#247

No video

#247

Рет қаралды 12,086

3 жыл бұрын

We have another Kenwood with dots on the display
Support The Radio Shop on Patreon;
/ theradioshop
Follow mw on lbry.TV:
lbry.tv/@TheRa...
Contact Information;
gokarters.com/s...
Discuss this on my website;
www.gokarters.com/smf

Пікірлер: 57

@RadioWhisperer 3 жыл бұрын

Another great video Buddy, thank you! I recently acquired one of these for a song because it has issues like this. Turned out to be the batteries were dead and main encoder needed to be replaced. Thanks so much for putting out great content! I have a ham radio repair business and your videos show me common radio issues with makes and models I might not have had cross my bench yet. Helps keep bills down for customers. I only do it part time as a service to our fellow hams. Helps keep folks on the air. Have a great day and thank you for keeping repair alive!

@cuban9splat 3 жыл бұрын

Great job good advice, Buddy. Thank you for taking the time to record your work and post it so we can watch over your shoulder. 73 de K7RMJ Frank

@TheRadioShop 3 жыл бұрын

Thanks Frank. Sometimes I do not think about the simple things that can be shared.

@Joe-KN4IFI 3 жыл бұрын

Great Tip video Buddy thanks. 73 Joe

@JT-py9lv 3 жыл бұрын

YES ! Thank you. I jut picked up one of these radios in PRISTINE condition for $150. So far, so good. Keeping my fingers crossed.

@alpcns 3 жыл бұрын

These modern rigs are no doubt quite capable, but the old steam-and-coal powered boat anchors were pretty robust and reliable too. Always a pleasure to see a experienced pro work their magic.

@TheRadioShop 3 жыл бұрын

Agreed!

@boxingday11 3 жыл бұрын

Thanks Buddy 👍❤️🇬🇧

@GeorgeWMays 3 жыл бұрын

Thanks for another interesting project. Enjoyed and appreciate it.

@TheRadioShop 3 жыл бұрын

Thanks George

@lylewatts6370 3 жыл бұрын

I also have 2 of these radios, one works great except for the auto tuner and one for parts. Used it for my main radio years ago. Previous owner installed a roofing filter that made the sound muffled so I removed it and return the unit to stock conditions. Very nice sounding radio but never could it beat my TS-830s. Thanks Buddy for another great video. Love these old radios!

@TheRadioShop 3 жыл бұрын

That TS-830 is a hard one to beat!. Thanks Lyle

@ChatGPT1111 3 жыл бұрын

Buddy, glad to see that you are still around and doing well. Really like your videos and the detailed way you explain your troubleshooting. Cheers and best regards. 73 de KI1Y

@jdmccorful 3 жыл бұрын

Thanks Bud, good tip. Could also be used on similar equipment would be my guess.

@TheRadioShop 3 жыл бұрын

That is true

@dann2ptf 3 жыл бұрын

My 440s developed the same dot problem. Cleaned the pins on the eprom and started working again. A service bulletin came out on that radio to have the eprom soldered directly to the board, eliminating the socket, which solves the problem. Later serial numbers had this done. I knew it wasn't the conductive Sony Bond issue, because mine was a refurbished unit from Jahnke Electronics.

@hornhospital 3 жыл бұрын

Perfect timing! I had watched the "down the rabbit hole" video and wondered why you never did a part 2. Now I know! I'm going to try the EPROM pin clean tip and see if it helps my TS-940SAT. Love your vids, I've learned a lot over the years!

@TheRadioShop 3 жыл бұрын

Thanks, hope it helps

@bblod4896 3 жыл бұрын

First again? I better play Lotto. IFR LIVES! Have a peaceful Sunday Buddy.

@hestheMaster 3 жыл бұрын

Great tip on a socketed EPROM issue.

@TheRadioShop 3 жыл бұрын

Thanks

@bblod4896 3 жыл бұрын

Another tip, recap the power supply board (small board above the two large main capacitors) friends Kenwood had noise on the ps rails, affected receive. After replacing the pregnant capacitors, receive became much quieter.

@TheRadioShop 3 жыл бұрын

Better yet, replace the whole board, these are a disaster waiting to happen.

@bblod4896 3 жыл бұрын

@@TheRadioShop I agree. $$$

@crgrbrts 3 жыл бұрын

Hi Buddy. Please check out the advantages of the K6IOK power supply upgrade kit. Many TS-940S owners, including me, have adopted it and saved this fine transceiver from its almost inevitable self- destruction. I am not associated with the designer and vendor of the upgrade kit but am a big believer in it. Thanks for the fantastic videos and generous sharing of your expertise.

@RadioWhisperer 3 жыл бұрын

I will check it out for my TS-940s. Thanks!

