That style of engine and carb is the best!!!!!

Yes, I would buy one of those "monster" edgers if I had a large property with say a long driveway with lots of lawn edges or a corner block with heaps of lawn edges. Doing large areas of straight edges with a line trimmer is nuts and a sure way to get a sore back especially if you have Buffalo or Kikuyu grass!

I found a free one this year and restored it. Plan to use it to edge out planting beds in the spring rather that use a shovel.

Once this style was all there was. I almost want one again. I used to be fast and good with one of these (1983).

I run one of these for myself, I absolutely love it(long driveway)

I love these edgers!

In my geezerdom it was getting difficult to edge with a string trimmer. i was fortunate to find this same model of edger on FB Marketplace for $35.00. Brought it home dismounted the tank and carburetor. I took the carb off of the tank cleaned it, new filter and it's good to go.

I sure do enjoy your videos. Always helpful. Thanks again.

I wouldn't mind getting one of these honestly for doing the garden prep and figuring out where I want to have stuff go. As well as other future projects. I can see where one of these would be really handy. I just have to find one in my area for a good price or free.

I've always preferred the cut & finish of an edger like this over that of a string trimmer. I own an old McLane edger that's proven reliable for decades, but I also have some string trimmers as well since there's trimming work that an edger is just not appropriate.

I have a similar Troy Built edger, and I greatly prefer it over using a string trimmer for edging. The string trimmer can catch and before you know it, you have gouged an arc leading away from the edge of your driveway or walkway into your lawn. These walk-behind dedicated edgers are far easier to control, and I find them less tiring than trying to hold a string trimmer turned around and up in the air for edging. That being said, I've seen many pros edge with a string trimmer and once you've developed the skill, you can really move right along! Take care and God Bless.

Another good video of yours on small engine mechanical refurbishment. I love your attention to detail on even the smallest of parts, I have started applying some of your techniques to my own small engine refurbishments like taking the wheels off and cleaning/lubing the axles, makes a surprising difference in reducing pushing effort. I will also start adding lube to the flywheel brake mechanism as well:-)

Yep, I have a Husqvarna version of one of these monsters, purchased second hand for $50.00, probably a decade or more ago. You can’t beat the clean, deep gap they cut between your grass and your concrete driveway or walkway, plus - they make short work of a badly overgrown yard that has begun to grow over the concrete compared to trying to use a string trimer turned sideways. True, I don’t pull it out each and every time I cut the grass and sometimes I cheat with the string trimer when the edging is not too bad. But, at least 2-3 times during the growing season, I do drag out the old beast and put down a nice, deep, wide edge with it … and kick up a few sparks with the blade hitting concrete along the way; but no harm, no foul! The little side shaft Briggs has never failed to start. Yeah, it does take up a little badly needed space in the garage and I definitely would not be willing to pay $400 plus for a new one, but for half a buck used, I still love having and using it, so it’s well worth it’s keep!

Good video, I wish you were closer, I have a customer looking for one of these. Currently I don't have any and have not seen any around my area. Thanks for the video.

ive owned 2 of these type of edgers and have never spent any money to acquire them. They work well if your concrete has a nice edge

My neighbor gave me one of these a few years ago. Doesnt run but i haven't had time to fix it. But now i see how easy it is so maybe ill get to it this week.

I got one with a Tecumseh engine on it thrown in for free when I bought a mower to restore last summer. I took the engine, tires and handle hardware off the edger and scrapped it. Replaced the cast iron flywheel with an aluminum one and used the engine and handle hardware on a Craftsman mower deck that sold right away, used the wheels on another push mower that also sold quickly. Had I restored that edger it would probably have been sitting up for sale for a very long time until I gave it away, I don’t think many folks use them anymore. That starter handle is from an old Briggs vertical pull start engine btw, haven’t seen one of those in a long time!

Easy fix, I usually use dry wipes to get that last bit of fuel out, I have a few of these but haven’t used much, I think I need to use them more 😊

I have one of these. Bolens brand w/ tecumseh engine. Picked up used. Worth every penny!

They're not for me and not enough driveway or sidewalk to need one.. I did mine and two neighbors sidewalks for the 1st time over the summer and used a Sawzall .. Did a fantastic job!

I love the push edger I have 2 in bout to get the new toro push edger

I would use it, but not often. I had a small gas powered one many years ago that had a 2 cycle engine and lot patience with it. I now use a plug-in electric for the driveway that I bought at a garage sale for cheap. If that was in my area for cheap, I'd jump on it.

These are good for straight runs not so much for radius cutting, depending on the curb they can do well trimming those. The three cutting blades are easier on the concrete. I had one given to me and got it running, also a new blade and belt this year, I like it. .

Had mine for around ten years. had to replace the carb once.

