your method

@NoNameFish247 10 ай бұрын

I'm gonna do it! Thank you so much for giving me the confidence to knock it out on my own and practice a new skill! 🔥

@goldenbar3225 2 жыл бұрын

Note: Wear a respiratory mask when spraying paint and clearcoat to avoid respiratory damage! Otherwise great work, turned out nice.

@eduardoosorio5199 2 жыл бұрын

Any work mask but a painters mask would be best my opinion

@eduardoosorio5199 2 жыл бұрын

@@scrappy7509 paper mask is fine I don’t even use a mask people do graffiti and don’t use one 25 dollars for a painter’s mask if I had it laying around do what’s good with you you can also cover nose and mouth with a shirt held with one hand and other with spray can

@The1Music2MyEars 2 жыл бұрын

@@eduardoosorio5199 2k clear coats and spray paint are different in terms of toxicity. 2k contains isocyanates that is basically poison and your skin can even absorb it as well. Look it up. 2k is not to be messed with and if you sprayed 2k with no mask, you are bound to have long term damage down the road.

@eduardoosorio5199 2 жыл бұрын

@@The1Music2MyEars I’ve used it hundreds times without a mask I’m fine still feel same way still

@carlschnackel3051 3 жыл бұрын

Awesome job. You made it look so easy that I might tackle some of these jobs myself.

@powerplayreviews8082 3 жыл бұрын

Nice Damaged Clear Coat repair!! excellent work!!

@george6096 2 жыл бұрын

Great video thanks for sharing the knowledge! I'm gonna try this on my car sometime.I've got clear coat damage everywhere.I just spray painted over it all. It looks better than it did but this looks amazing.

@colbiesandberg7688 8 ай бұрын

Finally, a video showing what i need

@626bigben 3 жыл бұрын

Good job Hector . awesome job and thank you so much for those tips .much appreciated.

@thanosmichos8834 3 жыл бұрын

Great video, simple and understandable! Keep the good work, and continue this way hektor!

@johnsteiner8640 Жыл бұрын

One of the best, if not the best video on YT for car body paint repair! Thank!

@joannliddon 2 жыл бұрын

I really liked this video, you made it very easy to follow and your explanation of each process was spot on I can’t wait to your experience on my GMC Suburban. Thank you

@luckyadamsix 3 жыл бұрын

Great work! Looks amazing!

@94jimmy5 2 жыл бұрын

Very nice repair. Way cheaper than a body shop. Kudos.

@joelquaintance9025 2 жыл бұрын

Hektor, the problem with professionals is, that they always make the difficult look so easy. Thanks for sharing; great job.

@mundocpc Ай бұрын

This video is really useful for people looking to repair and maintain their daily old beater, a cheap second hand car or a track machine that will get scuffed all the time. At the end of the day, in many cases you only need something that is functional, protects the metal and looks quite good. If you paid little for a vehicle or it is very old you won't probably go to a body shop and spend a fortune there. Thanks! Oh, btw, please use a respirator! That clear coat is very toxic!

@fredrossi1334 Жыл бұрын

Great work with spray cans. Besides a respirator, I'd say use sanding blocks or pads. Very surprised that your heavy/close spray with the 2k worked as well as it did. Looks like the magic was in your prep and post sanding. Great video!

@Omarrr77 Жыл бұрын

Likewise! I was worries about the orange peel and waited until thr and and thought "oh no, this didn't work out". But he nailrd it A to Z with the detailed care on the sanding and polishing until it looked perfect. I used to apply this without wet sanding. I thought orange peel was a technique error. Perhaps, but it needs sanding in the end. This was great

@chriszzz6672 8 ай бұрын

Definitely use a respirator! You don't need the aerosols in your lungs.

@demented392rt5 7 ай бұрын

@@Omarrr77There will always be orange peel with rattle cans as there is not enough pressure in the cans. The good thing is that with a little elbow grease, cut and buff, the paint will look great. I did this to my 2015 Infiniti Q50 hood, bumper and fenders. No one can believe that i used rattle cans. Even my brother who helped me with the prep work. Also had a few friends who are painters were extremely impressed. Only paid 300 for the front end instead of 2300 like i was quoted. Use your paint code and have a local auto paint shop premix them. Exact match! Have fun

@freddybob807 5 ай бұрын

@@demented392rt5 Is that amount of buffing and polishing a must or does there exist any products which you can just spray on and get a nice clean finish?

