I keep my funel in two plastic bags and that keeps it clean year around

Brilliant tutorial and the ground release just happens to be what's wrong with my Old Trojan. Thank You!

I have shirts and jumpers like yours too; as Seinfeld said, wear them until they "float away"...

Great info and correct teaching without misinformation! Thank you!😊

Your video was very helpful. I especially like that you showed how to take the cover and what to test for. Mine was starting intermittently so I have spark so then I suspected the control cable wire was somehow the problem. Your video helped point me in the right direction to test mine out. So now I just have to locate a new cable and hopefully will be good to go. Thanks again for a very informative video!

This fixed mine. Thanks! Cable had stretched.

My shut off cable was stretched out and I just put a hd tie-wrap around the handle and cable to take up the slack on the cable.. thanks for the tip. running good now.

U are the man great video and thanks for sharing with us this appreciations 👍🙏🇩🇰

Thanks for this video Arch. I just subscribed. Love the tutorial. I have the same exact issue with my mower where the bail/bale cable is binding. Ordered replacement cable and I remain hopeful that this will solve my no spark issue as well. Even if it doesn’t your video has loads of information that I can glean from! Thanks again!

Great video….in almost all machinery is in metric sizes. If you are still in imperial, get the right tools.

Bravo my friend. Please keep the repair videos coming. Excellent video. Thanks for sharing with us.

Nice video Arch, that's the way to troubleshoot. 👍

I just bought a craftsman lawnmower yesterday and did everything possible from cleaning the carburetor replacing spark plug and yes there was spark I even removed the coil and clean it up to cleaning the fuel line and fuel tank and still no start but I didn’t check the cable smh how could I forget that thanks for the tip 👍

Nice job. Thanks.

Nice Arch!!

Thx , just found your channel. I subscribed. Great stuff

Well done ! The B S Q series are the best . Too bad the OHV 's aren't as good .

great video

Hi good day love all ur videos great work I have a Subaru sp170 ridgid pressure washer it starts when he want too change carburetor change coil pack change oil I tear it apart check everything still the same can U tell me what next to do plz Greatly appreciated it

Great video, picked up a couple of craftsman machines last week so this will come in handy. I do have a question. When you manually spin the engine for the spark test and previous videos check the compression, what attachment do you use? I would like to purchase it for future troubleshooting purposes. Thanks!

nice video!

Some of the cables can be adjusted to take up slack or tie a not in cable

Whats on the end of the vice grip fuel hose crimp tool? How would you compare Super Clean with Purple Power?

I injoy vedio

I picked up a free Craigslist 190cc 1993 brig's and Stratton lawn mower. I checked for compression it was 55psi. I used spark tester and spark plug light came on when i zip tied open the clutch cable to stay open because the linkage cable is bent, so it's not the coil even though its rusty. I already cleaned the carburetor which had green mold inside the carb which I'm assuming it was not started in a long time and had old fuel. But it still won't start. So then I removed the carburetor and added small amount of fuel directly where the carburetor sits and it was shooting flames and some what chugging which was not doing before but it did not sound like it was running. So im confused was it running if it was shooting flames? Does it need a new carb, sparkplug or is timing misaligned

I temporarily wire kill all the way back and try it before I tare into it

Clean --inside and out ! Dirt is the enemy 😁

Hi Arch After hitting an obstruction, my Briggs and stratton is not getting any spark. I have checked the key, the cam gear. the kill switch, thecoil and the magneto. What else should I do other than buy a new one ha ha

First thing you should have done is check the oil. Over filled will not allow the engine to start. Takes one minute and can save a lot of time if that was the problem from the start.

Yo Unk. Man I've tried everything. Replace carburetor, plug, ignition coil, fuel line, oil change, new gas, still no start. About 2 months ago I pulled the cord and it snatched out of my hand. It lifted and dropped the mower. I unplugged the spark plug and moved the blade by hand to loosen it back up. Has not started since. I looked at the cable and it didn't looked stretched. Last night I removed the motor and I plan to see if the camshaft is broken. Oh i checked the flywheel and timing too. Waiting on the puller to come so I can get the blade adapter off. If not that I'll try the cable. Can it look good but be damaged?

I have a little Hyper tough from walmart that kept stopping. That possible cable issue slipprd my mind. I messed with that thing for an hour and kept having thr same problem. Drove me nuts. All of a sudden it hit me, brake cable. Problem solved. Brain fart Ha Ha

How did it start with the spark plug out?

Was the mower in this condition when it was sold

Yes I can smell it in my imagination.

Yes i can smell through my screen

It was yours

Fuck me it sound like a F16😂

Video should not be 26 mins long I just want my lawn mower to start….

So you sold a dud lawnmower lad🤔