I live out in the country so I don’t need an edger but those are easy to use because some string trimmers are a little heavy at least with these you just push it that’s the same reason I bought a trimmer mower because all you have to do is push it you don’t have to carry it around I’m sure there’s people that will buy that edger especially with a real good engine like that one

I have an edger attachment for my Echo power head. So I probably wouldn't buy one. However, I also came across an abandoned power edger similar to this at the local dump. So I took it. I haven't fixed it yet, but I figured that since the amount of edging I need to do now has increase by about 3X, a power edger makes sense. Mine is not in as good a shape as this one, so I don't know if I'll be able to fix it or not. It has the same engine, but in the 3.5hp version. At the least, I'll keep the engine.

I have one from Big Orange. They are not even selling this model anymore. Once running it does a great job. I like the cut. I don't like the fact it takes a shot of carb spray to get it going. But it's only once a year for me. 2023 I opened up the Pilot jet. I am hoping for a better 2024.

I have a McLane. Much prefer it over the trimmer

3.00 dallor carb kit and can of paint plus new belt and oil change Total 35 buck and looks new 😊

I could use one of those edgers, but I can hang a string trimmer from the ceiling and I don’t have any more floor space in my one car garage

When the fuel goes bad, the carb suffers too as these have a little bowl like area where the fuel still sits. The other disadvantage is the stupid idea of using a pump. Gravity feed is all you need on most small walk behind engines and yet Briggs was notorious for using these pump designs that make the carbs fail regardless. I also don't like primers and there's nothing wrong with a conventional choke system. If you want a system that works as you describe where the carburetor is separate from the gas, look at anything Honda has produced in the last 20-30 years. They have a key that surpasses Briggs and that's a fuel cutoff valve. At the time you want to put your machine away, you turn the valve off while the engine is running and presto, the gas goes up the emulsion tube and is burned by the engine. If you can't wait, there's a drain plug on the carburetor. A special mention goes to Tecumseh horizontal shaft engines as they often had a fuel shutoff as well.

Free is good

I use a string trimmer but prefer walk behind. Problem is I don’t have storage space.

People buy things and don't take the time to read the owners manual before they throw it away. Probably the biggest thing is they have credit cards.

What clean is it I do the same thing as you and I would like to know what it is please

I edge with my sthil fs40c trimmer but idk if it is not as powerful to edge

Do you guys get Hyundai garden equipment in the US? I have a Hyundai blower that I think needs the carb adjusting, only hits peak speeds intermittently

A vertical shaft edger that is not easy to replace the belt the horizontal style is the best one to replace the belt is easier to do the belt replacement job on the only thing that those engines is not using All of the gas because of the level of the gas to the pick up tube as you said in this video on this machine

I just use the eco tool for edging, it's called: " shovel " !!!

Hey bro what's up? I wanted to ask you which of the two edgers do you prefer to use? I think that I'll prefer to use the edger which looks like the trimmers because they can maneuver better in small spaces than the bigger edger.

I just fixed one up just like it and gave it to my sister 😮 She run her low on oil 😢😢😢

String trimmers are ok not great. I want one of thes

what app do you use to find mowers, weedeaters, etc for free?

What are you using to clean the edger with?

usually have to prime it around 7 times before it will start.

What brand of degreaser/ cleaner do you use?

The people who buy these know: 1. there is a right tool for the job B. they like tools

I wouldnt get one, l have a stick edger and that is definitely the way to go in my book. Lot lighter and easier to maneuver.

Weed eater hurts my back so this is the only way to do it without hurting 😊

NO I WOULDN'T BUY ONE Thank you for the video

I need help, i have a poulan pro model:pp20va46. It suddenly would not start, fully charged new battery, every time i turn the key over i hear a click in the rear of mower where the new solenoid is but will not turn over, the new starter is hooked up correctly as is the solenoid. Any suggestions? I work on small engines but have not had this issue come up. Would the fuse cause this problem if it was blown?

If I get it for free, I would use the engine on a mower deck if no one wanted the edger

Most people in the US do not know how to fix, well, ANYTHING they have to PAY to get things fixed and they learn pretty quick that sometimes it can cost more to fix than a new one. SO, thats often what is done. They pitch the broke one & go buy new. Even riding expensive mowers & ATVs & dirt bikes & such get kicked to the curb. Thats the price you pay for being mechanically illiterate. !

My neighbor had one growing up. I was constantly fixing the thing for him, it was a pain and way worse that a weed Wacker for edging. No way I'd buy one

For some reason, mine starts better with the filter cover off ??

What kind of machine is this? Never seen one here in Italy... Is it to cut grass next to concrete slabs? It seems overcomplicated respect to a basic nylon cord cutter...

We have Edger Blade that may fit your edger. We can provide for free. Do you need?

Those were the worst! Compared to a McLane or Powertrim the twisted belt was an awful design the head barely stays level and the blade runs as soon as you start it . They were an answer to a question that should have never been asked.

I think these are probably better for commercial users. I can’t see a regular-sized residential property needing one all that much. In 2.5 years of doing this I have yet to see one and I have a large yard and small garage full of curb finds.