Fix a Fuel Tap Shut Off Valve- Don't Replace It

No video

Fix a Fuel Tap Shut Off Valve- Don't Replace It

Рет қаралды 10,604

Күн бұрын

Rebuild that leaky or frozen fuel tap shut off valve or petcock. No need to replace the entire fuel tap. The internal grommets and gaskets are common across many small engines for generators, go-karts, mini-bikes, scooters, mopeds and other small engines.
The tools I like and use most often:
Magnetic spark plug socket set: amzn.to/3CzmpvO
Tachometer: amzn.to/3sHibiH
Vessel Megadora JIS screwdriver set: amzn.to/363RFqO
Channellock Bent Needle-nose pliers: amzn.to/3I5DbnA
Long 1/4 Quick-connect Torx Driver Bits: amzn.to/3HUNgnm
Spark Tester: amzn.to/3CxW2qi
OTC Leak-down Test Kit: amzn.to/3CyUhJn
Compression Tester: amzn.to/3IWd6sp
Wear your safety glasses, or you'll put your eye out. Try on some gloves. Take off that spark plug boot. Clean your room. Open the windows, those fumes are nasty. Just 'cause I do it, don't think it's the end all, be all solution. There's plenty more ideas out there, I can't take responsibility if you slice off a few fingers after watching my videos. And don't just pour that toxic stuff down the sewer or in the ditch, dispose of waste responsibly. Just be safe, OK?
Follow along with me elsewhere:
/ thelawnmowerlady
the-lawnmower-...
Titles, opening graphics, and music by AbleVFX.
Any links to products are likely affiliate links, and I may earn a small commission from qualifying purchases (Thank You!), with no additional costs to you.
Disclaimer: The content of this video is purely for my entertainment, and is available to you for informational and educational purposes only. It's not substitute advice from small engine mechanics with professional training and certifications, nor does it create any kind of relationship between the The Lawnmower Lady and you. Your situation may be different, and the The Lawnmower Lady makes no warranties, express or implied, as to the fit, accuracy, or applicability of the information shown in this video, and implies no guarantee of results. The Lawnmower Lady and any sponsors of this video are not liable for any damages of personal injury, property damage or loss of any kind that may result from the use or reliance on this video and/or any parts and procedures represented in this video. You are using the information presented in this video solely at your own risk.
#petcock #fueltap #lawnmower #smallenginerepair #DIY

Пікірлер: 95

@TheLawnmowerLady 2 жыл бұрын

If this video helped you, please consider clicking on the THANKS button above 🙌 Check out these other cool tools and quick tips: kzfaq.info/sun/PLscwXOlCLzlyTEFVZeMEQh3GmfA3cIeoH

@themowerman 2 жыл бұрын

Good job Stella.. thanks for the video

@TheLawnmowerLady 2 жыл бұрын

Thanks for watching Sir Mick! Cheers!

@markwiley9516 2 жыл бұрын

Good video miss Stella love seeing you in the workshop

@TheLawnmowerLady 2 жыл бұрын

Thank you for watching Mr Mark!

@HobbyMotorDK 2 жыл бұрын

Spot on Stella - as always I feel like I'm in class and learning from the best shop teacher. Thanks

@TheLawnmowerLady 2 жыл бұрын

Wow, thank you Claus!

@georgemyers6518 2 жыл бұрын

Great video as always. That was the first time I’ve ever seen one of those apart. You explained it in a way that makes it easy to understand. Please keep the videos coming

@TheLawnmowerLady 2 жыл бұрын

Thanks Mr George 👍 I appreciate you watching!

@almclean4835 2 жыл бұрын

Nice tips, Miss Stella. Never opened a fuel tap before, had no real idea what was inside

@TheLawnmowerLady 2 жыл бұрын

Thanks for watching Mr Al !

@nashguy207 2 жыл бұрын

Very good informative video Stella. This should help anyone needing to know how to do this. I think this is the first video I have seen showing how to repair one of these. Cheers!!

@TheLawnmowerLady 2 жыл бұрын

I appreciate that Mr Bob!

