*This* is how you do a "how to" video. He perfectly explains how to do it, the tools, the before and after. Great job Late Model Tech!

I used a silicone dough scraper/bowl scraper to remove the glue without chance of scratching - glue came off in one shot every-time. Thank you for giving me the confidence to remove my fridge dents. Great video

Nice! Thank you. Not sure what 26 people saw to give this a thumbs down. People are unbelievable. Home Depot dented our door and Samsung let us keep the frig and refunded us 95% of our purchase price because they can't provide a new door for months. This kit should do it!

Thanks for the video! I put a nice 3 inch long crease in my fridge and managed to fix it with this kit.

THANK YOU! This was so easy to fix dents that have been an eyesore for me for years! I couldn’t have done it without your instruction and confidence

Nice Job!!! I watched another guy on the internet do that to his stainless steel frig and the the part of his dent tool that rests against the refrigerator (not the glued part) made the dent much much worse. I don't have any dents in mine, but I know that panel is over $300.00. That whole paintless dent removal is a bit of an art. I watched a guy do it on a black car with a dent worse than yours and he got it out 100% and black really shows dings. Took him like an hour. One time I set a front door on it side and really dinged up the door knob from the weight (don't ever do that). That know by itself was not available any more. I took a small drill and drilled a hold in the neck of the know where you rally can't see it and pushed 90 percent of the dent out with a nail clamped in a Vicegrips. Since the know was an antique brass and old and rough and not shiny it was a good repair. Again, really nice video!!

Thanks so much for this! Just moved into our house a few months ago and already dinged up the new fridge 🙄 Bought a similar kit and hopefully am able to do as well as you did!

Dude, this was a really good video. It was very informative. I have a Samsung refrigerator myself that I just ordered a repair kit for. Your video showed me exactly what I needed to know to repair mine. Thank You

I have three tiny dents in my brand new frig....I just ordered the kit....and I’m going to try it on my metal front door too...why not. Thanks for the video.

Wow! I'm super impressed! Excellent tutorial! Thank you so much! I need a new fridge, but the prices with this inflation is making buying a new fridge a real problem. I refuse to use a credit card and go into debt. I found a company with new fridges with scratch and dents, but thought wow, now I have to look at a dent(s). But now, I have hope! I think I can find a new fridge, with dent(s) that I can actually easily repair with good results. I think the key is look for soft dents, like you had, and avoid the dents with metal creased edges or puncture shapes - those have too much metal damage to pull out smooth. Thanks again!

Kudos to you, Donny! Great video, very informative. Confirmed my suspicion that the "stainless steel" on these fridge doors is not much thicker than aluminum foil, so caution is a must lest you make the blemish worse. Thank you!

Looks great. But I think I'm going to put some hand embroidery on a magnet and call it done. Thanks for the great video.

Outstanding video! I just discovered a pea size dent on my 2 month old frig and came straight to KZfaq to find an expert. BINGO!!!🎉. 🤩

I picked up this kit to try and remove a few dents from the door of the subzero refrigerator, and this thing will not budge the dents in the door. I have to assume there are some different materials or construction over the Samsung. In fact, the plastic pieces that you glue to the door wind up, popping off from the glue and there is still zero improvement. I let the glue set for 8 to 10 minutes before trying to pull

Just bought a dinged fridge. 1/2 off i am definately trying this so awesome. Need it for my car too

Look forward to trying this on my brand new LG washer with a shallow but big round dent

Thank you, thank you! I had some workers dent our brand new fridge and we've tried and bought multiple "dent" fixes but hadn't seen this one. Thanks!

Great video. Thanks for breaking down the steps clearly!

Good instruction. Unfortunately this just did not work for me. Tried about 20 times, various size/shape bits, Tried working it slowly like in the video, tried pulling quick to the point the glue seal broke. Just not getting anywhere.

Thanks for the vide. At 5:10 you don't squeeze the trigger all the way. In other videos, people squeeze it all the way and the glue comes off of the refrigerator. Would you explain which one you recommend and why?

How do you fix a dented corner of the door?

Great video, I bought the tool but am having some major issues with both of the glue sticks actually sticking to the fridge surface. It pulls off way too easy regardless of which one I use. Any thoughts or tips?

Can you do this on the white painted ge cafe refrigerator, or will it take off the paint from the glue?

Came in clutch here bro. Thank you.

Great video! Thanks.

Love this video ❤❤❤thanks

Does your fridge have the fingerprint resistant coating? I’m wondering if the glue will damage mine.

Well done! Thank you for the step by step!

Excellent video - Super helpful! Thank you so much - Will order this kit and hopefully I'll be able to fix my refrigerator the same way

Will the alcohol spray damage the surface?

Awesome video man, I have two annoying dings on my passenger side door and I’ve been thinking about getting one of these. Problem is my doors aren’t perfectly flat like your refrigerator here. Would this work on a semi curved surface like a door panel?

Can you tell me please how you to determine how much 'pull' pressure to reach by squeezing the mechanism? Is it best to go with real light pressure, remove the pad attachment, examine, and then re-attempt if necessary? Can the attachment tips be reused? Also, before you use soft hammer the smooth the surface, can you use a compact/small leveler to determine how level it is? Your method seems to work better than the hair dryer followed by dry ice or upside-down compressed air I have seen in other YT videos. Did you try that beforehand? Would this other technique work (or be sensible to attempt) once the dent is reduced to minimize it more easily than with the clamp method you used?

