I'd looooveee to see you making an actual build with this case!

Seems rather silly to make such a cavernous basement inside the case and yet make it slightly too small for a 360 radiator.. Weird design choice that...

Bingo!... Excellent video! I just started looking at this case to do exactly the kind of water cooled presentation you're talking about, and almost exactly the same ideas for mods. Thanks very much for the confirmation! :) you got my sub for this one ;)

Cheers Guv for another meaty review!

My gran used to live in something smaller post WWII.

Thanks for your review! Have purchased this case & had the same question. I'm looking to run dual-360mm rads & like the idea of lateral air movement. So, if they offer a set of 2 vertical rad brackets. I've emailed TT the question. I can update or vice-versa, if you have any further insights?

Nice case if you don't think of that thumb screw , removes the need of a GPU riser and support for horizontal mounting. It's a big case at a big price, roughly 300...

i like to install radiators on the top since heat rises, whats the largest AIO you can put on the top 240?

I would just Dremel out that whole PSU mounting shroud, and have the PSU on the floor of the case around back, and you might be able to still use the Grommet area. I love all the options of that case!!

Hmm I preferred my Tower 900. Liked the idea of having a nice back compartment for radiators and thus made sense to have those mesh on the side be at the back. So far I'm not a fan of the smaller cases of TT Towers

I wonder how hard would it be to drill out the rivets for the main motherboard tray to move it forward. Then there is room for dual 360 rads on the back side panels like the Tower 900 right? I think that would have been a much bigger win than putting the rads up front. Good video BTW. Looking for a case to replace my Mozart TX and this is in the running.

I can't see how external cables are attached to the MB rear panel ports. I'm wondering about the rear where the Display Port cables go into your motherboard/cards. Please let us know.

I'd love to mod this case by taking everything off the top part and cutting it down in almost half and lay down the motherboard. Make the 2 sides all mesh for 120mm-140mm fans or radiators and top the same way. I would make it similar to the Cooler Master HAF XB EVO even adding a CD player to hear my 70-80 tunes.

Man I love your videos. Wish I could meet you someday and buy you a beer

could you place a universal vertical gpu mount (coolermaster) to show the gpu forwards?

Tiny? Nah you're a Short King, Great review/info. 😀

A case that size could have held a lot of hard drives in that bottom chamber, a feature that is missing in a lot of cases these days. One could have built a small office or home server with it.

I thought that u could maybe like remove the bottom in the caninet and install an infinity mirror

i had to look twice as i really thought this would be a 3D Printer review by OC3D 🤣🤣

Really like to see a SFF version of this case.

I would love to own the white version as it would be the perfect case for Me to modify and make it into a nice Desktop PC. I would gut the entire top and back and change the layout and have the motherboard tray Lay down on the bottom above the hidden Bottom. It would look similar to the Cooler Master HAF XB EVO but smaller. I would cut it down and eliminate the side glass and have open mesh for fans and cross air flow, add a CD player to the bottom right to listen to my 70's songs, and have a top 240 or 280 Radiator. I love the I/O but would try to put in the Bottom where it should have been to start with as it is For Desk Top Use and where it is as is ,Who would want to stand up just to use the front I/O each time.

are you going to review core wp100?

I want to use this case for my Plex Server, wanna do a repaint to make it look like an old school popcorn machine 🍿

I wonder how many people will put the 360 rad mount in with rgb fans just against the glass

looks like you could live in that

I was just looking at the Tower 900. This might be better.

make a standoff/use standoff for the back panel, then you will have nice air clearance all around the back, and give you, that extra room for second psu.

Any way you can see turning the GPU 180 degrees? That way the GPU fans face the front panel?

Will the 4090 fit in this?

Fill it with cans and fans for the summer

It kind of looks like a huge Macintosh SE... or... a arcade claw machine. Those some pickachu stuffies in it. If I were running it, I would leave it on it's back with the glass off and the rear graphics cables coming out at me. For e sy access. YOu practically need that case permanently sitting upon a lazy susan which is a problem.

👍🏻

i can't believe when they designed this thing, had it off just a smidgen, that you can't put a 360 rad, horizontal on the bottom? Case builders , should start with e-atx boards and 360 rads, then build a frame around that.

Really like the look of the case but the airflow design just seem really dumb even when you use water cooling to essentially cheat. Its got random and weirdly shaped holes for air pressure to escape on every side of the case even if you replace as much mesh with glass as you can. At best the main chamber cause air to flow upward but only upwards into the open space of the case rather than through the actual components, which would be fine if you could actually pressurize the case without air leaking out out the bottom, sides, back, and top. Cooling the back of the Mobo would be a novel idea if main chamber and back chamber were essentially disconnected from each other besides the grommets but they aren't so they affect each other in unpredictable ways. Any attempt to make positive pressure will have you finding that for every intake a non-0 portion of the air being pulled in would take a 180 turn, and flow right back outside the case. Water cooling forces every fan's work to be applied directly to the heat that matters most, but that still leaves all the non water cooled components holding the bag. Not to mention custom loops are expensive AF and take way more work. This case gives a lot of excuses to use cheaper and more efficient "ugly" fans but at best you would need a lot of mods and experimentation IMO to make it work efficiently as possible.

This case is a positive modularity nightmare... :D

I enjoy your reviews. I make sure to watch the entire video with ads every time. I will have to say, Thermalfake, Shall we never forget!

I did a set of side panel reservoirs for customer once on his Tower 900. They turned out amazing. If your interested in doing a custom build in this chassis, I'd be willing mill up a set of them for yuh. Shoot me an email if your interest is peaked and we can figure something out.

😘😘😘😘😘

This case is so huge, it makes the Tower 100 look like an oversized cereal box. 🤣

How about some goldfish 😂 cases are starting to look more and more like fish tanks!!

Anyone tried fitting an Asus Prime Z690 in this, or a standard size mobo?

Trying to justify getting this case, and where to put it.

🤔 It reminds me of a popcorn maker.

Ding

nice case but the big ? is how much does it cost more than my car probably 🤣

I think someone at ThermalTake spent lockdown high AF

did you say tiny tom? XD

Looks like a popcorn machine

You'd have to mod it - and heavily at that. Thermaltacky are forever either garbage or ill-thought out crap. This review cheered me up no end! "Thermaltacky Tower 500: a case barely alive. We can rebuild it..." Six Million Dollar Man meme intensifies. 🤣🤣🤣🤣

When you buy a thermaltake you are buying an experience. A really crazy, stupid, nonsensical experience but experience nonetheless which you mod the fuck out of very easily. 😂

You're reviewing Thermaltake? Jesus, times change. What happened to thermaltacky and all that? I've never even considered buying one because you were so opposed to it.

Far better lower cost cases available that this expensive ridiculous monstosity.

I wont look at thermaltake after what they did to CaseLabs.

You do realize this is the same company that ripped off Case Labs - a company that unfortunately went under yet had a far superior product. TT needs to be on your blacklist mate.

It's too big and too small at the same time.

Looks like something you’d see in the cinema lobby filled with popcorn. Really not feeling this one at all - it’s hideous 😆

hello mate if you want send me as a gift this case I will take it

Kinda looks like a popcorn maker or somting like a fishtank... dont like it atall....