@PapasDino 3 жыл бұрын

Ditto for the Compudigital power supply replacement...they also have memory batteries and S-meter/sub-display LED replacement kits available as well. The AVR unfortunately board is a disaster waiting to happen. Interestingly the two big filter caps came out and showed just fine on my ESR meter but still glad I did all the mods...the radio should be good for another 30+ years now. BTW, there's a great Groups dot io user group for Kenwood TS-930/940's; search for "kw-ts940s". Several excellent Kenwood techs hang out on that group. 73 - Dino KLØS

@RadioWhisperer 3 жыл бұрын

The power supply replacement is kind of steep at more than $300.. What problem does the replacement solve?

@PapasDino 3 жыл бұрын

@@RadioWhisperer IF the main supply fails what happens is that you put 40VDC throughout the transceiver and fry a bunch of stuff. The original power supply assembly runs very hot even when only in the receive mode. The server rack style supply that replaces the main transformer and associated circuitry is meant to loaf along providing 28VDC to the finals as well as the custom AVR replacement board with separate switching regulators for all the other associated required voltages. Bottom line is that it's meant to prevent catastrophic failure and prolong the life of the transceiver. I bought my 940S new in 1986 and if I amortize the cost over all those years and add the supply mod it's really not that expensive...the 940S still today has one of the best receivers around. Subscribe to the Groups dot io group and read the messages related to the replacement and I think you may come to the conclusion that it is in fact a worthwhile investment, to say nothing of simply adding to the resale value of the rig as they still bring pretty good prices. YMMV but I don't regret having done the replacement.

@RadioWhisperer 3 жыл бұрын

@@PapasDino Great info well presented. Thank you for clearing up why this is worth it. Looks like I need to grab one of these.

@user-zh5sj3nl3n 3 жыл бұрын

good👍😄

@N5KDA 3 жыл бұрын

Buddy, I had a problem very much like that after installing a 1.2GHz module in a Kenwood TS-790A. The issue was only on 1.2 GHz. I got a copy of the service manual and found the voltages were off inside the module. After realignment the issue went away and has not returned, yet.

@TheRadioShop 3 жыл бұрын

Thanks for sharing that information!

@VintageElectronicsGeek 3 жыл бұрын

Looking forward to the IFR repair...wonder if thats whats wrong with mine? Wanna work on another? :) ~Jack, VEG

@TheRadioShop 3 жыл бұрын

Hey Jack. Lets see if I can fix mine first lol.

@hughmc5419 3 жыл бұрын

Leaky caps, is there a screen saver, set wrong . Driver board for the screen ? Hugh's hunches

@rickgunther7328 3 жыл бұрын

Same thing on my 940.

@mr.fantomas7726 Жыл бұрын

All are looking for a repair PLL ,VCO and uPC board ,but still nothing. Have some an idea???

@Dave5783 3 жыл бұрын

I might have a fix for the 520 I will call you

@johncundiss9098 3 жыл бұрын

I own one of these 940's. I have an issue with intermittent S meter is all. will that EEPROM affect just the S meter? Love the video. Always learnin' me something.

@TheRadioShop 3 жыл бұрын

Hi John, Most of the time when the eprom has an issue there are many things that happens other than the s-meter. How ever if just the s-meter is not working there is a few things to look for. S-meter adjustment pot dirty, Fast / slow / off switch defective, check the capacitors on the back of the IF board. They may be held down with a brown looking glue (Sony Bond). Lift the capacitors and remove all traces of that stuff.

@garydanford220 2 жыл бұрын

Watched your video but on my 940 the sub-display isn’t working. Is it hard to replace. and do you have a usable sub-desplay

@w.rustylane5650 3 жыл бұрын

I have an issue with the S meter on receive on my Kenwood TS-430S. It works on transmit but not on receive. Any ideas??? 73 from K9POW in eastern Tennessee.

@jerryrogers7622 3 жыл бұрын

Hello Buddy I have a TS 940s problem maybe you can help with. on 40 mtr I was getting good swr 110w out since I purchased it 2 mo ago. Now its over 3 to1 and 20 watts out. I connected a dummy load and it shows perfect 120w out. as all the rest of the bans check out the same. I have 20 and 40mtr dipoles. I went all new with the 40m wire coax and 1:1 Balun. Same readings 20w out 3.5 to 1. My 20m inverted v gets almost 1:1 Any suggestions. Thanks Jerry

@hamoperator6014 3 жыл бұрын

I have a unit like this only problem I currently have with mine is the radio is staying in tx mode when powered on, not sure what might be causing this. 73’s

@leftover1955 3 жыл бұрын

do you have a vid on the power supply

@eagleeyex2939 Жыл бұрын

Its my dream radio im 50 years old i cant affoard that i hope any one sand me as gift Its my last whish😢

@j204ever5 Жыл бұрын

10:43 There is no S-Meter Reading!

@Jeremy-vt2in 3 жыл бұрын

I'm having this same issue with my TS-790. I have dots on 2m, on both MAIN and SUB. I've tried resetting the processor, no luck. Do you know of any common failures with the 790 144PLL circuit?

@Jeremy-vt2in 3 жыл бұрын

Ended up being a short in the VCO trim cap on 144PLL board