@jonnieo4695 3 жыл бұрын

Awesome work brah, learning thank you

@kendemers8821 7 ай бұрын

Excellent instructional video. I"m going to try this on my 2004 Civic. Thanks!

@robertohoyos1734 Жыл бұрын

suuuper helpful homie! thank you! i got a 98 chevy cavalier that i'm restoring and def gonna use these tips.

@cruz_control3925 3 жыл бұрын

Big improvement! To avoid the sharp transition between the old paint and the new paint you can backmask and blend the base coat into about 3- 6 inches into the quarter panel. Good work keep it up!

@brannondoolin8654 3 жыл бұрын

Been learning a lot recently and just learned ab back masking and I was gonna say the exact same thing lol.

@willg.7775 2 жыл бұрын

Backmask?

@GreenWitch1 2 жыл бұрын

What is back masking?

@sodaomgi7233 10 ай бұрын

Yes, what is it? Explain please.

@svelasquez1212 3 жыл бұрын

Hey brother looks awesome what is the time frame from start to finish on this project? I’m interested in doing my hood roof and trunk. Thanks 🙏🏼

@briandady9030 2 ай бұрын

Great video! Good points on technique and materials... thanks for posting.

@MayweatherjrWONandsoTrump 10 ай бұрын

Useful content and links to materials. My time was well spent online while watching you great work. Thanks you 😊

@marvingmarving4405 3 жыл бұрын

this was really helpful.

@Kwarkiemodo Жыл бұрын

Just wow! Nice tutorial! Thanks for the video!!

@davidlivingston6888 9 ай бұрын

Outstanding video. Thanks, Hector!

@zamixoffroad 3 жыл бұрын

Simple job, perfect mind.. 👌🏻👍🏼

@wisecampmotorcycles8258 3 жыл бұрын

Awesome job Homie ! I learnt something today. 👍

@chaun7277 Жыл бұрын

Love your video, its so easy to understand. The result looks awesome !!

@danielram6782 2 жыл бұрын

mechanical, electrical, and body. Damn you are bad ass, I truly admire your work ethic.

@proudankle8381 3 жыл бұрын

Wow. That’s pretty amazing work. Wish all the “kids” in my town would watch this before they spray paint their cars. Lol. I had no idea you could get results like that. Great job.

@cyounger99 3 жыл бұрын

Great video and nice result. I appreciate your honesty about the color match...not perfect but really improved and functional.

@elmerurena480 3 жыл бұрын

Painting is too dangerous with out PPE equipment take. Care yourselp

@kyleleach997 2 жыл бұрын

Amazing Hektor! And you make it easy to understand and follow. Thank you, sir.

@sedition4267 Жыл бұрын

EXACTLY what I was looking for. Nice job!

@PCPAyLOAD 3 жыл бұрын

Thanks for going into so much detail. Have a small clear-coat peeling area on my grand cherokee rear hatch. Going to try your method.

@ap8057 Жыл бұрын

Tried to recreate your results and failed miserably. Definitely respect what you were able to do here especially on black paint!

@HappieFaith 2 жыл бұрын

Being able to use just off-the-shelf spray cans for a good finish like this is a true skill!

@rainraizo 7 ай бұрын

Thanks for the simple, clean & easy to understand tutorial bro, keep it up 👍👍

@MrJrocc09 3 жыл бұрын

Mad skills fam thanks for the tips

@Garth2011 3 жыл бұрын

Best to remove the door handle and belt moldings vs. tape them off. Why? The clear/color coat will lift where the frog tape met with the molding as there is no surface prep to hold it. Otherwise, this is a great alternative to professional body shop methods which simply revert to complete paint of doors. One alternative to the rattle can color coat. Get a pint of color matched paint from a local automotive paint shop. Heavy on the clear so it doesn't do this again. Looks better than it did and thats the important part.

@jamesbanner9123 Жыл бұрын

Great job! I need to do my 2012 Chevy Cruze, you made it look easy, thank you.

@rickl6697 2 жыл бұрын

Wow, great job. Thanks so much for posting this.

@bobbymoss6160 9 ай бұрын

Bro, you're flipping crazy doing all that spraying w/o any breathing protection apparatus.