@catchacow1927 2 жыл бұрын

Great Video Stella, thank you for sharing 👍🏻

@TheLawnmowerLady 2 жыл бұрын

My pleasure 😊

@pnwRC. 2 жыл бұрын

NEAT video! This'll save me a trip tp the local small engine repair shop with the ole rider mower. I was dreading loading & unloading that thing!

@TheLawnmowerLady 2 жыл бұрын

Glad I could help 👍

@Turningwrenches85 2 жыл бұрын

Well I now have info on how to rebuild these petcocks and how to check out those grommets for any kind of torns or rips if I come across any like that.. good video Stella 🔧

@TheLawnmowerLady 2 жыл бұрын

Thanks for watching Mr John!

@thebestfamily669 2 жыл бұрын

Went and did a great job following your advice on a stuck Honda petrol mower it was left for a year and the grommet was ripped from trying to turn the tap

@TheLawnmowerLady 2 жыл бұрын

I hope you can find a new grommet! Thanks for watching Mr VInce!

@andersforrad 2 жыл бұрын

Nice one Stella! Always good angels with the camera. Cheers!

@TheLawnmowerLady 2 жыл бұрын

Thank you Mr Anders! Cheers!

@Inisfad 2 жыл бұрын

The shut off valve on my moped is at the bottom of the tank, kind of like what’s shown at 0:029 for the generator. In order for me to do this repair, I assume I’d have to purge the tank of fuel before I would be able to disassemble the tap. I did have a leak in mine earlier in the season. The small plastic hose that connects the tap to the fuel line has a lip on it, presumably to stop the fuel from leaking. I was able to put a tiny o ring on to that lip and tighten all down, which stopped the leak. I’ve never seen a repair of the actual tap itself, so this is great to know. Thanks for the instruction.

@TheLawnmowerLady 2 жыл бұрын

Thanks for watching Ms Inisfad! Sounds like you took care of your leak with that o-ring. Signs of internal problems could be things like fuel leaking from the carb overflow ports when the fuel tap is off, indicating the internal grommet is damaged and allowing fuel to pass on to the carb, despite the tap being in the off position. Another problem caused by damaged grommets is restricted fuel flow, more of a concern however, on 2-strokers. Yes, you would need t drain the tank before trying to replace that grommet. That said, sounds to me the internals are OK on yours? I like the saying "If it ain't broke, don't fix it" 🙂 Cheers!

@Inisfad 2 жыл бұрын

@@TheLawnmowerLady I prefer….’If it ain’t broke, you’re not trying hard enough’…..lol

@jerryschneider145 2 жыл бұрын

Thank you for that so much. I have that exact problem with a Honda generator. I will see if I can now get in there and fix it.

@TheLawnmowerLady 2 жыл бұрын

Good luck Mr Jerry! Thanks for watching!

@baldeagle242 2 жыл бұрын

Another great video young lady. 😁👍

@TheLawnmowerLady 2 жыл бұрын

Thank you Mr Eagle ! 😁

@GuysPlayingWithTools 2 жыл бұрын

I do that all the time, good video!

@TheLawnmowerLady 2 жыл бұрын

Thanks for watching !

@Big_Johns 2 жыл бұрын

Very nice video Ms Stella and I wanted you to know you're the first to be viewed on my brand new 32" curved hi-def monitor..... you looked great!! :)

@TheLawnmowerLady 2 жыл бұрын

Thanks Mr John! I guess I'll have to work on my coiffure since I'm now hi-def 😂

@Big_Johns 2 жыл бұрын

Nooooo, it looks just fine like it is!! 🤣🤣

@haneyoakie14 2 жыл бұрын

Nice explanation and very useful information. Thank you Lawnmower Lady!!

@TheLawnmowerLady 2 жыл бұрын

Glad it was helpful Mr Haney! Cheers!

@Big_Johns 2 жыл бұрын

Would that be a Green Acres reference?? :)

@plumkey197 Жыл бұрын

Could you provide a source for the replacement grommet as well as the filter sock for common petcocks? I love your channel and just subscribed. you're like a breath of fresh air with your no-nonsense tutorials. Thanks for what you do! Greetings from South Louisiana!

@TheLawnmowerLady Жыл бұрын

Thank you, I appreciate you watching! I suggest checking out motorcycle or moped shops. I've not seen a replacement fuel filter screen, but doesn't mean it's not out there. Hope this helps. Cheers!