Good stuff brother!!! Just what I needed

Ordered the kit and will use your video to remove the dent! Thank you

On another video someone did the same thing and said the plastic scraper made some scratches on the steel. Did this happen to you too? The dent in my gar range is right next to the edge, do you think this would work there? Thanks

Dang. I have the quad door, but the panels look like their spun aluminum or something, because it isn’t magnetic. I haven’t looked, but I wonder if there’s a suction cup version instead of the magnet mount.

Thank you very much for this video

I’m searching this up because I punched my stainless steel fridge 🤦‍♂️

Hola saludos desde México tengo una pregunta solo funciona con Rrfrigerador de acero inoxidable o con cual quier refrigerador

Will this get rid of small dents on a microwave?

Congrats so a great job!!!! Where can buy this kit???

Thank you so much this was very helpful. Any further tips on choosing the right size adapter? If I choose one that’s not right could it make things worse?

Think this would work for those thin sheet metal exterior doors on apartments? I have so dents in one and don't want to replace it

So the old style traditional white good - when it gets SCRATCHES OR DENTS it is not seen much.

How about fine scratches on stainless steel appliances ??

Hey man, very inspirational. Did the hot glue mess up the panel at all? Have a dent in mine too, just a little scared to use that kit.

Thank you Brother, very helpful.

Awesome video! Thank you!

Can I use ordinary glue stick?

Very nice helpful video. Awesome job, man! Much appreciated.

If I created a high point and can’t know it down, can I make it into a dent again to repeat the process

Looks great I have one to get out of my fridge

Exactly what I needed thank you for the video!

Great work!! Thank you for posting the video “

this helped me a bunch

How's the finish after spraying it with alcohol?

Great video. Thank you. Can u give me the link to this exact repair kit. I would like to order the same one you are using

👏 great video!

thanks. Will be buying.

Bravo buddy, this is a great how to!

Thank you

Rubbing alcoholic cab ruin some metal finishes. So be careful. Appliances also have clear coatings that can be damaged by the hot glue and or rubbing alcohol

Very nice result!

You could be Markiplier's twin lol

Dang I went to buy It but It was out of stock. So I bought a second version that doesn't have the second tool for pulling bigger dents.

NO bag and fewer knock down tools (no orange/red adapter for the knock down tools) on the Amazon package as of April 2022

Thanks...nice vid

Any idea if this will work on black stainless? I’m reading a lot of comments about glue not sticking so I’m wondering if anyones ever tried this on a black stainless item.

Thanks from Maui!!! You saved me!!!! Aloha Don't shit in their bathroom

Can you tell me the brand name of the kit please

Exactly the vid I was looking for thanks

The glue doesn’t stick well for me. Soon as I start to pull it pops straight off????

I got the same kit after watching this video and BS! I tried 5X to glue it to my stainless steel refrigerator and one small pull and it comes right off. Not sure what glue your using but its not from this kit.

How well would this work on a white whirlpool. Have a crease about 8 inches long

Way cool man

the glue gun glue won't stick to the peuter type stainless steel on my dometic caravan fridge.

would this work on a regular white fridge?

Which kit did you purchase?

I tried to do this but glue keeps detaching from refrigerator door, any suggestions?

😢Thanks Donny, I have an expensive LG Fridge that looks like someone took to it with a ball peen hammer. So disgusting. And so annoyed with LG for using Chinese cheap ass stainless steel. Anyway can't wait to fix my fridge with this kit. Thanks.

There are 2 kits linked, which one did you use?

cool

I just bought a $2000 fridge. Come home and the missus has put 2 very noticeable dents in the door by letting the door open 180 degrees onto an adjacent door. 😔

Great job, excellent tutorial and video. Fantastic outcome

I tried but had no success your fridge must have thinner stainless

Think this would work on a stainless steel grill cover?

Generally, Stainless Steel (SS) appliances cannot be easily dented unless you knocked it real hard. By deign that it cannot be easily dented, it also cannot be easily repaired. A comparison of the SS thermos flask vs the aluminum coke can and you get the idea. Many fridges nowadays may look like SS but are in fact metallic vinyl layer. The "creases" or "dents" on the vinyl layer cannot be fixed satisfactorily with the PDR kit. It may be possible for the PDR to reposition the warped area, giving the impression that it has been repaired. For a permanent repair, the entire vinyl could be replaced. As for real SS appliances, I doubt it could be fixed with PDR kits which are primarily designed for aluminum that is a far softer metal. Normally SS dents could only be repaired using TIG welding and I had seen this done by a professional. There are of course, many other considerations such as material/thickness of the shell and the substrate below it (e.g. fridge could be using a vinyl layer to simulate SS and the door material beneath could be aluminum, iron or plastic). My point is there is really no "one-size fit-all" solution.

Let me know if you ever come to Florida. 😁🏖Trying to find someone to fix a clients refrigerator. 1 stupid small dent, hours of problems to deal with. 🙄

I would suggest that the rubbing alcohol did nothing to help remove the puller.

My Samsung refrigerator is less then 5mths old and already has a dent

Can you remove it in the curved area??

Wts the price of kit

What about the side where it's not stainless steel and it's a whole line?

Nice job but my problem is scratch is any one know something?

I just accidentally dented my family’s fridge. This should save my ass! Thank you!

Great vid! How much for this kit and is there a time frame for when the dents occur as to when you can fix them and they become “permanent “? What is the link for this kit?

What is the name of the kit

Same kit bought a different knock down tool set that works better

I was so fucking careful with that fridge but they left some holes in the wrapping 😬 anyway thanks

It’s paintless. Paintless dent removal