Much love brother. Youl get your order super fast if your in NY. Thank you so much brother !

I’m going to do more testing to find out exactly what the applications are for the other inlet adapters

Lovee the red lights in the background

Shits fire man ! Shout out to Collin very cool dude !

I’m actually going to be releasing a line of super cool custom pre built aegs dropping really soon. If you don’t want to dabble with the upgrading these aegs will be pre upgraded heavily. Believe it or not your stock hop unit is great but the bucking and barrel is not so good. You can install this new hop unit with a maple leaf mr hop bucking and you will be happy. But again you can use your stock unit and uograde the bucking and barrel

Thank you so much !

W girlfriend

@@LuhShmunky2 fr

Completely unrelated,but which website do I go on to find a gf like you ,please drop the link ?

Yes they do for sure just grab a Maxx nozzle to go along with it

@@TheRealDealAirsoft ty! any hint which lenght should i buy for my vfc 416c?

Go with the adjustable nozzles ,the 19-22 mm is perfect, I think the max recommended nozzle length for this hop up is 21.25 but they vary slightly due to mass manufacturing

It would indeed work with a g&g arp9. Tho the stock hop unit is good too The nub all depends on what type of bucking your using / set up. If your using traditional rubbers then use the hop nub that has the soft type nub if your using a mr hop or r hop use the default hop tensioner

@@TheRealDealAirsoft Thank you for replying! That is good to to know. I am using the stock bucking but might upgrade to the Prometheus Bucking. Is that a good bucking?

@@TheRealDealAirsoft u think flat nub works better with mr hop than the concave nub? I run all the metal concave nubs with mr hops currently

Prommy purple is an ok bucking , kind of old tech now a days. Prommy ourple will not fit in Maxx units but should fit in the stock g&g unit

So I also used to use the metal hard concave nub but I found an issue here and there that in the past with previous models , some times the sharp edges would apply odd pressure and sometimes ide have consistent flyers to either the right or the left. Then I would lightly sand the edges to make the concave more smooth and less sharp on the edges. With the soft nub that issue isn’t a variable anymore. Granted you might need a higher level of hop but it’s very controlled and precise. I recently added the 6mm soft nubs to my next order so upon the next Maxx delivery for real deal we’ll have the 6mm soft nub for testing

You don’t need to be exactly the same barrel length in reality if you get a 363mm that’s only 23 mm more 23 mm is .9 of an inch. One inch. Even with a tracer unit you will be good it won’t even effect the sensors. Get a 6.01 or a 6.02. We carry the hop unit on our website www.therealdealairsoft.com

@@TheRealDealAirsoft won’t it stick out of the gun more?

Shipping would be 30 USD. To much for my comfort. Any other very good hop ups you recommend

@@hippo_3976 where are you seeing $30 shipping? That’s expensive

@@hippo_3976 stock barrels do not run to the full length of the outer barrel

Brother , you need to read product descriptions before buying parts. Part of Maxx Models new line of hop units, they specifically made a unit for each platform. They made a unit specific to HPA POLARSTAR systems. i doubt the system will perform as consistently, there are differences in the specs. If you ordered from my website, then email me with your order number and we’ll send you the correct one. If not then contact the store you used and request to have the M4P sent to you. There’s no reason why you shouldn’t get what you want. If your spending the money might as well get the correct part. Youl be happier in the end

Get the adjustable nozzle from Maxx,the 19-22mm ,since they have those windows you can exactly see how far in and how far out it goes ,fixes your feeding issue and also gives it a perfect air seal

When you use a Maxx hop unit you need to use a Maxx nozzle. Maxx hop units require different nozzle length Just read Maxx instructions. With krytac 21mm nozzle always works perfect with Maxx hop unit

Cause he sells them on his site, and gets information faster than others since he is a seller

He's the real deal,simple as that

Yes it will work for your aps m4 grab a maple leaf bucking from my website also they work best with max hops

@@TheRealDealAirsoft yes deffo a maple leaf. I currently got a ZCI barrel 6.02 stainless with a Mr HOP maple leaf rubber 60 degree hardness bucking. I also have the omega nub but everyone doubts them? Will the Maxx hop give me the new best nub for the Hop rubber? Thanks for getting back to me fast.