@plumkey197 Жыл бұрын

@@TheLawnmowerLady Thank you for your super-fast reply! I look forward to binge-watching your content during the next two weekends. Thanks again and have a blessed day! Keith Nettles. RN

@BrucesShop 2 жыл бұрын

Thanks Stella. I am always looking for lubricants that are used for moveable fuel valve internals.

@TheLawnmowerLady 2 жыл бұрын

I'm just guessing that lube will work OK. I wanted to avoid anything petroleum based, and didn't want anything water based. I hope my theory on that synthetic lube holds water (or maybe not, LOL). Thanks for watching, and your support. 😘

@INSIDEHOUSEGARAGE 2 жыл бұрын

very informative. thanks for the video

@TheLawnmowerLady 2 жыл бұрын

Thanks Mr IHG. Cheers!

@freemandavy9868 2 жыл бұрын

Very good teaching 👍👍

@TheLawnmowerLady 2 жыл бұрын

Thank you Mr Freeman! 😃

@LNRRidez 2 жыл бұрын

Absolutely nothing wrong with rebuilding something. So many are quick to replace items. I'll be dropping some stuff in the mail Monday or Tuesday for you!!!

@TheLawnmowerLady 2 жыл бұрын

I agree Mr Ken! I'll keep an eye out for the mail. Cheers!

@hickorystx 2 жыл бұрын

Nicely done!!! Good filming, editing, audio and great explanation while doing the repair!!! Thank you for the tip and time put in to this video... ✨

@TheLawnmowerLady 2 жыл бұрын

Thanks Mr G! 👍I appreciate you watching. Cheers!

@RaysLaughsAndLyrics 2 жыл бұрын

👍Another great vid on a common barrier to starting up a neglected fuel powered toy or tool. Hope You had a well deserved rest and reunion with friends and family over Thanksgiving. Wishing You and Yours good health and long life..

@TheLawnmowerLady 2 жыл бұрын

Thanks Mr Ray! Always nice to see family and friends during a holiday. Cheers!

@mr1pearl 2 жыл бұрын

Very helpful tip thank you much !

@TheLawnmowerLady 2 жыл бұрын

Thank you Mr Bill !

@MachineryNation 2 жыл бұрын

Great Vid Stella. Thank you for sharing your wisdom, really awesome info 🤩

@TheLawnmowerLady 2 жыл бұрын

Thanks for watching Mr James! Cheers! 😘

@edwardburke9181 2 жыл бұрын

Nice tip stella as usual

@TheLawnmowerLady 2 жыл бұрын

Glad you think so Mr Edward! Cheers!

@edwardburke9181 2 жыл бұрын

@@TheLawnmowerLady hey Frank oh your not Frank your the lawnmower lady .your videos are great stella.. I love em they're clear and concise

@TheRustyRooster 2 жыл бұрын

Very useful info BUZZ. Have you found an assortment of those grommets anywhere? I have a couple grommets but it seem i never have the right size.

@TheLawnmowerLady 2 жыл бұрын

Thank you Mr Rooster! I do have to spend some time hunting the correct ones. If I recall, i actually went to my local Suzuki motorcycle shop for that little one. The complete fuel tap was obsolete, but the innards were available (I'm guessing since they would use them in multiple bikes over many years) I've had the best luck at independent scooter and moped shops. It's a crap shoot for sure on getting one that fits, but often cheaper in the long run. Thanks for watching! 😘

@anfieldroadlayoutintheloft5204 2 жыл бұрын

good vid keep up the good vid on your channel thaks lee

@TheLawnmowerLady 2 жыл бұрын

Thanks Mr Lee! 👍

@edwardburke9181 2 жыл бұрын

I can't find your email on your about page Lee just comes up invalid email

@user-jz6dc3kn4x Жыл бұрын

I have one of those Gou Ying fuel valves on a generator that's leaking. I might just drill out the rivets, drill through and use small bolts to put it back together. I have done rubber gasket paper and can fashion a new seal for it. I know they're cheap, but if I get a new one, it's liable to do the same thing. Mine wasn't frozen or old (less than 1-year). It might just be defective. I'm assuming when I get it open, there will be metal slag on it from casting. We'll see how it goes. 😉👉

@TheLawnmowerLady Жыл бұрын

I would be curious to see if it’s damaged inside. I’ve had those imported ones break apart in my hands. Cheap casting, and awful pot metal. I hope you get it running. Thanks for watching!

