Rancho Control Arm Geometry Correction Brackets Installation and Review Jeep Wrangler Jk jl

Рет қаралды 32,049

6 жыл бұрын

Control Arm Brackets
JKS JKS6200 Control Arm Correction Bracket
amzn.to/2JdkdBT
Rough Country - 110600 - Front Control Arm Drop/Relocation Kit
amzn.to/2LrWjiz
Rancho Non adjustable brackets amzn.to/2tAjP80
Rancho Adjustable brackets amzn.to/2ufUJJ2
The Tools and Products I Recommend and Use www.amazon.com/shop/thelatemo...
Heard these brackets could improve the Ride Quality so I decided to try them.
Thanks For Watching and Please Subscribe kzfaq.info_c...
Facebook: / thelatemodeltech
InstaGram: / thelatemodeltech2.0
Pinterest: / thelatemodeltech
Twitter: / late_tech

Пікірлер: 58

@TrueNomadSkies 5 жыл бұрын

Really nice to see you record the install in real time instead of in 30 second cuts.

@MoragTong_ 3 жыл бұрын

To anyone watching this. DO NOT take off the tires...that's why his axle moved. Makes it a PITA to get the arms lined up again. Also there is no need to completely remove the upper control arm. Just unbolt the upper and lower arms from the frame and loosen them at the axle...they will drop down and you will be able to install the bracket. PRO TIP...do one side at a time and your suspension won't move a micron. This whole process(both sides) should take you less than 30 min total with air or cordless tools.

@ivanmontes6758 3 жыл бұрын

Do you know why my traction control and esp bas light came on after installing the brackets?

@Strikerage 3 жыл бұрын

@@ivanmontes6758 The computer is finicky when you mess with the suspension. I don't know how I did it, but you can shut that off if needed.

@gunztommiegunz Ай бұрын

@@ivanmontes6758alignment you know by now 😂

@paulisadora 3 жыл бұрын

This is exactly what I needed to see today. Just ordered the brackets this morning after the tire shop said there was a caster issue after installation of the lift.

@truckinfool4 2 жыл бұрын

One of the best detailed videos on this so far

@stevel.1554 6 жыл бұрын

Nice tutorial. Just bought a 2016 Sahara that needs these badly.

@austincableguy 3 жыл бұрын

Awesome video, looking at these for my daily driver on 3.5" lift. Thanks and Gig'Em!!!

@BubbasgarageTv 5 жыл бұрын

Great video brother. Gig'Em! Whoop!

@richardmckinley3236 Жыл бұрын

Very helpful. Thanks for posting this!

@CTarna2 6 жыл бұрын

Nice job. Thanks!

@dmwil1 2 жыл бұрын

Nice video! I'm installing a set on my JK and another on my JL. This was very helpful!

@asiasi8610 4 ай бұрын

Hello . Is the brackets fit for JK and JL?

@ENERO33 3 жыл бұрын

YES THEY DO WORK...! BUY THEM, THEY ARE WORTH IT.

@eric123120 5 жыл бұрын

Thanks for the video

@haroldbrown3452 5 жыл бұрын

great video , thanks for the install

@Donnythelatemodeltech 5 жыл бұрын

Thanks for the great comment.

@johnhowzeiv1856 4 жыл бұрын

Great vid

@shottown911 2 жыл бұрын

Thank brother! I'll be getting some.

@Donnythelatemodeltech 2 жыл бұрын

Not my best video 😅 glad you made it through it!

@thedeathwobblechannel6539 5 жыл бұрын

nice vid !

5 жыл бұрын

Subbed bro

@231mac 6 жыл бұрын

How does your front drive shaft angle look at the rzeppa joint? Did it make it much worse? And what size lift are you running? Thanks, man

@GoRanchoSuspension 4 жыл бұрын

Great video!!!

@Donnythelatemodeltech 4 жыл бұрын

Mucho welcome!

@Donnythelatemodeltech 4 жыл бұрын

Send me some products!!!!!

@taylorcampbell985 5 жыл бұрын

Hey man what size lift do you have ? I see you had teraflex lower control arms on top of adding this.

@mscappa 4 жыл бұрын

Great step by step. Would you recommend this bracket over just getting longer arms? And was it necessary to fully remove the top arm?

@Donnythelatemodeltech 4 жыл бұрын

Much cheaper than arms,,, this jeep is 98% on the road so.... gotta save the cash.

@joncruz 2 жыл бұрын

What was your caster and what hold did I you used? How many inches lift? Thanks

@mikesters3532 3 жыл бұрын

Need to use a torque wrench and torque the bolts properly.

@ThePunisher123pXxbox 4 жыл бұрын

Hey man do you remember what size the outer lower control arm bolt is? It’s the one the is located inside the axle

@ThePunisher123pXxbox 4 жыл бұрын

It’s actually on the upper control arm frame size*

@ryanmarek6324 6 жыл бұрын

Did you have to put her up on jack stands or where you able to do this with the Jeep still on the ground? And we’re coils removed?

@Donnythelatemodeltech 6 жыл бұрын

jack stands is a must, coils not removed.

@matthewsipe8905 4 жыл бұрын

U dont need to jack it up..you can do it on the ground, tires on..

@brooklynmonster730 5 жыл бұрын

I see three sets of holes on the backets do the instructions tell u what hole to use

@Donnythelatemodeltech 5 жыл бұрын

Sure dont.

@z33guru 3 жыл бұрын

They do now

@petraschubnel8334 2 жыл бұрын

You try to give the video more brightness it will be great if you do

@Donnythelatemodeltech 2 жыл бұрын

👍

@Not_Sure_2505 3 жыл бұрын

Do you have bump stop extensions installed? I want to get these, have a 4" lift as well but no extensions

@Donnythelatemodeltech 3 жыл бұрын

This is what I used up front amzn.to/3pLAs9X

@Donnythelatemodeltech 3 жыл бұрын

This in the rear amzn.to/2NGWAVq

@Not_Sure_2505 3 жыл бұрын

Thanks! I'm going to put the brackets in for now, I'll upgrade the stops when they come in at a later date

@bradenduke2071 5 жыл бұрын

How tall is your lift? I saw you used these along with the TeraFlex arms and I know they already correct for 2-3” lifts and was wondering what size lift you have.

@Donnythelatemodeltech 5 жыл бұрын

@Chapacabra23 Жыл бұрын

Are these just for the front? Not too familiar with suspension.

@Donnythelatemodeltech Жыл бұрын

Yes

@Sniperssx 3 жыл бұрын

is that bracket level the car as well?

@Donnythelatemodeltech 3 жыл бұрын

Doesn't affect height.

@Sniperssx 3 жыл бұрын

@@Donnythelatemodeltech so where I can find the bushing arms I need to replace mind but the thins is all arms has been sitch from stock to another arms which don't what type pf arms old owner was replaced