@searay260sundeckforsale4 24 күн бұрын

Especially the clear coat - that things is dangerous for lungs

@kampammam 11 күн бұрын

What breathing level do you suggest?

@joeywaldrop2825 9 ай бұрын

You got a great finish for a diy project! Looks great! There are 2 reasons that your duplicator is lighter, you need more coats of it to get true coverage with that stuff and you need dark paint behind it because the car is dark. The light colored primer behind it makes the paint appear lighter

@dansalzmann7153 8 ай бұрын

I just ran across this. Props to you, that's some beautiful work for just rattle cans. You've got skillz bro!

@Libertas_Primus 10 ай бұрын

This is a great video with good info for novice or beginners!!!! Love your videos Homie!!!

@mirkovickovic7059 3 жыл бұрын

Man you did really good job, par excellence

@paulstoolbox 3 жыл бұрын

Man that is beautiful work Hektor, thanks for sharing!

@danielacker7085 2 жыл бұрын

Great video!

@seekhimwithallyourheartand3358 2 жыл бұрын

@user-sv6bu8ek8z 2 жыл бұрын

Thank you so much, that spot job was on point the way you explained it was so easy to fallow. Thanks again and keep it up.

@jjwalker2011 9 ай бұрын

Killa bro you definitely talented. Keep kicking ass!

@MartinHernandez-qv4vc 3 жыл бұрын

Very nice great job, most affordable and you did a wonderful job explaining and to the point

@markheckman3987 3 жыл бұрын

Great job, Thanks Eric O. South main auto

@warrenallen2738 2 жыл бұрын

Wow looking prefect job and thanks for sharing in how to do it, I never knew it that can work.

@kimshannon6408 10 ай бұрын

Wow awesome video! I am looking for a little cheap car to buy and alot of them have paint defects like what you've shown. You have given me a burst of confidence to purchase one with defects and turn it into something beautiful. Good job Homie Hektor!

@vinces8974 3 жыл бұрын

That’s really great work

@DjXCENTRiC 3 жыл бұрын

Let's just activate the clear coat on the door panel so we can dent it when we have cement on the floor lmao

@mrlilpapasmurf1009 3 жыл бұрын

Lmfao

@georgetorrez8519 3 жыл бұрын

That's hilarious 😂

@elmueka77 3 жыл бұрын

Lmaoooo

@bpy4073 2 жыл бұрын

That was crazy.

@Sahadi420 2 жыл бұрын

instantly went to the comments when I saw that....LOL

@chikombechela2460 2 жыл бұрын

Ummm great work man!!! 👏 definitely saving this up on my DIY list.

@diehardfan173 3 жыл бұрын

I can see your confidence in every sanding stroke. Nice job!

@IdEk5627 3 жыл бұрын

Next time just check how many coats u need to put on for the base. Als the primer color matters as well. Some colors call for black primer because it will end up tinting the base color.

@1965Karmann Жыл бұрын

Great video Hektor. Gives me hope that I can bring back the shine on my blue Audi A4 convertible without the expense of taking to a shop. Keep up the good work!

@budblack3588 Жыл бұрын

wow! I am impressed! great job, I learned a lot today thanks to you!

@davidbautista8572 3 жыл бұрын

12:00 Homie Hektor 'Making The American Flag Look Great Again' this is going viral for sure!!!

@SouthMainAuto 3 жыл бұрын

Homie Hektor 2020

@1955porsche 3 жыл бұрын

right on

@meowme7644 3 жыл бұрын

The american Flag is great and will stay so!

@johnnypalacios9920 3 жыл бұрын

Lol!

@johnnypalacios9920 3 жыл бұрын

Homie Hektor for president!!! Viva lavraza cabronies!!! 😄 lol

@integrity262 Жыл бұрын

Skills that one can’t put a price on!Thank you for sharing your knowledge!

@brienmcmanus6354 Ай бұрын

Best explanation I have found thank you Hector

@Jonas_Fox Жыл бұрын

Stellar work. Thanks for the demonstration brutha

@lucifarian93 3 жыл бұрын

no gloves no mask! look after yourself for all our sakes. From UK , appreciate the video, it's all about technique and precision, keep your brain and your skin. Cheers.

15:55

How to Repair Damaged Clear Coat - Auto Body Repair Hacks Revealed

Ratchets And Wrenches

Рет қаралды 6 МЛН