@garyclifton2180 2 жыл бұрын

Nice to see something different Stella x have you worked on a injection motorscooter ?

@TheLawnmowerLady 2 жыл бұрын

Actually yes Mr Gary. I have a 2013 Vespa GTS 300. It uses the Magneti Marelli MIU ECU. I have have the software to read and clear codes, but not fuel mapping. The newer models use a different software that I'm not familiar with. Thanks for asking!

@garyclifton2180 2 жыл бұрын

@@TheLawnmowerLady IV just got a Peugeot Metropolis 400i three wheel scooter trike my son was behind me saying it smells bad of petrol I no he's never change the air filter could it be that Ur a bigger problem it's a 2016 model.x

@TheLawnmowerLady 2 жыл бұрын

@@garyclifton2180 It certainly doesn't help. Less air in the intake will cause the ECU to deliver more fuel. Some folks claim pulling the negative lead for a few hours re-sets the ECU. Won't hurt to do either one of both. Good luck!

@garyclifton2180 2 жыл бұрын

@@TheLawnmowerLady thank you Stella but when I put the lead back on should every thing work again x thank you x

@wilenelson1810 2 жыл бұрын

Happy Thanksgiving 🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸

@TheLawnmowerLady 2 жыл бұрын

Same to you!

@cliffcowdell9760 2 жыл бұрын

Where would you purchase these parts? Thanks

@TheLawnmowerLady 2 жыл бұрын

Thanks for watching Mr Cliff. Depends on what your are trying to repair. I went to the Suzuki dealer to get that fuel grommet for that small motorcycle. Once you know the dimensions of the grommet, you will need to do some parts diagram searching, keep an eye our for moped shops. I have used a moped part for a generator. Once you get into the newer imported machines, it gets more difficult to find the right parts. Cheers!

@LUNARIAproject Жыл бұрын

I purchased a 2006 model moped recently and it ran quite bad on high RPM and especially in 4th gear and wanted to die after a while so I took the carb apart and noticed that the petcock never shut off the fuel even though it is in off position. So I took it apart and noticed the gromet inside was quite worn, I made a new out of cork material but to no avail, the fuel just goes directly from the tank through the petcock and down the carburetor, I just poured a little fuel into the empty tank to test it, I have a transparent hose so I could see it pass straight through the petcock no matter what position I put it in, so I took it apart again and made a new gromet that only had 2 holes (originally it has 3) this time the fuel didn't come through at all, but it didn't pass through when I turned the arm either so still not usable. I really wonder what could be wrong? So the hole on the right was the one I shut off and the fuel didn't come out at all. I really wonder if I could fix it somehow, or is something else causing this problem you think?

@TheLawnmowerLady Жыл бұрын

You need to measure the grommet, and look for another at a moped shop. You need to get one with the same number of holes. Worse case is just buy another fuel tap all together. Thanks for watching.

@LUNARIAproject Жыл бұрын

@@TheLawnmowerLady Thanks for the reply, OK so you think a new gromet would do the trick even though the one I made out of cork didn't? I noticed on the rubber gromet there are some lips around the holes, are those the thing that makes it stop the fuel from going? And also, the holes what purpouse do they serve, is the fuel going through those holes or is it air that goes through it to open up which passage to let through the fuel "in the back" or enclosed pipe?

@TheLawnmowerLady Жыл бұрын

@@LUNARIAproject Those holes direct the fuel flow to the correct circuit.

@LUNARIAproject Жыл бұрын

@@TheLawnmowerLady Ok I understand, so would it be possible to block the passages of some of the holes so that lets say only the reserve would work so the other ones would be turned off? I have the reserve at top, if I block the holes with something would that work ou think? And if so what could I use to block it?

@TheLawnmowerLady Жыл бұрын

@@LUNARIAproject Not sure I understand. Turning the fuel tap to the reserve position (assuming you have a working fuel tap) blocks all the other passages. No need to block any other passages.