I’ve installed a handful of these with maple leaf mr hop and no issues so far

It can be fixed just by turning the barrel a bit to the right, or maybe reinstalling the bucking if it doesnt sit properly. Another option is to buy a 7mm nub and cut it to your right window messure, sometimes 5mm nubs are smaller than you really need, omega nubs from maple leaf are small, and the maple leaf patch sometimes doesnt work well with OEM barrels, the maple leaf combo works flawless together (rubber, nub, barrel) but if you mix them many times doesnt work properly. I had this issue when using a retroarms hopup chamber, it comes with a nut instead of a shim to secure the barrel and preventing it from floating, if you tie this nut too much it tends to rotate the barrel so i had to turn the barrel a bit to the other side and solved the problem. Some times, with cheap barrels and chambers, the cuts on the barrel are not perfectly alined so when you instal the C clip to secure the barrel to the hop up chamber it rotates the barrel so the rubber patch is not properly siting on the barrel window causing this type of issue. After all of this, best solution??? Flat hop a bucking, and custom homemade big nub made from a plastic tube from a pen, you only need to choose the hardness of the bucking in order to the weight of your ammo. I use 50º silicone maple leaf to lift .28 really easy

@@fubene5495 im curenntly using the krytac orange oem bucking and nub with a promy 6.03 387mm barrel in my krytac crb. actually its performing really well and consistent with the oem hop up unit. was thinking about getting the 2021 maple leaf 60 degree silicone bucking do you have any recomendation as a hop up combination? just fitted a gate titan and my warhead brushless is on the way too :D

Amazing combo

Soft square one as far as I understood :)

Maxx sells different inlet adapters. Screwing it out is a bad idea. Vibrations will change positioning

No they just don't know how to set it up properly. I have the m4a and it's awesome. They just sound lazy to me

It is Included in the unit. It comes with the kit. www.therealdealairsoft.com/products/maxx-model-hop-up-chamber-m4a-pro-red?_pos=1&_psq=m4a&_ss=e&_v=1.0

Kwa and Maxx … forget about it

@@TheRealDealAirsoft Not true. MAXX M4A will fit into a Ronin T10

@@heroislegend Did you have to modify anything for that fitment?

Yes just use a Maxx nozzle. Each would work 21 / 21.25 / adjustable nozzle each bucking and set up is different but generally speaking the 21 mm nozzle almost always works with Maxx setups Also use a maple leaf bucking as well www.therealdealairsoft.com/collections/hop-up-units

They will be rolling a Module for these units soon

Yes they will work you will need a 21 mm Maxx nozzle tho www.therealdealairsoft.com/search?q=maxx+&options%5Bprefix%5D=last

Honestly it will be fine. It has a super wide range of comparability. Just use. A maple leaf bucking with it and your good we carry them in our website

What nozzle and bucking r you using ? You need to provide more info man

@@TheRealDealAirsoft sorry, new here. Stock emg F-1 bdr 15 parts

I never use that bucking. Only maple leaf

@@TheRealDealAirsoft got a link to the one you use? And what nub do you use with it on this hop up

Tes

Yes

It’s like a .9 mm screw

@@TheRealDealAirsoft thanks! now what is the actual screw size? I would really hate losing that, i need to prepare a spare.

It’s a hard no for KWA

Yes but with flat hop you may want to apply more pressure so the best route is grabbing the maple Leaf Omega hop nub because that set up is able to apply a ton of tension the stock flat is more soft and will require like level 9 hop

www.therealdealairsoft.com/products/maple-leaf-omega-hop-tensioner?_pos=1&_psq=omega&_ss=e&_v=1.0

@@TheRealDealAirsoft ok, lucky me i already got it coming in. I also got the modify baton ryusoku flat nub too

Yes but use the reccomended nozzle

@@TheRealDealAirsoft which size?

The m4A is designed for AEGs specifically www.therealdealairsoft.com

@@TheRealDealAirsoft great thank you so much

I’ve been trying to get begadi products. Very difficult

What nozzle are you using

@@TheRealDealAirsoft I am using stock air nozzle. I also tried my other m4 with a 21mm air nozzle and same thing. I did figure it out. I applied white Teflon tape around bucking and that created a better seal.for some reason there was air bypassing the hop up and bucking.

Lmao it’s not about fixing problems it’s about offering a better product that’s mad funny tho

This is the only video/review I can find on this hop up

Lmao